757D
Vishay Sprague
Aluminum Capacitors
+ 105 °C, Miniature, Radial Lead
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42056
418 Revision: 31-Jul-08
FEATURES
•Low impedance
•Low ESR
•High ripple current capability
•High capacitance
•Long life and stability
DIMENSIONAL CONFIGURATIONS in inches [millimeters]
Fig.1 Component outline
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case size
Ø D x L in mm
0.315" x 0.472" [8.0 x 12.0]
to 0.709" x 1.575" [18.0 x 40.0]
Operating temperature - 55 °C to + 105 °C
Rated capacitance range, CR120 µF to 15 000 µF
Tolerance on CR± 20 %
Rated voltage range, UR6.3 WVDC to 35 WVDC
Termination 2 and 3 radial leads and axial
mount
Life validation test at 105 °C 5000 hours: Δ CAP ≤ 20 % from
initial measurement. Δ ESR
≤ 1.25 x initial specified limit.
Δ DCL ≤ initial specified limit.
Δ Z ≤1.75 x initial measurement.
Shelf life at 105 °C 1000 hours: Δ CAP ≤ 15 % from
initial measurement. Δ ESR
≤ 1.10 x initial specified limit.
Δ DCL ≤ initial specified limit.
DC leakage current at 25 °C I = 0.01 CV,
2 minutes charge time
I in µA, C in µF, V in Volts
RIPPLE CURRENT MULTIPLIERS
TEMPERATURE
Ambient temperature Multipliers
+ 105 °C 1.0
+ 85 °C 1.73
+ 65 °C 2.23
+ 45 °C 2.64
+ 25 °C 3.0
FREQUENCY (Hz)
WVDC 400 1K - 19K 20K - 200K
6.3 - 35 0.75 0.82 1.0
LOW TEMPERATURE PERFORMANCE
CAPACITANCE RATIO C - 55 °C/C + 25 °C
MINIMUM AT 120 Hz
MAXIMUM CAPACITANCE CHANGE
Voltage Multiplier
6.3 V - 35 V 0.75
MAXIMUM IMPEDANCE CHANGE
Voltage 120 kHz 20 kHz - 100 kHz
6.3 V - 35 V 4 40
-
+
W1
2
W
D
max.
max.
min.
L
min.
0.591 [15.0] 0.787 [20.0]
S ± 0.024
[± 6.0]
Sleeve
+
-
C
L
Terminal Code D
Document Number: 42056 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com
Revision: 31-Jul-08 419
757D
Aluminum Capacitors
+ 105 °C, Miniature, Radial Lead Vishay Sprague
DIMENSIONS in inches [millimeters]
CASE
CODE
NOMINAL STYLE 4 STYLE 3 LEAD SPACING LEAD DIAMETER TYPICAL
WEIGHT
(g)
D L D (max.) L (max.) D (max.) L (max.) S ± 0.024
[0.60]
T ± 0.020
[0.50] Nominal AWG
No.
BB 0.315 [8.0] 0.472 [12.0] 0.335 [8.5] 0.512 [13.0] 0.335 [8.5] 0.551 [14.0] 0.138 [3.5] N/A 0.025 [0.63] 22 1.0
CC 0.394 [10.0] 0.512 [13.0] 0.413 [10.5] 0.563 [14.3] 0.413 [10.5] 0.630 [16.0] 0.197 [5.0] N/A 0.025 [0.63] 22 1.7
CD 0.394 [10.0] 0.630 [16.0] 0.413 [10.5] 0.670 [17.0] 0.413 [10.5] 0.740 [18.8] 0.197 [5.0] N/A 0.025 [0.63] 22 2.0
CG 0.394 [10.0] 0.787 [20.0] 0.413 [10.5] 0.846 [21.5] 0.413 [10.5] 0.906 [23.0] 0.197 [5.0] N/A 0.025 [0.63] 22 2.5
DG 0.492 [12.5] 0.787 [20.0] 0.512 [13.0] 0.846 [21.5] 0.512 [13.0] 0.906 [23.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 3.8
DK 0.492 [12.5] 0.984 [25.0] 0.512 [13.0] 1.043 [26.5] 0.512 [13.0] 1.142 [29.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 4.5
DT 0.492 [12.5] 1.319 [33.5] 0.512 [13.0] 1.346 [34.2] 0.512 [13.0] 1.417 [36.0] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 5.8
DS 0.492 [12.5] 1.673 [42.5] 0.512 [13.0] 1.720 [43.7] 0.512 [13.0] 1.791 [45.5] 0.197 [5.0] 0.098 [2.5] 0.032 [0.81] 20 7.3
EK 0.630 [16.0] 0.984 [25.0] 0.650 [16.5] 1.031 [26.2] 0.650 [16.5] 1.098 [27.9] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 7.2
EN 0.630 [16.0] 1.260 [32.0] 0.650 [16.5] 1.319 [33.5] 0.650 [16.5] 1.417 [36.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 9.4
ER 0.630 [16.0] 1.417 [36.0] 0.650 [16.5] 1.476 [37.5] 0.650 [16.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 10.6
EU 0.630 [16.0] 1.575 [40.0] 0.650 [16.5] 1.642 [41.7] 0.650 [16.5] 1.669 [42.4] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 11.8
FR 0.709 [18.0] 1.417 [36.0] 0.728 [18.5] 1.476 [37.5] 0.728 [18.5] 1.575 [40.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 13.4
FV 0.709 [18.0] 1.575 [40.0] 0.728 [18.5] 1.654 [42.0] 0.728 [18.5] 1.693 [43.0] 0.295 [7.5] 0.150 [3.8] 0.032 [0.81] 20 14.9
D
max.
