LOW FREQUENCY.FH8 Fri Apr 19 14:48:33 2002 Pagina 1
This 21" bass loudspeaker has been specifically designed to deliver high impact bass response, with exceptional high power handling capacity. It
incorporates an edgewound copper ribbon voice coil (4"_ diameter) and powerful, vented magnet structure. The result is an incredibly highly
efficient transducer for subwoofer applications.
Este altavoz de graves de 21 ha sido diseñado específicamente para entregar una respuesta de graves de gran impacto, con una potencia admisible
excepcional. Incorpora una bobina de 41/2 (114 mm) de diámetro realizada en hilo plano de cobre y un sofisticado sistema magnético con
ventilación central. El resultado es un transductor de elevada eficiencia para aplicaciones de subgraves.
-Pro-
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=200,00 I, fb=33,0 Hz
TIME RESPONSE, MAGN.
Re + Red(w) CURVE
21L50
LOW
FREQUENCY
SPECIFICATIONS
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
MOUNTING INFORMATION
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
MATERIALS
Basket
Cone
Surround
Voice coil
Magnet
THIELE-SMALL PARAMETERS**
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ho (%)
Effective Surface Area, Sd(m
2
)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
- 3 -
540 mm. 21 in.
8 ohms
800 w RMS
1600 w RMS
98 dB 2.83v @ 1m @ 2þ
25 - 1200 Hz
100 / 250 l 3.5 / 8.75 ft.
3
114 mm. 4.5 in.
12 kg. 26.4 lb.
28 N / A
0.287 kg.
25 mm
11 mm
35 mm
550 mm. 21.65 in.
528 mm. 20.68 in.
495 mm. 19.48 in.
510 mm. 20.07 in.
235 mm. 9.25 in.
20 l 0.7 ft.
3
15 kg. 33 lb.
19 kg. 41.8 lb.
Die cast aluminium
Paper
Treated cloth
Edgewound copper ribbon
Ferrite
33 Hz
6 ohms.
12.03
0.45
0.43
350 l
80
µm
/N
5 kg/s
2.7
0.1764 m
2
9 mm
1600 cm.
3
2.4 mH
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=150,00 I, fb=38,0 Hz
TIME RESPONSE, MAGN.
Re + Red(w) CURVE
This 18” bass loudspeaker has been specifically designed to deliver high impact bass response, with exceptional high power handling capacity. It
incorporates an edgewound ribbon voice coil (4”1/2 diameter) and massive vented magnetic structure. An optimum cooling system allows a fast
heat exchange, thus reducing the thermal power compression. This model covers the low frequency range with smooth response, low harmonic
distortion and high efficiency.
18G550
LOW
FREQUENCY
Este modelo de 18”está diseñado para entregar unos bajos impactantes con una potencia admisible poco común. Para ello, utiliza una bobina de
4”1/2 (114mm.) de diámetro realizada en hilo plano de cobr e, y un sistema magnético sobredimensionado. Un optimizado sistema de refrigeración
permite un rápido intercambio del calor generado por la bobina reduciendo de esta manera la compresión de potencia por efecto térmico.
Este altavoz cubre la gama de bajas frecuencias con una respuesta plana y baja distorsión armónica.
SPECIFICATIONS
460 mm. 18 in.
8 ohms.
750 RMS
1500 Watts.
98 dB, 2.83v @ 1m @ 2π
25-1500 Hz
80-200 l 2.8-7 ft.3
114 mm. 4.5 in.
11.5 kg. 25.3 lb.
24.4 N/A
0.190 kg.
25 mm.
11 mm.
40 mm.
460 mm. 18.11 in.
438 mm. 17.24 in.
415 mm. 16.34 in.
400 mm. 15.75 in.
210 mm. 8.27 in.
13 l 0.46 ft.3
14 kg. 30.8 lb.
15.65 kg. 34.43 lb.
Die Cast aluminium
Paper
Plasticised cloth
Edgewound copper ribbon
Ferrite
36 Hz
5.25 ohms.
8.875
0.385
0.37
210 l
103 µm/N
5.50 kg/s
2.5
0.1200 m2
9 mm.
