XLG-150 150W Constant Power Mode LED Driver 110 M M (For 24V only) (Except for L type) IS 15885(Part 2/Sec13) LVLE SELV THOMAS SAMUEL THOMAS SAMUEL R-41027766 (Except for L type) (for XLG-150I type only ) Features * Wide input range 100~305V AC( Class I) * Full power output at 70~100% Constant power mode operation * Metal case with IP67, suitable for outdoor application * Surge protection with 6KV/4KV (10KV/6KV optional) * 3 in 1 dimming function (Dim to off and Isolation design) * India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours * Protection functions: OVP/SCP/OCP/OTP * Life time >50,000 hrs. and 5 years warranty Type HL E320521 series 05 Note.12 (for 12,24 only) Applications * Skyscraper lighting * Street lighting * Floodlight Lighting * Stage lighting * Fishing lighting * Horticulture lighting * Bay lighting * DMX power supply * Type HL for use in class I, Division 2 Description XLG -150 series is a 150W LED AC / DC driver featuring the constant power mode. XLG -150 operates from 100~305 VAC and offers models with different rated current ranging between 700mA and 12500mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40~+90 case temperature under free air convection. The design of metal housing and IP 67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LED s for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG- 150 series comply with the latest version of IEC 61347 / GB 7000 . 1 - 2015 and UL 8750 international safety regulations . The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation. Model Encoding XLG - 150 I - L Function options Rated output voltage(12/24V or L/M/H types) I: for India version(by request with Input over voltage protection) :For standard version Rated wattage Series name Type Blank A AB Function Io and Vo fixed.(For harsh environment) Io adjustable via built-in potentiometer Io adjustable via built-in potentiometer + 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Note By request In Stock In Stock Note: 12V and 24V models without the AB type File Name:XLG-150-SPEC 2019-07-05 150W Constant Voltage + Constant Current LED Driver XLG-150 series SPECIFICATION XLG-150 MODEL -12- XLG-150 12V DC VOLTAGE CONSTANT CURRENT REGION Note.2 8.4~ 12V RATED CURRENT 12.5A 150W RATED POWER RIPPLE & NOISE (max.) Note.3 150mVp-p CURRENT ADJ. RANGE OUTPUT Adjustable for A-Type only (via the built-in potentiometer) VOLTAGE TOLERANCE Note.4 3.2~ 6.25A 2.0% LINE REGULATION 0.5% 0.5% LOAD REGULATION SETUP, RISE TIME Note.6 2% 1% 500ms, 100ms/230VAC, 1200ms, 100ms/115VAC HOLD UP TIME (Typ.) 10ms/ 230VAC 10ms/ 115VAC Note.5 FREQUENCY RANGE INPUT 16.8~ 24V 6.25A 150W 240mVp-p 6.5~ 12.5A 3.0% VOLTAGE RANGE POWER FACTOR TOTAL HARMONIC DISTORTION EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(Typ.) 100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) 47 ~ 63Hz PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load THD< 10%(@load50%/115VC,230VAC; @load75%/277VAC) 91.5% 1.8A / 115VAC 93% 1.0A / 230VAC COLD START 50A(twidth=500s measured at 50% Ipeak) at 230VAC; Per NEMA 410 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD POWER CONSUMPTION No load power consumption <0.5W for A-Type SHORT CIRCUIT PROTECTION OVER VOLTAGE INPUT OVER VOLTAGE Note.7 OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 95 ~ 108% Hiccup mode or constant current limiting, recovers automatically after