C
L
max.
min.
min.
0.984 [25.0]0.984 [25.0]
0.984 [25.0] 0.984 [25.0]
L
+
+
min.
-
S ± 0.024
[± 0.6]
Sleeve
W
W
W
+
-
12
3
Third lead may fall
within ± 20° of C
W
W
W
+
-
12
3
-
+
D
max.
max.
L
S ± 0.024
[± 6.0]
Sleeve
0.280 ± 0.063
0.197 ± 0.063
[5.0 ± 1.6]
[7.1 ± 1.6] [9.5 ± 1.6]
0.374 ± 0.063
L
C
L
T
Terminal Code J Terminal Code O
757D
Vishay Sprague Aluminum Capacitors
+ 105 °C, Miniature, Radial Lead
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42056
420 Revision: 31-Jul-08
TAPE AND REEL, SPECIFICATIONS TO EIA-468D in inches [millimeters]
P
K
HF
P
0
d
D
0
WW
0
1
L
H
0
Formed Leads
DIMENSIONS in inches [millimeters]
CASE SIZE F LEAD SPACING STD. QTY/REEL
0.236 x 0.453 [6.0 x 11.0] 0.197 [5.0] 800
0.315 x 0.472 [8.0 x 12.0] 0.197 [5.0] 700
P
D
HF
P
0
0
L
WW
0
1
d
Unformed (Straight) Leads
f
DIMENSIONS in inches [millimeters]
CASE SIZE F LEAD SPACING STD. QTY/REEL
0.236 x 0.453 [6.0 x 11.0] 0.098 (1) [2.5] 800
0.315 x 0.472 [8.0 x 12.0] 0.138 (1) [3.5] 700
0.394 x 0.512 [10.0 x 13.0] 0.197 [5.0] 500
0.394 x 0.630 [10.0 x 16.0] 0.197 [5.0] 500
0.394 x 0.787 [10.0 x 20.0] 0.197 [5.0] 500
Note
(1) Available as special order.