1075 cm.3
1.4 mH
-Pro-
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
THIELE-SMALL PARAMETERS**
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
- 4 -
This 18” low frequency transducer has been speciall y designed to supply incr edibl y high sound pr essur e in the low frequency region, with exceptional
high power capacity and minimum harmonic distortion. This model features a 4”1/2 (114 mm) voice coil, edgewound aluminium ribbon wire, a
moving mass at least half the weight of pure copper, a powerful, vented magnetic circuit, optimum cooling system which provides fast heat exchange,
reduced thermal power compression and double spider assembly. The result is an incredible highly efficient transducer f or subwoofer applications,
the ability to handle high elongation, extremely low distortion and reduced thermal power compression.
Este tranductor de 18” ha sido diseñado para entregar altos niveles de presión acústica con una potencia admisible impresionante. Incorpora una
bobina de 4”1/2 (114 mm.) realizada con hilo de aluminio de masa menor a la mitad de la que tendría en cobr e; Utiliza un potente circuito magnético
con un sistema optimizado de ventilación que proporciona un rápido intercambio del calor generado en la bobina, y una suspensión de doble
centrador para controlar los desplazamientos en grandes elongaciones. Este modelo se caracteriza por un elevado rendimiento, alta potencia
admisible y excelente linealidad de la respuesta en frecuencia.
-Pro-
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=120,00 I, fb=50,0 Hz
SPECIFICATIONS
460 mm. 18 in.
8 ohms.
700 w RMS
1400 Watts.
98 dB, 2.83v @ 1m @ 2π
25-1500 Hz
80-200 l 2.8-7 ft.3
114 mm. 4.5 in.
11.5 kg. 25.3 lb.
28.8 N/A
0.170 kg.
25 mm.
11 mm.
40 mm.
460 mm. 18.11 in.
438 mm. 17.24 in.
415 mm. 16.34 in.
425 mm. 16.73 in.
210 mm. 8.27 in.
13 l 0.46 ft.3
14 kg. 30.8 lb.
15.65 kg. 34.43 lb.
Die Cast aluminium
Paper
Plasticised cloth
Edgewound alum. flat wire
Ferrite
40 Hz
6.1 ohms.
12.05
0.334
0.325
212 l
93 µm/N
3.54 kg/s
4
0.1320 m2
9 mm.
1180 cm.3
2 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
THIELE-SMALL PARAMETERS**
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
18G50
LOW
FREQUENCY
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
Re + Red(w) CURVE
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
- 5 -
This 18” long excursion bass loudspeaker has been specificall y designed to deliver high impact bass response, with exceptional high power handling
capacity (600w RMS). It incorporates an edgewound ribbon voice coil (4” diameter) and vented magnetic structure. An optimum cooling system
allows a fast heat exchange and contributes to the reduction of thermal power compression.
Modelo de 18” de gran desplazamiento para aplicaciones fundamentalmente de baja y muy baja frecuencia (subgraves). Este altavoz se caracteriza
por una bobina de gran tamaño (4”) con una potencia excepcionalmente alta (600 W RMS) debido a una estudiada refrigeración del bobinado, un
excelente rendimiento y una reducida distorsión armónica.
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=150,00 I, fb=30 Hz
Re + Red(w) CURVE
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
TIME RESPONSE, MAGN.
18LX60
LOW
FREQUENCY
SPECIFICATIONS
460 mm. 18 in.
8 ohms.
600 w RMS
1200 Watts.
98 dB, 2.83v @ 1m @ 2π
25-1000 Hz
80-250 l 2.8/8.8 ft.3
100 mm. 4 in.
9 kg. 19.84 lb.
20.5 N/A
0.172 kg.
23 mm.
8 mm.
40 mm.
460 mm. 18.11 in.
438 mm. 17.24 in.
415 mm. 16.34 in.
425 mm. 16.73 in.
195 mm. 7.67 in.
13 l 0.46 ft.3
11.5 kg. 25.3 lb.
13 kg. 28.6 lb.
Cast aluminium
Paper
Treated cloth
Edgewound copper wire
Ferrite
27 Hz
5.5 ohms.
