Contents 3/1 Position switches LS, proximity switches LS, pressure switches MCS Position switches Safety switches Page Moellers safety/position switches are used everywhere where positions must be exactly registered. The LSE-Titan electronic safety/position switch allows the switching point to be set quickly and without complication. Proximity switches in various designs switch reliably and without contact. 3/2 System overview 3/10 Ordering 3/3 Ordering 3/10 Inductive proximity switches 3/15 3/16 3/3 Basic devices 3/12 Operating heads 3/8 Actuators, accessories 3/13 Accessories 3/17 Accessories 3/9 Door flap/hinge-operated switches, position switches 3/14 Pressure switches with main contacts 3/18 3/19 Technical data 3/27 Pressure switches with auxiliary contacts Dimensions 3/35 Accessories 3/20 3/21 3/21 Technical data 3/25 Dimensions 3/33 Positions reliably registered Cage Clamp and screw terminals Metal or insulated Positively opening contacts Simple mounting of the various operating heads Engineering Contact diagrams, changing the active area Technical data Inductive proximity switch Electronic safety position switches LSE-Titan - Switching point simply and variably adjustable - Analogue 0-10 V DC or 4- 20 mA - Cage Clamp Page 3/3 Proximity switches LSI, LSC, LSO - Non-contact, safe switching: inductive, capacitive and optical - Various types of construction Page 3/15 Pressure switches MCSN/MCS - For pressure monitoring of liquids and gases e.g. compressed air. - Two adjustable switching points (ON an OFF switching points) - 1 pole or 3 pole for actuation of control circuits or load switching Page 3/10 Page 3/18 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 3/24 3/24 3/28 3/28 Capacitive proximity switches 3/30 Optical proximity switches 3/31 Pressure switches 3/32 Dimensions - Safety for personnel and processes - Safety and interlocking of protective doors - Safe switch off in emergencies - Prevent tampering 3/15 Complete units Page 3/2 Safety door switches safety position switches Ordering Capacitive and optical proximity switches Contact travel diagrams - Page Page System overview Engineering Safety position switches LS-Titan Proximity switches Pressure switches 3/39 Inductive proximity switches 3/39 Capacitive and optical proximity switches 3/40 Pressure switches 3/41 Position switches LS, proximity witches LS, pressure switches MCS Moeller HPL0211-2007/2008 3/2 System overview Position switches Moeller HPL0211-2007/2008 http://catalog.moeller.net Position switch 1 2 3 4 5 6 7 8 9 10 LS, LSM Basic devices Operating heads Can be rotated by 90 Basic device 1 according to EN 50047 With screw-on cover Contacts: 1NO/1NC, 2NO, 2NC Cage Clamp, screw terminal As snap-action or standard-action switch As electronic snap-action switch,(individually adjustable) As 4-20 mA analog signal encoder As 0-10 V DC analog signal encoder a page 3/3 Fixing adapter Actuation by front element RMQ-Titan Roller lever For one-sided operation with higher operating speed Angled roller lever For actuation along the unit axis Rotary lever For actuation from the side, for pendulum movements a page 3/6 LS, LSM product features * Modular system * IP65 and IP66 degree of protection * (except LSM) Notes Operating heads Can be rotated by 90 2 3 4 5 * Personnel protection * Positive operation * f Safety function by positive opening according to IEC/EN 60947-5-1 Up to category 4 according to EN 954-1 Roller plunger For actuation from the side with low actuating force Adjustable roller lever For length adjustment as required Actuating rod On conveyor belts for lightweight goods Spring-rod For flexible actuation from all sides Actuating rod Withdrawable mechanism from front a page 3/6 6 7 8 9 10 * Suitable for use with electronic devices to IEC/ EN 61131-2 * Devices for world markets Do not use as a mechanical stop/shipping brace. Cage Clamp is a registered trademark of Wago Kontakttechnik, 32423 Minden, Germany. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Complete units http://catalog.moeller.net LSE Moeller HPL0211-2007/2008 Contacts N/O = Normally open N/C = Normally closed f = positive opening safety function to IEC/EN 60947-5-1 Contact sequence Contact travel Colour of enclosure cover U = contact closed u = contact open = setting range Insulated material Part no. Article no. Price see price list Std. pack N/C = Normally closed Position switch N/O = Normally open 3/3 IP66, IP67 operating point electronically adjustable Basic unit Visible status display, comparable with positive opening function Conditional short-circuit, restart after reset Bauart gepruft Functional TUV Rheinland Safety Type approved 1 N/O 1 N/C 0 0.5 +Ue 5.5 6.1 LSE-11 266121 1 5.5 6.1 LSE-02 266122 1 off Q1 Q2 electron. Q1 default=3.0 Q2 0V 2 N/C 0 0.5 +Ue Q1 Q2 electron. Q1 default=3.0 Q2 0V Notes LSE-11 and LSE-02: Individual operating point adjustment: adjust fix 1s LED Set Set F circuit example for series connection: LSE-11 and LSE-02 can be used in safety circuits + 24 V LSE-11 LSE-11 +Ue S1 LSE-11 +Ue S2 Q1 Q1 Q2 Q2 0V LS-.. +Ue S3 S4 Q1 Q2 0V 0V R1 R2 K1 0V S1 is connected to 24 V DC S2, S3 each switch with a delay of 0.7 s R1, R2 e.g. series element M22-XLED60 (2820 O/0.5 W) Analog electronic position switches IP66, IP67 Basic unit Visual status indication Q1 = analog output Q2 = diagnostics output (the diagnostics output has a 0 V signal in the event of a fault.) 4 - 20 mA I [mA] 20 4 1 off LSE-AU 274096 1 off S [%] 0 0 - 10 V LSE-AI 269461 100 U [V] 10 S [%] 0 100 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 3/4 Ordering Complete units LS, LSM Auxiliary contacts: f = safety function, by positive opening to IEC/EN 60947-5-1 Position switch N/O = Normally open Moeller HPL0211-2007/2008 Contact sequence Contact travel U = contact closed u = contact open N/C = Normally closed Colour of enclosure cover http://catalog.moeller.net Housing Terminal connection Part no. Article no. Price see price list Insulated material Insulated material Metal Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp LS-02/F 292365 LS-S02/F 106780 LSM-02/F 292371 LS-11/F 290176 LS-S11/F 106784 LSM-11/F 292372 LS-11D/F 292366 LS-S11D/F 106792 LSM-11D/F 292373 LS-11DA/F 292369 LS-S11DA/F 106796 LSM-11DA/F 292376 LS-11S/F 292367 LS-S11S/F 106799 LSM-11S/F 292374 LS-20/F 292368 LS-S20/F 106809 LSM-20/F 292375 1 off Insulated material Insulated material Metal Cage Clamp Screw terminal Cage Clamp LS-20A/F 292370 LS-S20A/F 106811 LSM-20A/F 292377 1 off Insulated material Insulated material Insulated material Insulated material Metal Cage Clamp Cage Clamp Screw terminal Screw terminal Cage Clamp LS-02 266107 LS-02-SW 272009 LS-S02 106729 LS-S02-SW 106782 LSM-02 266142 10 off Std. pack Rounded plunger, IP66, IP67 Basic unit Front fixing, non expandable 2 N/C f 2 N/C f 11 12 0 21 22 3.0 6.1 11-12 NC 21-22 NC 3.0 Zw = 4.5 mm 2 N/C f 1 N/O 1 N/O 1 N/C f 1 N/C f 13 14 0 21 22 4.3 6.1 13-14 NO 21-22 NC 3.0 Zw = 4.5 mm 1 N/O 1 N/C f 1 N/O 1 N/C f 27 28 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 27 3.0 6.1 NC 27-28 NO 15 16 0 4.0 6.1 15-16 NC 27-28 NO 2.1 ZW = 5.5 mm 13 14 21 Snap-action contact 22 0 3.0 6.1 21-22 13-14 21-22 13-14 1 N/C f 2 N/O 0 15-16 2.1 Zw = 4.5 mm 28 1 N/O 15 16 1.6 Zw = 5.5 mm 13 23 14 24 0 4.3 6.1 13-14 NO 23-24 NO 2 N/O 2.1 2 N/O 2 N/O 13 23 14 24 0 2.1 6.1 13-14 NO 23-24 NO 2 N/O 2.1 ZW = 4.5 mm 2 N/O Expandable with operating heads 2 N/C f 2 N/C f 2 N/C f 2 N/C f 2 N/C f Notes 11 12 0 21 22 3.0 6.1 11-12 NC 21-22 NC 3.0 Zw = 4.5 mm Insulated material Insulated material Metal Insulated material Insulated material Metal Insulated material Insulated material Metal Insulated material Insulated material Metal Insulated material Insulated material Metal 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 1 off 10 off 10 off 10 off 2 off Cage Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Complete units http://catalog.moeller.net LS, LSM Moeller HPL0211-2007/2008 Auxiliary contacts: f = safety function, by positive opening to IEC/EN 60947-5-1 Contact sequence Contact travel U = contact closed u = contact open Colour of enclosure cover Housing Terminal connection Part no. Article no. Price see price list Insulated material EN 50047 Form B Cage Clamp Cage Clamp Screw terminal Screw terminal Cage Clamp LS-11 266109 LS-11-SW 272006 LS-S11 106783 LS-S11-SW 