Document Number: 42056 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com
Revision: 31-Jul-08 421
757D
Aluminum Capacitors
+ 105 °C, Miniature, Radial Lead Vishay Sprague
ORDERING EXAMPLE
Electrolytic capacitor 757D series: 757D 108 M 010 CG 3 D
DIMENSIONS in inches [millimeters]
ITEM
CASE SIZE (Diameter x Length)
0.236 x 0.433
[6.0 x 11.0]
0.315 x 0.472
[8.0 x 12.0]
0.394 x 0.512
[10.0 x 13.0]
0.394 x 0.630
[10.0 x 16.0]
0.394 x 0.787
[10.0 x 20.0]
d - Lead-wire diameter 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63] 0.025 [0.63]
P - Pitch of component 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7]
P0 - Feed hole pitch 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7] 0.500 [12.7]
F - Lead-to-lead distance 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0] 0.197 [5.0]
K - Clinch height 0.098 [2.5] 0.157 [4.0] N/A N/A N/A
H - Height of component from tape center
0.728 [18.5] 0.787 [20.0] 0.906 [23.0] 0.906 [23.0] 0.906 [23.0]
H0 -
Lead-wire clinch height
0.630 [16.0] 0.630 [16.0] N/A N/A N/A
W - Tape width 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0] 0.709 [18.0]
W0 -
Hold down tape width
0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0] 0.591 [15.0]
D0 - Feed hole diameter 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0] 0.157 [4.0]
t - Total tape thickness 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7] 0.028 [0.7]
L1 -Maximumlead protrusion 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0] 0.118 [3.0]
Note
Positive leader is standard. Negative leader is available by special order
DESCRIPTION
CODE EXPLANATION
757D product type
108 capacitance value (1000 µF)
M tolerance (M = ± 20 %)
010 voltage rating at 105 °C (6r3 = 6.3 V)
CG can size (see dimensions table)
3 sleeve and sealing (3 = p.v.c. sleeve w/epoxy end seal)
D packaging (D = bulk; straight leads)
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF) PART NUMBER NOMINAL CASE SIZE
D x L
Max. ESR
At + 25 °C (mΩ)
Max. RIPPLE
At + 105 °C(A)
Max. Z
At + 25 C(mΩ)
100 Hz
120 Hz 20 kHz - 40 kHz 120 Hz
20 kHz - 40 kHz
6.3 WVDC At 105 °C, SURGE = 8 V
470.0 757D477M6R3BB4D 0.315 x 0.472 [8.0 x 12.0] 523.0 163.0 0.47 0.658 198.0
680.0 757D687M6R3CC4D 0.394 x 0.512 [10.0 x 13.0] 310.0 98.0 0.65 0.907 120.0
820.0 757D827M6R3CD4D 0.394 x 0.630 [10.0 x 16.0] 194.0 77.0 0.88 1.09 96.0
1200.0 757D128M6R3CG4D 0.394 x 0.787 [10.0 x 20.0] 130.0 53.0 1.20 1.47 65.0
2200.0 757D228M6R3DG4D 0.492 x 0.787 [12.5 x 20.0] 113.0 38.0 1.33 1.81 49.0
2700.0 757D278M6R3DK4D 0.492 x 0.984 [12.5 x 25.0] 76.0 31.0 1.78 2.18 40.0
3900.0 757D398M6R3DT4D 0.492 x 1.319 [12.5 x 33.5] 49.0 20.0 2.45 2.98 26.0
5600.0 757D568M6R3DS4D 0.492 x 1.673 [12.5 x 42.5] 34.0 17.0 3.26 3.61 21.0
5600.0 757D568M6R3EK4D 0.630 x 0.984 [16.0 x 25.0] 62.0 22.0 2.15 2.82 28.0
6800.0 757D688M6R3EN4D 0.630 x 1.260 [16.0 x 32.0] 43.0 19.0 2.84 3.35 24.0
8200.0 757D828M6R3ER4D 0.630 x 1.417 [16.0 x 36.0] 35.0 16.0 3.30 3.82 20.0
12 000.0 757D129M6R3EU4D 0.630 x 1.575 [16.0 x 40.0] 31.0 14.0 3.63 4.24 18.0
12 000.0 757D129M6R3FR4D 0.709 x 1.417 [18.0 x 36.0] 38.0 16.5 3.20 3.83 21.0
15 000.0 757D159M6R3FV4D 0.709 x 1.575 [18.0 x 40.0] 32.0 15.0 3.68 4.28 19.0
Note
Case Style 3 = PVC sleeve with resin seal standard. Required for exposure to halogenated cleaning solvents. Case style 4 = PVC sleeve.
