________________General Description
The MAX4524/MAX4525 are low-voltage, single-supply
CMOS analog switches configured as a 4-channel mul-
tiplexer/demultiplexer (MAX4524) and a double-
pole/double-throw (DPDT) switch (MAX4525). Both
have an inhibit input to simultaneously open all signal
paths.
These devices operate from a single supply of +2V to
+12V and are optimized for operation with +3V or +5V
supplies. On-resistance is 200Ωwith a +5V supply and
500Ωwith a +3V supply. Each switch can handle Rail-
to-Rail analog signals. The off-leakage current is only
2nA at +25°C or 20nA at +85°C.
All digital inputs have 0.8V to 2.4V logic thresholds,
ensuring TTL/CMOS-logic compatibility when using a
single +5V supply.
________________________Applications
Battery-Operated Equipment
Audio and Video Signal Routing
Low-Voltage Data-Acquisition Systems
Communications Circuits
____________________________Features
♦Tiny 10-Pin TDFN Package
♦Single-Supply Operation from +2V to +12V
♦200ΩΩ On-Resistance with +5V Supply
♦500ΩΩ On-Resistance with +3V Supply
♦Guaranteed 8ΩΩ On-Resistance Match at +5V
♦Guaranteed 2nA Max On-Leakage at +5V
♦TTL/CMOS-Logic Compatible
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
________________________________________________________________ Maxim Integrated Products 1
1
2
3
4
5
10
9
8
7
6
V+
COM
NO0
ADDAINH
NO1
NO3
NO2
MAX4524
µMAX
TOP VIEW
ADDBGND
INH
1
0
0
0
0
INH
1
MAX4525
MAX4524
ADD
X
00
01
ON SWITCH
NONE
COMA-NCA,
COMB-NCB
COMA-NOA,
COMB-NOB
ADDB
X
0
0
1
1
X = DON’T CARE
ADDA
X
0
1
0
1
ON SWITCH
NONE
COM-NO0
COM-NO1
COM-NO2
COM-NO3
LOGIC
1
2
3
4
5
10
9
8
7
6
V+
COMB
NOB
NCBINH
NCA
COMA
NOA
MAX4525
µMAX
ADDGND LOGIC
1
2
3
4
5
10
9
8
7
6
V+
COM
NO0
ADDAINH
NO1
NO3
NO2
TDFN
ADDBGND
LOGIC
1
2
3
4
5
10
9
8
7
6
V+
COMB
NOB
NCBINH
NCA
COMA
NOA
TDFN
ADDGND LOGIC
______________________Pin Configurations/Functional Diagrams/Truth Tables
19-1332; Rev 2; 6/07
_______________Ordering Information
*Contact factory for availability.
**EP = Exposed Pad.
PART TEMP RANGE PIN-
PACKAGE
TOP
MARK
MAX4524CUB
0°C to +70°C 10 µMAX —
MAX4524C/D 0°C to +70°C Dice* —
MAX4524EUB
-40°C to +85°C 10 µMAX —
MAX4524ETB
-40°C to +85°C
10 TDFN-EP**
(3mm x 3mm)
AAP
MAX4525CUB
0°C to +70°C 10 µMAX —
MAX4525C/D 0°C to +70°C Dice* —
MAX4525EUB
-40°C to +85°C 10 µMAX —
MAX4525ETB
-40°C to +85°C
10 TDFN-EP**
(3mm x 3mm)
AAQ
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS—Single +5V Supply
(V+ = 4.5V to 5.5V, GND = 0V, VAH = 2.4V, VAL = 0.8V, TA= TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.) (Notes 2, 7)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
(Voltages Referenced to GND)
V+ ..............................................................................-0.3V, +13V
Voltage into any terminal (Note 1) ................-0.3V to (V+ + 0.3V)
Continuous Current into any Terminal ..............................±20mA
Peak Current, NO, NC or COM_
(pulsed at 1ms,10% duty cycle)....................................±40mA
ESD per Method 3015.7 ..................................................>2000V
Continuous Power Dissipation (TA= +70°C)
10-Pin µMAX (derate 4.1mW/°C above +70°C) ............330mW
10-Pin TDFN (derate 24.4mW/°C above +70°C) ........1951mW
Operating Temperature Ranges
MAX452_C_ _ ......................................................0°C to +70°C
MAX452_E_ _....................................................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
VA= VINH = 2.4V
V+ = 4.5V, ICOM = 1mA, VCOM = 3.5V
V+ = 5.5V; ICOM = 1mA;
VCOM = 1.5V, 2.5V, 3.5V
VA= VINH = 0.8V
CONDITIONS
µA-1 +1IIH
Input Current Low
90 150
VV- V+
VCOM,
VNO
Analog Signal Range
µA-1 +1IIH
Input Current High
Ω
210
∆RON
COM-NO/NC On-Resistance
Match Between Channels
(Note 3)
Ω512RFLAT
COM-NO/NC On-Resistance
Flatness (Note 4)
-1 +1
-2 +2
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
Note 1: Voltages exceeding V+ or GND on any signal terminal are clamped by internal diodes. Limit forward-diode current to max-
imum current rating.