fault condition is removed Hiccup mode or constant current limiting, recovers automatically after fault condition is removed 27 ~ 34V 13.5 ~ 18V Shut down output voltage, re-power on to recover 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed) can survive input voltage stress of 440Vac for 48 hours Hiccup mode, recovers automatically after fault condition is removed Tcase=-40 ~ +90 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) Tcase=+90 20 ~ 95% RH non-condensing -40 ~ +90, 10 ~ 95% RH 0.06%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.7 UL8750(type"HL"), UL879,CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; EAC TP TC 004; IS15885(Part2/Sec13)(for XLG-150I type only);IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH I/P-FG:2KVAC Parameter EMC EMISSION SAFETY & EMC EMC IMMUNITY OTHERS NOTE 0.8A/277VAC MAX. No. of PSUs on 16A CIRCUIT BREAKER OVER CURRENT -24- 24V O/P-FG:1.5KVAC Standard EN55015(CISPR15) ,GB/T17743 Test Level/Note Conducted Radiated EN55015(CISPR15) ,GB/T17743 ----- Harmonic Current EN61000-3-2 ,GB/T17625.1 Class C @load50% Voltage Flicker EN61547 EN61000-3-3 ----- Parameter ESD Radiated Standard EN61000-4-2 EN61000-4-3 Test Level/Note Level 3, 8KV air ; Level 2, 4KV contact Level 2 EFT/Burst Surge Conducted Magnetic Field EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 Voltage Dips and Interruptions EN61000-4-11 Level 3 4KV/Line-Line 6KV/Line-Earth(6K/10K option) Level 2 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods MTBF 712.17K hrs min. DIMENSION PACKING 180*63*35.5mm (L*W*H) 0.8Kg;16pcs / 13.4Kg /0.67CUFT Telcordia SR-332 (Bellcore) ; 213.3Khrs min. ----- MIL-HDBK-217F (25) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7.Input over voltage only for XLG-150 I series ,and I series without UL/CSA certificate. 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9.The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less. 12.Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information. 13.For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains. File Name:XLG-150-SPEC 2019-07-05 XLG-150 150W Constant Power Mode LED Driver series SPECIFICATION MODEL XLG-150 RATED CURRENT RATED POWER OUTPUT CURRENT RIPPLE CURRENT TOLERANCE 5% SET UP TIME 500ms/230 VAC , 1200ms/115 VAC 27 ~ 56V 2680~4170mA 60V 700~2100mA 3.0%(@ full load) THD < 10% (@ load50% at 115 VAC /230 VAC ,@load75% at 277 VAC ) Please refer to " TOTAL HARMONIC DISTORTION ( THD )" section EFFICIENCY (Typ.) AC CURRENT (Typ.) 93% 1.8A / 115VAC INRUSH CURRENT(Typ.) MAX. NO. of PSUs on 16A CIRCUIT BREAKER LEAKAGE CURRENT 1400~4170mA 3.0%(@ full load) 1.0A / 230VAC 92.5% 0.8A/277VAC 92% COLD START50A(twidth=500s measured at 50% Ipeak) at 230VAC; Per NEMA 410 4 unit(circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC <0.75mA / 277VAC Note.14 Standby power consumption <0.5W for AB-Type(Dimming OFF) Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed 128~ 150V 230 ~ 265V Shut down output voltage, re-power on to recovery OVER VOLTAGE INPUT OVER VOLTAGE Note.7 OVER TEMPERATURE 61 ~ 78V 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed) can survive input voltage stress of 440Vac for 48 hours Hiccup mode, recovers automatically after fault condition is removed Tcase=-40 ~ +90(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) WORKING TEMP. MAX. CASE TEMP. Tcase=+90 