757D
Vishay Sprague Aluminum Capacitors
+ 105 °C, Miniature, Radial Lead
www.vishay.com For technical questions, contact: aluminumcaps4@vishay.com Document Number: 42056
422 Revision: 31-Jul-08
10 WVDC At 105 °C, SURGE = 13 V
330.0 757D337M010BB4D 0.315 x 0.472 [8.0 x 12.0] 576.0 163.0 0.45 0.658 198.0
470.0 757D477M010CC4D 0.394 x 0.512 [10.0 x 13.0] 340.0 98.0 0.62 0.907 120.0
560.0 757D567M010CD4D 0.394 x 0.630 [10.0 x 16.0] 212.0 77.0 0.84 1.09 96.0
1000.0 757D108M010CG4D 0.394 x 0.787 [10.0 x 20.0] 142.0 53.0 1.14 1.47 65.0
1800.0 757D188M010DG4D 0.492 x 0.787 [12.5 x 20.0] 123.0 38.0 1.28 1.81 49.0
2200.0 757D228M010DK4D 0.492 x 0.984 [12.5 x 25.0] 82.0 31.0 1.71 2.18 40.0
10 WVDC At 105 °C, SURGE = 13 V
2700.0 757D278M010DT4D 0.492 x 1.319 [12.5 x 33.5] 53.0 20.0 2.35 2.98 26.0
3900.0 757D398M010DS4D 0.492 x 1.673 [12.5 x 42.5] 37.0 17.0 3.13 3.61 21.0
3900.0 757D398M010EK4D 0.630 x 0.984 [16.0 x 25.0] 66.0 22.0 2.15 2.82 28.0
5600.0 757D568M010EN4D 0.630 x 1.260 [16.0 x 32.0] 45.0 19.0 2.77 3.35 24.0
6800.0 757D688M010ER4D 0.630 x 1.417 [16.0 x 36.0] 37.0 16.0 3.22 3.82 20.0
8200.0 757D828M010EU4D 0.630 x 1.575 [16.0 x 40.0] 33.0 14.0 3.54 4.24 18.0
8200.0 757D828M010FR4D 0.709 x 1.417 [18.0 x 36.0] 40.0 16.5 3.14 3.83 21.0
10 000.0 757D109M010FV4D 0.709 x 1.575 [18.0 x 40.0] 33.0 15.0 3.61 4.28 19.0
16 WVDC At 105 °C, SURGE = 20 V
270.0 757D277M016BB4D 0.315 x 0.472 [8.0 x 12.0] 703.0 163.0 0.40 0.658 198.0
330.0 757D337M016CC4D 0.394 x 0.512 [10.0 x 13.0] 410.0 98.0 0.56 0.907 120.0
390.0 757D397M016CD4D 0.394 x 0.630 [10.0 x 16.0] 257.0 77.0 0.77 1.09 96.0
680.0 757D687M016CG4D 0.394 x 0.787 [10.0 x 20.0] 171.0 53.0 1.04 1.47 65.0
1200.0 757D128M016DG4D 0.492 x 0.787 [12.5 x 20.0] 145.0 38.0 1.26 1.81 49.0
1500.0 757D158M016DK4D 0.492 x 0.984 [12.5 x 25.0] 97.0 31.0 1.57 2.18 45.0
2200.0 757D228M016DT4D 0.492 x 1.319 [12.5 x 33.5] 62.0 20.0 2.17 2.98 26.0
3300.0 757D338M016DS4D 0.492 x 1.673 [12.5 x 42.5] 43.0 17.0 2.88 3.61 21.0
2700.0 757D278M016EK4D 0.630 x 0.984 [16.0 x 25.0] 74.0 22.0 2.15 2.82 28.0
3900.0 757D398M016EN4D 0.630 x 1.260 [16.0 x 32.0] 51.0 19.0 2.61 3.35 24.0
4700.0 757D478M016ER4D 0.630 x 1.417 [16.0 x 36.0] 41.0 16.0 3.04 3.82 20.0
5600.0 757D568M016EU4D 0.630 x 1.575 [16.0 x 40.0] 37.0 14.0 3.34 4.24 18.0
6800.0 757D688M016FR4D 0.709 x 1.417 [18.0 x 36.0] 44.0 16.5 3.01 3.83 21.0
8200.0 757D828M016FV4D 0.709 x 1.575 [18.0 x 40.0] 36.0 15.0 3.45 4.28 19.0
25 WVDC At 105 °C, SURGE = 32 V
180.0 757D187M025BB4D 0.315 x 0.472 [8.0 x 12.0] 851.0 163.0 0.37 0.658 198.0
220.0 757D227M025CC4D 0.394 x 0.512 [10.0 x 13.0] 493.0 98.0 0.51 0.907 120.0
270.0 757D277M025CD4D 0.394 x 0.630 [10.0 x 16.0] 308.0 77.0 0.70 1.09 96.0
470.0 757D477M025CG4D 0.394 x 0.787 [10.0 x 20.0] 206.0 53.0 0.95 1.47 65.0