V0.8 1.5VIL
Logic Input Logic
Threshold Low
V+ = 5.5V; VNO = 1V, 4.5V; VCOM = 4.5V, 1V nA
-10 +10
INO(OFF),
INC(OFF),
NO/NC Off-Leakage
(Note 5)
+25°C
C, E
C, E
+25°C
+25°C
+25°C
+25°C
C, E
TEMP
C, E
C, E
V+ = 4.5V, ICOM = 1mA, VCOM = 3.5V C, E Ω
200
RON
COM-NO/NC On-Resistance
C, E
-50 +50C, E
V+ = 5.5V; VNO = 1V, 4.5V;
VCOM = 4.5V, 1V nA
-25 +25
ICOM(OFF)
COM Off-Leakage
(Note 5)
C, E
-1 +1+25°C
MAX4524
MAX4525
MAX4524
MAX4525
-50 +50C, E
V+ = 5.5V; VCOM = 4.5V, 1V nA
-25 +25
ICOM(ON)
COM On-Leakage
(Note 5)
C, E
-1 +1+25°C
-2 +2+25°C
15
V1.5 2.4VIH
Logic Input Logic
Threshold High C, E
ANALOG SWITCH
DIGITAL I/O
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
________________________________________________________________________________________ 3
ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)
(V+ = 4.5V to 5.5V, GND = 0V, VAH = 2.4V, VAL = 0.8V, TA= TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.) (Notes 2, 7)
ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V+ = 2.7V to 3.6V, GND = 0V, VAH = 2.0V, VAL = 0.5V, TA= TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.) (Notes 2, 7)
RL = 600Ω, VCOM = 2.5Vp-p, 20Hz to 20kHz
RL = 50Ω, f = 1MHz, Figure 5
RL= 50Ω, f = 1MHz, Figure 5
VNO_ = 0V, f = 1MHz, Figure 6
C = 1nF, RS= 0Ω, VS= 2.5V, Figure 4
CONDITIONS
%0.2THDTotal Harmonic Distortion
-1 +1
V212V+Power-Supply Range
VNO_ = 3V, RL= 300Ω, CL= 35pF,
Figure 2 ns
200
t(ON)
Inhibit Turn-On Time
+25°C
dB-74VCT
Channel-to-Channel
Crosstalk (MAX4525)
dB-75VISO
Off-Isolation
20
14
pF4CNO(OFF)
NO/NC Off-Capacitance
90 150
+25°C
pC0.8 5QCharge Injection (Note 6)
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
+25°C
+25°C
+25°C
+25°C
+25°C
+25°C
TEMP
+25°C
C, E
C, E
VNO_ = 3V, RL= 300Ω, CL= 35pF,
Figure 2 ns
180
t(OFF)
Inhibit Turn-Off Time 40 120+25°C
C, E
VNO_ = 3V, RL= 300Ω, CL= 35pF, Figure 3 nstBBM
Break-Before-Make Time
VNO_ = 3V/0V, RL= 300Ω, CL= 35pF,
Figure 1 ns
200
tTRANS
Address Transition Time
520+25°C
90 150+25°C
C, E
V+ = 5.5V, VADD = VINH = V+ or 0V µA
-10 +10
I+Power-Supply Current C, E
V+ = 2.7V, ICOM = 0.1mA, VCOM = 1.5V C, E Ω
500
RON
COM-NO/NC On-Resistance
MAX4524
MAX4525
CONDITIONS
-50 +50C, E
V+ = 3.6V; VNO = 1V, 3V;
VCOM = 3V, 1V nA
-25 +25
ICOM(OFF)
COM Off-Leakage
(Note 6)
C, E
-1 +1
V+ = 3.6V; VNO = 1V, 3V; VCOM = 3V, 1V nA
-10 +10
INO(OFF),
INC(OFF)
NO/NC Off-Leakage
(Note 6)
+25°C
C, E
+25°C
190 400
VV- V+
VCOM,
VNO
Analog Signal Range
-1 +1
-2 +2
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
+25°C
+25°C
TEMP
C, E
ANALOG SWITCH
VNO_ = 0V, f = 1MHz, Figure 6 pF
6
CCOM(OFF)
COM Off-Capacitance +25°C
VNO_ = 0V, f = 1MHz, Figure 6 pF
12
CCOM(ON)
COM On-Capacitance +25°C
SWITCH DYNAMIC CHARACTERISTICS
POWER SUPPLY
MAX4524
MAX4525
MAX4524
MAX4525
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
4 _______________________________________________________________________________________
Note 2: The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Note 3: ∆RON = RON(MAX) - RON(MIN)
Note 4: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal ranges; i.e., VNO = 3V to 0V and 0V to 3V.