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH non-condensing TEMP. COEFFICIENT VIBRATION 0.06%/ (0 ~ 60) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.7 UL8750(type"HL"), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; EAC TP TC 004; IS15885(Part2/Sec13)(for XLG-150I type only);IP67 approved WITHSTAND VOLTAGE I/P-O/P:3.75 KVAC ISOLATION RESISTANCE I/P-O/P, I/P- FG , O/P- FG :100M Ohms / 500 VDC / 25/ 70% RH I/P- FG :2 KVAC Parameter SAFETY & EMC EMC IMMUNITY NOTE 60 ~ 107V 1400~2100mA 115V TOTAL HARMONIC DISTORTION EMC EMISSION MTBF LIFETIME DIMENSION PACKING -H- 47 ~ 63Hz PF0.97 / 115VAC, PF0.95 / 230VAC, PF0.92 / 277VAC at full load (Please refer to "Power Factor Characteristic" section) POWER FACTOR (Typ.) STANDBY POWER CONSUMPTION SHORT CIRCUIT XLG-150 2800mA 150W 100 ~ 305VAC 142VDC ~ 431VDC Note.5 (Please refer to "STATIC CHARACTERISTIC" ang " DRIVING METHODS OF LED MODULE"section) FREQUENCY RANGE OTHERS -M- 1400mA 150W Adjustable for A/AB-Type only (via the built-in potentiometer) 350~1050mA 4.0%(@ full load) VOLTAGE RANGE PROTECTION XLG-150 CONSTANT CURRENT REGION 120 ~214V FULL POWER CURRENT RANGE 700~1050mA OPEN CIRCUIT VOLTAGE (max.) 225V CURRENT ADJ. RANGE INPUT -L- 700mA 150W O/P- FG :1.5 KVAC Standard EN55015(CISPR15) ,GB/T17743 Test Level/Note Conducted Radiated EN55015(CISPR15) ,GB/T17743 ----- Harmonic Current EN61000-3-2 ,GB/T17625.1 Class C @load50% Voltage Flicker EN61547 Parameter EN61000-3-3 ----- Standard Test Level/Note ESD EN61000-4-2 Radiated EN61000-4-3 Level 3, 8KV air ; Level 2, 4KV contact Level 2 EFT/Burst EN61000-4-4 Level 3 Surge EN61000-4-5 Conducted EN61000-4-6 4KV/Line-Line 6KV/Line-Earth(6K/10K option) Level 2 Magnetic Field EN61000-4-8 Level 4 Voltage Dips and Interruptions EN61000-4-11 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods 712.17K hrs min. Telcordia SR-332 (Bellcore) ; 213.3Khrs min. ----- MIL-HDBK-217F (25) Note.4 50000 hrs min. 180*63*35.5mm (L*W*H) 0.8Kg;16pcs/13.4Kg/0.67CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7. Input over voltage only for XLG-150 I series ,and I series without UL/CSA certificate. 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 11. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less. 12. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information. 13. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 14. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains. File Name:XLG-150-SPEC 2019-07-05 XLG-150 150W Constant Power Mode LED Driver series BLOCK DIAGRAM PFC fosc : 50~120 KH z PWM fosc : 60~130 KH z EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM- O.C.P. (AB Type) FG O.L.P. DETECTION CIRCUIT PWM CONTROL PFC CONTROL O.T.P. O.V.P. DRIVING METHODS OF LED MODULE I - V Operating Area 240V 120V 220V 350mA,214V 200V 100V 180V 90V 160V 700mA,107V 110V 700mA,214V 1050mA,142V 140V 1400mA,107V 2100mA,71V 80V 70V 120V 1050mA,120V 620mA,120V 100V 0mA 250mA 500mA 60V 750mA 1000mA 12 50mA 0mA Recommend Performance Region 60V 550mA 1100mA 1650mA 2200mA Recommend Performance Region This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. 