AS81714 Series II Qualified Products Oer
Robust and Highly Reliable Wire Termination in
Demanding Environments
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
DEUTSCH
CTJ Series Common
Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 2
DEUTSCH CTJ Series
Common Termination Systems — AS81714 Series II
Contents
INTRODUCTION 3
MODULES
CTD and CTJ1 Power Distribution and Feedback Modules 6
CTJ4 Series Electronic Component Modules 9
CTJ5 Series Board-Mount/Pluggable Modules 19
CTJ6 and CTJ9 Series Plug and Receptacle Connectors 22
CTJ7 and CTG Series Grounding Modules and Junctions 26
CTL, CTM, and CTN Series In-Line Junctions 29
Composite In-line Junctions 32
Adapter Junctions 35
RAILS
CTJ2 Series Metallic Single-Module Rails 37
CTJ3 Series Metallic Rails 38
DCR Series Composite Rails 40
CONTACTS AND TOOLING
Socket Contacts 42
CTJ Series Tooling 43
CROSS REFERENCE
DEUTSCH CTJ to AS8171 46
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 3
RUGGED
• Many parts qualified to SAE-AS81714
• Integrated bus bar technology
ENVIRONMENTALLY SEALED
• Resists fluids commonly found in
aerospace and defense applications
• Helps prevent foreign object
debris issues
EASY TO USE
• Insertable modules that can be
easily removed and reinserted into
rails with tools
APPLICATIONS
• Commercial Air
• Space
• Military Ground
• Military Aerospace
The DEUTSCH CTJ Series common termination system from
TE Connectivity (TE) is a system of wires and components
that are interconnected to one another by the use of a
standard AS39029 socket contact only. This eliminates
the need for pin contacts which are located in the mating
components. Bussed cavities use our single-pin bus bar
design. There are multiple design options available to
customize the modules, junctions, splices and rails available
in Mil Spec-approved AS81714 Series II and non-qualified
proprietary designs.
TE Advantage
DEUTSCH AS39029 Contacts. All assemblies—modules,
splices, etc.—are supplied with DEUTSCH AS39029 socket
contacts, which are designed to meet AS39029 standard
for ruggedness and vibration resistance.
Customization. Products can be customized to help meet
your specific needs.
Single Rail Assembly. We offer rail assemblies for single-
mount components.
Easy Assembly. We offer easy insertion and removal of
single rails inside multimodule assemblies.
TE Components . . . TE Technology . . . TE Know-how . . .
AMP | AGASTAT | CII | HARTMAN | KILOVAC | MICRODOT | NANONICS | POLAMCO | Raychem
SEACON | Rochester | DEUTSCH
Empower Engineers to Solve Problems, Moving the World Forward.
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 4
Environmentally Sealed Grommet
Housing
Wire-Applied AS39029 Socket Contact
Integral Pin Contact
Bussed Cavities Single Pin Buss Bar
CTD Bussing Modules for power distribution.
CTJ1 Feedback Modules with various
bussing arrangements.
CTJ4 Electronic Component Modules
design based upon Mil-T-81714/62 electronic
modules. Modules are available with a
variety of diodes, resistors, capacitors, and
fuses, with both M81714/62 equivalents and
additional configurations.
CTJ5 Board-Mount Modules include solder
pin contacts for direct mounting to pc boards
and flex cable. By eliminating the need for
a mounting rail, CTJ5 modules provide a
flexible and compact solution.
CTJ6 Plug and CTJ9 Receptacle Connectors
provide a small, lightweight method of
connecting/disconnecting multiple wires.
Available in flange-mount and in-line versions.
CTJ7 Grounding Modules, using either
flange mount or stud mount, provide sealed
multiwire grounding solutions.
CTJ2 Metallic Mounting Bracket are
aluminum alloy and designed to hold one
single module or two half-size modules.
CTJ3 Metallic Rails use aluminum alloy and
stainless steel clips. They are available with
a variety of finishes and sizes ranging from
2 to 40 inches.
DCR Composite Rails are a lightweight
alternative to CTJ3 rails, offering up to 48%
weight savings and available in lengths
from 2 to 20 inches.
Junctions and Splices
CTL, CTM and CTN In-Line Junctions
connect two to four wires in-line and
multijunctions for housing and sealing
individual components. The CTL is an in-line
junction for single wires. The CTM connects
and buses two, three, or four wires. The CTN
series connects contacts electrically with
diodes, capacitors, fuses, or resistors.
Composite In-Line Junctions are
composite versions of the CTL, CTM, and
CTN series with electronic components
design-in customization.
CTJ Grounding Junctions provide a simple
method of terminating wire to ground using
standard AS39029 contacts.
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 5
CTJ Mil Spec Series General Specifications
The CTJ Mil Spec Series meet requirements
of SAE-AS81714.
Dielectric Withstanding Voltage (AS81714
paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph
3.5.11): 5000 MΩ min. at 25°C
Operating Temperature: -65°C to +200°C
Physical Shock: 78 g in each of the 3
mutually perpendicular planes
Vibration: Maintains continuity to minimize
mechanical or physical damage during or
after vibration following vibration levels
Level 1—34 minutes per axis
20–90 Hz at 6 dB/oct. rise
90–300 Hz at 1.0 g2/Hz
300–2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20–40 Hz at 6 dB/oct. rise
40–350 Hz at 0.5 g2/Hz
350–2000 Hz at 6 dB/oct. fall
No discontinuities greater than
1 microsecond
Corrosion: 48 hours of salt spray
Magnetic Permeability: 2.0 max.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Sealing Grommet: Elastomer, fluid resistant
and environmentally sealed
Metal Rails (CTJ2 and CTJ3): Aluminum
alloy, nickel plated (standard). Also available
with anodized, olive drab cadmium, or clear
finishes. Stainless steel clips
DCR Rails: Composite
Contact Resistance (at 25°C)
Meets AS39029 paragraph 3.5.4
Wire Size Test Current Voltage Drop
22 AWG 5 A 73 mV
20 AWG 7.5 A 55 mV
16 AWG 13 A 50 mV
12 AWG 23 A 42 mV
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range
(AWG) Current Rating
Size 22 26–22 5 A
Size 20 24–20 7.5 A
Size 16 16–20 13 A
Size 12 14–12 23 A
Grommet Sealing Range
Contact Size Wire OD
Min. Max.
22 0.030 0.060
20 0.040 0.083
16 0.065 0.109
12 0.097 0.142
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 6
CTD power distribution and CTJ feedback modules for
rugged, environmentally sealed bussing of wires.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11): 5000 MΩ
min. at 25°C
Operating Temperature: -65°C to +200°C
Vibration: Maintains continuity to minimize mechanical or
physical damage during or after vibration levels stated in
tested specifications
Corrosion: 48 hours of salt spray
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
EASY TO USE
• Busses 6 to 20 contacts in
a small area
• Internal bus bars are configured
to allow connections of various
combinations of wires
RUGGED
• Uses a rugged A39029 socket
contact mated to one-piece
(cold-headed) internal pin bus bars
• Excellent vibration resistance
• Environmentally sealed
CONVENIENT
• Modules fit in single, multiple,
composite or metal rails with
multiple mounting options
• CTD distribution modules
accommodate dierent sizes of
contacts within the same bus
DEUTSCH CTD and CTJ1
Power Distribution and Feedback Modules
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 7
Contact Resistance (at 25°C)
Meets AS39029 paragraph 3.5.4
Wire
Size
Test
Current
Voltage
Drop
22 AWG 5 A 73 mV
20 AWG 7.5 A 55 mV
16 AWG 13 A 50 mV
12 AWG 23 A 42 mV
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range
(AWG)
Current
Rating
Size 22 26–22 5 A
Size 20 24–20 7.5 A
Size 16 16–20 13 A
Size 12 14–12 23 A
Grommet Sealing Range
Contact
Size
Wire OD
Min. Max.
