TPCA8026 TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (U-MOS) TPCA8026 Lithium-Ion Battery Applications Notebook PC Applications Portable Equipment Applications Unit: mm 1.27 0.4 0.1 8 5.0 0.2 Low drain-source ON-resistance: RDS (ON) = 1.8 m (typ.) * High forward transfer admittance: |Yfs| =100 S (typ.) * Low leakage current: IDSS = 10 A (max) (VDS = 30 V) * Enhancement mode: Vth = 1.3 to 2.5 V (VDS = 10 V, ID = 1 mA) 0.595 5.0 0.2 0.05 S S Absolute Maximum Ratings (Ta = 25C) 4 1 0.6 0.1 Rating Unit Drain-source voltage VDSS 30 V Drain-gate voltage (RGS = 20 k) VDGR 30 V Gate-source voltage VGSS 20 V (Note 1) ID 45 Pulsed (Note 1) IDP 135 PD 45 W JEDEC PD 2.8 W JEITA DC Drain current Drain power dissipation (Tc = 25) Drain power dissipation (t = 10 s) (Note 2a) Drain power dissipation (t = 10 s) A 1.6 W EAS 263 mJ IAR 45 A EAR 3.4 mJ Channel temperature Tch 150 C Storage temperature range Tstg -55 to 150 C Single-pulse avalanche energy (Note 3) Avalanche current Repetitive avalanche energy (Tc = 25) (Note 4) 4.25 0.2 5 1,2,3: SORCE 5,6,7,8:DRAIN TOSHIBA PD (Note 2b) 3.5 0.2 Symbol 8 A 0.8 0.1 Characteristic 4 1 0.166 0.05 * 0.15 0.05 1.1 0.2 6.0 0.3 Small footprint due to a small and thin package 0.95 0.05 * 0.05 M A 5 4: GATE 2-5Q1A Weight: 0.069 g (typ.) Circuit Configuration 8 7 6 5 Note: For Notes 1 to 4, refer to the next page. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in 4 1 2 3 temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). This transistor is an electrostatic-sensitive device. Handle with care. 1 2008-06-26 TPCA8026 Thermal Characteristics Characteristic Symbol Max Unit Rth (ch-c) 2.78 C/W Rth (ch-a) 44.6 C/W Rth (ch-a) 78.1 C/W Thermal resistance, channel to case (Tc = 25) Thermal resistance, channel to ambient (t = 10 s) (Note 2a) Thermal resistance, channel to ambient (t = 10 s) (Note 2b) Marking (Note 5) TPCA 8026 Part number Lot No. Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: (a) Device mounted on a glass-epoxy board (a) (b) Device mounted on a glass-epoxy board (b) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) FR-4 25.4 x 25.4 x 0.8 (Unit: mm) (b) (a) Note 3: VDD = 24 V, Tch = 25C (initial), L = 0.1 mH, IAR = 45 A Note 4: Repetitive rating: pulse width limited by maximum channel temperature Note 5: Weekly code: (Three digits) Week of manufacture (01 for the first week of the year, continuing up to 52 or 53) Year of manufacture (The last digit of the year) 2 2008-06-26 TPCA8026 Electrical Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit Gate leakage current IGSS VGS = 20 V, VDS = 0 V 100 nA Drain cutoff current IDSS VDS = 30 V, VGS = 0 V 10 A V (BR) DSS ID = 10 mA, VGS = 0 V 30 V (BR) DSX ID = 10 mA, VGS = -20 V 10 VDS = 10 V, ID = 1 mA 1.3 2.5 VGS = 4.5 V, ID = 23 A 2.7 4.5 VGS = 10 V, ID = 23 A 1.8 2.2 VDS = 10 V, ID = 23 A 50 100 4200 1000 1400 15 30 Drain-source breakdown voltage Gate threshold voltage Vth Drain-source ON-resistance RDS (ON) Forward transfer admittance |Yfs| Input capacitance Ciss Reverse transfer capacitance Crss Output capacitance Coss tr Turn-on time ton 4.7 Switching time Fall time tf Turn-off time toff Total gate charge (gate-source plus gate-drain) ID = 23A VOUT VGS 10 V 0V RL = 0.65 Rise time VDS = 10 V, VGS = 0 V, f = 1 MHz VDD 