11.45
0.38
0.37
500 l
248 µm/N
2.2 kg/s
2.5
0.1320 m2
9 mm.
1200 cm.3
1,2 mH
-Pro-
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
THIELE-SMALL PARAMETERS**
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ηo (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
195
175
14
228
415
438
460
7
Normalized Amplitude Response (dB/Hz)
- 6 -
-Pro-
- 7 -
This 18” bass driver, with winding length optimised for increased linear excursion and dual suspension system (double spider assembly) ensures
that the voice coil maintains pure axial movement at all times. The magnetic structure construction generates a symmetrical magnetic field and, at
the same time, provides an efficient thermal path which contributes to heat dissipation.
This model is suitable for use in high power sound reinforcement systems, of various enclosure types.
Este modelo de 18”, con una bobina de 4” de diámetro optimizada para asegurar un desplazamiento lineal incluso en desplazamientos importantes
gracias a su sistema de doble centrador, utiliza un circuito magnético simétrico para reducir la distorsión armónica, y de gran tamaño, lo que facilita
una rápida disipación del calor generado por la bobina, a lo que contribuye el macizo chasis de aluminio fundido a presión.
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=150,00 I, fb=40,0 Hz
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
Re + Red(w) CURVE
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
SPECIFICATIONS
460 mm. 18 in.
8 ohms.
400 w RMS
800 Watts.
99 dB, 2.83v @ 1m @ 2π
30-1500 Hz
80/250 l 2.8/8.8 ft.3
100 mm. 4 in.
9 kg. 19.84 lb.
22.3 N/A
0.158 kg.
22 mm.
9 mm.
28 mm.
460 mm. 18.11 in.
438 mm. 17.24 in.
415 mm. 16.34 in.
425 mm. 16.73 in.
195 mm. 7.67 in.
13 l 0.46 ft.3
11.5 kg. 25.3 lb.
13 kg. 28.6 lb.
Die Cast aluminium
Paper
Plasticised cloth
Edgewound copper ribbon
Ferrite
36 Hz
5.5 ohms.
8.840
0.386
0.37
300 l
125 µm/N
4 kg/s
3.4
0.1300 m2
7 mm.
910 cm.3
1.3 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
THIELE-SMALL PARAMETERS**
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
18G400
LOW
FREQUENCY
- 8 -
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
FREE AIR IMPEDANCE CURVE
Re + Red(w) CURVE
This 15” bass loudspeaker has been specifically designed to deliver high impact bass response, with exceptional high power handling capacity. It
incorporates an edgewound ribbon voice coil (4”1/2 diameter) and massive vented magnetic structure. An optimum cooling system allows a fast
heat exchange and contributes to the reduction of thermal power compression. This model covers the low frequency range with smooth response,
low harmonic distortion and high efficiency.
Este modelo de 15” utiliza la misma filosofía de construcción que los modelos de 18” de gran potencia: bobina de 4”1/2, realizada con hilo plano
de cobre, circuito magnético con sistema de disipación térmica optimizado para acelerar la evacuación del calor generado en la bobina y doble
centrador, para asegurar un control del desplazamiento en grandes elongaciones.
Este altavoz cubre el rango de bajas frecuencias con respuesta plana, baja distorsión armónica y alta eficiencia.
-Pro-
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=100.00 I, fb=50.0 Hz
SPECIFICATIONS
380 mm. 15 in.
8 ohms.
600 w RMS
1200 Watts.
98 dB, 2.83v @ 1m @ 2π
30-1500 Hz
50/250 l 1.75/5.25 ft.3
114 mm. 4.5 in.
10.8 kg. 23.76 lb.
24.3 N/A
0.142 kg.
21 mm.
9 mm.
35 mm.
388 mm. 15.28 in.
370 mm. 14.56 in.
352 mm. 13.85 in.
355 mm. 13.97 in.
170 mm. 6.69 in.
6 l 0.21 ft.3
12.2 kg. 26.84 lb.
13.2 kg. 29.04 lb.
Die Cast aluminium
Paper
Plasticised cloth
Flat copper wire
Ferrite
45 Hz
5.7 ohms.