22 0.030 0.060
20 0.040 0.083
16 0.065 0.109
Distribution Bussing Arrangements
Part No. CTD126E01A CTD160E01F CTD126E02E CTD1062E05A
No. of Busses 1 1 2 5
Contacts per Bus
2 Size 12
6 Size 16
—
2 Size 16
6 Size 20
—
1 Size 12
3 Size 16
—
1 Size 12
1 Size 20
1 Size 22
Distribution Bus 26 60 26 062
Bussing Arrangement 01A 01F 02E 05A
CTD Series
CTD Outline Dimensions
Part Numbering System
CTD 1 60 E 01F - 513
Basic Identifier
Module Type
1 Feedback
Distribution Bus
(See Table)
Environmental
Bussing Arrangements
(See Table)
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
.510 .672
.920
1.020 .672
1.047
Size 16 Module
(CTD160E01F)
Size 12 Module
(CTD126E01A, CTD126E02E, CTD1062E05A)
CTD16 Module CTD12 and CTD10 Module
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 8
Feedback Bussing Arrangements
Size 22 Contacts
Quantity: 20
No. of Busses 1 2 5 6 10 4
Bus Code 01C 02D 05E 06B 10A 04F
Size 20 Contacts
Quantity: 12
No. of Busses 1 2 3 4 6
Bus Code 01B 02C 03D 04A 06E
Size 16 Contacts
Quantity: 6
No. of Busses 1 2 3
Bus Code 01D 02B 03A
Size 12 Contacts
Quantity: 6
No. of Busses 1 2 3
Bus Code 01E 02A 03B
CTJ1 Series
CTJ1 Outline Dimensions
.510 .672
.760
1.020 .672
1.047
Size 22, 20, and 16 Modules Size 12 Module
Size 22, 20, and 16 Modules Size 12 Module
Part Numbering System
CTJ 1 22 E 05E - 513
Basic Identifier
Module Type
1 Feedback
Contact Size
22, 20, 16, 12
Environmental
Bussing Arrangements
(See Table)
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
Ordering Information
Module Part No.
Size 22 CTJ122Exxx-yyy
Size 20 CTJ120Exxx-yyy
Size 16 CTJ116Exxx-yyy
Size 12 CTJ112Exxx-yyy
xxx = bussing arrangements
yyy = modification codes
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 9
CONVENIENT
• May be placed near transient
suppression devices that they are
designed to protect
• Each module houses small printed
circuit boards incorporating a variety
of discrete electronic components
• Uses crimp-tool terminations and
a housing system for discrete
components and circuits
• Lightweight composite technology
for weight-saving solutions
ROBUST
• Fluid resistant in most military
or aerospace environments
• Input/output wiring is sealed with
elastomer grommet to help protect
against environmental hazards
• Designed to the electronic
requirements of MIL-T-81714/62
VERSATILE
• Available with a variety of discrete
electronic components with both
M81714/62 equivalents and additional
configurations
CTJ4 electronic component modules are designed to
the requirements of MIL-T-81714/62. Modules are available
with a variety of diodes, resistors, capacitors and fuses, with
both M81714/62 equivalents and additional configurations.
Specifications
Operating Temperature: -65°C to +200°C or IAW Electronic
Component (whichever has the lesser requirement)
Thermal Shock and Vibration: In accordance withAS81714 or
in accordance with electronic component (whichever has the
lesser requirement)
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
DEUTSCH CTJ4 Series
Electronic Component Modules
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 10
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range (AWG) Current Rating
Size 20 24–20 7.5 A
Size 12 14–12 23 A
Ordering Information
Contact Part No.
Size 20 CTJ420E-xxx-yyy
Size 12 CTJ412E-xxx-yyy
xxx = individual electronic circuits
yyy = modification code
Outline Dimensions
.920
MAX
.510 .672
1.020
1.170
MAX
.672
CTJ4 Modules
Part Numbering System
CTJ4 20 E 017 - 513
Basic Identifier
Contact Size
20, 12
Environmental
Individual Circuits
Modifiers
513 Elastomer change to meet AS81714 Fluid Requirements
090 Less Contacts
6148 Elastomer change to meet AS81714 Fluid requirements, less sontacts, less sealing Plugs and
less Insertion/Removal Tools
4010 Vacuum Bake
.920
MAX
.510 .672
1.020
1.170
MAX
.672
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 11
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ412E001
One 15 A, 125 V Fuse
CTJ420E002
Five 150 Ω Resistors, 1/4 W
CTJ420E003
Two 150 Ω Resistors, 1/4 W
One 10 F Capacitor, 35 WVDC
CTJ420E004
One VE08 Rectifier
CTJ420E005
Five JANTX 1N4246 or
JANTX 1N5616 Diodes
CTJ420E006
Three JANTX 1N6054A
Zener Diodes
CTJ420E008
Four JANTX 1N3613 Diodes
CTJ420E009
Six JANTX 1N5618 Diodes
CTJ420E010
Four JANTX 1N5618 Diodes
Four JANTX 1N4478 Zener Diodes
CTJ420E011
Five JANTX 1N5618 Diodes
CTJ420E012
Five 10 kΩ Resistors, 1/10 W
CTJ420E013
Four JANTX 1N5618 Diodes
One 200 Ω Resistor, 1/8 W
CTJ420E014
Two RNC55H1002BP Diodes
Two 10 kΩ Resistors, 1/10 W
CTJ420E015
Two JANTX 1N5618 Diodes
One 10 kΩ Resistor, 1/10 W
One 110 Ω Resistor, 1/10 W
CTJ420E016
Five JANTX 1N5618 Diodes
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 12
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ420E026
Five JANTX 1N5620 Diodes
CTJ420E027
Two 66099-108 or
66139-101 ISO Cubes
CTJ420E028
Eight JANTX 1N5550 Diodes
CTJ420E034
Five 150 Ω Resistors, 1/10 W
CTJ420E029
Two 10 kΩ Resistors, 1/10 W
Two 1.43 kΩ Resistors, 1/10 W
One JANTX1N4954 Zener Diode
CTJ420E020
Two 3.6 kΩ Resistors, 1/10 W
One 100 kΩ Resistor, 1/10 W
Two 1 F Capacitors, 50 WVDC
CTJ420E021
Three JANTX 1N5550 Diodes
CTJ420E022
Six JANTX 1N5809 Diodes
CTJ420E017
One JANTX 1N5618 Diode
One JANTX 1N4478 Zener Diode
CTJ420E019
One 1.10 kΩ Resistor, 1/10 W
One 1.40 kΩ Resistor, 1/10 W
One 20 kΩ Resistor, 1/10 W
Two 10 kΩ Resistors, 1/10 W
CTJ420E035
Five 10.2 kΩ Resistors, 1/10 W
CTJ420E036
Five 2.8 kΩ Resistors, 1/10 W
CTJ420E037
Five 23.2 kΩ Resistors, 1/20 W
CTJ420E038
Five 24.9 kΩ Resistors, 1/20 W
CTJ420E039
Five 41.2 kΩ Resistors, 1/20 W
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 13
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ420E044
Five JANTX 1N5552 Diodes
CTJ420E045
Two 40 kΩ Resistors, 1/10 W
Two 50 kΩ Resistors, 1/10 W
CTJ420E047
Three 60.4 or 59 Ω Resistors, 2 W
CTJ420E051