106807 LSM-11 266144 10 off Cage Clamp Cage Clamp Screw terminal Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp Cage Clamp Cage Clamp Screw terminal Screw terminal Cage Clamp LS-11D 266114 LS-11D-SW 272007 LS-S11D 106791 LS-S11D-SW 106797 LSM-11D 266149 LS-11DA 292361 LS-S11DA 106795 LSM-11DA 292363 LS-11S 266105 LS-11S-SW 272020 LS-S11S 106798 LS-S11S-SW 106806 LSM-11S 266140 10 off Cage Clamp Cage Clamp Screw terminal Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp LS-20 266120 LS-20-SW 272008 LS-S20 106808 LS-S20-SW 106812 LSM-20 266155 LS-20A 292362 LS-S20A 106810 LSM-20A 100051 10 off Std. pack N/C = Normally closed Rounded plunger, IP66, IP67 Basic unit Expandable with operating heads 1 N/O 1 N/C f 1 N/O 1 N/C f 13 14 0 21 22 4.3 6.1 13-14 NO 21-22 NC 3.0 Zw = 4.5 mm 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 15 16 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 27 28 0 3.0 NC 27-28 NO 2.1 Zw = 4.5 mm 13 14 21 22 0 4.0 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 2 N/O 6.1 15-16 NC 27-28 NO 2.1 ZW = 5.5 mm 13 21 Snap-action contact 0 1 N/O 6.1 15-16 14 22 3.0 6.1 21-22 13-14 21-22 13-14 13 14 0 23 24 4.3 6.1 13-14 NO 23-24 NO 2.1 2 N/O 2 N/O 2 N/O 13 14 2 N/O 2 N/O Notes Insulated material Insulated material Metal Insulated material EN 50047 Form B 1.6 Zw = 5.5 mm 2 N/O 2 N/O Metal EN 50047 Form B Insulated material Insulated material Insulated material Insulated material Metal 23 24 0 2.1 6.1 13-14 NO 23-24 NO 2.1 ZW = 4.5 mm Metal EN 50047 Form B Insulated material Insulated material Insulated material Insulated material Metal Insulated material Insulated material Metal 10 off 10 off 10 off 2 off 10 off 10 off 10 off 2 off 1 off 1 off 1 off 10 off 10 off 10 off 10 off 2 off 10 off 10 off 10 off 2 off 1 off 1 off 2 off Cage Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Position switch N/O = Normally open 3/5 3/6 Ordering Complete units LS, LSM Auxiliary contacts: f = safety function, by positive opening to IEC/EN 60947-5-1 Moeller HPL0211-2007/2008 Contact sequence Contact travel U = contact closed u = contact open Position switch N/O = Normally open Colour of enclosure cover http://catalog.moeller.net Terminal connection Part no. Article no. Insulated material Insulated material Metal Cage Clamp Screw terminal Cage Clamp LS-11S/S 266104 LS-S11S/S 106805 LSM-11S/S 266139 2 off Insulated material EN 50047 Form C Cage Clamp Screw terminal Cage Clamp LS-11/P 266112 LS-S11/P 106788 LSM-11/P 266147 2 off Cage Clamp Screw terminal Cage Clamp LS-11S/P 266118 LS-S11S/P 106801 LSM-11S/P 266153 2 off Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp LS-11/RLA 266113 LS-S11/RLA 106790 LSM-11/RLA 266148 LS-11S/RLA 266119 LS-S11S/RLA 106803 LSM-11S/RLA 266154 2 off Cage Clamp Screw terminal Cage Clamp LS-11S/RR 266106 LS-S11S/RR 106804 LSM-11S/RR 266141 4 off Housing Price see price list Std. pack N/C = Normally closed Spring-rod actuator IP66, IP67 Do not use spring-rod actuator as a safety position switch; admissible only with snap-action contact. 1 N/O 1 N/C f 13 21 Snap-action contact 0 14 1 N/O 1 N/O 22 1 N/C f 26 13 21-22 13-14 21-22 13-14 7 Zw = 19 1 N/C f 2 off 2 off Roller plungers, IP66, IP67 EN 50047 Form C 1 N/O 1 N/O 1 N/C f 1 N/C f 13 0 21 4.3 6.1 13-14 14 22 NO 21-22 NC 3.0 Zw = 4.5 mm 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/O 1 N/C f 13 14 21 Snap-action contact 22 0 6.1 3.0 21-22 13-14 1 N/C f Metal EN 50047 Form C 21-22 13-14 1.6 Zw = 5.5 mm Adjustable roller levers, IP66, IP67 1 N/O 1 N/C f 13 14 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O IP66, IP67 actuating rod 1 N/O NO NC 32 Snap-action contact 0 1 N/O Notes 1 N/C f 30 65 21-22 13-14 21-22 13-14 15 Zw = 60 13 14 1 N/C f 65 21-22 21 Snap-action contact 0 1 N/O 46 13-14 Zw = 48 1 N/C f 1 N/C f 0 21 22 22 21-22 13-14 21-22 13-14 15 Zw = 60 Metal EN 50047 Form C Insulated material EN 50047 Form C 30 65 Insulated material Insulated material Metal Insulated material Insulated material Metal Insulated material Insulated material Metal 2 off 2 off 2 off 2 off 2 off 2 off 2 off 2 off 2 off 4 off 4 off Cage Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Complete units LS, LSM Moeller HPL0211-2007/2008 Auxiliary contacts: f = safety function, by positive opening to IEC/EN 60947-5-1 Contact sequence Contact travel U = contact closed u = contact open N/O = Normally open N/C = Normally closed Colour of enclosure cover Housing Terminal connection Part no. Article no. Price see price list Insulated material Insulated material Metal Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal LS-02/L 266108 LS-S02/L 106781 LSM-02/L 266143 LS-11/L 266110 LS-S11/L 106785 2 off Metal EN 50047 Form E Cage Clamp LSM-11/L 266145 2 off Insulated material Insulated material Metal Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal LS-11D/L 266115 LS-S11D/L 106793 LSM-11D/L 266150 LS-11S/L 266116 LS-S11S/L 106800 2 off Metal EN 50047 Form E Cage Clamp LSM-11S/L 266151 2 off Insulated material Insulated material Insulated material Insulated material Cage Clamp Screw terminal Cage Clamp Screw terminal LS-11/LS 290173 LS-S11/LS 106787 LS-11D/LS 290174 LS-S11D/LS 106794 1 off Insulated material Insulated material Cage Clamp Screw terminal LS-11/LB 290175 LS-S11/LB 106786 1 off Insulated material Insulated material Metal Cage Clamp Screw terminal Cage Clamp Cage Clamp Screw terminal Cage Clamp LS-11/RL 266111 LS-S11/RL 106789 LSM-11/RL 266146 LS-11S/RL 266117 LS-S11S/RL 106802 LSM-11S/RL 266152 2 off LS-COMBINATION-* 266168 1 off Std. pack Roller lever IP66, IP67 Long 2 N/C f 11 12 2 N/C f 0 21 22 4.4 9.6 11-12 NC 21-22 NC 4.4 Zw = 6.9 mm 2 N/C f 1 N/O 1 N/C f 13 14 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 6.5 NO 21-22 NC 4.7 27 0 15 16 4.7 NC 27-28 NO 13 21 Snap-action contact 0 22 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f 9.6 15-16 3.3 Zw = 7.7 mm 14 1 N/O Insulated material EN 50047 Form E 9.6 13-14 Zw = 7.1 mm 28 1 N/O 0 21 22 Insulated material EN 50047 Form E 9.6 4.4 21-22 13-14 21-22 13-14 2.3 Zw = 8.7 mm 2 off 2 off 2 off 2 off 2 off 2 off 2 off 2 off Short 13 14 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/C f Roller lever, large 1 N/O 1 N/C f 27 Rotary lever, IP66, IP67 1 N/O NO NC 0 15 16 13 NC NO 0 21 22 13 14 1 N/O 1 N/C f 1 N/O 1 N/C f 13.4 NO 21-22 NC 0 21 22 46 65 13-14 NO 21-22 NC 32 13 21 Snap-action contact 0 1 N/O 9.1 13-14 Zw = 48 14 1 N/O 6.9 27-28 6.3 Zw = 9.6 mm 1 N/C f 1 N/C f 3.3 15-16 1 N/C f 1 N/O 6.9 21-22 2.2 Zw = 5.0 mm 14 1 N/O 4.7 13-14 3.3 Zw = 5.0 mm 28 1 N/O 0 21 22 22 1 N/C f 30 Insulated material Insulated material Metal 65 21-22 13-14 21-22 13-14 15 Zw = 60 1 N/C f 1 off 1 off 1 off 1 off 2 off 2 off 2 off 2 off 2 off Customer specific complete device IP66, IP67 (*) user-definable customer ID or warehouse No.; up to 10 characters - Notes - - Insulated material Cage Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Position switch http://catalog.moeller.net 3/7 3/8 Ordering Operating heads LS, LSM Moeller HPL0211-2007/2008 Insulated material Part no. Article no. Metal Part no. Article no. LS-XP 266125 http://catalog.moeller.net Std. pack Notes LSM-XP 266158 10 off The operating heads can be rotated in 90 stages to match the specified direction of operation. LS-XL 266123 LS-XLS 290177 LS-XLB 290178 LSM-XL 266156 10 off LS-XLA 266124 LSM-XLA 266157 10 off LS-XRL 266126 LSM-XRL 266159 5 off LS-XRLA 266127 LS-XRLA30 266128 LS-XRLA40 266129 LS-XRLA40R 266130 LSM-XRLA 266160 4 off LS-XRR 266131 LS-XRRM 266132 LSM-XRR 266161 LSM-XRRM 266162 4 off LS-XS 266133 LSM-XS 266163 5 off Position switch Operating heads Roller plungers Roller lever Long Short Large 1 off Angled roller lever Rotary lever Adjustable roller levers D = 18 mm D = 30 mm D = 40 mm D = 40 mm (rubber) Actuating rods Plastic rod Metal rod 4 off Spring-rod Not to be used as a safety position switch Use only in conjunction with snap-actioncontact. Actuating rod LS-XOR 290190 1 off M22-LS 266137 10 off Fixing adapter Actuation through RMQ-Titan(R) front elements For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Accessories http://catalog.moeller.net 3/9 Moeller HPL0211-2007/2008 For use with Description Part no. Article no. for use with american pipe thread, metal for use with american pipe thread, moulded material Price see price list Std. pack Notes V1/2"/M20-NA 225269 10 off The screw connection must be earthed, not total insulation V1/2"/M20 225270 10 off EMS20 225271 25 off LS-X20 266134 25 off M12A 266135 10 off M20 1/2" M20 diaphragm bolt, IP65 With integral push-through membrane External diameter of cable up to 13 mm IP65 with cable inserted M20 screw closure (self-sealing grommet) For tightening / loosening by using a standard wrench for sealing grommet plugs Plug connector, M12 x 1, IP65 Moulded Ui = 250 V, Ith = 4 A Fuse: 6 A gG/gL 4-pole Ue = 250 V LS A" coded Standard in IEC/EN 60947-5-2 M12A, M12B 1 1 1 2 2 2 3 3 3 4 4 4 4 4 3 1 A B 2 3 1 2 ..