10.5
0.33
0.32
115 l
88 µm/N
3.23 kg/s
3
0.088 m2
6.5 mm.
570 cm.3
1.2 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
15G450/N
LOW
FREQUENCY
THIELE-SMALL PARAMETERS**
-Pro-
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=120,00 I, fb=42 Hz
15LX60
LOW
FREQUENCY
SPECIFICATIONS
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
380 mm. 15 in.
8 ohms.
600 w RMS
1200 Watts.
98 dB 2.83V @ 1m @ 2π
30-1500 Hz
60-150 l 2.24/6 ft.3
100 mm. 4 in.
9 kg. 19.84 lb.
20.35 N/A
0.120 kg.
23 mm.
8 mm.
40 mm.
MOUNTING INFORMATION
388 mm. 15.28 in.
370 mm. 14.56 in.
362 mm. 14.25 in.
355 mm. 13.98 in.
145 mm. 5.7 in.
7 l 0.25 ft.3
10.4 kg. 22.92 lb.
11.5 kg. 25.35 lb.
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
MATERIALS
Basket
Cone
Surround
Voice coil
Magnet
Cast aluminium
Paper
Treated cloth
Edgewound copper wire
Ferrite
THIELE-SMALL PARAMETERS**
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ηo (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
35 Hz
5.5 ohms.
8.7
0.36
0.35
215 l
290 µm/N
2.9 kg/s
2.3
0.091 m2
9 mm
820 cm.3
1,2 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
132
11 7
370
145
228
362
388
Modelo de 15” de gran desplazamiento para aplicaciones fundamentalmente de baja y muy baja frecuencia (subgraves). Este altavoz se caracteriza
por una bobina de gran tamaño (4”) con una potencia excepcionalmente alta (600 W RMS) debido a una estudiada refrigeración del bobinado, un
excelente rendimiento y una reducida distorsión armónica.
This 15” long excursion bass loudspeaker has been specificall y designed to deliver high impact bass response, with exceptional high power handling
capacity (600w RMS). It incorporates an edgewound ribbon voice coil (4” diameter) and vented magnetic structure. An optimum cooling system
allows a fast heat exchange and contributes to the reduction of thermal power compression.
TIME RESPONSE, MAGN.
VOICE COIL INDUCTANCE CURVE Re + Red(w) CURVE
Normalized Amplitude Response (dB/Hz)
- 9 -
This 15” high compliance bass driver, with winding length optimised for increased linear excursion and dual suspension system (double spider
assembly) ensures that the voice coil maintains pure axial movement at all times. The magnetic structure construction generates a symmetrical
magnetic field and, at the same time, provides an efficient thermal path wich contributes to heat dissipation.
This model is suitable for use in high power sound reinforcement systems, of various enclosure types.
15G400
LOW
FREQUENCY
Modelo de 15” de alta elasticidad con bobina de 4” realizada con hilo rectangular de cobre. Reune unas características que lo hacen idóneo para
aplicaciones como subwoofer o como unidad de graves en sistemas profesionales de grandes prestaciones. Utiliza un circuito magnético ventilado
de configuración simétrica, lo que le confiere unas propiedades excepcionales: Baja distorsión, potencia admisible importante, reducida compresión
de potencia por efecto térmico y banda pasante hasta el extremo grave.
SPECIFICATIONS
-Pro-
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=80.00 I, fb=50.0 Hz
380 mm. 15 in.
8 ohms.
400 w RMS
800 Watts.
99 dB, 2.83v @ 1m @ 2π
25-1500 Hz
40/150 l 1.4/6 ft.3
100 mm. 4 in.
9 kg. 19.846 lb.
22.7 N/A
0.110 kg.
22 mm.
9 mm.
28 mm.
388 mm. 15.28 in.
370 mm. 14.56 in.
352 mm. 13.85 in.
355 mm. 13.98 in.
155 mm. 6.1 in.
7 l 0.25 ft.3
10.4 kg. 22.92 lb.
11.5 kg. 25.35 lb.
Die Cast aluminium
Paper
Plasticised cloth
Flat copper wire
Ferrite
35 Hz
6 ohms.