Three JANTX 1N5618 Diodes
CTJ420E052
Three JANTX 1N5618 Diodes
CTJ420E041
Five JANTX 1N5550 Diodes
CTJ420E042
Five JANTX 1N5418 Diodes
CTJ420E043
Five JANTX 1N827 Zener Diodes
CTJ420E040
Five 49.9 kΩ Resistors, 1/20 W
CTJ420E059
Four 150 Ω Resistors, 1/4 W
CTJ420E101
Six JANTX 1N3613 Diodes
CTJ420E102
Two 20 kΩ Resistors, 1/4 W
Two 8.45 kΩ Resistors, 1/4 W
CTJ420E109
One MIL-T-27/172-45
Transformer
CTJ420E060
One JANTX 1N5618 Diode
CTJ420E100
Six JANTX 1N5618 Diodes
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 14
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ420E112
Five 150 Ω Resistors, 1/4 W
CTJ420E113
Six 4.7 kΩ Resistors, 1/4 W
CTJ420E114
Five JANTX 1N4247 Diodes
CTJ420E132
Five 150 Ω Resistors, 1/2 W
CTJ420E115
Five 6.2 kΩ Resistors, 1/4 W
CTJ420E116
Five 3 kΩ Resistors, 1/4 W
CTJ420E117
Five 5 A Fuses, 125 V
CTJ420E134
Three 150 Ω Resistors, 1/2 W
One 51 Ω Resistor, 1/2 W
One 820 Ω Resistor, 2 W
CTJ420E135
Four JANTX 1N5551 Diodes
CTJ420E137
Six JANTX 1N6419-1 Diodes
CTJ420E138
Five JANTX 1N5618 Diodes
CTJ420E140
Five 5.1 kΩ Resistors, 1/10 W
CTJ420E145
Two 100 kΩ Resistors, 1/4 W
Two 7.5 kΩ Resistors, 1/4 W
CTJ420E128
Two JANTX 1N6052A
Zener Dioides
CTJ420E129
One JANTX 1N5618 Diode
Three 10 kΩ Resistors, 1/8 W
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 15
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ420E146
Five JANTX 1N5618 Diodes
CTJ420E149
Three JANTX 1N5616 Diodes
Two JANTX 1N4461 Zener Diodes
CTJ420E155
Two 1 kΩ Resistors, 1/4 W
CTJ420E157
Two 120 Ω Resistors, 1/4 W
CTJ420E161
Two JANTX 1N6059A
Zener Diodes
CTJ420E162
Two JANTX 1N6067A
Zener Diodes
CTJ420E163
Two JANTX 1N6045A
Zener Diodes
CTJ420E164
One JANTX 2N2323A SCR
One 1.1 kΩ Resistor, 1/10 W
CTJ420E166
Two ON Semiconductor
MR756 Diodes
CTJ420E167
Five 1N5351B Zener Diodes
CTJ420E170
Five 249 Ω Resistors, 1/4 W
CTJ420E172
Two TELEDYNE M93F-1 ISO Cubes
CTJ420E173
Five JANTX 1N5418 Diodes
CTJ420E174
Five 100 kΩ Resistors, 1/10 W
CTJ420E176
Five 470 Ω Resistors, 1/2 W
3 5
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 16
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ420E311
Six JANTX 1N649-1 Diodes
CTJ420E187
Five 7 A Fuses, 125 V
CTJ420E189
Two JANTX 1N5618 Diodes
CTJ420E191
One INTERSIL HA-5002/883
Current Buer
CTJ420E192
Five 1 kΩ Resistors, 1/4 W
CTJ420E196
Five 127 Ω Resistors, 1/8 W
CTJ420E197
Five 5 A Fuses, 125 V
CTJ420E301
Four 2.7 kΩ Resistors, 1/4 W
One 56 Ω Resistor, 1/2 W
CTJ420E302
Four 2.7 kΩ Resistors, 1/4 W
One 3.9 kΩ Resistor, 1/4 W
CTJ420E303
One 2.7 kΩ Resistor, 1/4 W
One 1.8 kΩ Resistor, 1/4 W
One 5.1 kΩ Resistor, 1/4 W
One 3.3 kΩ Resistor, 1/4 W
Three JANTX 1N5711 Diodes
CTJ420E304
Two 120 Ω Resistors, 1/2 W
Two 2.7 kΩ Resistors, 1/4 W
CTJ420E305
Two 2.7 kΩ Resistors, 1/4 W
Two 3.9 kΩ Resistors, 1/4 W
CTJ420E177
Six JANTX 1N4454-1 Diodes
CTJ420E184
One 1 F Capacitor, 50 VDC
CTJ420E186
Two TELEDYNE M92F-3 ISO
Cubes
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 17
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ420E313
Five 100 kΩ Resistors, 1/4 W
CTJ420E314
Six 1N4007 Diodes CTJ420E316
Two 1 kΩ Resistors, 1/2 W
Two 1N4007 Diodes
CTJ420E317
Five 1N4007 Diodes
CTJ420E320
Three JANTX 1N5550 Diodes
CTJ420E330
One 1000 pF Capacitor, 100 VDC
CTJ420E332
Five 10 kΩ Resistor, 1/10 W
CTJ420E333
Two 2 kΩ Resistors, 1/4 W
Two JANTX 1N6677-1 Diodes
CTJ420E334
Two 10 kΩ Resistors, 1/8 W
Two 3 kΩ Resistors, 1/8 W
CTJ420E336
Two 200 A Diodes
CTJ420E337
One 1 kΩ Resistor, 1/8 W
Three 10 kΩ Resistors, 1/8 W
One 300 kΩ Resistor, 1/8 W
CTJ420E321
Four JANS 1N5811 Diodes
CTJ420E322
Five 4.7 kΩ Resistors, 1/2 W
CTJ420E326
One 100 Ω Resistor, 1/4 W
One 300 Ω Resistor, 1/4 W
One 573 Ω Resistor, 1/4 W
One 10 F Capacitor, 35 WVDC
CTJ420E338
Four JANTX 1N3613 Diodes
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 18
CTJ4 Circuit Configurations
DEUTSCH CTJ Series
Common Termination System
CTJ420E341
Two 470 kΩ Resistors, 2 W
CTJ420E342
Four 1.5 kΩ Resistors, 1 W
CTJ420E347
Twelve 4.99 kΩ Resistors, 1/8 W
CTJ420E339
One 100 Ω Resistor, 1/2 W
Four JANTX 1N3613 Diodes
CTJ420E340
Two 2.2 kΩ Resistors, 1/2 W
Two 240 kΩ Resistors, 1/2 W
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 19
Fast, cost-effective termination of pc boards, flat flex cable,
and electromechanical components.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11):
5000 MΩ min. at 25°C
Operating Temperature: -65°C to +200°C
Physical Shock: 78 g in each of the 3 mutually
perpendicular planes
Vibration: Maintains continuity to minimize mechanical
or physical damage during or after vibration following
vibration levels
Level 1—34 minutes per axis
20–90 Hz at 6 dB/oct. rise
90–300 Hz at 1.0 g2/Hz
300–2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20–40 Hz at 6 dB/oct. rise
40–350 Hz at 0.5 g2/Hz
350–2000 Hz at 6 dB/oct. fall
No discontinuities greater than 1 microsecond
Corrosion: 48 hours of salt spray
Magnetic Permeability: 2.0 max.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
CONVENIENT
• Mounts on pc board or flat flex cable
• Uses AS39029 socket contacts to
accept wiring and connect through
to straight solder pin contacts
• Uses a standard insertion/
removal tool
• Light weight
RUGGED
• Fluid resistant in most
aerospace environments
• Available to operate in hydraulic
fluid immersion
EASY TO USE
• Straight solder pin contacts allow
modules to be soldered to pc boards
or plugged into specialized components
• All contacts are discrete, mainly
used to take single leads from a
PC board out to wire
DEUTSCH CTJ5 Series
Board-Mount/Pluggable Modules
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 20
29|Page
OUTLINEDIMENSIONS
PARTNUMBERINGSYSTEM
CTJ520E12513
BasicIdentifier
ContactSize
22,20,16
Environmental
NumberofContacts
Modification
513ToMilStandardtoWithstandFluidImmersiontoMS55
4010VacuumBake
ORDERINGINFORMATION
Module
PartNo.
