SPEC NO: DSAB1912 REV NO: V.3 DATE:JAN/24/2003 PAGE: 1 OF 4
APPROVED : J. Lu CHECKED:Allen Liu DRAWN:Y.H.LI
Package Dimensions
2.7x1.2mm SMD CHIP LED LAMP
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
Features
!2.7mmx1.2mm SMT LED,1.3mm THICKNESS.
!LOW POWER CONSUMPTION.
!WIDE VIEWING ANGLE.
!IDEAL FOR BACKLIGHT AND INDICATOR.
!VARIOUS COLORS AND LENS TYPES
AVAILABLE.
!PACKAGE :2000PCS / REEL.
KPE-2712SEC SUPER BRIGHT ORANGE
Description
The Super Bright Orange source color devices are
made with DH InGaAlP on GaAs substrate Light
Emitting Diode.
SPEC NO: DSAB1912 REV NO: V.3 DATE:JAN/24/2003 PAGE: 2 OF 4
APPROVED : J. Lu CHECKED:Allen Liu DRAWN:Y.H.LI
Electrical / Optical Characteristics at T)=25°°
°°
°C
Absolute Maximum Ratings at T)=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Selection Guide
retemaraPretemaraP retemaraP retemaraPretemaraP egnarOthgirBrepuSegnarOthgirBrepuS egnarOthgirBrepuS egnarOthgirBrepuSegnarOthgirBrepuSstinUstinU stinU stinUstinU
noitapissidrewoP 57Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 591Am
egatloVesreveR 5V
erutarepmeTegarotS/gnitarepO 04- °58+oTC °C
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePegnarOthgirBrepuS016mnI
F
Am02=
λDhtgnelevaWetanimoDegnarOthgirBrepuS106mnI
F
Am02=
λ∆ 2/1 htdiw-flaHeniLlartcepSegnarOthgirBrepuS92mnI
F
Am02=
CecnaticapaCegnarOthgirBrepuS03FpV
F
zHM1=f;V0=
V
F
egatloVdrawroFegnarOthgirBrepuS0.25.2VI
F
Am02=
I
R
tnerruCesreveRegnarOthgirBrepuS01AuV
R
V5=
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL
)dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI
Am02@
gniweiVgniweiV gniweiV gniweiVgniweiV
elgnA
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT 2/1θ22/1θ2 2/1θ2 2/1θ22/1θ2
CES2172-EPK)PlAaGnI(EGNAROTHGIRBREPUSRAELCRETAW011052°021
SPEC NO: DSAB1912 REV NO: V.3 DATE:JAN/24/2003 PAGE: 3 OF 4
APPROVED : J. Lu CHECKED:Allen Liu DRAWN:Y.H.LI
Super Bright Orange KPE-2712SEC
SPEC NO: DSAB1912 REV NO: V.3 DATE:JAN/24/2003 PAGE: 4 OF 4
APPROVED : J. Lu CHECKED:Allen Liu DRAWN:Y.H.LI
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
KPE-2712SEC
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
