G3TA-ODX02S-12VDC - Omron

Relay I/O Block G7TC

Reduces Wiring within the Control

Panel and Reduces Installation Time

1Compact 16-pt models: 182 W l85 D

l68 H mm; 8-pt block width is 102 mm

1Can be connected to the PLC with a

connecting cable and a snap-in

connector

1Equipped with surge suppressor circuit

and LED indicators

1Mounts easily on a DIN rail

èò

Ordering Information

3G7TC RELAY I/O BLOCKS

Relay I/O Blocks include the I/O Base with G7T Relays installed.

I/O classification I/O points Internal I/O circuit common Rated coil voltage Part number

Input 16 NPN (Œcommon) 24 VDC G7TC-ID16 DC24V

(

)

G7TC-ID16-5 DC24V (See Note 1)

NPN (Œcommon) 110/120 VAC G7TC-IA16 AC110/120V

(

)

G7TC-IA16-5 AC100/110V (See Note 1)

220/240 VAC G7TC-IA16 AC220/240V

Output

(

)

16 NPN (⊕common) 12 VDC G7TC-OC16 DC12V

(See Note 2)

(

)

24 VDC G7TC-OC16 DC24V

PNP (Œcommon) 24 VDC G7TC-OC16-1 DC24V

8NPN (⊕common) 12 VDC G7TC-OC08 DC12V

(

)

24 VDC G7TC-OC08 DC24V

PNP (Œcommon) 24 VDC G7TC-OC08-1 DC24V

Note: 1. The “-5” Block is for use with DRT1-ID16X DeviceNet Remote Adapter.

2. Output relays are rated up to 250 VAC. See “Specifications” for specific relay ratings.

3P7TF BLOCK BASES AND RELAYS

Combine Relays and P7TF Block Bases to match your application requirements. Use the table below to configure Relay Blocks.

I/O points Internal I/O

Part number

circuit Block Base I/O Relay Solid State Relay

16 inputs

(

)

NPN (-- common) P7TF-IS16 AC110/120V 1A G7T-1122S AC110/120 or 25 mA G3TA-IAZR02S AC100/240V

(AC coil)

(

)

G7T-1122S AC200/220V

16 inputs

(DC coil) NPN (-- common) P7TF-IS16 DC24V 1A G7T-1122S DC24V 25 mA G3TA-IDZR02S DC5-24V

16 outputs

(

)

NPN (+ common) P7TF-OS16 DC12V 5A G7T-1112S DC12V 2A G3TA-ODX02S 12VDC

(DC coil) NPN (+ common) P7TF-OS16 DC24V 5A G7T-1112S DC24V 2A G3TA-ODX02S DC24V or

PNP (-- common) P7TF-OS16-1 DC24V 5A G7T-1112S DC24V 1A G3TA-OD201S DC24V

8 outputs

(

)

NPN (+ common) P7TF-OS08 DC12V 5A G7T-1112S DC12V 2A G3TA-ODX02S 12VDC

(DC coil) NPN (+ common) P7TF-OS08 DC24V 5A G7T-1112S DC24V 2A G3TA-ODX02S DC24V or

PNP (-- common) P7TF-OS08-1 DC24V 5A G7T-1112S DC24V 1A G3TA-OD201S DC24V

G7TC G7TC

1. Input/Output Classification

I : For input

O:For output

2. Type of I/O Signal

A :AC coil type for input relays mounted

D:DC coil type for input relays mounted

C:Contact output

3. Number of I/O Points

16: 16 points

08: 8 points (for output only)

4. Internal I/O Circuit Common

Blank:NPN (+) common

1: PNP (--) common

5. Block for use with DeviceNet

G7TC- -

123 4 1. Input/Output Classification

I : For input

O:For output

2. Type of I/O Signal

S :Socket for input or output relays

3. Number of I/O Points

16: 16 points

08: 8 points (for output only)