Size22
CTJ522E20xxx
Size20
CTJ520E12xxx
Size16
CTJ516E6xxx
xxx=modificationcode.
SOCKETCONTACTS
Grommet Sealing Range
Contact
Size
Wire OD
Min. Max.
22 0.030 0.060
20 0.040 0.083
16 0.065 0.109
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range
(AWG)
Current
Rating
Size 22 26–22 5 A
Size 20 24–20 7.5 A
Size 16 16–20 13 A
Contact Resistance (at 25°C)
Meets AS39029 paragraph 3.5.4
Wire
Size
Test
Current
Voltage
Drop
22 AWG 5 A 110 mV
20 AWG 7.5 A 83 mV
16 AWG 13 A 74 mV
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and environmentally sealed
Modules
Pin Arrangements
Size 22
20 Size 22 Contacts
Size 20
12 Size 20 Contacts
Size 16
6 Size 16 Contacts
Size 22
20 Size 22 Contacts
Size 20
12 Size 20 Contacts
Size 16
6 Size 16 Contacts
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 21
Ordering Information
Module Part No.
Size 22 CTJ522E20-xxx
Size 20 CTJ520E12-xxx
Size 16 CTJ516E6-xxx
xxx = modification code.
Part Numbering System
CTJ5 20 E 12 - 513
Basic Identifier
Contact Size
22, 20, 16
Environmental
Number of Contacts
Modification
513 To Mil Standard to Withstand Fluid Immersion to MS55
4010 Vacuum Bake
.510 .672
.187
.030
.760 (Size 22)
.920 (Sizes 20, 16)
Locating Key
Outline Dimensions
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 22
DEUTSCH CTJ6 and CTJ9 Series
Plug and Receptacle Connectors
Small, lightweight modules designed for flange mounting or in-
line mounting for simultaneous connect/disconnect of many wires.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 100,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11): 5000 MΩ
min. at 25°C
Operating Temperature: -65°C to +200°C
Thermal Shock (AS81714 paragraph 3.5.5): After cycling
the modules between -55°C and +200°C, they will meet all
applicable electrical and mechanical requirements
Vibration: Maintains continuity to minimize mechanical
or physical damage during or after vibration following
vibration levels
Level 1—34 minutes per axis
20-90 Hz at 6 dB/oct. rise
90-300 Hz at 1.0 g2/Hz
300-2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20–40 Hz at 6 dB/oct. rise
40–350 Hz at 0.5 g2/Hz
350–2000 Hz at 6 dB/oct. fall
No discontinuities greater than 1 microsecond
Corrosion: No decrease in performance or exposure of base
metal up to 48 hours of salt spray
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
SAVE SPACE AND WEIGHT
• Small, lightweight modules
• Flange mounting or in-line mounting
for simultaneous connect/disconnect
of many wires
VERSATILE
• Flange or in-line mountable
• Backpack configurations available
for receptacle connectors
• Available with optional strain relief
• PCB tail contacts or with crimp
backpack
RELIABLE
• Cork in bottle interfacial seal
between the mating halves
• Environmentally resistant
EASY MATING/UNMATING
• Audible click indicates proper mating
• Simple tool allows unmating
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 23
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
Strain Relief: Brass, nickel plated
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range
(AWG) Current Rating
Size 20 24–20 7.5 A
Size 12 14–12 23 A
Layout Arrangements
(Viewed from grommet side of plug module)
CTJ9 Receptacle Configurations
(Shown with rear environmental assembly)
Layout 02
2 Size 12 Contacts
Layout 06
6 Size 20 Contacts
Layout 12
12 Size 20 Contacts
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 24
Layout A B C D E F G H J K L
02 0.770 0.620 0.750 0.200 0.100 0.670 0.510 1.000 1.300 0.750 0.530
06 0.650 0.470 0.750 0.200 0.100 0.550 0.380 1.000 1.180 0.600 0.380
12 0.770 0.620 0.750 0.200 0.100 0.670 0.510 1.000 1.300 0.750 0.530
Part Numbering System
CTJ 6 20 E 02 N - 513
Basic Identifier
Module Type
6 Plug
9 Receptacle
Contact Size
20, 12
Connector Type
E Standard
R Rear Package (Receptacle Only)
Number of Contacts
02 2 Size 12
06 6 Size 20
12 12 Size 20
Keying
N Standard
1, 2, 3 Alternate Keying (Consult Factory for Manufacturability)
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
4010 Vacuum Bake
1038 Supply with Strain Relief, Shipped Loose with Plug
5145 Offering for Plug Side Only That Provides a Strain Relief, Beryllium Copper Contacts and a
Single Color Band for Improved Probe Damage Resistance
CTJ9 Receptacle Outline and Mounting Demensions
Flange Mount Receptacle In-Line Receptacle
Order Part No. 65002*** for standard extended pins
Order Part No. 65003*** for rear environmental assembly
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 25
CTJ6 Plug Outline Dimensions
Clocking Options
Strain Relief
CTJ6/CTJ9 Mating Procedure CTJ6/CTJ9 Unmating Procedure
Layout
A
B
PartNo.
02
0.652
0.510
CTJ612E02
06
0.530
0.360
CTJ620E06
12
0.652
0.510
CTJ620E12
KeyingPosition
45°AngleLocation
N
1,2
1
3,4
2
1,3
3
2,4
UsedwithLayout
A
B
PartNo.
06
0.320
0.490
162901106117
12
0.470
0.630
162901112117
34|Page
Layout
A
B
PartNo.
02
0.652
0.510
CTJ612E02
06
0.530
0.360
CTJ620E06
12
0.652
0.510
CTJ620E12
CLOCKINGOPTIONS
GrommetSideofPlug ReceptacleSide
KeyingPosition
45°AngleLocation
N
1,2
1
3,4
2
1,3
3
2,4
STRAINRELIEF
UsedwithLayout
A
B
PartNo.
06
0.320
0.490
162901106117
12
0.470
0.630
162901112117
CTJ6/CTJ9MATINGANDUNMATINGPROCEDURE
MatingProcedure
Layout A B Part No.
02 0.652 0.510 CTJ612E02
06 0.530 0.360 CTJ620E06
12 0.652 0.510 CTJ620E12
Keying Position 45° Angle Location
N1, 2
13, 4
21, 3
32, 4
Used with
Layout A B Part No.
06 0.320 0.490 1629-011-06117
12 0.470 0.630 1629-011-12117
Step 1. With the plug’s
engaging surface facing
the receptacle’s mating
face and the angled keying
surfaces aligned, insert the
plug into the receptacle.
Step 2. Press the plug and
receptacle firmly together
until you hear an audible
click that indicates the plug
is fully seated and locked
in position.
Step 1. Place extraction
tool CTJ-R06 over the plug
module and insert it into
the slots on both sides of
the receptacle. Push the
tool in until the module’s
locking fingers disengage.
Step 2. Pressing the legs of
the tool to hold the module
tight, pull back to remove
the plug module.
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 26
CTJ7 grounding modules for multiwire grounding applications
that need a small, rugged device that also offers sealing and
assembly ease.
CTG grounding junctions provide a simple method of
terminating a wire to ground. Wires with crimp type contacts
inserted into the grounding junctions can then be attached to
any grounding surface. Junctions are available for size 22, 20,
16, and 12 contacts.