2680mA,56V 1400mA,56V 2100mA,60V 1250mA,60V 50V 55V 50V 100 4170mA,36V 40V 35V Vo(%) 45V (B) Constant Current area (A) Constant V oltage area 60 (min.) 30V 25V 2680mA,27V 20V 0mA (C) Hiccup Protection 4170mA,27V 600mA 1200mA 1800mA 2400mA 3000mA 3600mA 4200mA 50 100 In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please please contact MEAN WELL. Io(%) Typical output current normalized by rated current (%) Recommend Performance Region File Name:XLG-150-SPEC 2019-07-05 XLG-150 150W Constant Power Mode LED Driver series DIMMING OPERATION AC/N(Blue) AC/L(Brown) FG(Green/Yellow) DIM-(White) DIM+( Blue ) XLG-150 Vo-(Black) Vo+(Red) 3 in 1 dimming function (for AB-Type) *Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. *Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. *Dimming source current from power supply: 100A (typ.) 100% 90% Vo- + + - - DIM+ + Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage 100% 90% Vo- + + - - DIM+ Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 100% 90% Vo- 80% + - - DIM+ Additive Resistance Output current (%) Vo+ + 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to Vo-" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation) Dimming input: Additive resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%. 2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:XLG-150-SPEC 2019-07-05 XLG-150 150W Constant Power Mode LED Driver series OUTPUT LOAD vs TEMPERATURE 230VAC 100 100 90 80 230VAC 80 Input only 100VAC 60 LOAD (%) 60 LOAD (%) 230VAC Input only 40 20 -40 -30 -10 0 15 30 40 55 40 20 -40 70 (HORIZONTAL) -30 0 10 30 50 70 90 (HORIZONTAL) If XLG-150 operates in Constant Current mode with the rated current the maximum workable Ta is 55 (Typ. 230VAC) or 40 (Typ.100VAC) Below 110VAC@ -30 may retry to 2nd setup STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 75 Constant Current Mode 100 1 0.98 90 0.96 80 PF 0.94 LOAD (%) 70 0.92 277V 0.9 60 50 0.88 230V 0.86 115V 0.84 40 0.82 0.8 100 110 140 160 180 200 220 240 260 280 305 50% 60% INPUT VOLTAGE (V) 60Hz 80% 90% LOAD TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD XLG-150 series possess superior working efficiency that up to 93% can be reached in field applications. XLG-150-L Model, Tcase at 75 XLG-150-L Model, Tcase at 75 11% 96 10% 92 9% 88 7% 277V 6% 230V 5% 115V 4% 3% 2% EFFICIENCY(%) 8% THD 70% 84 277V 80 230V 76 115V 72 68 64 1% 60 0% 50% 60% 70% 80% LOAD 90% 100% 50% 60% 70% 80% 90% LOAD File Name:XLG-150-SPEC 2019-07-05 XLG-150 150W Constant Power Mode LED Driver series LIFE TIME 120 LIFETIME(Kh) 100 80 60 40 20 0 25 30 35 40 45 50 55 60 65 70 75 80 85 90 Tcase ( ) File Name:XLG-150-SPEC 2019-07-05 XLG-150 150W Constant Power Mode LED Driver MECHANICAL SPECIFICATION Case No.: 243A series Unit:mm Blank-Type 180 169 156 tc SJOW 17AWGx3C 2 &H05RN-F 3x1.0mm Vo-(Black) Vo+(Red) 70 SJOW 17AWGx2C&05RN-F 2x1.0mm 2 (for H,L,M) SJOW 14AWGx2C(for 12,24V) 22 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 63 30020 45.8 30020 4-4.5 35 35.5 tc A-Type 180 169 30020 tc SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 Vo-(Black) Vo+(Red) 70 SJOW 17AWGx2C&05RN-F 2x1.0mm 2 (for H,L,M) SJOW 14AWGx2C(for 12,24V) 22 4-4.5 35 35.5 tc 14 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 63 156 45.8 30020 38.3 File Name:XLG-150-SPEC 2019-07-05 XLG-150 150W Constant Power Mode LED Driver series AB-Type 180 169 35020 tc SJOW 17AWGx3C &H05RN-F 3x1.0mm 2 UL2517 20AWGx2C DIM+( Blue ) DIM-(White) Vo-(Black) Vo+(Red) 70 SJOW 17AWGx2C &05RN-F 2x1.0mm 2 22 AC/N(Blue) AC/L(Brown) FG(Green/Yellow) 63 156 45.8 30020 30020 4-4.5 35 35.5 tc INSTALLATION MANUAL File Name:XLG-150-SPEC 2019-07-05