Note 5: Leakage parameters are 100% tested at maximum-rated hot operating temperature, and guaranteed by correlation at
TA= +25°C.
Note 6: Guaranteed by design, not production tested.
Note 7: TDFN parts are tested at +25°C and are guaranteed by design and correlation over the entire temperature range.
ELECTRICAL CHARACTERISTICS—Single +3V Supply (continued)
(V+ = 2.7V to 3.6V, GND = 0V, VAH = 2.0V, VAL = 0.5V, TA= TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.) (Notes 2, 7)
VA= VINH = 2.0V
VA= VINH = 0.5V
CONDITIONS
+25°C
V1.0 2.0VIH
Logic Input Logic
Threshold High C, E
µA-1 +1IIH
Input Current Low
-2 +2
µA-1 +1IIH
Input Current High
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
V0.5 1.0VIL
Logic Input Logic
Threshold Low
C, E
C, E
TEMP
C, E
170 300+25°C
VNO_ = 1.5V, RL= 300Ω, CL= 35pF,
Figure 2
50 200
ns
400
t(ON)
Inhibit Turn-On Time C, E
+25°C
VNO_ = 1.5V, RL= 300Ω, CL= 35pF,
Figure 2
130 300
ns
300
t(OFF)
Inhibit Turn-Off Time C, E
+25°C
VNO_ = 1.5V/0V, RL= 300Ω, CL= 35pF,
Figure 1 ns
400
tTRANS
Address Transition Time C, E
Figure 3, VNO_ = 1.5V, RL= 300Ω, CL= 35pF ns540tBBM
Break-Before-Make Time +25°C
-1 +1+25°C
V+ = 3.6V, VADD = VINH = V+ or 0V µA
-10 +10
I+Power-Supply Current C, E
C, E -50 +50
V+ = 3.6V; VCOM = 3V, 1V
C, E
nA
-25 +25
ICOM(ON)
COM On-Leakage
(Note 6) +25°C-1 +1
MAX4524
MAX4525
DIGITAL I/O
SWITCH DYNAMIC CHARACTERISTICS (Note 6)
POWER SUPPLY
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
_______________________________________________________________________________________ 5
10,000
10
01234 6789510
ON-RESISTANCE vs. VCOM
100
1000
MAX4524/25-01
VCOM (V)
RON (Ω)
V+ = 1.2V
V+ = 2V
V+ = 2.7V
V+ = 3.3V
V+ = 5V V+ = 7.5V
V+ = 10V
130
10
0 1.0 3.0
ON-RESISTANCE vs. VCOM
AND TEMPERATURE
30
90
MAX4524/25-02
VCOM (V)
RON (Ω)
2.0 4.0
70
110
50
5..00.5 2.51.5 3.5 4.5
TA = +85°C
TA = -40°C
TA = 0°C
TA = +70°C
TA = +25°C
0.01
OFF-LEAKAGE
vs. TEMPERATURE
100
MAX4524/25-03
TEMPERATURE (°C)
OFF-LEAKAGE (nA)
1
0.1
10
-50 12525-25 0 7550 100
V+ = 5.5V
COM OFF
NO OFF
1
ON-LEAKAGE
vs. TEMPERATURE
10,000
100,000
MAX4524/25-04
TEMPERATURE (°C)
ON-LEAKAGE (pA)
100
10
1000
-50 12525-25 0 7550 100
V+ = 5.5V
100
0.01
10 1k 10k100 100k
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
0.1
MAX4524/25-07
FREQUENCY (Hz)
THD (%)
1
10
600Ω IN AND OUT
01 3
CHARGE INJECTION vs. VCOM
-2.5
1.5
1.0
0.5
0
MAX4524/25-05
VCOM (V)
Q (pC)
24
-0.5
-1.0
-1.5
-2.0
5
V+ = 5V
V- = 0V
1
SUPPLY CURRENT
vs. TEMPERATURE
100
MAX4524/25-06
TEMPERATURE (°C)
I+, (nA)
10
-50 12525-25 0 7550 100
V+ = 5V
VINH = VA = 0V, 5V
I+
0
-120
0.1 10 1001300
FREQUENCY RESPONSE
-90
-100
-110
MAX4524/25-08
FREQUENCY (MHz)
LOSS (dB)
-70
-80
-50
-60
-20
-30
-40
-10
120
-120
-60
-80
-100
PHASE (DEGREES)
-20
-40
20
0
80
60
40
100
ON LOSS
50Ω IN AND OUT
OFF LOSS
ON PHASE
__________________________________________Typical Operating Characteristics
(V+ = 5V, GND = 0V, TA = +25°C, unless otherwise noted.)