Specifications
Dielectric Withstanding Voltage (AS81714 paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Insulation Resistance (AS81714 paragraph 3.5.11): 5000 MΩ
min. at 25°C
Operating Temperature: -65°C to +200°C
Physical Shock: 78 g in each of the 3 mutually
perpendicular planes
Thermal Shock (AS81714 paragraph 3.5.5): After cycling the
module between -55°C and +200°C, it will meet all applicable
electrical and mechanical requirements
Vibration: Maintains continuity to minimize mechanical
or physical damage during or after vibration following
vibration levels
Level 1—34 minutes per axis
20-90 Hz at 6 dB/oct. rise
90-300 Hz at 1.0 g2/Hz
300-2000 Hz at 6 dB/oct. fall
Level 2—14 minutes per axis
20-40 Hz at 6 dB/oct. rise
40-350 Hz at 0.5 g2/Hz
350-2000 Hz at 6 dB/oct. fall
No discontinuities greater than 1 microsecond
DEUTSCH CTJ7 and CTG Series
Grounding Modules and Junctions
CONVENIENT
• Small rugged devices
• Environmentally sealed
• Simple assembly
FLEXIBLE
• Stud and flange mounting
• Threaded stud can replace the
screw terminals
RUGGED ONE-PIECE
CONSTRUCTION
• Resistant to shock and vibration
• Light weight
• Dissipates heat well
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 27
Corrosion: 48 hours of salt spray
Magnetic Permeability: 2.0 max.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant
and environmentally sealed
Contact Resistance (at 25°C)
Meets AS39029 paragraph 3.5.4
Wire
Size
Test
Current
Voltage
Drop
22 AWG 5 A 73 mV
20 AWG 7.5 A 55 mV
16 AWG 13 A 50 mV
12 AWG 23 A 42 mV
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range
(AWG)
Current
Rating
Size 22 26–22 5 A
Size 20 24–20 7.5 A
Size 16 16–20 13 A
Size 12 14–12 23 A
Grommet Sealing Range
Contact
Size
Wire OD
Min. Max.
22 0.030 0.060
20 0.040 0.083
16 0.065 0.109
12 0.097 0.142
CTJ7 Modules
CTJ7 Module Outline Dimensions
39|Page
Size22
01CBussingCode
20Size22Contacts
Size20
01BBussingCode
12Size20Contacts
Size16
01DBussingCode
6Size16Contacts
Size12
01EBussingCode
6Size12Contacts
CTJ7MODULEOUTLINEDIMENSIONS
TypeK:FlangeMount
TypeE:StudMount
PARTNUMBERINGSYSTEM
CTJ722K01C513
BasicIdentifier
ModuleSize
22Size22Contact
20Size20Contacts
39|Page
Size22
01CBussingCode
20Size22Contacts
Size20
01BBussingCode
12Size20Contacts
Size16
01DBussingCode
6Size16Contacts
Size12
01EBussingCode
6Size12Contacts
CTJ7MODULEOUTLINEDIMENSIONS
TypeK:FlangeMount
TypeE:StudMount
PARTNUMBERINGSYSTEM
CTJ722K01C513
BasicIdentifier
ModuleSize
22Size22Contact
20Size20Contacts
39|Page
Size22
01CBussingCode
20Size22Contacts
Size20
01BBussingCode
12Size20Contacts
Size16
01DBussingCode
6Size16Contacts
Size12
01EBussingCode
6Size12Contacts
CTJ7MODULEOUTLINEDIMENSIONS
TypeK:FlangeMount
TypeE:StudMount
PARTNUMBERINGSYSTEM
CTJ722K01C513
BasicIdentifier
ModuleSize
22Size22Contact
20Size20Contacts
39|Page
Size22
01CBussingCode
20Size22Contacts
Size20
01BBussingCode
12Size20Contacts
Size16
01DBussingCode
6Size16Contacts
Size12
01EBussingCode
6Size12Contacts
CTJ7MODULEOUTLINEDIMENSIONS
TypeK:FlangeMount
TypeE:StudMount
PARTNUMBERINGSYSTEM
CTJ722K01C513
BasicIdentifier
ModuleSize
22Size22Contact
20Size20Contacts
Size 22
01C Bussing Code
20 Size 22 Contacts
Size 20
01B Bussing Code
12 Size 20 Contacts
Size 16
01D Bussing Code
6 Size 16 Contacts
Size 12
01E Bussing Code
6 Size 12 Contacts
Type K: Flange Mount
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 28
CTG Junction Outline Dimensions
Type E: Stud Mount
Part Numbering System
CTJ7 22 K 01C - 513
Basic Identifier
Module Size
22 Size 22 Contact
20 Size 20 Contacts
16 Size 16 Contacts
12 Size 12 Contacts
Flange Mounting Style
K Flange Mount
E Stud Mount (Not available for size 12)
Bus Arrangement
01C 20 Size 22 Contacts Bussed
01B 12 Size 20 Contacts Bussed
01D 6 Size 16 Contacts Bussed
01E 6 Size 12 Contacts Bussed
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6144 Replace Standard Hardware with MS21042l3 Self-Locking Nut and MS55 Resilient Material;
Replace Standard Contacts with High-Reliability Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
7067 Gold-Over-Nickel Plating, MVFS Insert Material, Add Washer, Rotate Insert Marking
4010 Vacuum Bake
Contacts
Size A B Part No.
22 1.316
(33.43)
0.188
(4.78) CTG-22-08
20 1.240
(31.50)
0.188
(4.78) CTG-20-08
16 1.246
(31.65)
0.250
(6.35) CTG-16-08
12 1.370
(34.80)
0.313
(7.95) CTG-12-08
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 29
CTL series in-line junctions connect two wires in-line using
crimp-type contacts. The junctions can then be placed in a
wire bundle without being mounted.
CTM series multi-junctions connect and bus four wires. They
can be used to replace “Y” splices and terminal strips.
CTN Series electronic multi-junctions are in-line devices that
houses and shields passive or active components, including
fuses, resistors, diodes, capacitors, or integrated circuits.
Dielectric Withstanding Voltage (AS81714):
At Sea Level: 1500 VACrms
At 110,000 Ft: 200 VACrms
Operating Temperature: -55°C to +200°C
Physical Shock (AS39029, paragraph 3.5.9): Items shall not be
damaged, there shall be no loosening of parts due to shock,
and no interruption of electrical continuity longer than one
microsecond during exposure to mechanical shock.
Fluid Resistance:
MIL-PRF-5606: Hydraulic fluid
MIL-DTL-83133: JP-8 aviation fuel
MIL-PRF-7808: Lubricating oil
MIL-PRF-23699: Lubricating oil
MIL-A-8243: Deicing/defrosting fluid
MIL-C-25769: Aircraft cleaning compound
MIL-PRF-87937: Aircraft cleaning compound
MIL-G-3056: Gasoline
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Gold over copper
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
VERSATILE
• Options to connect up to 4 wires
in-line and bussed configurations
• Houses and seals individual
components
• Replacement for “Y’ splices and
terminal strips
• Special configurations and
designs available
RUGGED
• Resistant to shock and vibration,
per Mil AS39029, paragraph 3.5.9
• Extreme temperature range: -55°C
to +200°C
• Resistant to harsh fluids, per Mil
AS-81714
EASY TO USE
• In-line mountable
• Uses AS39029 crimp contacts
DEUTSCH CTL, CTM, and CTN Series
In-Line Junctions
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 30
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range
(AWG) Current Rating
Size 22 26–22 5 A
Size 20 24–20 7.5 A
Size 16 16–20 13 A
Size 12 14–12 23 A
Grommet Sealing Range
Contact Size Wire OD
Min. Max.