820.0 757D827M025DG4D 0.492 x 0.787 [12.5 x 20.0] 171.0 38.0 1.12 1.81 49.0
1000.0 757D108M025DK4D 0.492 x 0.984 [12.5 x 25.0] 114.0 31.0 1.45 2.18 40.0
1500.0 757D158M025DT4D 0.492 x 1.319 [12.5 x 33.5] 73.0 20.0 1.99 2.98 26.0
2200.0 757D228M025DS4D 0.492 x 1.673 [12.5 x 42.5] 51.0 17.0 2.66 3.61 21.0
1800.0 757D188M025EK4D 0.630 x 0.984 [16.0 x 25.0] 83.0 22.0 2.15 2.82 28.0
2700.0 757D278M025EN4D 0.630 x 1.260 [16.0 x 32.0] 57.0 19.0 2.46 3.35 24.0
3300.0 757D338M025ER4D 0.630 x 1.417 [16.0 x 36.0] 47.0 16.0 2.87 3.82 20.0
3900.0 757D398M025EU4D 0.630 x 1.575 [16.0 x 40.0] 41.0 14.0 3.15 4.24 18.0
3900.0 757D398M025FR4D 0.709 x 1.417 [18.0 x 36.0] 48.0 16.5 2.87 3.83 21.0
4700.0 757D478M025FV4D 0.709 x 1.575 [18.0 x 40.0] 40.0 15.0 3.30 4.28 19.0
Note
Case Style 3 = PVC sleeve with resin seal standard. Required for exposure to halogenated cleaning solvents. Case style 4 = PVC sleeve.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF) PART NUMBER NOMINAL CASE SIZE
D x L
Max. ESR
At + 25 °C (mΩ)
Max. RIPPLE
At + 105 °C(A)
Max. Z
At + 25 C(mΩ)
100 Hz
120 Hz 20 kHz - 40 kHz 120 Hz
20 kHz - 40 kHz
Document Number: 42056 For technical questions, contact: aluminumcaps4@vishay.com www.vishay.com
Revision: 31-Jul-08 423
757D
Aluminum Capacitors
+ 105 °C, Miniature, Radial Lead Vishay Sprague
35 WVDC At 105 °C, SURGE = 44 V
120.0 757D127M035BB4D 0.315 x0 .472 [8.0 x 12.0] 1073.0 163.0 0.33 0.658 198.0
150.0 757D157M035CC4D 0.394 x 0.512 [10.0 x 13.0] 617.0 98.0 0.46 0.907 120.0
180.0 757D187M035CD4D 0.394 x 0.630 [10.0 x 16.0] 386.0 77.0 0.62 1.09 96.0
330.0 757D337M035CG4D 0.394 x 0.787 [10.0 x 20.0] 257.0 53.0 0.85 1.47 65.0
560.0 757D567M035DG4D 0.492 x 0.787 [12.5 x 20.0] 210.0 38.0 1.12 1.81 49.0
680.0 757D687M035DK4D 0.492 x 0.984 [12.5 x 25.0] 140.0 31.0 1.35 2.18 40.0
1000.0 757D108M035DT4D 0.492 x 1.319 [12.5 x 33.5] 90.0 20.0 1.80 2.98 26.0
1500.0 757D158M035DS4D 0.492 x 1.673 [12.5 x 42.5] 63.0 17.0 2.40 3.61 21.0
1200.0 757D128M035EK4D 0.630 x 0.984 [16.0 x 25.0] 97.0 22.0 2.15 2.82 28.0
1800.0 757D188M035EN4D 0.630 x 1.260 [16.0 x 32.0] 67.0 19.0 2.28 3.35 24.0
2200.0 757D228M035ER4D 0.630 x 1.417 [16.0 x 36.0] 54.0 16.0 2.65 3.82 20.0
2700.0 757D278M035EU4D 0.630 x 1.575 [16.0 x 40.0] 48.0 14.0 2.92 4.24 18.0
2700.0 757D278M035FR4D 0.709 x 1.417 [18.0 x 36.0] 54.0 16.5 2.69 3.83 21.0
3300.0 757D338M035FV4D 0.709 x 1.575 [18.0 x 40.0] 45.0 15.0 3.09 4.28 19.0
Note
Case Style 3 = PVC sleeve with resin seal standard. Required for exposure to halogenated cleaning solvents. Case style 4 = PVC sleeve.
STANDARD RATINGS in inches [millimeters]
CAPACITANCE
(µF) PART NUMBER NOMINAL CASE SIZE
D x L
Max. ESR
At + 25 °C (mΩ)
Max. RIPPLE
At + 105 °C(A)
Max. Z
At + 25 C(mΩ)
100 Hz
120 Hz 20 kHz - 40 kHz 120 Hz
20 kHz - 40 kHz
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