4. Internal I/O Circuit Common

Blank: NPN (+) common

1: PNP (--) common

P7TF- -

123 4

3CONNECTOR CABLES

Item Length Part number

Connecting cable

1.0 m (3.28 ft) G79-Y100C

with crimp

1.5 m (4.92 ft) G79-Y150C

ype

s2.0 m (6.56 ft) G79-Y200C

3.0 m (9.84 ft) G79-Y300C

5.0 m (16.40 ft) G79-Y500C

Connecting cable

1.0 m (3.28 ft) G79-100C

with connector

1.5 m (4.92 ft) G79-150C

s2.0 m (6.56 ft) G79-200C

3.0 m (9.84 ft) G79-300C

5.0 m (16.40 ft) G79-500C

3ACCESSORIES (ORDER SEPARATELY)

Description Part number

Single I/O socket for SPST and SPDT Relays P7TF-05

(

)

cator mo

(

var

stor surge suppress

)

Indicator module for DC (with diode surge suppression) P70D

Output short circuit protection module G77-5

Shorting bar G78-04

nger protect

on cover

-pt

Specifications

3RATINGS: G7T RELAYS

Coil Data (Common to Input/Output per Relay)

Rated voltage

(V) Rated current (mA) Coil

resistance

(

)

Must

operate Must

release Maximum

voltage Power consumption

(

)

50 Hz 60 Hz

(See Note 1) Percent of rated voltage per Relay per 16 Relays

AC 110/120

220/240 7.5/—

3.7/— 6.4/7.0

3.2/3.5 13,000 Ω

48,300 Ω80% max. 30% min. 110% 0.7 VA 11 VA

DC 12 42 290 Ω80% max. 10% min. 110% 0.5 W 8W

DC 24 21 1,150 Ω80% max. 10% min. 110% 0.5 W 8W

Note: 1. The rated current and coil resistance are measured at a coil temperature of +23°C with a tolerance of +15%/--20% for AC rated

current and ±15% for coil resistance.

2. Approx. 4 mA flows into each LED indicator. To calculate the power supply capacity, add the current value of each indicator.

G7TC G7TC

Contact Data (G7T I/O Relay)

Classification For input For output

Load type Resistive load (cosϕ=1) Inductive load

(cosϕ=0.4 L/R=7 ms) Resistive load (cosϕ=1) Inductive load

(cosϕ=0.4 L/R=7 ms)

Carry current 1A 5A

Switching voltage 250 VAC, 125 VDC

Switching current 1A 0.5 A 5A 2A

Switching power DC 24 W DC 12 W DC 120 W

AC 440 VA DC 48 W

AC 220 VA

Min. permissible load 100 µAat1V 10 mA at 5 V

Electrical life 10,000,000 operations

(at 10 mA)

50,000 operations

(at 1 A)

2,500,000 operations

(at 10 mA)

20,000 operations

(at 1 A)

1,000,000 operations (under rated load)

Mechanical life 50,000,000 operations

3CHARACTERISTICS: G7T RELAYS

Model G7TC-IA16

(Input, AC coil) G7TC-ID16

(Input, DC coil) G7TC-OC16 (-1)

(Output, DC coil) G7TC-OC08 (-1)

(Output, DC coil)

LED color Red Green Green

Case color Transparent red Transparent green Transparent

Contact resistance 50 mΩmax.

Operate time 15 ms max.

Release time 15 ms max.

Max. operating

Mechanical limit 18,000 operations/hour

frequency At rated load 1,800 operations/hour

Insulation resistance 100 MΩat 500 VDC

Dielectric

Between coil and contact 2,000 VAC, 50/60 Hz for 1 minute

strength Between same polarity

contacts 1,000 VAC, 50/60 Hz for 1 minute

Between paired connectors 250 VAC, 50/60 Hz for 1 minute

Malfunction vibration 10 to 55 Hz with 1.0-mm double amplitude

Malfunction shock 200 m/s2

Noise immunity Noise level: 1.5 kV; pulse width: 100 ns to 1 µs

Rated voltage between positive and negative

terminal blocks Rated voltage of controller’s (PLC or

other) input circuit 24 VDC ±5%

Rated current between positive and negative

terminal blocks Input circuit current of controller (PLC or

other) x number of ON points 24 VDC: 25 mA x number of ON points

Cable length To controller 5 m max. (reference value)