15 V Duty 1%, tw = 10 s Qg Gate-source charge 1 Qgs1 Gate-drain ("miller") charge Qgd VDD 24 V, VGS = 10 V, ID = 45 A V V m S pF ns 36 111 113 13 42 nC Source-Drain Ratings and Characteristics (Ta = 25C) Characteristic Drain reverse current Forward voltage (diode) Pulse (Note 1) Symbol Test Condition Min Typ. Max Unit IDRP 135 A -1.2 V VDSF IDR = 45 A, VGS = 0 V 3 2008-06-26 TPCA8026 10 8 ID - VDS 50 3.6 3.8 10 4 8 (A) (A) ID Common source Ta = 25C Pulse test Drain current ID Drain current 5 6 3.2 20 3 10 3.6 4.5 4.5 30 3.8 3.4 4 40 ID - VDS 100 80 5 6 Common source Ta = 25C Pulse test 60 3.4 40 3.2 20 3 VGS = 2.8 V 0 0 0.2 0.4 0.6 0.8 Drain-source voltage VDS VGS = 2.8 V 0 0 1 (V) 1 2 Drain-source voltage ID - VGS VDS (V) 80 60 Drain-source voltage (A) VDS 5 (V) 0.4 Common source VDS = 10 V Pulse test ID 4 VDS - VGS 100 Drain current 3 40 100 Ta = -55C 20 25 Common source Ta = 25C Pulse test 0.32 0.24 0.16 ID = 45 A 0.08 23 12 0 0 1 2 3 Gate-source voltage 4 5 VGS 0 0 6 2 4 Gate-source voltage (V) |Yfs| - ID VGS 10 (V) 100 100 Ta = -55C 10 100 25 1 Common source VDS = 10 V Pulse test 1 10 Drain-source ON-resistance RDS (ON) (m) Forward transfer admittance |Yfs| (S) 8 RDS (ON) - ID 1000 0.1 0.1 6 Common source Ta = 25C Pulse test 10 4.5 VGS = 10 V 1 0.1 100 Drain current ID (A) 1 10 100 Drain current ID (A) 4 2008-06-26 TPCA8026 RDS (ON) - Ta IDR - VDS 1000 (A) Common source Pulse test IDR 6 Drain reverse current Drain-source ON-resistance RDS (ON) (m) 8 ID = 12, 23, 45 A 4 VGS = 4.5 V ID = 12, 23, 45 A 2 VGS = 10 V 0 -80 -40 0 40 80 120 100 1 VGS = 0 V 1 Common source Ta = 25C Pulse test -0.2 Capacitance - VDS -0.6 -0.8 VDS (V) 80 120 -1 Vth - Ta 3 Vth (V) 10000 Ciss 1000 Gate threshold voltage Coss C (pF) -0.4 Drain-source voltage Ambient temperature Ta (C) Capacitance 3 4.5 10 0.1 0 160 10 Crss 100 Common source VGS = 0 V f = 1 MHz Ta = 25C 10 0.1 1 10 Drain-source voltage 100 VDS (V) 2.5 2 1.5 1 Common source 0.5 V DS = 10 V ID = 1mA Pulse test 0 -80 -40 0 40 160 Ambient temperature Ta (C) Dynamic input/output characteristics (V) 16 VGS 40 20 Common source ID = 40 A Ta = 25C Pulse test 30 12 VDD = 6V VDS 12 24 20 8 VGS 10 0 0 4 20 40 60 80 100 Total gate charge 120 Qg 140 160 Gate-source voltage Drain-source voltage VDS (V) 50 0 180 (nC) 5 2008-06-26 TPCA8026 rth - tw 1000 Transient thermal impedance rth (C/W) (1) Device mounted on a glass-epoxy board (a) (Note 2a) (2) Device mounted on a glass-epoxy board (b) (Note 2b) (3) Tc = 25 (2) 100 (1) 10 (3) 1 Single pulse 0.1 0.001 0.01 0.1 1 Pulse width 10 100 tw (s) PD - Ta (W) 40 PD (1) 2.5 2 Drain power dissipation Drain power dissipation PD - Tc 50 (1) Device mounted on a glass-epoxy board (a) (Note 2a) (2) Device mounted on a glass-epoxy board (b) (Note 2b) t = 10 s PD (W) 3 (2) 1.5 1 0.5 0 0 40 1000 80 120 30 20 10 0 0 160 Ambient temperature Ta (C) 40 80 Case temperature Tc 120 160 (C) Safe operating area 1000 1 ms * ID max (continuous) t = 10 ms * Drain current ID (A) ID max (Pulse) * 100 10 DC operation Tc = 25 C 1 * Single pulse Ta = 25C Curves must be derated linearly with increase in temperature. 0.1 0.1 1 Drain-source voltage VDSS max 10 VDS 100 (V) 6 2008-06-26 TPCA8026 RESTRICTIONS ON PRODUCT USE * Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2008-06-26