22 0.030 0.060
20 0.040 0.083
16 0.065 0.109
CTL Outline Dimensions
CTM Outline Dimensions
Part No. Size A Max. B .030
C T L-2 2 22 1.280 0.200
C T L-2 0 20 1.452 0.260
C T L-1 6 16 1.400 0.300
C T L-1 2 12 1.680 0.360
Part Numbering System
CTL - 22 - 513
Basic Identifier
Contact Size
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
Part No. Size A .060 B .030 C .030
CTM 22 22 1.262 0.354 0.210
CTM 20 20 1.368 0.451 0.241
CTM 16 16 1.368 0.518 0.274
CTM 12 12 1.644 0.644 0.337
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 31
CTN Layout Arrangements
CTN Outline Dimensions
Part Numbering System
CTN 20 D XXX - 513
Basic Identifier
Contact Size
Electronic Base Component
D Diode
C Capacitor
I Integrated Circuit
R Resistor
F Fuse
Numerical Sequence
Consult TE for component availability
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
6148 MS55 Resilient Material, Omit Contacts, Sealing Plugs, and Insertion/Removal Tool
4010 Vacuum Bake
Part Numbering System
CTM - 22 - 513
Basic Identifier
Contact Size
Modifications
513 To Mil Standard to Withstand Fluid Immersion to MS55
090 Less Contacts
4010 Vacuum Bake
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 32
Designed to AS81714 requirements, DEUTSCH in-line
termination junctions are composite versions of the CTL, CTM,
and CTN series.
Dielectric Withstanding Voltage (AS81714 paragraph 3.5.6):
At Sea Level: 1500 VACrms
At 100,000 Ft: 200 VACrms
Operating Temperature: -65°C to +200°C
Insulation Resistance (AS81714 paragraph 3.5.11): 5000 MΩ
min. at 25°C
Electrical Continuity:
Shock Exposure: <1 s @ 300 g sine/2 3 ms
Vibration: <1 s @ 30 g peak
Materials
Housing: Composite
Bus Bar/Pins: Copper alloy, plated gold
Pin Contacts: Copper, plated gold
Sealing Grommet: Elastomer, fluid resistant and
environmentally sealed
RUGGED
• Rugged composite housing
• Fluid resistant: hydraulic fluid,
jet fuel, and other fluids common in
aerospace and defense applications
• Environmentally sealed
• No exposed discrete components
EASY TO USE
• Reliable and quick termination
• No mounting required
• Light weight
CONVENIENT
• Field serviceable AS39029
socket contacts
• Accommodates a wide range of
common gauge wire, from 22 to
12 AWG
• Hand crimp socket contacts
VERSATILE
• Design options for discrete
components available
DEUTSCH Composite In-line Junctions
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 33
Grommet Sealing Range
Contact Size Wire OD
Min. Max.
22 0.030 0.060
20 0.040 0.083
16 0.065 0.109
Usable Wire Size
Meets AS39029 paragraph 3.4.2
Contact Wire Range (AWG) Current Rating
Size 22 26–22 5 A
Size 20 24–20 7.5 A
Size 16 16–20 13 A
Size 12 14–12 23 A
Single In-line Junction
SINGLE IN-LINE JUNCTION
DUAL IN-LINE JUNCTION
2.635 MAX. .039 MAX
2.500 MAX.
.800 MAX.
.415 MAX.
Single In-Line Junction
65049-20R-XXX (R = resistor)
XXX Component Value Manufacturer PN
004 5.1 KΩ, 1/4 W, 2% RLR07C5101GS
009 510 Ω, 1/4 W, 5% RCR07G511JS
010 390 Ω, 1/4 W, 5% RCR07G391JS
011 150 KΩ, 1/4 W, 5% RLR07C1500JS
016 1540 Ω, 1/4 W, 1% RLR07C1541FS
017 100 KΩ, 1/8 W, 1% RNR55C1003F* (*= R or S)
018 10 KΩ, 1/4 W, 1% RLR07C1002FS
019 2.7 KΩ, 1/4 W, 2% RLR07C2701GS
022 430 KΩ, 1 W, 1% RWR81S4300FR
024 1 KΩ, 1/2 W, 1% PPC1.00KXCT-ND
025 1.25 KΩ, 1/4 W, 1% RNF55-125,-1%-5PPM-1
026 100 KΩ, 1/4 W, 1% RLR05C3161FS
65049-20D-XXX (D = diode)
XXX Component Value Manufacturer PN
016 600 Vrms @ 1 A JANTX 1N5619
018 700 Vrms @ 3 A JANTX 1N5554
65049-20F-XXX (F = fuse)
XXX Component Value Manufacturer PN
004 125 V @ 0.5 A FM08A (TINITRON FUSE)
Please ask your salesperson for customized specifications
(based on discrete passive requirement part number)
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 34
Dual In-line Junctions
SINGLE IN-LINE JUNCTION
DUAL IN-LINE JUNCTION
2.635 MAX. .039 MAX
2.500 MAX.
.800 MAX.
.415 MAX.
Basic Identifier ...............................................65053-xxx
All contacts provided are size 20 sockets
Mil Spec M39029/22-192.
Please ask your salesperson for customized specifications
(based on discrete passive requirement part number)
Dual In-Line Junction
65053-XXX
XXX Component Value Manufacturer PN
201 36 Vwm @ 23 A, Bi-dir Diode = 1N6388
202 420 Vrms @ 3 A Diode = 1N5406
203 420 Vrms @ 3 A Diode = dual 1N5406
204 14 Vz @ 6.7 Azs Diode = 1N5351B
205 125 V, 0.5 A Fuse = dual FM08A125V1/2A
208 700 Vrms @ 10 A peak Diode = dual 1N4007
214 600 Vrrm @ 1 A Diode = dual 1N5618
216 120 Ω, 1/2 W Resistor = RCR20G121JS
219 125 V, 2 A Fuse = FM08A125V1/2A
220 125 V, 7 A Fuse = PICO II SLO-BLO 473
224 125 V, 1 A Fuse = PICO II SLO-BLO 473
226 1Ω, 1 W Resistor = OHMITE WHB1ROFE
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 35
CONVENIENT
• Easily convert devices with screw
terminals to use DEUTSCH contacts
FLEXIBLE
• Two thread sizes
• Environmental and nonenvironmental
versions
RELIABLE
• Low-cost contact insertion/removal
tool protects converted device by
breaking before it can damage
junction or device
Adapter junctions provide a quick and easy way to convert
electrical components with screw terminals to the CTJ
system. The junction attaches to and becomes part of the
device to be converted. The adapter junctions are available in
two thread sizes (8/32 and 6/32) and in environmental and
nonenvironmental versions.
The adapter junctions meet all applicable requirements
of MIL-C-26482.
DEUTSCH Adapter Junctions
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 36
JTE Series Environmental Adapter Junctions
Contact
Size
Part No. Dimensions Weight
(Lb., Approx.)
8-32 Thread 6-32 Thread A .020 B .020 C .020 E (Ref)
22 JTE-22-01 JTE-22-02 0.838 0.187 0.096 0.216 0.0039
20 JTE-20-01 JTE-20-02 0.745 0.187 0.096 0.216 0.0039
16 JTE-16-01 JTE-16-02 0.773 0.250 0.096 0.289 0.0063
12 JTE-12-01 —0.842 0.312 0.096 0.360 0.0106
JTA Series Nonenvironmental Adapter Junctions
Contact
Size
Part No. Dimensions Weight
(Lb., Approx.)
8-32 Thread 6-32 Thread A .020 B .020 C .020 E (Ref)
22 JTA-22-01 JTA-22-02 0.553 0.187 0.096 0.216 0.0036
20 JTA-20-01 JTA-20-02 0.551 0.187 0.096 0.216 0.0036
16 JTA-1 6- 01 JTA-16-02 0.561 0.250 0.096 0.289 0.0059
12 JTA-12-01 —0.605 0.312 0.096 0.360 0.0099
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 37
CTJ2 metallic rails are aluminum alloy and designed to hold
one single module or two half-size modules.