8.3
0.284
0.275
175 l
188 µm/N
2.9 kg/s
2.5
0.083 m2
7 mm.
580 cm.3
1.3 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
Re + Red(w) CURVE
THIELE-SMALL PARAMETERS**
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
- 10 -
LOW FREQUENCY.FH8 Fri Apr 19 14:48:33 2002 Pagina 2
-Pro-
- 10 -
115Nd/W
LOW
FREQUENCY
SPECIFICATIONS
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ho (%)
Effective Surface Area, Sd(m
2
)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
THIELE-SMALL PARAMETERS**
This 15" long excursion, lightweight bass loudspeaker has been specifically designed to deliver high impact bass response, with exceptional high
power handling capacity (400w RMS). The magnet structure incorporates a powerful neodymium magnet, reducing the total mass of the unit to
less than 50% of a conventional ferrite model. The power capacity is improved by the use of a ribbon voice coil (4"diameter) and extra vented
magnetic structure.
Este altavoz de graves de 15, ligero y de gran excursión, ha sido diseñado específicamente para entregar una respuesta de graves de gran impacto,
con una potencia admisible excepcional (400 W RMS). El sistema magnético incorpora un imán de neodimio potente, de manera que se reduce
el peso total de la unidad a menos del 50% del peso de un modelo de ferrita convencional. La potencia admisible se ha mejorado debido a la
utilización de una bobina de hilo plano (4 de diámetro) y una estructura magnética con ventilación adicional.
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=120.00 I, fb=50.0 Hz
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
FREE AIR IMPEDANCE CURVE
Re + Red(w) CURVE
380 mm. 15 in.
8 ohms
400 w RMS
800 w RMS
98.5 dB 2.83v @ 1m @ 2
þ
30 - 1500 Hz
60 / 150 l 2.1 / 5.3 ft.
3
100 mm. 4 in.
4 kg. 8.8 lb.
23.6 N/A
0.135 kg.
21 mm
9 mm
35 mm
388 mm. 15.28 in.
370 mm. 14.57 in.
352 mm. 13.86 in.
355 mm. 13.98 in.
135 mm. 5.31 in.
5 l 0.18 ft.
3
5.3 kg 11.66 lb.
6.5 kg. 14.3 lb.
Die cast aluminium
Paper
Treated cloth
Edgewound copper ribbon
Neodymium
37 Hz
5.2 ohms.
5.6
0.3
0.285
145 l
130
µm
/N
5.8 kg/s
2.75
0.0910 m
2
7 mm
630 cm.
3
2.1 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
This 15” model has been designed specifically to reinforce the low frequency range at very high power levels. It incorporates a winding length
optimised for increased linear excursion, provided by high compliance suspensions. The magnetic structure construction generates a symmetrical
magnetic field and, at the same time, provides an efficient thermal path which contributes to heat dissipation.
Modelo de 15” diseñado específicamente para aplicaciones en unidades graves o de subwoofer. El tamaño de la bobina (4”) y un cono de gran
rigidez, confieren a este altavoz una resistencia poco común frente a las más altas exigencias, tanto térmicas como mecánicas. Muy aconsejado
para sistemas compactos de tipo bass-reflex.
-Pro-
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=90.00 I, fb=45.0 Hz
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m.
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
FREE AIR IMPEDANCE CURVE
Re + Red(w) CURVE
15K200
LOW
FREQUENCY
SPECIFICATIONS
380 mm. 15 in.
8 ohms.
300 w RMS
600 Watts.
98 dB, 2.83v @ 1m @ 2π
25-2000 Hz
60/150 l 2.12/5.3 ft.3
100 mm. 4 in.
9 kg. 19.84 lb.
20.5 N/A
0.106 kg.
21 mm.
9 mm.
28 mm.
388 mm. 15.28 in.
370 mm. 14.56 in.
361 mm. 14.21 in.
355 mm. 13.97 in.
135 mm. 5.31 in.
7 l 0.25 ft.3
10.4 kg. 22.92 lb.
11.5 kg. 25.35 lb.
Cast aluminium
Paper
Plasticised cloth
Copper
Ferrite
27 Hz
6.3 ohms.