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
6 _______________________________________________________________________________________
0
0.5
1.5
1.0
2.0
2.5
3.0
0324156781011912
LOGIC-LEVEL THRESHOLD vs. V+
MAX4524/25-10
V+ (V)
VINH, VADD_ (V)
Pin Description
MAX4524
Analog Switch Normally Open Input 2—1
FUNCTIONMAX4525
NO2
NAME
NOA Analog Switch “A” Normally Open Input1—
NO3
COMA Analog Switch “A” Common2—
Analog Switch Normally Open Input 3—2
NO1
NCA Analog Switch “A” Normally Closed Input3—
INH
GND Ground. Connect to digital ground (analog signals have no ground reference, but
are limited to V+ and GND).
55
Inhibit. Connect to GND for normal operation. Connect to logic-level high to turn all
switches off.
44
Analog Switch Normally Open Input 1—3
ADDB
ADD Logic-Level Address Input (see Truth Tables)6—
ADDA
NCB Analog Switch “B” Normally Closed Input7—
Logic-Level Address Input (see Truth Tables)—7
Logic-Level Address Input (see Truth Tables)—6
NO0 Analog Switch Normally Open Input 0—8
NOB
COM Analog Switch Common—9
Analog Switch “B” Normally Open Input8—
COMB
V+ Positive Analog and Digital Supply-Voltage Input1010
Analog Switch “A” Common9—
Note: NO_, NC_, and COM_ analog signal pins are identical and interchangeable. Any may be considered an input or output;
signals pass equally well in both directions.
10-11
10-9
10-10
10-6
10-7
10-8
10-5
10-4
10-1
10-2
10-3
1
023145678910
11 12
V+ CURRENT vs. LOGIC LEVEL
MAX4524/25-09
VADD_, VINH (V)
I+ CURRENT
V+ = 12V
V+ = 5V
Typical Operating Characteristics (continued)
(V+ = +5V, GND = 0V, TA= +25°C, unless otherwise noted.)
EP TDFN Package Only. Exposed pad, connect to V+.EPEP
__________Applications Information
Power-Supply Considerations
The MAX4524/MAX4525’s construction is typical of
most CMOS analog switches. They have two supply
pins: V+ and GND. V+ and GND are used to drive the
internal CMOS switches and set the limits of the analog
voltage on any switch. Reverse ESD-protection diodes
are internally connected between each analog signal
pin and both V+ and GND. If any analog signal
exceeds V+ or GND, one of these diodes will conduct.
During normal operation, these (and other) reverse-
biased ESD diodes leak, forming the only current drawn
from V+ or GND.
Virtually all the analog leakage current comes from the
ESD diodes. Although the ESD diodes on a given sig-
nal pin are identical, and therefore fairly well balanced,
they are reverse-biased differently. Each is biased by
either V+ or GND and the analog signal. This means
that leakage will vary as the signal varies. The differ-
ence in the two diode leakages to the V+ and GND
pins constitutes the analog signal-path leakage current.
All analog leakage current flows between each pin and
one of the supply terminals, not to the other switch ter-
minal. This is why both sides of a given switch can
show leakage currents of either the same or opposite
polarity.