-11-.. ..-20-.. ..-02-.. LS "B" coded M12B 266136 10 off LSM "A" coded M12A5 272202 10 off 5-pole Ue = 125 V Standard in IEC/EN 60947-5-2 M12A5, M12B5 1 1 1 2 2 2 3 3 3 4 4 4 4 4 3 1 A 2 3 1 B 2 ..-11-.. ..-20-.. ..-02-.. LSM "B" coded M12B5 272203 10 off LS-XTW 290179 1 off Cage Clamp twin N/C contact For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Position switch M20 screw terminal M20 in m" 3/10 System overview Safety components Moeller HPL0211-2007/2008 http://catalog.moeller.net LS-...ZBZ Safety switches 1 7 6 5 5 4 3 2 LS-...ZB 1 2 LSR-...TKG LSR-...TS 1 1 LS4...ZB 1 2 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 System overview Safety components http://catalog.moeller.net 3/11 Moeller HPL0211-2007/2008 LS-...ZBZ 1 Angled flexible actuator For doors that do not close precisely 3 6 a page 3/13 Tamper-proof Multiple coded actuators Contacts: 1 NO/1 NC or 2 NC a page 3/13 Flat actuator For sliding doors 4 Angled compensating actuator For increased tolerance compensation in the direction of door closure a page 3/12 a page 3/13 Flat flexible actuator For doors that do not close precisely Flat compensating actuator For increased tolerance compensation in the direction of door closure 2 7 a page 3/13 Angled actuator For swing doors 5 a page 3/13 a page 3/13 LS-...ZB Complete device For personnel protection Contacts: 1 NC, 1 NO/1 NO or 2 NC 5 directions of operation possible 1 Actuator Multiple coding protection against tampering 2 a page 3/14 LSR-...TKG, LSR-...TS Complete device For personnel protection Contacts: 1 NO/1 NC or 2 NC For swing doors with fixed connection to the door/hinge pin LSR-...TKG a page 3/14 LSR-...TS a page 3/14 LS4.../ZB 1 Complete device Narrow enclosure version For personnel protection Contacts: 1NO, 1NO/1NC 1 Actuator Multiple coding For horizontal or vertical operation 2 a page 3/14 Product features * Interlocking device to EN 1088 * Degree of protection IP65 * For use in safety circuits * Operatining head can be rotated 4 x 90 * With M20 x 1.5 thread * f Safety function by positive opening according to IEC/EN 60947-5-1 Notes Do not use as a mechanical stop/shipping brace. Attention! Any change to an original Moeller safety position switch is not permitted and automatically leads to the loss of all approvals For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Safety switches Basic device Spring or magnet-powered interlock For increased personnel and process protection 3/12 Ordering Position switches LS...ZBZ Moeller HPL0211-2007/2008 Auxiliary contacts: f = safety function, by positive opening to IEC/EN 60947-5-1 N/O = Normally open Contact sequence Rated control voltage for magnetic drive Part no. Article no. http://catalog.moeller.net Price see price list Std. pack Us N/C = Normally closed Safety switches V Basic units with spring-powered interlock (closed-circuit principle), IP651) * With interlock monitoring and auxiliary release mechanism * Monitoring of door position: continuous 13 21 1 N/O 1 N/C f 24 V DC A1 A2 14 2 N/C f 11 1 N/C f 13 11 1 N/C f 13 A1 A2 11 LS-S02-24DFT-ZBZ/X 106823 21 120 V 50/60 Hz LS-S11-120AFT-ZBZ/X 106825 21 120 V 50/60 Hz LS-S02-120AFT-ZBZ/X 106778 230 V 50/60 Hz LS-S11-230AFT-ZBZ/X 106827 230 V 50/60 Hz LS-S02-230AFT-ZBZ/X 106821 22 A1 A2 14 2 N/C f 24 V DC 22 12 1 N/O 21 22 A1 A2 14 2 N/C f 21 22 A1 A2 12 21 22 Basic units with magnet-powered interlock (open-circuit principle), IP652) * With interlock monitoring * Monitoring of door position: continuous 13 21 1 N/O 1 N/C f 24 V DC A1 A2 14 2 N/C f 11 1 N/C f 13 11 1 N/C f 13 A1 A2 11 12 Notes 1) Time 2) Time 24 V DC LS-S02-24DMT-ZBZ/X 106824 21 120 V 50/60 Hz LS-S11-120AMT-ZBZ/X 106826 21 120 V 50/60 Hz LS-S02-120AMT-ZBZ/X 106820 230 V 50/60 Hz LS-S11-230AMT-ZBZ/X 106828 230 V 50/60 Hz LS-S02-230AMT-ZBZ/X 106822 22 A1 A2 14 2 N/C f 21 22 12 1 N/O 1 off 22 A1 A2 14 2 N/C f LS-S11-24DMT-ZBZ/X 106830 22 A1 A2 12 1 N/O 1 off 22 A1 A2 12 1 N/O LS-S11-24DFT-ZBZ/X 106829 21 22 A1 A2 21 22 control of the release operation possible using ESR4-NT30-30 control of the release operation possible using ESR4-NV30-30 1) Electric circuitry with DIL contactors and ESR4 safety relays Safety manual TB0-009, order no. 082309 With the actuator inserted, the NO contact is open and the NC contact is closed. The operating head can be rotated manually in 90 steps to suit the specified level of actuation. In the event of a loss of voltage, (e.g. during commissioning), the springpowered LS-...-...FT-ZBZ can be released with a screwdriver. The auxiliary release mechanism must be sealed! Care should be taken during mounting and operation that no foreign bodies enter the actuator's entry aperture. Switch must never be used as a mechanical stop! For degree of protection IP65, use V-M20 cable glands with connecting thread of max. 9 mm length Accessories Page V-M20 cable gland a 13/35 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Actuators, accessories http://catalog.moeller.net 3/13 LS...ZBZ Moeller HPL0211-2007/2008 Part no. Article no. Price see price list Std. pack Stainless steel For combination with LS-...ZBZ/X basic devices Flat actuator For sliding doors LS-XG-ZBZ 106833 1 off LS-XW-ZBZ 106839 LS-XWA-ZBZ 106838 1 off LS-XF-ZBZ 106832 1 off LS-XFG-ZBZ 106831 1 off LS-XNG-ZBZ 106834 1 off LS-XNW-ZBZ 106835 1 off LS-XSK-ZBZ 106837 1 off Angled actuator For swing doors from 250 mm width short long 1 off Angled, flexible actuator For doors that do not close precisely even, flexible coasting actuator For doors that do not close precisely Flat, compensating actuator with increased tolerance in closing direction for inaccurately closing doors Angled, compensating actuator with increased tolerance in closing direction for inaccurately closing doors Accessories - Dust protection cap Prevents ingress of foreign matter into the device head For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Safety switches Actuators 3/14 Ordering Door flap/hinge-operated switches, position switches LSR, LS...ZB Auxiliary contacts: f = safety function, by positive opening to IEC/EN 60947-5-1 Safety switches N/O = Normally open Moeller HPL0211-2007/2008 Contact sequence N/C = Normally closed Safety door flap switch LSR-.../TKG. IP65 2 N/C f 11 12 Contact sequence U = Contact closed u = Contact open Zw = Positive opening sequence 21 22 0 5 5 21 - 22 Approval http://catalog.moeller.net Connection type Part no. Article no. Price see price list Screw terminal LSR-S02-1-I/TKG 106848 1 off Screw terminal LSR-S11-1-I/TKG 106847 1 off Screw terminal LSR-S02-1-I/TS 106852 1 off Screw terminal LSR-S11-1-I/TS 106851 1 off Cage Clamp Screw terminal Cage Clamp Screw terminal Cage Clamp Screw terminal LS-02-ZB 106817 LS-S02-ZB 106874 LS-11-ZB 106819 LS-S11-ZB 106876 LS-11S-ZB 106870 LS-S11S-ZB 106877 2 off Screw terminal LS4/S01-1/I/ZB 106855 1 off Screw terminal LS4/S11-1/I/ZB 106857 1 off Std. pack 11 - 12 90 Zw = 10 1 N/O 1 N/C f 13 14 21 22 90 0 5 5 21 - 22 13 - 14 90 17 Zw = 10 Hinge-operated safety switch LSR-.../TS, IP65 2 N/C f 11 12 21 22 17 90 0 5 5 21 - 22 11 - 12 180 Zw = 10 1 N/O 1 N/C f 13 14 21 22 180 0 5 5 21 - 22 13 - 14 180 17 Zw = 10 17 180 Safety position switches LS...-ZB, IP65 With the actuator inserted, the NO contact is open and the NC contact is closed. 11 21 2 N/C f - 2 N/C f 12 22 - 1 N/O 1 N/C f 1 N/O 1 N/C f 1 N/O 1 N/C f Snap-action contact 1 N/O 1 N/C f Snap-action contact 13 14 21 22 - - 1 off 2 off 1 off 2 off 1 off safety/ position switch LS4.../ZB, IP65 With the actuator inserted, the NO contact is open and the NC contact is closed. 