POWER LINE CHOKES COMMON MODE CHOKES TM0029 Power line chokes can be used to minimize EMI radiated noise in the common mode on all power applications. Bel offers a variety of inductances and rated currents, to provide full coverage of power requirements. ELECTRICALS @ 25c 2000 Volts AC for 60 seconds Isolation Voltage. 250 Volts AC/DC rated voltage. Insulation Resistance is 100 Mohms minimum at 500 VDC. SCHEMATIC Part Rated | Inductance DCR Current OCL (ohm/line) Number Line | (mH)Min | Max 0571-0303-00 0.40 30.0 2.80 0571-0203-00 0.40 20.0 2.20 0571-0203-01 0.50 20.0 1.60 0571-0103-00 0.60 10.0 1.20 0571-0083-00 0.80 8.00 0.80 0571-0063-00 0.80 6.00 0.70 0571-0063-01 1.00 6.00 0.50 0571-0043-00 1.00 4.00 0.40 0571-0033-00 0.75 3.00 1.00 0571-0033-01 1.20 3.00 0.40 0571-0023-00 1.20 2.00 0.30 0571-0013-00 1.50 1.50 0.30 MECHANICALS 1.10(27.94) , | 0.177(4.50) I 0.028(0.71) +/- 0.04(1.02) - Diameter _ *-0.394(10.01) 0.512(13.00) Dimensions are in inches(mm) Dimension tolerance is equal to 0.90(22.86) Date Code and im mt t Part Number ~ bel 0.75(19.05) et +/- 0.02(0.51) unless otherwise stated. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse @belfuse.com Internet: http: //www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 6UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 T204