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
_______________________________________________________________________________________ 7
______________________________________________Test Circuits/Timing Diagrams
50%
tTRANS
V+
0V
VNO0
VOUT
VADD
0V
90%
90%
tTRANS
50%
tTRANS
V+
0V
VNC
VOUT
VADD
0V
90%
90%
tTRANS
VADD
V+
VOUT
GND
V+
ADDB
ADDA
INH
NO0
NO1–NO2
NO3
COM
V+
MAX4524
300Ω
50Ω
35pF
V+
VOUT
GND
V+
ADD
VADD
INH
NO
NC
COM
V+
MAX4525
300Ω
50Ω
35pF
REPEAT TEST FOR EACH SECTION.
Figure 1. Address Transition Time
MAX4524/MAX4525
There is no connection between the analog signal
paths and GND. V+ and GND power the internal logic
and logic-level translators, and set both the input and
output logic limits. The logic-level translators convert
the logic levels into switched V+ and GND signals to
drive the gates of the analog signals. This drive signal
is the only connection between the logic supplies (and
signals) and the analog supplies. V+ has an ESD-pro-
tection diode to GND.
Low-Voltage Operation
These devices operate from a single supply between
+2V and +12V. At room temperature, they actually
“work” with a single supply at near or below +1.7V,
although as supply voltage decreases, switch on-resis-
tance and switching times become very high.
High-Frequency Performance
In 50Ωsystems, signal response is reasonably flat up
to 50MHz (see Typical Operating Characteristics).
Above 20MHz, the on-response has several minor
peaks, which are highly layout dependent. The problem
is not turning the switch on, but turning it off. The off-
state switch acts like a capacitor, and passes higher
frequencies with less attenuation. At 10MHz, off-isola-
tion is about -50dB in 50Ωsystems, becoming worse
(approximately 20dB per decade) as frequency
increases. Higher circuit impedances also degrade off-
isolation. Adjacent channel attenuation is about 3dB
above that of a bare IC socket, and is entirely due to
capacitive coupling.
Low-Voltage, Single-Supply
Multiplexer and Switch
8 _______________________________________________________________________________________
_________________________________Test Circuits/Timing Diagrams (continued)
50%
tOFF
V+
0V
VNO0
VOUT
VINH
0V
90%
90%
tON
50%
tOFF
V+
0V
VNO_
VOUT
VINH
0V
90%
90%
tON
VINH
VINH
V+
VOUT
GND
V+
ADDB
ADDA
INH
NO0
NO1–NO3
COM
V+
MAX4524
300Ω
50Ω35pF
V+
VOUT
GND
V+
ADD
INH
NO_
NC_
COM_
V+
MAX4525
300Ω
35pF
50Ω
REPEAT TEST FOR EACH SECTION.
Figure 2. Inhibit Switching Times
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
_______________________________________________________________________________________ 9
50%
V+
0V
VCOM
VOUT
VADD
0V
80%
tBBM
V+
VOUT
VOUT
VADD
VADD
GND
V+
ADDB
ADDA
INH
NO0–N03
COM
V+
MAX4524
300Ω
50Ω
35pF
V+
GND
V+
ADD
INH
NO_, NC_
COM_
V+
MAX4525
300Ω
35pF
50Ω
REPEAT TEST FOR EACH SECTION.
tR < 20ns
tF < 20ns
Figure 3. Break-Before-Make Interval
0V
V+
VINH
∆ VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE-
TRANSFER ERROR Q WHEN THE CHANNEL TURNS OFF.
∆ VOUT
REPEAT TEST FOR EACH SECTION.
Q = ∆ VOUT X CL
VOUT
V+
VOUT
VNO = 0V
VINH
GND
V+
ADDB
CHANNEL
SELECT
ADDA
INH
NO_
COM_
MAX4524
MAX4525
50ΩCL
1000pF
_________________________________Test Circuits/Timing Diagrams (continued)
Figure 4. Charge Injection
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
10 ______________________________________________________________________________________
_________________________________Test Circuits/Timing Diagrams (continued)
MEASUREMENTS ARE STANDARDIZED AGAINST SHORT AT SOCKET TERMINALS.
OFF-ISOLATION IS MEASURED BETWEEN COM AND "OFF" NO TERMINAL ON EACH SWITCH.
ON-LOSS IS MEASURED BETWEEN COM AND "ON" NO TERMINAL ON EACH SWITCH.
CROSSTALK (MAX4524) IS MEASURED FROM ONE CHANNEL (A, B) TO OTHER CHANNEL.
SIGNAL DIRECTION THROUGH SWITCH IS REVERSED; WORST VALUES ARE RECORDED.
