Reed Relay D1A241000 UL 60950 (File No.E108430) Features Outside Dimension:Unit (mm) 1. Molded epoxy body. 2. Dip type construction with the same terminal pitch as ICs or TTLs simplifies PC board designing. In addition, the high sensitivity allows direct driving by TTL, etc. 3. Automatic insertion compatible. 4. Sealed construction permits automatic flow soldering and cleaning. 5. Diode & Magnetic shield are available. Schematic:Top View Coil Ratings (AT 20) Parameter Rating Unit 2150 ( 10%) Nominal Coil Voltage 24 VDC Maximun Continuous Voltage 28 VDC Must Operate 18 VDC Must Release 2.4 VDC Rated Current 11.1 mA Coil Resistance Electrical Characteristics Parameter Contact Resistance Unit 100 m (max) Operate Time 0.5 ms(max) Bounce Time 0.5 ms(max) Release Time 0.2 ms(max) Insulation Resistance (100VDC ) 1011 (min) Power 10 VA(max) Switching Voltage 200 VDC(max) Switching Current 0.5 A(max) Carry Current 1.0 A(max) Breakdown Voltage ( Across Open Contact ) 250 VDC(min) 500 VDC(min) ( Between Coil & Contact ) Life Expectancy (Signal Level) 108 Operating Temp -40 to 85 Storage Temp -50 to125 Resonant Frequency 3.5 Vibration ( 10-2000HZ ) 20 KHZ g(max) 100 mVDC 10A Minimum Permissible Load 22 Rating c 2004 cosmo ELECTRONICS CORPORATION http://www.cosmo-ic.com