21 1 N/C f - 22 1 N/O 1 N/C f 13 14 Notes 21 22 - Cage Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. Electric circuitry with DIL contactors and ESR4 safety relays a Safety manual TB0-009, order no. 082309 Actuator can be repositioned for horizontal or vertical Electric circuitry with DIL contactors and installation. The operating heads can be rotated manually ESR4 safety relays Safety manual TB0-009, in 90 steps to suit the specified direction of operation. order no. 082309 Note: Care should be taken during mounting and operation that no foreign bodies enter the actuator's entry aperture. With the actuator inserted, the NO contact is open and the NC contact is closed. With the actuator inserted, the NO contact is open and the NC contact is closed. For degree of protection IP65, use V-M20 cable glands with max 9 mm long thread. Accessories Page V-M20 cable gland a 13/35 Contact sequences a Electronic Catalogue For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Inductive proximity switches Contacts N/O = normally open contact, C/O = changeover contact, P = programmable as N/C or N/O LSI Moeller HPL0211-2007/2008 Rated switching distance Rated operating voltage Sn mm Ue V DC mm 10 - 30 M8 x 1 DC version, pulse-switching (PNP) S 1.5 Style Housing Terminal connection Fitting in metal Part no. Article no. Metal 2 m connection cable Plug-in connection M12 x 1 Plug-in connection M12 x 1 Flush LSI-R8S-F1-LD 281962 LSI-R8S-F1-PD 281963 LSI-R8S-NF3-PD 281964 S 1.5 Metal S 3 Metal S 2 S 4 S 2 Insulated material Insulated material Metal S 2 Metal S 4 Metal S 5 S 8 S 5 Insulated material Insulated material Metal S 5 Metal S 8 Metal S 10 S 15 S 10 Insulated material Insulated material Metal S 10 Metal S 15 Metal W 20 10 - 65 W 40 10 - 65 S 20 10 - 30 S 35 10 - 30 AC voltage version 50/60 Hz V AC S 2 M12 x 1 M18 x 1 M30 x 1.5 Flush Non-flush 2 m connection cable 2 m connection cable 2 m connection cable Plug-in connection M12 x 1 Plug-in connection M12 x 1 Flush 2 m connection cable 2 m connection cable 2 m connection cable Plug-in connection M12 x 1 Plug-in connection M12 x 1 Flush 2 m connection cable 2 m connection cable 2 m connection cable Plug-in connection M12 x 1 Plug-in connection M12 x 1 Flush Non-flush Flush Flush Non-flush Non-flush Flush Flush Non-flush Non-flush Flush Flush Non-flush 114 x 40 x 40 114 x 40 x 40 Insulated material Insulated material Screw terminal Flush Screw terminal Non-flush 65 x 40 x 40 65 x 40 x 40 Insulated material Insulated material Plug-in connection M12 x 1 Plug-in connection M12 x 1 Flush 20 - 250 M12 x 1 Insulated material Insulated material Insulated material Insulated material Insulated material 2 m connection cable 2 m connection cable 2 m connection cable Screw terminal Flush Flush Screw terminal Non-flush S 5 20 - 250 M18 x 1 S 10 20 - 250 M30 x 1.5 P 20 20 - 250 P 35 20 - 250 114 x 40 x 40 114 x 40 x 40 Non-flush Flush Flush Price see price list Std. pack 1 off LSI-R12P-F2-LD 281908 LSI-R12P-NF4-LD 281909 LSI-R12M-F2-LD 281904 LSI-R12M-F2-PD 281905 LSI-R12M-NF4-PD 281906 LSI-R18P-F5-LD 281954 LSI-R18P-NF8-LD 281955 LSI-R18M-F5-LD 281950 LSI-R18M-F5-PD 281951 LSI-R18M-NF8-PD 281952 LSI-R30P-F10-LD 281960 LSI-R30P-NF15-LD 281961 LSI-R30M-F10-LD 281956 LSI-R30M-F10-PD 281957 LSI-R30M-NF15-PD 281958 LSI-Q40P-F20-CD 281998 LSI-Q40P-NF40-CD 282002 LSI-Q40P-F20-PD 281999 LSI-Q40P-NF35-PD 282001 LSI-R12P-F2-LA 281907 LSI-R18P-F5-LA 281953 LSI-R30P-F10-LA 281959 LSI-Q40P-F20-CA 281997 LSI-Q40P-NF35-CA 282000 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Proximity switches http://catalog.moeller.net 3/15 3/16 Ordering Capacitive and optic proximity switches LSC, LSO Moeller HPL0211-2007/2008 Contacts Rated switching distance Sn mm Rated operating voltage Ue V DC Style 3 10 - 30 M12 x 1 N/O 5 10 - 65 M18 x 1 C 10 10 - 65 M30 x 1.5 N/O 5 10 - 30 32 x 20 x 8 C 20 10 - 65 114 x 40 x 40 Proximity switches N/O = normally open contact, C/O = changeover contact, P = programmable as N/C or N/O http://catalog.moeller.net Housing Connection type Part no. Article no. Metal 2 m connection cable LSC-R12M-F3-LD 282005 LSC-R18M-F5-LD 282006 LSC-R30M-F10-LD 282007 LSC-Q20M-F5-LD 282003 Insulated material Screw terminal LSC-Q40P-F20-CD 282004 Price see price list Std. pack mm LSC Capacitive proximity switches Rated operational current Iemax. 200 mA Fitting in metal: flush N/O Operating range Style 1 off Housing Terminal connection Part no. Article no. Price see price list 2 m connection cable LSO-R18P-S300-LD 281987 LSO-R18P-S300-PD 281988 LSO-R18S-S300-LD 281991 LSO-R18S-S300-PD 281992 LSO-R30P-S400-LD 281995 LSO-R30P-S400-PD 281996 1 off LSO-R18P-B2000-LD 281985 LSO-R18P-B2000-PD 281986 LSO-R18S-B2000-LD 281989 LSO-R18S-B2000-PD 281990 LSO-R30P-B6000-LD 281993 LSO-R30P-B6000-PD 281994 1 off Std. pack Sd mm mm LSO Optical proximity switches Rated operating voltage Ue 10 - 30 V DC Rated operational current Iemax. 150 mA Output function M/B, programmable Reflected-light beam With background suppression 300 M18 x 1 300 M18 x 1 300 M18 x 1 Insulated material Insulated material Metal 300 M18 x 1 Metal 400 M30 x 1.5 400 M30 x 1.5 Insulated material Insulated material Reflected-light barrier For combination with light-barrier reflector R...-ATL 2000 M18 x 1 2000 M18 x 1 2000 M18 x 1 Insulated material Insulated material Metal 2000 M18 x 1 Metal With polarisation filter 6000 M30 x 1.5 With polarisation filter 6000 M30 x 1.5 Insulated material Insulated material Plug-in connection M12 x 1 2 m connection cable Plug-in connection M12 x 1 2 m connection cable Plug-in connection M12 x 1 2 m connection cable Plug-in connection M12 x 1 2 m connection cable Plug-in connection M12 x 1 2 m connection cable Plug-in connection M12 x 1 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Accessories LSO, LSI Moeller HPL0211-2007/2008 Part no. Article no. Light-barrier reflectors For combination with reflected-light barrier Diameter: 40 mm Diameter: 75 mm Length Style input side Style output side Rated operating voltage Price see price list Std. pack LSO-XR40 281983 1 off LSO-XR75 281984 1 off LED display Part no. Article no. LSI-X3M-CAPS1-D4Y 281967 LSI-X3M-CA2-D4Y 281965 LSI-X3M-CA5-D4Y 281966 Price see price list Std. pack Ue V m Accessories: Plug and coupling, M12, "A" coded 3-pole 1 Plug, straight 10 - 30 K 2 Cable end open 10 - 30 K 5 Cable end open 10 - 30 K Plug, straight F 250 1 4-pole Coupling, angled Coupling, straight 1.5 F 250 2 F 250 5 F 250 1 Coupling, angled Plug, straight 10 - 30 1 Coupling, straight Plug, straight F 250 1.5 F 250 2 Coupling, angled Cable end open F 250 2 Coupling, straight Cable end open F 250 2 Coupling, straight Plug, straight F 250 5 F 250 Plug, angled Free F 250 Plug, straight F 250 Coupling, angled F 250 Coupling, straight F 250 1 off LSI-X3M-CSPS1-A4N 281969 LSI-X3M-CSPS1,5-A4N 281968 LSI-X3M-CSPS2-A4N 281970 LSI-X3M-CSPS5-A4N 281971 K LSI-X4M-CAPS1-D4Y 281974 LSI-X4M-CSPS1-A4N 281976 LSI-X4M-CSPS1,5-A4N 281975 1 off LSI-X4M-CA2-A4N 281972 LSI-X4M-CS2-A4N 281973 LSI-X4M-CSPS2-A4N 281977 LSI-X4M-CSPS5-A4N 281978 LSI-X4M-PAF-A4N 281979 LSI-X4M-PSF-A4N 281980 LSI-X4P-CAF-A4N 281981 LSI-X4P-CSF-A4N 281982 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Proximity switches http://catalog.moeller.net 3/17 3/18 Ordering Pressure switches with main contacts MCSN Cut-in pressure and cut-out pressure: separate stepless adjustment. All the intersection points within the diagram area can be set. Max. operating pressure Part no. Article no. Price see price list Std. pack Notes 1 off Features: * With terminal cover as standard * 1 insulated earth terminal e * One insulated N terminal * Two cable entry knockouts for M20, without cable gland * IP65 in conjunction with VM20 cable gland * Pressure pipe flange R m" * when requested: pressure pipe flange R k" * Neoprene diaphragm bar Pressure switches with main contacts IP65, 3 pole bar 4,5 4 3 1 5 P 3,8 2 4 6 P min 3 2 1 0,3 Variable switching differential 7 MCSN4 057679 With release valve for 6 mm Ermeto coupling 7 MCSN4-V 062425 2,7 0 0 3 2 1 0,9 4 4,5 bar P max Min. switching differential: 0.6 bar Example: Cut-out pressure 3.3 bar Cut-in pressure 2.2 bar bar 11 10 3 1 R k" corresponds to G k R m" corresponds to G m to ISO 228-1 5 9,4 P 2 4 6 Variable switching differential 15 MCSN11 029203 8 P min 6,0 N With release valve for 6 mm Ermeto coupling 4 2 0,5 For use as motor switch to IEC/EN 60947-4-1 for: AC-3 6 0 6 4 2 0 1,9 5,1 8 15 MCSN11-V 033949 3 5 2 4 6 P> M 3 P max 1 3 bar Single-phase current Min. switching differential: 1.4 bar Example: Cut-out pressure 8.5 bar Cut-in pressure 4.5 bar bar 16 14 1 10 11 N P Variable switching differential 25 P min 8.0 6 4 2 0 0 2 6 4 6 With release valve for 6 mm Ermeto coupling 25 M 1 10 0.7 2 4 MCSN16 038695 12 8 5 P> 13.1 2 4 6 3 1 5 DC-3 MCSN16-V 043441 N 3 1 5 P> 2 4 6 8 10 12 14 16 3.1 7.5 M _ bar P max Min. switching differential: 2.4 bar Example: Cut-out pressure 14.5 bar Cut-in pressure 7.5 bar bar 22 20 18 16 14 12 10 8 6 4 2 0,9 0 1 3 For use as control switch: 1 18,5 2 4 6 3 5 2 4 6 N P> 5 P Variable switching differential 25 MCSN22 048187 K 11,0 P min Pressure switches http://catalog.moeller.net Moeller HPL0211-2007/2008 With release valve for 6 mm Ermeto coupling 25 MCSN22-V 052933 H Cut-in and cut-out pressures are factory-preset as specified with type suffix. 