V+
VOUT
VIN
GND
V+ VIN
VOUT MEAS.
NETWORK
ANALYZER
50Ω50Ω
50ΩOFF ISOLATION = 20log
ON LOSS = 20log
CROSSTALK = 20log
50Ω
REF.
ADDB
VOUT
VIN
VOUT
VIN
ADDA
CHANNEL
SELECT
INH
NO_
COM_
10nF
MAX4524
MAX4525
Figure 5. Off-Isolation, On-Loss, and Crosstalk
V+
GND
V+
ADDB
ADDA
CHANNEL
SELECT
1MHz
CAPACITANCE
ANALYZER
INH
NO_
NO_
COM_
MAX4524
MAX4525
Figure 6. NO/COM Capacitance
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
______________________________________________________________________________________ 11
__________________________________________________________Chip Topographies
TRANSISTOR COUNT: 219
SUBSTRATE CONNECTED TO V+
MAX4524 MAX4525
N.C.
COM
N.C.
NO0
ADDA
NO2 N.C. V+ N.C.
0.069"
(1.75mm)
0.053"
(1.35mm)
N.C. GND N.C. ADDB
N.C.
NO3
NO1
INH
N.C.
COMB
NOB
NCB
N.C.
N.C. N.C. V+ N.C.
0.069"
(1.75mm)
0.053"
(1.35mm)
N.C. GND N.C. ADD
NOA
COMA
NCA
INH
N.C. = No Connection
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
12 ______________________________________________________________________________________
10LUMAX.EPS
PACKAGE OUTLINE, 10L uMAX/uSOP
1
1
21-0061
REV.DOCUMENT CONTROL NO.APPROVAL
PROPRIETARY INFORMATION
TITLE:
TOP VIEW
FRONT VIEW
1
0.498 REF
0.0196 REF
S
6°
SIDE VIEW
α
BOTTOM VIEW
0° 0° 6°
0.037 REF
0.0078
MAX
0.006
0.043
0.118
0.120
0.199
0.0275
0.118
0.0106
0.120
0.0197 BSC
INCHES
1
10
L1
0.0035
0.007
e
c
b
0.187
0.0157
0.114
H
L
E2
DIM
0.116
0.114
0.116
0.002
D2
E1
A1
D1
MIN
-A
0.940 REF
0.500 BSC
0.090
0.177
4.75
2.89
0.40
0.200
0.270
5.05
0.70
3.00
MILLIMETERS
0.05
2.89
2.95
2.95
-
MIN
3.00
3.05
0.15
3.05
MAX
1.10
10
0.6±0.1
0.6±0.1
Ø0.50±0.1
H
4X S
e
D2
D1
b
A2 A
E2
E1 L
L1
c
α
GAGE PLANE
A2 0.030 0.037 0.75 0.95
A1
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
______________________________________________________________________________________ 13
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
6, 8, &10L, DFN THIN.EPS
MAX4524/MAX4525
Low-Voltage, Single-Supply
Multiplexer and Switch
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
14 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2007 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc.
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
COMMON DIMENSIONS
SYMBOL MIN. MAX.
A 0.70 0.80
D 2.90 3.10
E 2.90 3.10
A1 0.00 0.05
L 0.20 0.40
PKG. CODE N D2 E2 e JEDEC SPEC b [(N/2)-1] x e
PACKAGE VARIATIONS
0.25 MIN.k
A2 0.20 REF.
2.00 REF0.25±0.050.50 BSC2.30±0.1010T1033-1
2.40 REF0.20±0.05- - - - 0.40 BSC1.70±0.10 2.30±0.1014T1433-1
1.50±0.10 MO229 / WEED-3
0.40 BSC - - - - 0.20±0.05 2.40 REFT1433-2 14 2.30±0.101.70±0.10
T633-2 6 1.50±0.10 2.30±0.10 0.95 BSC MO229 / WEEA 0.40±0.05 1.90 REF
T833-2 8 1.50±0.10 2.30±0.10 0.65 BSC MO229 / WEEC 0.30±0.05 1.95 REF
T833-3 8 1.50±0.10 2.30±0.10 0.65 BSC MO229 / WEEC 0.30±0.05 1.95 REF
2.30±0.10 MO229 / WEED-3 2.00 REF0.25±0.050.50 BSC1.50±0.1010T1033-2
Revision History
Pages changed at Rev 2: 1, 2, 4, 6, 13,14