DEUTSCH CTJ2 Series
Metallic Single-Module Rails
VERSATILE
• Designed to hold up to 50 variations
• Elongated mounting holes for easy
installation
• Available in sizes ranging from 2”
to 40”
LIGHT WEIGHT
• Extruded aluminum alloy rail
• Stainless steel metal clip
Part Numbering System
CTJ-2 D - 01 - 4021
Basic Identifier
Finish
A Black Anodized
B Olive Drab Cadmium
C Clear Cadmium
D Nickel (Standard)
Type
01 Single Full Module That Accepts Double Half Modules
Modifications
4021 Rails Standard, Except Module Locations Marked with
Sequential Numbers instead of Alphabetical Identification
Outline Dimensions
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 38
CTJ3 metallic rails from TE Connectivity (TE) use aluminum
alloy and stainless steel clips. They are available with a variety
of finishes and sizes ranging from 2 to 40 inches.
VERSATILE
• Designed to hold up to 50 variations
• Elongated mounting holes for easy
installation
• Available in sizes ranging from 2”
to 40”
LIGHT WEIGHT
• Extruded aluminum alloy rail
• Stainless steel metal clip
DEUTSCH CTJ3 Series
Metallic Rails
Frame Capacity
Longer rail sizes available; consult TE
Length*
(Inch)
Frame Capacity
A .015 B .010 Weight, Lb.
Sizes
22, 20, 16
Size
12
02 2 1 1.036 0.518 0.022
03 3 1* 1.554 1.036 0.033
04 4 2 2.072 1.554 0.043
05 52* 2.590 2.072 0.054
06 6 3 3.108 2.590 0.065
07 73* 3.626 3.108 0.075
08 8 4 4.144 3.626 0.086
09 94* 4.662 4.144 0.097
10 10 55.180 4.662 0.108
12 12 66.216 5.698 0.130
*Size includes room for one or more Size 22, 20, or 16 modules.
Part Numbering System
CTJ - 3D - 04 - 4021
Basic Identifier
Type/Finish
3 Feedback Frame
A Black Anodized
B Olive Drab Cadmium
C Clear Cadmium
D Nickel (Standard)
Length
02–012 Number of Modules
Modifiers
4021 Rails Standard, Except Module Locations Marked with
Sequential Numbers Instead of Alphabetical Identification
4032 Rails Standard, Except ID Is Numbered on Upper Leg
and Marked AB, AB, AB… on Lower Leg per MIL-T-81714
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 39
Outline Dimensions
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 40
DEUTSCH DCR composite rails provide a lightweight,
corrosion-resistant mounting system for electronic feedback
and distribution modules. It is designed to allow hand
insertion of each individual module. A positive lock retains
the modules in the rails. Modules can be individually
unlocked and removed by using a simple tool.
LIGHT WEIGHT
• 48% lighter than comparable
aluminum rails
• Composite version of CTJ3 rail
VERSATILE
• Intermounts with MIL-T-81714 Series
II rails
• Accepts MIL-T-8174M Series II
modules
• Simple removal tooling
HIGH PERFORMANCE
• Wide temperature range: -65°C
to +175°C
• Environmentally sealed,
fluid resistant
• Corrosion resistant
DEUTSCH DCR Series
Composite Rails
Frame Capacity and Outline Dimensions
No. of Modules A .015 B .010 Weight, Oz. (g)
02 1.036 0.518 0.19 (5.30)
03 1.554 1.036 0.28 (7.95)
04 2.072 1.554 0.37 (10.60)
05 2.590 2.072 0.47 (13.25)
06 3.108 2.590 0.56 (15.90)
07 3.626 3.108 0.65 (18.55)
08 4.144 3.625 0.75 (21.20)
09 4.662 4.144 0.84 (23.85)
10 5.180 4.662 0.93 (26.50)
11 5.698 5.180 1.03 (29.25)
12 6.216 5.698 1.12 (31.80)
13 6.734 6.216 1.21 (34.45)
14 7.252 6.734 1 . 31 (37.10)
15 7.770 7. 252 1.40 (36.75)
16 8.288 7.770 1. 50 (42.40)
17 8.806 8.288 1.59 (45.05)
18 9.324 8.806 1.68 (47.70)
19 9.842 9.324 1.68 (50.35)
20 10.350 9.842 1.87 (53.00)
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 41
Part Numbering System
DCR-1 A - 05
Basic Identifier
Finish
A Black Composite
Length (Capacity)
02–20
Outline Dimensions
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 42
Socket Contacts
B
A
C
D E
C
B
Inspection
Hole
Crimp Barrel
First
Color Band
Inspection
Hole
Crimp Barrel
First
Color Band
A
Crimp Barrel
Size 12 Only
DE
B
A
C
D E
C
B
Inspection
Hole
Crimp Barrel
First
Color Band
Inspection
Hole
Crimp Barrel
First
Color Band
A
Crimp Barrel
Size 12 Only
DE
Reduced Diameter Contact Information
B
A
C
D E
C
B
Inspection
Hole
Crimp Barrel
First
Color Band
Inspection
Hole
Crimp Barrel
First
Color Band
A
Crimp Barrel
Size 12 Only
DE
Part Numbers and Outline Dimensions
Contact Size Part No. A. Max. B. Dia. C. Max. D. Min. E. Max. Weight (Lb.)
20 1662-202-2031 0.358 0.044/0.042 0.0940 0.033 0.050 0.00027
16 1662-202-1631 0.358 0.064/0.066 0.1300 0.046 0.070 0.00050
12 1662-202-1231 0.460 0.100/0.097 0.17100 0.066 0.103 0.00145
Application Information
Contact Size Part No. Color Bands Wire Strip Length Wire Range (AWG)
20 1662-202-2031 Red-Green 0.207 0.030 26–22
16 1662-202-1631 Blue-Red 0.207 0.030 24–20
12 1662-202-1231 Yellow-Blue 0.225 0.020 20–16
Contact Tooling and Sealing Plug
Contact
Size
Crimp Tool Ins/Ext Tool Unwired
Removal Tool
Sealing Plug
Tooling Positioner Part No. Color
22 MH860 (M22520/7-01) 86-19 (M22520/7-11) M81969/14-01 81517-23 MS27488-22 Black
20 MH860 (M22520/7-01) 86-20 (M22520/7-12) M81969/14-10 M15574-20 MS27488-20 Red
16 MH860 (M22520/7-01) 86-21 (M22520/7-13) M81969/14-03 M15574-16 MS27488-16 Green
12 AF8 (M22520/1-01) M22520/1-16 M81969/16-03 M15574-16 MS27488-12 Orange
Part Numbers and Outline Dimensions
Contact Size Part No. Mil Equivalent A. Max. B. Dia. C. Max. D. Min. E. Max. Weight
22 CTS-S22/22 M39039/22-191 0.336 0.033/0.031 0.0615 0.033 0.048 0.00011
20 CTS-S20/20 M39039/22-192 0.358 0.044/0.042 0.0940 0.046 0.070 0.00027
16 CTS-S16/16 M39039/22-193 0.358 0.064/0.066 0.1300 0.066 0.103 0.00050
12 CTS-S12/12 M39039/22-605 0.455 0.100/0.097 0.17100 0.096 0.152 0.00145
Application Information
Contact Size Part No. Color Bands Wire Strip Length Wire Range (AWG)
22 CTS-S22/22 Brown-White-Brown 0.207 0.030 26–22
20 CTS-S20/20 Brown-White-Red 0.207 0.030 24–20
16 CTS-S16/16 Brown-White-Orange 0.207 0.030 20–16
12 CTS-S12/12 Blue-Black-Green 0.225 0.020 14–12
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 43
DEUTSCH CTJ Series Tooling
Contact
Size Part No. Color Unwired
Removal Tool
22 M81969/14-01 Green/White 81517-23
20 M81969/14-10 Red/Orange M15574-20
16 M81969/14-03 Blue/White M15574-16
22 M81969/16-03 Yellow/White M15574-16
Contact
Size
Contact Part No. Crimp Tool Part No.