0 2 4 6 8 10 12 14 16 18 20 22 3,9 9,1 bar P max Min. switching differential: 3.0 bar Example: Cut-out pressure 17.5 bar Cut-in pressure 7.8 bar For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Ordering Pressure switches with auxiliary contacts http://catalog.moeller.net 3/19 MCS Moeller HPL0211-2007/2008 Max. Make and break pressure: separately operating infinitely adjustable. pressure Pressures can be set to any point within the area of the pressure diagram for the appropriate switch. Number bar Part no. Article no. Price see price list Std. pack Notes Pressure switches Contacts Pressure switch with auxiliary contacts, IP65 2 changeover contacts with gold-plated contacts 7 bar 4.5 4 7 1 4.2 P 4 2 MCS4 019711 MCS4-G 058693 1 off 1 N P> 2 3 4 2.5 7 P min 1 changeover contact 1 changeover contact with gold-plated contacts 2 MCS4-SOND910-G 087792 K H 1 0.1 Features: * Pressure pipe flange R k" * If required: pressure pipe flange R m" * IP65 in conjunction with V-M20 cable gland * 1 insulated earth terminal e * 2 cable entry knockouts for M20 * Neoprene diaphragm 0 0 0.3 1 3 2 1.8 P max 4 4.5 bar Min. switching differential: 0.15 bar Example: Cut-out pressure 3.3 bar Cut-in pressure 2.2 bar Cut-in and cut-out pressures are factorypreset as specified with type suffix: a page 3/20 1 changeover contact 1 changeover contact with gold-plated contacts 15 2 changeover contacts with gold-plated contacts 15 bar 11 10 15 1 10.4 P 4 2 P min 8 MCS11 088527 MCS11-G 058692 1 off Auxilliary contacts to IEC/EN 60947-1 6 6.0 MCS...-G: Gold-plated contacts, particularly suitable for switching low voltages and currents from 5 V AC/DC 1 mA. MCS11-SOND910-G 087793 4 2 0.2 R k" corresponds to G k R m" corresponds to G m according to ISO 228-1 0 0 0.5 6 4 2 8 10 11 bar P max Min. switching differential: 0.3 bar Example: Cut-out pressure 8.5 bar Cut-in pressure 4.5 bar 1 changeover contact 1 changeover contact with gold-plated contacts 25 2 changeover contacts with gold-plated contacts 25 P min 25 0.4 bar 22 20 18 16 14 12 10 8 6 4 2 1 P 21.0 2 4 MCS22 098019 MCS22-G 058691 1 off 11.0 MCS22-SOND910-G 087794 0 0 2 4 6 8 10 12 14 16 18 20 22 bar 9.1 1.1 P max Min. switching differential: 0.7 bar Example: Cut-out pressure 17.5 bar Cut-in pressure 7.8 bar For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 3/20 Ordering Accessories Moeller HPL0211-2007/2008 For use with Part no. Order number for separate orders Price see price list Part no. suffix Order number for orders with basic unit Price see price list Std. pack http://catalog.moeller.net Notes Pressure switches Pressure pipe flange Other than standard version MCS with R m" R1/2"-MCS 031617 R1/4"-MCSN 033990 +R1/2"-MCS 001627 +R1/4"-MCSN 001628 1 off M-MCS 071913 +M-MCS 001625 1 off Manometer connection R k", Pressure pipe flange always R m" also with MCS MCS, MCSN E8-MCS 040949 +E8-MCS 001624 1 off External diameter pipe coupling 8 mm Wall fixing bracket built-in, reversible by 180 MCS, MCSN W-MCS 050665 +W-MCS 001631 1 off Wall mounting bracket can be rotated to right or left in 90 stages +S3-MCS 201854 1 off +PMIN(*)/PMAX(*) 203948 1 off MCSN(-V) with R k" Pressure pipe flange with pressure gauge connection MCS, MCSN(-V) 1 off Compression fitting Wall fixing brackets External device plug, IP65 3-pole plus earth for socket adapters to DIN 43650-A/ISO 4400 Plug configuration: a b c a bc MCS MCS...-G Not for use with MCS...SOND910-G - Pressure setting Standard setting of the cut-in and cut-out pressures When ordering, the type reference must include the following details: 1st wildcard q cut-in pressure in bar 2nd wildcard q switch-off pressure in Bar MCS, MCSN Notes Ordering example * Desired part no.: MCS4 * Required cut-in pressure in bar: 2.2 * Required cut-out pressure in bar: 3 A maximum or one decimal place after the comma is possible with the pressure definition. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Engineering Contact travel diagrams http://catalog.moeller.net LSE Moeller HPL0211-2007/2008 LSE-11 Q1 3/21 LSE-02 Q1 Q2 Q2 Basic units 0 0.5 5.5 6.1 Q1 0 0.5 Q2 default=3.0 0 0.5 default=3.0 5.5 6.1 Q1 0 0.5 Q2 default=3.0 0 0.5 default=3.0 9.0 9.6 Q1 0 0.5 Q2 Q2 0 0.5 default=4.4 10 10.8 Q1 0 0.5 Q2 default=5.0 0 5 default=5.0 60 65 Q1 0 5 Q2 default=30 Actuating rod LS-XRR LSM-XRR LS-XRRM LSM-XRRM 0 5 default=30 60 65 Q1 0 5 60 65 Q1 Q2 Q2 default=30 0 5 default=30 60 65 Q1 0 5 60 65 Q1 Q2 Q2 default=30 Spring-rod LS-XS LSM-XS 60 65 Q1 Q2 Adjustable roller lever LS-XRLA LSM-XRLA LS-XRLA30 LS-XRLA40 LS-XRLA40R 10 10.8 Q1 Q2 Rotary lever LS-XRL LSM-XRL 9.0 9.6 Q1 default=4.4 Angled roller lever LS-XLA LSM-XLA 5.5 6.1 Q1 Q2 Roller lever LS-XL LSM-XL LS-XL LS-XLB Position switch Q2 Operating heads Roller plunger LS-XP LSM-XP PLS-XOR 5.5 6.1 Q1 0 3 Q1 default=30 23 26 0 3 23 26 Q1 Q2 Q2 default=13 default=13 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 3/22 Engineering Contact travel diagrams Engineering Contact travel diagrams LS, LSM Moeller HPL0211-2007/2008 LS-02 LS-S02 LSM-02 LS-11 LS-S11 LSM-11 NC 22 LS-11D LS-S11D LSM-11D NO NC 11 12 21 22 21 LS-20 LS-S20 LSM-20 NO NO 15 16 27 28 LS, LSM Moeller HPL0211-2007/2008 LS-11S LS-S11S LSM-11S NC NO 15 16 http://catalog.moeller.net LS-11DA LS-S11DA LSM-11DA NC NC 13 14 http://catalog.moeller.net 22 LS-20A LS-S20A LSM-20A NO NC 13 14 27 28 3/23 21 NO 13 14 NO 23 24 NO 13 14 24 23 Position switch 0 3.0 6.1 0 4.3 0 6.1 3.0 6.1 0 4.0 NC 13-14 NO 15-16 NC 15-16 NC 21-22 NC 21-22 NC 27-28 NO 27-28 NO 3.0 2.1 3.0 Zw = 4.5 mm 3.0 0 6.1 4.3 6.1 0 21-22 13-14 NO 13-14 13-14 23-24 NO 23-24 21-22 2.1 ZW = 5.5 mm Zw = 4.5 mm Zw = 4.5 mm 0 6.1 11-12 2.1 2.1 6.1 NO NO 2.1 ZW = 4.5 mm 13-14 1.6 Zw = 4.5 mm Operating heads Roller plunger LS-XP LSM-XP 0 3.0 6.1 0 4.3 0 6.1 3.0 6.1 0 4.0 NC 13-14 NO 15-16 NC 15-16 NC 21-22 NC 21-22 NC 27-28 NO 27-28 NO 3.0 2.1 3.0 Zw = 4.5 mm 3.0 0 6.1 4.3 6.1 0 21-22 13-14 NO 13-14 13-14 23-24 NO 23-24 21-22 2.1 ZW = 5.5 mm Zw = 4.5 mm Zw = 4.5 mm 0 6.1 11-12 2.1 2.1 6.1 NO NO 2.1 ZW = 4.5 mm 13-14 1.6 Zw = 4.5 mm Roller lever LS-XL, LSM-XL 0 4.4 9.6 0 6.5 0 9.6 4.4 0 9.6 6.3 0 9.6 4.4 0 9.6 6.5 9.6 0 11-12 NC 13-14 NO 15-16 NC 15-16 NC 21-22 13-14 NO 13-14 21-22 NC 21-22 NC 27-28 NO 27-28 NO 13-14 23-24 NO 23-24 4.4 2.9 3.3 Zw = 7.1 mm Zw = 8.6 mm 4.4 Zw = 6.9 mm Zw = 6.9 mm 21-22 3.3 9.6 NO NO 2.5 3.3 13-14 2.3 Zw = 8.7 mm Roller lever, short LS-XLS 0 3.3 6.9 0 4.7 6.9 0 3.3 6.9 0 4.4 6.9 11-12 NC 13-14 NO 15-16 NC 15-16 NC 21-22 NC 21-22 NC 27-28 NO 27-28 NO 3.3 3.3 Zw = 5.0 mm 2.2 Zw = 5.0 mm 2.2 Zw = 5.0 mm 0 3.3 0 6.9 0 6.9 13-14 NO 13-14 13-14 23-24 NC 23-24 21-22 Zw = 6.2 mm 4.7 21-22 2.2 6.9 NO NO 2.2 2.2 13-14 1.7 Zw = 6.2 mm Roller lever, large LS-XLB 0 6.3 13.4 0 9.1 13.4 0 6.3 13.4 0 8.5 13.4 0 6.3 0 13.4 9.1 0 13.4 11-12 NC 13-14 NO 15-16 NC 15-16 NC 21-22 13-14 NO 13-14 21-22 NC 21-22 NC 27-28 NO 27-28 NO 13-14 23-24 NO 23-24 6.3 6.3 Zw = 9.6 mm 4.3 Zw = 9.6 mm 4.3 Zw = 9.6 mm Zw = 12.0 mm 13.4 NO NO 4.3 4.3 21-22 4.3 13-14 3.2 Zw = 12.0 mm Angled roller lever LS-XLA, LSM-XLA 0 5.0 10.8 0 7.2 0 10.8 5.0 0 10.8 7.0 0 10.6 5.0 0 10.8 7.2 10.8 0 11-12 NC 13-14 NO 15-16 NC 15-16 NC 21-22 13-14 NO 13-14 21-22 NC 21-22 NC 27-28 NO 27-28 NO 13-14 23-24 NO 23-24 5.0 3.2 3.6 Zw = 7.6 mm Zw = 9.6 mm 5.0 Zw = 7.6 mm Zw = 7.6 mm 21-22 3.6 10.6 NO NO 3.2 3.6 13-14 2.4 Zw = 9.7 mm Rotary lever LS-XRL, LSM-XRL Adjustable roller lever LS-XRLA, LSM-XRLA, LS-XRLA30, LS-XRLA40, LS-XRLA40R Actuating rod LS-XRR, LSM-XRR, LS-XRRM, LSM-XRRM 0 30 65 0 45 0 65 30 0 65 43 0 65 30 0 65 45 65 0 11-12 NC 13-14 NO 15-16 NC 15-16 NC 21-22 13-14 NO 13-14 21-22 NC 21-22 NC 27-28 NO 27-28 NO 13-14 23-24 NO 23-24 Zw = 47 65 NO NO 20 22 13-14 Zw = 58 Zw = 47 Zw = 47 21-22 22 20 30 30 22 15 Zw = 60 Spring-rod LS-XS, LSM-XS 0 13 0 26 18 26 0 13 0 26 18 26 0 13 0 26 18 26 0 11-12 NC 13-14 NO 15-16 NC 15-16 NC 21-22 13-14 NO 13-14 21-22 NC 21-22 NC 27-28 NO 27-28 NO 13-14 23-24 NO 23-24 13 13 9 9 21-22 9 13-14 7 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 9 26 NO NO 9 Position switch Basic units 3/24 Engineering Position switch Moeller HPL0211-2007/2008 LSI-R8S-F1-LD LSI-R12M-F2-LD LSI-R12P-F2-LD LSI-R12P-NF4-LD LSI-R18M-F5-LD LSI-R18P-F5-LD LSI-R18P-NF8-LD LSI-R30M-F10-LD LSI-R30P-F10-LD LSI-R30P-NF15-LD LSC-R12M-F3-LD LSC-R18M-F5-LD LSC-Q20M-F5-LD LSI-R8S-F1-PD LSI-R8S-NF3-PD LSI-R12M-F2-PD LSI-R12M-NF4-PD LSI-R18M-F5-PD LSI-R18M-NF8-PD LSI-R30M-F10-PD LSI-R30M-NF15-PD LSI-Q40P-F20-PD LSI-Q40P-NF35-PD LSI-R12P-F2-LA LSI-R18P-F5-LA LSI-R30P-F10-LA pnp BN + BU - LSI-*-*-LD with 2 m connection cable (open end) http://catalog.moeller.net Changing the active area LSI-Q40P-...