9.01
0.27
0.26
345 l
320 µm/N
2.76 kg/s
2.5
0.088 m2
7.5 mm.
660 cm.3
1.2 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
THIELE-SMALL PARAMETERS**
- 11 -
This 12” long excursion bass loudspeaker has been specificall y designed to deliver high impact bass response, with exceptional high power handling
capacity (600w RMS). It incorporates an edgewound ribbon voice coil (4” diameter) and vented magnetic structure. An optimum cooling system
allows a fast heat exchange and contributes to the reduction of thermal power compression.
Modelo de 12” de gran desplazamiento para aplicaciones fundamentalmente de baja y muy baja frecuencia (subgraves). Este altavoz se caracteriza
por una bobina de gran tamaño (4”) con una potencia excepcionalmente alta (600 W RMS) debido a una estudiada refrigeración del bobinado, un
excelente rendimiento y una reducida distorsión armónica.
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=40 I, fb=60 Hz
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
TIME RESPONSE, MAGN.
12LX60
LOW
FREQUENCY
SPECIFICATIONS
300 mm. 12 in.
8 ohms.
600 w RMS
1200 Watts.
96 dB, 2.83v @ 1m @ 2π
35-2000 Hz
20-60 l 0.7/2.24 ft.3
100 mm. 4 in.
9 kg. 19.84 lb.
20.3 N/A
0.090 kg.
23 mm.
8 mm.
40 mm.
320 mm. 12.6 in.
300 mm. 11.8 in.
286 mm. 11.26 in.
280 mm. 11.02 in.
130 mm. 5.1 in.
5.5 l 0.19 ft.3
9.7 kg. 4.4 lb.
10.4 kg. 22.92 lb.
Cast aluminium
Paper
Treated cloth
Edgewound copper wire
Ferrite
42 Hz
5.5 ohms.
9.8
0.31
0.30
66 l
156 µm/N
2.45 kg/s
1.5
0.055 m2
9 mm.
500 cm.3
1,2 mH
-Pro-
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
THIELE-SMALL PARAMETERS**
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, ηo (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
6,5
320
300
228
286
10 117
130
Re + Red(w) CURVE
VOICE COIL INDUCTANCE CURVE
- 12 -
Normalized Amplitude Response (dB/Hz)
- 13 -
12K200
LOW
FREQUENCY
SPECIFICATIONS
300 mm. 12 in.
8 ohms.
250 w RMS
500 Watts.
99 dB, 2.83v @ 1m @ 2π
35-4000 Hz
20/70 l 0.7/2.58 ft.3
77 mm. 3 in.
6.8 kg. 15 lb.
17.7 N/A
0.054 kg.
16 mm.
7 mm.
32 mm.
320 mm. 12.6 in.
300 mm. 11.8 in.
286 mm. 11.26 in.
280 mm. 11.02 in.
137 mm. 5.4 in.
5.5 l 0.19 ft.3
7.8 kg. 17.2 lb.
8.5 kg. 18.74 lb.
Die Cast aluminium
Paper
Plasticised cloth
Copper
Ferrite
35 Hz
6.2 ohms.
11.17
0.229
0.225
160 l
383 µm/N
1 kg/s
2.9
0.053 m2
4.5 mm.
220 cm.3
0.8 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle
normal music program material.
** T-S parameters are measured after an exercise period using a
preconditioning pow er test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker
has been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por
el contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor
laser de velocidad-corriente, y son el reflejo de los parámetros a
largo plazo del altavoz, una vez éste haya sido instalado y haya
trabajado en un corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
THIELE-SMALL PARAMETERS**
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
This 12” cone transducer has been specifically designed to provide powerful and accurate bass frequencies. It features a 3” (77mm) voice coil
diameter, coupled to a powerful magnetic assembl y. Its low distortion characteristics and flat response make it and ideal choice for bass applications
in compact size tuned enclosures.
Este modelo de 12” ha sido diseñado para aplicaciones es de baja frecuencia. Está dotado de una bobina de 3” de diámetro, movida por un sistema
magnético de gran tamaño, con una buena ventilación central y chasis de aluminio fundido a presión. Su baja distorsión y respuesta plana le hacen
muy apropiado para aplicaciones de graves en recintos acústicos de tamaño compacto.