TE MIL Tooling Positioner
22 CTS-S22/22 M39029/22-191 MH860 (M22520/7-01) 86-19 (M22520/7-11)
20 CTS-S20/20 M39029/22-192 MH860 (M22520/7-01) 86-20 (M22520/7-12)
16 CTS-S16/16 M39029/22-193 MH860 (M22520/7-01) 86-21 (M22520/7-13)
22 CTS-S12/12 M39029/22-605 AF8 (M22520/1-01) M22520/1-16
Contact Insertion/Removal Tool
Contact Crimping Tool
CTJ Module Removal Tools
The removal tools make it fast and simple to remove modules from
a rail or to unmate CTJ6 and CTJ9 plug and receptacle connectors.
Part Numbers
CTJ-R06
(Use with CTJ6 and CTJ9 Series)
CTJ-R12
(Use with Rail-Mounted Modules)
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 44
Strip the wire to the proper dimension using an
appropriate tool and method.
Insert the stripped conductor into the contact’s
crimp barrel.
Remove the wire and inspect the termination.
A proper termination has:
• 8 indent markings
• Wire observable through the contact side hold
• No loose or nicked wire strands
Insert the contact into the tool with the crimp barrel
facing up.
Cycle the crimping tool by squeezing the handles. The
handles will not release until the tool has fully cycled.
Terminating CTJ AS39029 Contacts
Contact
Size
Crimp Tool
Tooling Positioner
22 MH860 (M22520/7-01) 86-19 (M22520/7-11)
20 MH860 (M22520/7-01) 86-20 (M22520/7-12)
16 MH860 (M22520/7-01) 86-21 (M22520/7-13)
22 AF8 (M22520/1-01) M22520/1-16
Contact Size Strip Length
22, 20, 16 0.207 0.030 (5.26 0.76)
12 0.225 0.030 (5.72 0.76)
Make sure you have the proper tool and positioner for the contact being crimped.
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 45
Insert the wire into the tool’s slot.
Pull back gently on the wire until the contact’s retention
shoulder seats against the tip of the tool.
Wrap the tool’s slot around the wire.
Slide the tool into the cavity until it butts against the
contact shoulder.
Installing
Sealing Plugs
Sealing plugs are
installed with the
head towards the
mating end of
connector. Use
the contact insertion
tool if needed.
Insert the contact in the proper module cavity.
Push the contact completely in.
Then remove the tool.
Lightly pull the wire back to make sure the contact
is correctly seated.
Press the wire between your fingers and the tool. Pull the
wire and tool back together.
Note: When using minimum diameter wire, the tool may
have a tendency to stop against the rear of the contact
crimp barrel. If this should occur, careful manipulation
of the tool will permit it to ride over the crimp barrel
and into the proper position to unlock the contact.
Inserting and Removing Contacts
The colored end is used for insertion. The white or orange end is used for withdrawal.
Inserting Contacts
Removing Contacts
Contact Size Tool Part No. Color
22 M81969/14-01 Green/White
20 M81969/14-10 Red/Orange
16 M81969/14-03 Blue/White
12 M81969/16-03 Yellow/White
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 46
Cross Reference
DEUTSCH CTJ to AS81714
Modules
DEUTSCH Part No. Mil Spec
CTJ112E01E-513 M81714/60-12-01
CTJ112E02A-513 M81714/60-12-02
CTJ112E03B-513 M81714/60-12-03
CTJ116E01D-513 M81714/60-16-01
CTJ116E02B-513 M81714/60-16-02
CTJ116E03A-513 M81714/60-16-03
CTJ120E01B-513 M81714/60-20-01
CTJ120E02C-513 M81714/60-20-02
CTJ120E03D-513 M81714/60-20-03
CTJ120E04A-513 M81714/60-20-04
CTJ120E06E-513 M81714/60-20-06
CTJ122E01C-513 M81714/60-22-01
CTJ122E02D-513 M81714/60-22-02
CTJ122E04F-513 M81714/60-22-04
CTJ122E05E-513 M81714/60-22-05
CTJ122E06B -5 13 M81714/60-22-06
CTJ122E10A-513 M81714/60-22-10
CTD1062E05A-513 M81714/61-0W
CTD126E02E-513 M81714/61-0X
CTD160E01F-513 M81714/61-0Y
CTD126E01A-513 M81714/61-0Z
CTJ712K01E-7067 M81714/63-12F
CTJ716K01D-7067 M81714/63-16F
CTJ716E01D-7067 M81714/63-16S
CTJ720K01B-7067 M81714/63-20F
CTJ720E01B-7067 M81714/63-20S
CTJ722K01C-7067 M81714/63-22F
CTJ722E01C-7067 M81714/63-22S
Module Removal Tool
DEUTSCH Part No. Mil Spec
CTJ- R06 M81714/69-01
CTJ- R12 M81714/69-02
Junctions
DEUTSCH Part No. Mil Spec
C T L-1 2 -5 1 3 M81714/65-12-1
CTM-12-513 M81714/65-12-2
C T L-1 6 - 5 1 3 M81714/65-16-1
CTM-16-513 M81714/65-16-2
C T L-2 0 - 5 1 3 M81714/65-20-1
CTM-20-513 M81714/65-20-2
C T L-2 2 -5 1 3 M81714/65-22-1
CTM-22-513 M81714/65-22-2
Rails
DEUTSCH Part No. Mil Spec
CTJ-3A-02-4032 M81714/67-02
CTJ-3A-03-4032 M81714/67-03
CTJ-3A-04-4032 M81714/67-04
CTJ-3A-05-4032 M81714/67-05
CTJ-3A-06-4032 M81714/67-06
CTJ-3A-07-4032 M81714/67-07
CTJ-3A-08-4032 M81714/67-08
CTJ-3A-09-4032 M81714/67-09
CTJ-3A-10 -4032 M81714/67-10
CTJ-3A-12-4032 M81714/67-12
CTJ-3A-13-4032 M81714/67-13
CTJ-3A-14-4032 M81714/67-14
CTJ-3A-15-4032 M81714/67-15
CTJ-3A-16-4032 M81714/67-16
CTJ-3A-18-4032 M81714/67-18
CTJ-3A-19-4032 M81714/67-19
CTJ-3A-20-4032 M81714/67-20
CTJ-3A-21-4032 M81714/67-21
CTJ-3A-25-4032 M81714/67-25
CTJ-3A-30-4032 M81714/67-30
CTJ-3A-40-4032 M81714/67-40
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM PAGE 47
Notes
DEUTSCH CTJ Series
Common Termination System
AEROSPACE, DEFENSE & MARINE /// DEUTSCH CTJ SERIES COMMON TERMINATION SYSTEM
AMP, AGASTAT, CII, DEUTSCH, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO, Raychem, SEACON, TE,
TE Connectivity and the TE connectivity (logo) are trademarks of TE Connectivity. Other products, logos, and company
names mentioned herein may be trademarks of their respective owners.
While TE Connectivity (TE) has made every reasonable eort to ensure the accuracy of the information herein, nothing
herein constitutes any guarantee that such information is error-free, or any other representation, warranty or guarantee
that the information is accurate, correct, reliable or current. The TE entity issuing this publication reserves the right to
make any adjustments to the information contained herein at any time without notice. All implied warranties regarding
the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a
particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to
change without notice. Specifications are subject to change without notice.
Consult TE for the latest dimensions and design specifications.
© 2018 TE Connectivity. All Rights Reserved.
1-1773867-9  08/18  
te.com/deutsch-ctj
LET’S CONNECT
We make it easy to connect with our experts and are ready to
provide all the support you need. Just call your local support number
or visit te.com to chat with a Product Information Specialist.
Technical Support
te.com/support-center
North America +1 800 522 6752
North America (Toll) +1 717 986 7777
EMEA/South Africa +800 0440 5100
EMEA (Toll) +31 73 624 6999
India (Toll-Free) +800 440 5100
Asia Pacific +86 400 820 6015
Japan +81 044 844 8180
Australia +61 2 9554 2695
New Zealand +64 (0) 9 634 4580