-CA 1 BK a 2 1 BN + 3 BU - 2 WH 3 BU 1 BN a 4 BK pnp 4 BK LSI-*-*-PD with M12 x 1 plug-in connection 4 LSI-*-*-LA with 2 m connection cable (open end) BN BU 3 LSI-Q40P-F20-CA LSI-Q40P-NF35-CA LSI-*-*-CATerminal connection inside enclosure 3 1 4 2 NO LSC-Q40P-F20-CD LSC-R30M-F10-LD pnp BN + BU - NC LSC-*-*-LD with 2 m connection cable (open end)LSC-*-*-CDTerminal connection inside enclosure 5 7 BK WH LSO-R18P-B2000-LD LSO-R18P-B2000-PD LSO-R18P-S300-LD LSO-R18P-S300-PD LSO-R18S-B2000-LD LSO-R18S-B2000-PD LSO-R18S-S300-LD LSO-R18S-S300-PD LSO-R30P-B6000-LD LSO-R30P-B6000-PD LSO-R30P-S400-LD LSO-R30P-S400-PD Q 2 mm BN (1) + LSI-Q40P-...-PD 2 WH 1 BK (4) 3 BU WH (2) BU (3) - BN (1) 4 BK BU (3) pnp 2 + a BK (4) WH (2) a 1 BN LSO-*-*-LD with 2 m connection cable (open end)LSO-*-*-PD with M12 x 1 plug connector LSI-Q40P-F20-CD LSI-Q40P-NF40-CD * - 1 + 3 - LSI-*-*-CDTerminal connection inside enclosure 4 M12 4 3 2 Notes BN q brown BK q black BU q blue WH q white a 6 Set position of cable exit 1 5 a 180 a 3 6 315 2 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Technical Data Complete units LS, LSM, LSE Moeller HPL0211-2007/2008 IP66, IP67 complete units LS, LSM LSE-11 LSE-02 General Standards IEC/EN 60947 IEC/EN 60947 IEC/EN 60947 EN 61000-4 EN 61000-4 EN 61000-4 Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30 Ambient temperature Mounting position Protection type Terminal capacity of screw terminal and Cage Clamp Solid Flexible with ferrules to DIN 46228 C -25...+70 As required IP66, IP67 -25...+70 As required IP66, IP67 -25...+70 As required IP66, IP67 -25...+70 As required IP66, IP67 mm2 mm2 1 x (0.5 - 2.5) 1 x (0.5 - 1.5) 1 x (0.5 - 2.5) 1 x (0.5 - 1.5) 1 x (0.5 - 2.5) 1 x (0.5 - 1.5) 1 x (0.5 - 2.5) 1 x (0.5 - 1.5) Ue V DC 12 - 30 24 (-15%/+20%) 24 (-15%/+20%) Ie Ie I mA mA mA 15 18 19 28 - 45 24 Contacts/switching capacity Rated impulse withstand voltage Uimp Rated insulation voltage Ui Overvoltage category/pollution degree Rated operational current AC-15 24 V Ie 230 V/240 V Ie 400 V/415 V Ie DC-13 24 V Ie 110 V Ie 220 V Ie Analog output Q1 Output voltage (max. 10 mA) Output current Fault scenario Resolution Step tolerance Shunt resistor, resistive load Digital diagnostics output Q2 (switching to + pole PNP) Response threshold V AC V A A A A A A 4000 400 III/3 6 6 4 3 0.8 0.3 0.2 4 - 20 0 100 1 < 400 0 - 10 0 100 1 > 1000 V mA approx. Ue < 200 approx. Ue < 200 g 0.02 g 0.02 HF Fault probability < 10 -7, < 1 fault in 107 operations at 5 V DC/1 mA HF Fault probability < 10-6, < 1 failure at 5 x 106 operations Hz max. 400 A gG/gL mm 6 g 0.02 Notes III/3 V DC mA V Steps Steps O Control circuit reliability at 24 V DC/5 mA Supply frequency Short-circuit rating to IEC/EN 60947-5-1 max. fuse Repetition accuracy LSE-AU IEC/EN 60947 Climatic proofing Power supply Rated voltage Rated operational current 12 V 24 V 30 V LSE-AI g 0.02 The following applies for LSE-11 and LSE-02: ensure that the power supply operates correctly when setting the operating point. Cage Clamp is a registered trademark of Wago Kontakttechnik, 32423 Minden, Germany. Accessories for the Cage Clamp terminals from Wago: Jumper insert, grey, Wago article no. 264-402 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Position switch http://catalog.moeller.net 3/25 3/26 Technical Data Complete units Position switch LS, LSM, LSE Moeller HPL0211-2007/2008 Mechanical variables Lifespan Standard-action contact Operations Snap-action contact Operations Contact temperature of roller head Mechanical shock resistance (half-sinusoidal shock, 20 ms) Standard-action contact Snap-action contact Basic unit Operating frequency Operations/h Switching point Hysteresis Contact sequence (contact closed open Zw = positive opening clearance) Actuation Mechanical Actuating force at beginning/end of stroke Basic units LS(M)-XP LS(M)-XL LS(M)-XLA Actuating torque of rotary drives Max. operating speed with DIN cam Basic units for angle of actuation LS(M)-XRL for angle of actuation LS(M)-XRLA for angle of actuation LS(M)-XRR for LS(M)-XL for angle of actuation LS(M)-XLA for angle of actuation LS(M)-XP for angle of actuation Electromagnetic compatibility (EMC) Electrostatic discharge (IEC/EN 61000-4-2, Level 3, ESD) Air discharge Contact discharge Electromagnetic fields (IEC/EN 61000-4-3, RFI) Burst pulses (IEC/EN 61000-4-4, level 3) Supply cables Signal lines High-energy pulses (surge) (IEC/EN 61000-4-5) Immunity to line-conducted interference to (IEC/EN 61000-4-6) Notes IP66, IP67 complete units LS, LSM LSE-11 LSE-02 LSE-AI LSE-AU LSE-AI LSE-AU x 106 x 106 C 8 8 F 100 F 100 F 100 g g g 25 30 F 3000 0.5 - 5.5 mm, freely adjustable 30 F 3000 30 F 3000 0.4 0.04 0.4 0.06 0.4 0.06 F 6000 mm mm a = 0/30 a = 0 a = 30, L = 125 mm L = 130 mm a = 30/45 a = 30/45 a = 0/30 http://catalog.moeller.net 3 (electronic) F 100 N N N N Nm 1.0/8.0 1.0/8.0 1.0/8.0 1.0/8.0 0.2 3.5/8.0 1.0/8.0 1.0/8.0 1.0/8.0 0.2 3.5/8.0 1.0/8.0 1.0/8.0 1.0/8.0 0.2 3.5/8.0 1.0/8.0 1.0/8.0 1.0/8.0 0.2 m/s m/s m/s m/s m/s m/s m/s 1/0.5 1.5 1.5 1.5 1 1 1/1 1/0.5 1.5 1.5 1.5 1 1 1/1 1/0.5 1.5 1.5 1.5 1 1 1/1 1/0.5 1.5 1.5 1.5 1 1 1/1 kV kV V/m 8 4 10 8 4 10 8 4 10 kV kV kV V 2 2 0.5 10 2 2 0.5 10 2 2 0.5 10 The following applies for LSE-11 and LSE-02: ensure that the power supply operates correctly when setting the operating point. Cage Clamp is a registered trademark of Wago Kontakttechnik, 32423 Minden, Germany. Accessories for the Cage Clamp terminals from Wago: Jumper insert, grey, Wago article no. 264-402 General No. of poles Protection type Lifespan, mechanical Characteristics Rated operational voltage Rated operational current Overvoltage category/pollution degree Operations Ue Ie V AC A Connector M12A(B) M12A(B)5 4 IP66 > 500 5 IP66 > 500 250 4 II/3 125 4 II/3 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Technical Data Position switches LS-...ZB Moeller HPL0211-2007/2008 Safety position switches LS-...ZBZ LS-...ZB General Standards Climatic proofing Ambient temperature Mounting position Protection type Terminal capacities Solid C mm2 mm2 Flexible with ferrule Contacts/switching capacity Rated impulse withstand voltage Rated insulation voltage Overvoltage category/pollution degree Rated operational current AC-15 24 V 230 V/240 V 400 V/415 V DC-13 24 V 110 V 220 V Supply frequency Short-circuit rating to IEC/EN 60947-5-1 Standard-action contact Snap-action contact Operating frequency Actuation Mechanical Actuating force at beginning/end of stroke ZB/ZBZ (push in/pull out) Mechanical holding force acc. to GS-ET-19 (04/2004) XG, XW XFF, XNG, XWA XF XNW Electromechanical For magnet Power consumption at 120 V AC at 230 V AC at 24 V DC Pick-up and drop-out values Magnet duty factor IEC/EN 60947 Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30 -25...+0 -25...+70 -25...