-Pro-
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=50.00 I, fb=60.0 Hz
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
Re + Red(w) CURVE
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
- 14 -
10G200
LOW
FREQUENCY
SPECIFICATIONS
250 mm. 10 in.
8 ohms.
200 w RMS
400 Watts.
96 dB, 2.83v @ 1m @ 2π
40-4000 Hz
20/70 l 0.7/2.5 ft.3
77 mm. 3 in.
5 kg. 11 lb.
16.9 N/A
0.044 kg.
16 mm.
7 mm.
30 mm.
270 mm. 10.62 in.
255 mm. 10.03 in.
240 mm. 9.45 in.
230 mm. 9.05 in.
122 mm. 4.68 in.
3 l 0.10 ft.3
5.7 kg. 12.5 lb.
6 kg. 13.3 lb.
Die Cast aluminium
Paper
Plasticised cloth
Copper
Ferrite
45 Hz
5.8 ohms.
7.021
0.260
0.251
56.1 l
278 µm/N
1.8 kg/s
1.95
0.038 m2
4.5 mm.
171 cm.3
1 mH
NOTES
*The power capacity corresponds to the RMS maximum value that
can dissipate the loudspeaker when a sinus signal is applied for a
period of at least two hours.
Program power is defined as the transducer’s ability to handle normal
music program material.
** T-S parameters are measured after an exercise period using a
preconditioning power test, using a velocity-current laser transducer,
and will reflect the long term parameters, once the loudspeaker has
been working for a short period of time.
NOTAS
*La potencia admisible corresponde a la máxima potencia RMS que
puede disipar el altavoz durante al menos dos horas, cuando se le
aplica una señal senoidal determinada.
Por potencia programa se entiende la capacidad del altavoz en el
manejo de señales transitorias, como sería el proporcionado por el
contenido de un pasaje musical normal.
* *Los parámetros T-S han sido medidos después de un periodo de
fatiga y estabilización de las suspensiones, mediante transductor laser
de velocidad-corriente, y son el reflejo de los parámetros a largo plazo
del altavoz, una vez éste haya sido instalado y haya trabajado en un
corto espacio de tiempo.
Nominal diameter
Rated impedance
Power capacity*
Program Power
Sensitivity
Frequency range
Recom. enclosure vol.
Voice coil diameter
Magnetic assembly weight
BL factor
Moving mass
Voice coil length
Air gap height
X damage (peak to peak)
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
-Front mount
-Rear mount
Depth
Volume displaced by driver
Net weight
Shipping weight
Basket
Cone
Surround
Voice coil
Magnet
Resonant Frequency, fs
D.C. Voice Coil Resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, o (%)
Effective Surface Area, Sd(m2)
Maximum Displacement, Xmax
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1kHz
MOUNTING INFORMATION
MATERIALS
THIELE-SMALL PARAMETERS**
This 10” loudspeaker has been designed to provide powerful and accurate bass frequencies with reduced distortion and power compression. It
features a 3” (77 mm) voice coil coupled to a massive magnet assembly. Its low distortion characteristics and flat response make it an ideal choice
for bass and mid-bass applications in compact size tuned enclosures.
Modelo de 10” diseñado específicamente para la reproducción de forma contundente de las bajas frecuencias, con reducida distorsión armónica
y buena eficiencia. Utiliza una bobina de 3” de diámetro, movida por un potente conjunto magnético. Es un reproductor idóneo para graves y
medios-graves en sistemas compactos de gran potencia.
-Pro-
PREDICTED LOW FREQUENCY RESPONSE • Bass-reflex cabinet, Vb=35.00 I, fb=60.0 Hz
VOICE COIL INDUCTANCE CURVE
TIME RESPONSE, MAGN.
Re + Red(w) CURVE
FREQUENCY RESPONSE & DISTORTION CURVES, MAGN. On axis, 1w @ 1m.
FREQUENCY RESPONSE, PHASE. On axis, 1w @ 1m. FREE AIR IMPEDANCE CURVE