+70 As required IP 65 1 x (0.75 - 2.5) 2 x (0.75 - 1.5) 1 x (0.5 - 1.5) 2 x (0.5 - 1.5) 1 x (0.75 - 2.5) 2 x (0.75 - 1.5) 1 x (0.5 - 1.5) 2 x (0.5 - 1.5) 1 x (0.75 - 2.5) 2 x (0.75 - 1.5) 1 x (0.5 - 1.5) 2 x (0.5 - 1.5) Uimp Ui V AC V 4000 400 III/3 6000 500 III/3 6000 500 III/3 Ie Ie Ie Ie Ie Ie A A A A A A Hz 6 6 4 3 0.8 0.3 max. 400 10 6 4 3 0.8 0.3 max. 400 10 6 4 3 0.8 0.3 max. 400 A gG/gL mm 6 g 0.02 6 g 0.02 6 g 0.02 x 106 x 106 1 10 10 g g 10 25 5 F 800 F 1800 F 1800 N 25/15 10/5 15/20 N N N N 1500 1300 750 500 VA VA W x Us % ED 8 11 8 0.85 - 1.1 100 max. fuse Repetition accuracy Mechanical variables Lifespan Standard-action contact Snap-action contact Mechanical shock resistance (half-sinusoidal shock, 20 ms) LS4...ZB Operations Operations Operations/h For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Safety switches http://catalog.moeller.net 3/27 Technical Data Inductive proximity switches Technical Data Inductive proximity switches LSI http://catalog.moeller.net Proximity switches DC voltage version (PNP) LSI-R8...D LSI-R12...D General Standards Ambient temperature Protection type Shock resistance Shock duration 11 ms Characteristics Rated switching distance Flush Non-flush Repetition accuracy of Sn Temperature drift of Sn C g Sn Sn mm mm % % IEC/EN 60947-5-2 -25...+70 -25...+70 IP 67 IP 67 30 30 1.5 2 2 < 10 2 4 2 < 10 LSI-R18...D -25...+70 IP 67 30 5 8 2 < 10 LSI-R30...D -25...+70 IP 67 30 10 15 2 < 10 LSI-Q40...-CD -25...+70 IP 67 30 20 40 2 < 10 Two-wire AC proximity switches LSI-R12...A LSI-R18...A -25...+70 IP 67 30 IEC/EN 60947-5-2 -25...+70 IP 67 30 20 35 2 < 10 LSI http://catalog.moeller.net LSI-Q40...-PD -25...+70 IP 67 30 2 5 2 < 10 2 < 10 3/29 LSI-R30...A -25...+70 IP 67 30 10 < 10 LSI-Q40...A -25...+70 IP 67 30 20 35 < 10 Notes UL-File: E244290 Rated switching distance Sn [mm] with LSI According to the standard, the rated switching distance Sn relates to a measurement control point made of St 37 which is 1 mm thick with the dimensions B 3 H. LSI...R: B x H = device diameter LSI...Q: B x H = edge length * Deviation in the type, size and shape of the approaching metal object * Ambient temperature * Different alloys Ideal band 1,1s n Actuating finger 0,9 s n Active surface Reliable respone range Switching hysteresis of Sn Rated operating voltage Rated operating voltage Supply frequency Residual ripple of Ue Operating current in the switched state at 24 V DC Maximum load current Voltage drop with Ie Max. operating frequency (resistive load) Rated operational current min. Short-time current (10 ms, 5 Hz) Residual current through the load in the blocked state at 230 V AC and 24 V DC Switching state display Operating voltage display Short-circuit protection, polarity reversal, wire breakage Output function Two-wire Three-wire Four-wire Make contact Changeover contact Threaded barrel Threaded barrel Rectangular housing Connection options Cable, open Connector M12, "A"-keyed Enclosure material Plastic Metal Enclosure nut tightening torque Plastic Metal Installation note Sensor to sensor clearance Flush Non-flush Terminal capacities Solid 15 10 - 30 - Ib % V DC V AC Hz % mA F 10 15 F 10 15 F 10 15 F 10 15 F 10 15 F 10 15 Ie Ud f mA V Hz < 150 1.8 F 3000 < 200 1.8 F 2000 < 200 1.8 F 1000 < 200 1.8 F 500 < 200 1.8 F 150 < 200 1.8 F 150 Ie mA A Ir mA 0.1 0.1 0.1 0.1 0.1 LED LED Yellow Yellow Yellow Yellow K K K K K K K K K K K K M8 x 1 K M12 x 1 K M18 x 1 K M30 x 1.5 K Ue Ue Sn mm 15 10 - 30 - 15 10 - 30 - 15 10 - 30 - 15 10 - 65 - 15 20 - 250 20 - 250 50 - 60 15 20 - 250 20 - 250 5060 15 20 - 250 20 - 250 5060 15 20 - 250 20 - 250 5060 < 100 6 F 20 < 400 6 F 20 < 400 6 F 20 < 400 6 F 20 2 1 2 8 2 8 2 8 0.1 1.7 1.7 1.7 1.7 Yellow Green Yellow Green Yellow Yellow Yellow Red K K K K K Programmable K K K K 65 x 40 x 40 M12 x 1 K M18 x 1 K M30 x 1.5 K K K K 114 x 40 x 40 K K K K K K PA CuZn chromed PA CuZn chromed PA CuZn chromed 1 10 2 10 5 25 90 2xd 3xd 2xd 3xd 2xd 3xd 2xd 3xd Stainless steel 1.4301 Nm Nm mm2 K 114 x 40 x 40 K K K K PA PA PA 1 2 5 2xd 2xd 2xd K PBT 2xd 4.5 x d F 2.5 PBT 2xd 4.5 x d sn 1,21s n Total tolerance range 0,81s n Correction factor with LSI: K K K K 15 10 - 30 - PBT 2xd F 2.5 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Steel St 37 1.0 X Sn Nickel chrome Approx. 0.9 X Sn Brass Approx. 0.5 X Sn Aluminium Approx. 0.45 X Sn Copper Approx. 0.4 X Sn Galvanized sheet steel Approx. 0.85 X Sn Stainless-steel depending on the alloy 1.0 0.1 - X Sn Proximity switches 3/28 3/30 Technical Data Capacitive proximity switches Proximity switches LSC Moeller HPL0211-2007/2008 DC voltage version (PNP) LSC-R12M-F3-LD LSC-R18M-F5-LD LSC-R30M-F10-LD LSC-Q20M-F5-LD LSC-Q40P-F20-CD g IEC/EN 60947-5-2 -25...+70 IP 67 30 IEC/EN 60947-5-2 -25...+70 IP 67 30 IEC/EN 60947-5-2 -25...+70 IP 67 30 IEC/EN 60947-5-2 -25...+70 IP 67 30 IEC/EN 60947-5-2 -25...+70 IP 67 30 mm mm % % 3 3 2 < 20 5 5 2 < 20 10 10 2 < 20 5 5 2 < 20 20 30 2 < 20 Ib % V DC % mA 20 10 - 30 F 10 15 20 10 - 65 F 10 15 20 10 - 65 F 10 15 20 10 - 30 F 10 15 20 10 - 65 F 10 15 Ie Ud f mA V Hz < 200 1.8 F 100 < 200 1.8 F 100 < 200 1.8 F 100 < 200 1.8 F 100 < 200 1.8 F 100 Ir mA 0.1 0.1 0.1 0.1 0.1 LED LED Yellow Yellow Yellow K K K Yellow Green K Yellow Green K K K General Standards Ambient temperature Protection type Shock resistance Shock duration 11 ms Characteristics Rated switching distance Flush Non-flush Repetition accuracy of Sn Temperature drift of Sn Switching hysteresis of Sn Rated operating voltage Residual ripple of Ue Operating current in the switched state at 24 V DC Maximum load current Voltage drop with Ie Max. operating frequency (resistive load) Residual current through the load in the blocked state at 230 V AC and 24 V DC Switching state display Operating voltage display Short-circuit protection, polarity reversal, wire breakage Output function Three-wire Four-wire Make contact Changeover contact Style Threaded barrel Threaded barrel Rectangular housing Connection options Cable, open Terminal capacities Solid Enclosure material Plastic Metal Tightening torque Enclosure nut http://catalog.moeller.net C Sn Sn Ue K K K K K K K mm M12 x 1 K K M18 x 1 K K M30 x 1.5 K K K 32 x 20 x 8 114 x 40 x 40 K K K mm2 F 2.5 PBT Nm CuZn chromed CuZn chromed CuZn chromed 10 25 25 GdZn For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Technical Data Optical proximity switches General Standards Ambient temperature Protection type Characteristics Range Rated operating voltage Maximum load current Operating current in the switched state at 24 V DC Max. operating frequency (resistive load) Overcurrent release Readiness delay Switching state display Alarm display Operating voltage display Fault display Terminal connection Style Style Threaded barrel Connection options Cable, open Connector M12, "A"-keyed Enclosure material Plastic Metal Enclosure nut tightening torque Plastic Metal Notes LSO Moeller HPL0211-2007/2008 DC voltage version (PNP) Retro-reflective sensor Diffuse mode sensor LSO-R18...-B... LSO-R30...-B... LSO-R18...-S... LSO-R30...-S... IEC/EN 60947-5-2 -40...+70 IP 67 IEC/EN 60947-5-2 -40...+70 IP 67 IEC/EN 60947-5-2 -40...+70 IP 67 IEC/EN 60947-5-2 -40...+70 IP 67 mm V DC mA mA Hz mA ms LED LED LED LED 2000 10 - 30 < 150 25 F 160 220 100 Yellow Yellow, flashing Green Green, flashing K Programmable 6000 10 - 30 < 150 30 F 160 220 100 Yellow 300 10 - 30 < 150 25 F 160 220 100 Yellow 400 10 - 30 < 150 30 F 160 220 100 Yellow Green Green, flashing K Programmable Green Green, flashing K Programmable Green Green, flashing K Programmable mm M18 x 1 M30 x 1.5 M18 x 1 M30 x 1.5 K K K K K K K K PBT Stainless steel 1.4301 PBT PBT Stainless steel 1.4301 PBT 5 25 5 5 25 5 C Ue Ie Ib f tv Nm Nm Switching range Sd [mm] with LSO The switching range is defined conform to IEC/EN 60947-5-2. It relates to reflected-light beams on a white paper card with a 90 % degree of reflection and * 100 mm edge length with Sd < 400 mm * 200 mm edge length with Sd f 400 mm Correction factor with LSO as an optical sensor: Paper, matt white, 200 g/m2 1.0 X Sd Metal, gloss 1.2...1.6 X Sd Aluminium, black anodized 1.1...1.8 X Sd Expanded polystyrene, white 1 X Sd Cotton, white 0.6 X Sd PVC, grey 0.5 X Sd Wood, untreated 0.4 x Sd Carton, black, gloss 0.3 x Sd Carton, black, matt 0.1 x Sd Short-circuit protection monitored DC-operated proximity switches are proof against short-circuit. The device is not damaged by the effects of a short-circuit. No matter how long its duration. Once the fault has been cleared, the switch is immediately ready for operation again. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Proximity switches http://catalog.moeller.net 3/31 3/32 Technical Data Pressure switches MCS (N) Moeller HPL0211-2007/2008 Pressure switches Pressure switches MCS General Standards Test pressure Rupturing pressure Operating frequency Climatic proofing Half-sinusoidal shock 20 ms Amplitude 1 mm g Hz 36 36 Operations x 106 1-2 0.5 mm2 1 x (0.75 - 2.5) mm2 1 x (0.5 - 1.5) 1 x (0.75 - 2.5) 2 x (0.75 - 2.5) 1 x (0.5 - 1.5) 2 x (0.5 - 1.5) Flat terminal with clamping washer Operations/h Vibration resistance acc. to IEC/EN 60068-2-6 Lifespan at 50 - 12% pressure differential Terminal capacities Solid C Flexible with ferrules to DIN 46228 Tunnel terminal Terminations Terminal screw Tightening torque of terminal screw M3 0.5 M4 V AC V 4000 400 III/3 4000 400 III/3 Type PKZ2/ZM16 PKZ2/ZM16 A 10 20 1 230 V A 2 230 V 400 V A A 24 V 110 V A A 24 V 110 V 250 V A A A Hz Nm Contacts/switching capacity Rated impulse withstand voltage Rated insulation voltage Overvoltage category/pollution degree Max. short-circuit protective device Fuseless Fuse Type of coordination Rated operational current AC-15 Rated operational current AC-3 Rated operational current DC-13 Rated operational current DC - 3 Rated frequency Notes MCSN IEC/EN 60947-5-1 32 32 90 90 F 3000 F 1500 Damp heat, constant to IEC 60068-2-78 Damp heat, cyclic to IEC 60068-2-30 -25...70 -25...70 IP 65 IP 65 As required As required > 10 > 10 bar bar Ambient temperature Protection type Mounting position Mechanical shock resistance to IEC 60068-2-27 http://catalog.moeller.net Uimp Ui gG/gL f 15 11.5 2 0.5 50 16 12.5 2 50 The following applies to the rated operational current for DC-13: * with 24 V: ...SOND910-G: 0.25 A * with 110 V: ...SOND910-G: 0.8 A For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Dimensions LS-Titan position switches http://catalog.moeller.net 3/33 LS(M) Moeller HPL0211-2007/2008 22 20 30 21 b o4 14 31 Position switch M20 4.3 50 76 5.3 11.7 30 f 15 1.95 7.3 21 55 c a 12.7 8.2 4.3 25 11.7 12.7 8.2 f 20 Position switch LS-..., LSM-..., LSE-... 33.5 a Tightening torque of cover screws: 0.8 Nm g0.2 Nm b only with LS (insulated version) c Fixing screws 2 x M4 f 30 MA = 1.5 Nm Position switch LS(M)-.../P Rotary lever LS(M)-.../RL f 20 46.2 12.7 9 40.5 23.9 2.5 f 20 65 30 65 5 30 27 25.5 26.5 30 21 40 o 14 30 Adjustable roller lever LS(M)-.../RLA Position switches LS(M)-.../S o 5.8 30 12.7 30 65 65 f 44.5 a 10 26 26 126 32.2 o 18 - 40 f 20 54.5 46.4 a setting range of 54.5 to 97 Roller lever LS(M)-.../L Actuating rod LS(M)-.../RR 12.7 3.4 o6 34.4 13 30 31 f 20 5 a 65 Angled roller lever LS(M)-XLA 33.2 65 12.7 13 36.3 5 43 46 30 f 20 f8 a LS.../RR F 150 LS.../RRM F 210 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 3/34 Dimensions Position switches LS-M Moeller HPL0211-2007/2008 http://catalog.moeller.net Front fixing, non expandable LS(M)-.../F 16.5 28.5 M3 a 10.2 a 58.15 a screw-in depth max. 12 mm 32 61.35 22 10 7.5 M5 20 M5 Actuating rod LS(M)-.../OR a 12.7 b f 6.1 c a Approach direction, vertical b guide is done by customer, not included c max. push-through o 6.5 31 110 o4 Roller lever, large LS(M)-.../LB Roller lever, short LS(M)-.../LS 12.7 5 36.5 o 13 30 30 41.3 52.3 f 39 22 f 29.7 o 30 12.7 5.6 f 20 20.35 f 20 Position switch 21.5 a Tightening torque of cover screws: 0.8 Nm g0.2 Nm For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Dimensions Safety position switch http://catalog.moeller.net Moeller HPL0211-2007/2008 Safety position switches LS...-ZBZ MA= 0.6 Nm 3/35 LS...-ZB 4 x 90 +1 MA= 1.4 Nm 1.5 5.5 0.1 - 3.0 27 50 Rf2 55 36 30.8 6 3.5 18.5 +0.5 22.1 136.3 171 F 173 30.8 +0.5 M 20x1.5 F 120 F 180 32 32 19.75 o 5.2 M5 x f 35 10 15.15 F 60 14.95 4.3 - 7.2 16 R f 45 18 0 a 37.8 15.15 F 39 29.6 LS-S...FT-ZBZ/... LS-XWA-ZBZ +0.5 +0.5 F U=0V b U=0V Switch must not be used as a mechanical stop. a = the auxiliary release mechanism must be sealed for proper operation! b can be used as stop with the corresponding material selection and design For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Safety switches Rf 250 5.5 0.5 +1 3/36 Dimensions Safety position switch LS-...-ZBZ Moeller HPL0211-2007/2008 Actuators LS-XG-ZBZ LS-XW-ZBZ http://catalog.moeller.net LS-XF-ZBZ 16.5 35 22.5 20 18.9 M6 M5 M5 5.75 61 16.5 M6 a 2 35 7.3 33.45 20 41 5.75 44.35 M5 12.45 M5 30 28 54.15 16.5 a LS-XNW-ZBZ LS-XNG-ZBZ 16.5 28.5 2 16.5 a a 20 7.5 M5 48.35 10 7.5 74.5 67 58.15 32 61.35 21.5 M5 39 20 M5 7 M5 39 18.8 Fixing only allowed with M5 fixing screw and washer according to DIN EN ISO 7093 Fixing only allowed with M5 fixing screw and washer according to DIN EN ISO 7093 LS-XFG-ZBZ LS-XWA-ZBZ 22.5 55.12 25.5 2 a 41 12 104.5 5.35 M6 a 40 24 o 4.1 16.5 M6 20 6 6.5 39.1 Safety switches 6 a 2 6.5 16.5 18 pin with a 4 mm pin after mounting 16.5 30 3 2 a Distance to device head = 0.1 ... 3.0 mm For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Dimensions Position switches, safety position switch http://catalog.moeller.net 3/37 LS, LSR Moeller HPL0211-2007/2008 Safety door flap switch LSR-.../TKG Safety hinge switch LSR-.../TS 56.9 110 o 12 34.2 2 26.45 11 13 20 59 80 50 30 5.1 12.5 Safety switches 16 o3 20 360 o8 110 72 5 22 30 16 26.45 M20 F 83 80 7.5 3.5 1.55 F 32 135 16 20 M20 32 22 30 83 Safety position switches LS...-ZB 25.8 0.5 - 2.5 4.5 0.5 - 3 200 15.3 Rf 30 30 2 +1 4.5 o 4.4 33.65 41 +1 20 o9 25 29.4 96 20 13 M = 0.8 Nm 22 4.1 15 5.3 33.35 M20 x 1.5 30.7 22.65 0.5 - 3 M = 0.8 Nm +1 +1 Rf 0 20 Switch must not be used as a mechanical stop. For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 3/38 Dimensions Safety position switch LS...-ZB Moeller HPL0211-2007/2008 http://catalog.moeller.net Safety position switches LS4...ZB 33.5 44.7 12.5 Safety switches 17 42 9.5 5.0 M = 1.4 Nm 33.5 17.8 7.3 30 M5 60 83 60 4M5 x 40 3.5 15 M20 30 5.3 40 30 40 5.3 Actuator 50 25 0.5 - 9 4.8 11.2 24 7.8 16 33.5 R f 400 Switch must not be used as a mechanical stop. 24 0.5 - 14 Rf4 00 55 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Dimensions Inductive proximity switches LSI Moeller HPL0211-2007/2008 LSI-R12M-F2-LD 17 17 45 40 50 36 50 57 LSI-R12P-F2-LD LSI-R12P-NF4-LD LSI-R12P-F2-LA 17 M12 x 1 M12 x 1 M8 x 1 M12 x 1 13 45 LSI-R12M-F2-PD LSI-R12M-NF4-PD LSI-R18P-NF8-LD LSI-R18P-F5-LD LSI-R18P-F5-LA LSI-R18M-F5-LD 52 LSI-R18M-NF8-PD LSI-R18M-F5-PD 24 24 M12 x 1 M18 x 1 M18 x 1 17 M12 x 1 Proximity switches LSI-R8S-F1-PD LSI-R8S-NF3-PD M12 x 1 DC voltage version (PNP) Metal housing LSI-R8S-F1-LD M12 x 1 http://catalog.moeller.net 3/39 40 36 45 60 50 LSI-R30M-F10-LD 52 LSI-R30M-NF15-PD LSI-R30M-F10-PD LSI-R30P-F10-LD LSI-R30P-F10-LA LSI-R30P-NF15-LD 36 36 M30 x 1.5 M12 x 1 M30 x 1.5 M30 x 1.5 36 46 55 50 62 60 60 LSI-Q40P-F20-CD LSI-Q40P-F20-CA LSI-Q40P-NF40-CD LSI-Q40P-NF35-CA 7.3 15 50 46 12 65 40 LSI-X4P-CAF-A4N LSI-X4M-PAF-A4N M12 x 1 26.5 M12 x 1 o 20 o 20 31.5 30.5 LSI-X3M-CA2-D4Y LSI-X3M-CAPS1-D4Y LSI-X3M-CA5-D4Y LSI-X4M-CAPS1-D4Y LSI-X4M-CA2-A4N 6 35 114 40 46 20 62 30.5 35 30 25 7.3 5.3 5.3 30 M20 x 1.5 M12 X 1 LSI-Q40P-NF35-PD LSI-Q40P-F20-PD 35 41 LSI-X3M-CSPS5-A4N LSI-X3M-CSPS2-A4N LSI-X3M-CSPS1-A4N LSI-X3M-CSPS1,5-A4N LSI-X4M-CSPS1-A4N LSI-X4M-CSPS5-A4N LSI-X4M-CSPS2-A4N LSI-X4M-CS2-A4N LSI-X4P-CSF-A4N o 15 LSI-X4M-PSF-A4N M12 x 1 M12 x 1 o 20 48.5 54 o 20 60 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 3/40 Dimensions Capacitive and optic proximity switches LSC, LSO Moeller HPL0211-2007/2008 LSC capacitive proximity switches LSC-R12M-F3-LD LSC-R18M-F5-LD LSC-R30M-F10-LD 24 36 M30 x 1.5 M18 x 1 M12 x 1 17 40 60 65 70 61 81 LSC-Q20M-F5-LD LSC-Q40P-F20-CD o 3.4 M20 x 1.5 5.3 7.3 30 25 20 12 8 3 35 15 50 35 46 62 114 40 Optical proximity switches LSO-R18P-S300-PD LSO-R18P-B2000-PD LSO-R18S-S300-PD LSO-R18S-B2000-PD LSO-R18S-B2000-LD LSO-R18P-S300-LD LSO-R18P-B2000-LD LSO-R18S-S300-LD 36 M30 x 1.5 M18 x 1 M12 x 1 M18 x 1 LSO-R30P-B6000-LD LSO-R30P-S400-LD 24 24 37 37 59 78 53 69 LSO-R30P-B6000-PD LSO-R30P-S400-PD Reflectors for optical proximity switches LSO-XR40 LSO-XR75 M12 x 1 4.8 36 M30 x 1.5 Proximity switches http://catalog.moeller.net 46 2.8 7.6 75 53 77 2 9 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616 Dimensions Pressure switches MCS Moeller HPL0211-2007/2008 Pressure switches MCS..., MCS N... 24 60 a Part no. Cable entry a MSC... MSCN... 2 x M20 2 x M20 R 1/4" 27 R 1/2" 36 93 M20 MCSN...V With relief valve Pressure switches http://catalog.moeller.net 3/41 30 19 96 31 60 6 6 123 +M-MCS R 1/4" MCSN...-V MCSN...-VG 7 134 124 18 5,2 40 142 ...+W-MCS 31 22 115 111 74 ...+ E8 - MCS 5,2 40 32 6 40 For Moeller Electric Sales and Support call KMparts.com (866) 595-9616