To I/O devices 50 m max. (reference value, for 2-mm2

CVV cable) Dependent on load

Ambient operating temperature 0°Cto55

°C(32

°F to 131°F)

Ambient operating humidity 35% to 85%

I/O terminal tightening torque 8to12kg:cm

Coil surge absorber Variable resistor Diode (1 A, 400 V)

Weight Approx. 640 g Approx. 630 g Approx. 670 g Approx. 350 g

G7TC G7TC

UL and CSA Standards

StandardG7TCI/OBlocks,exceptfortheG7TC-OC16-1andtheG7TC-OC08(-1),havemetULandCSAstandards(ULfileno.E41643;CSA

file no. LR31928).

Note that the following UL- and CSA-qualifying ratings differ from the performance characteristics of the individual models:

Part number Coil ratings Contact ratings

G7TC-ID16, G7TC-IA16 10 mA/point, 24 VDC 250 VAC max.

G7TC-OC16 Coil drive current, 24 VDC Inductive load: 10 A, 250 VAC

Resistive load: 10 A, 30 VDC

Rated horsepower: 1/2 HP, 240 VAC

3RATINGS: G3TA SOLID STATE RELAYS

Input Relay

Coil Data

Part number Rated voltage Operating

Input current Voltage level

voltage Must operate

voltage Must release

voltage

G3TA-IAZR02S AC100/240V 100 to 240 VAC 80 to 264 VDC 5mAmax. 80 VAC max. 10 VAC min.

G3TA-IDZR02S DC5-24V 5to24VDC 4to32VDC 4VDCmax. 1VDCmin.

Contact Data

Part number Logic level supply

voltage Output breakdown

voltage Output current Output current

(load current)

G3TA-IAZR02S AC100/240V 4to32VDC 32 VDC max. 25 mA max. 0.1to25mA

G3TA-IDZR02S DC5-24V

Output Relay

Coil Data

Part number Rated voltage Operating

Input

Voltage level

voltage

impedance Must operate

voltage Must release

voltage

G3TA-OA202SZ DC12V 12 VDC 9.6 to 13.2 VDC 0.9 kΩ±20% 9.6 VDC max. 2VDCmin.

G3TA-OA202SZ DC24V 24 VDC 19.2 to 26.4 VDC 1.7 kΩ±20% 19.2 VDC max.

G3TA-ODX02S DC24V 12 VDC 9.6 to 13.2 VDC 3.5 kΩ±20% 9.6 VDC max.

24 VDC 19.2 to 26.4 VDC 6.5 kΩ±20% 19.2 VDC max.

G3TA-OD201S DC24V 24 VDC 19.2 to 26.4 VDC 6.4 kΩ±20% 19.2 VDC max.

Contact Data

Part number Applicable load

Rated load voltage Load voltage Load current

(See Note) Inrush current

G3TA-OA202SZ 100 to 240 VAC 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle)

G3TA-OA202SL 100 to 240 VAC 75 to 264 VAC

G3TA-ODX02S 5to48VDC 4to60VDC 0.01 to 2 A 12 A (10 ms)

G3TA-OD201S 48 to 200 VDC 40 to 200 VDC 0.01 to 1 A 6A(10ms)

Note: The minimum current value is measured at 10°Cmin.

G7TC G7TC

3CHARACTERISTICS: G3TA SOLID STATE RELAYS

Input Relay

Item G3TA-IAZR02S G3TA-IDZR02S

Operate time 20 ms max. 0.5 ms max.

Release time 20 ms max. 0.5 ms max.

Output ON voltage drop 1.6 V max.

Leakage current 5µAmax.

Insulation resistance 100 MΩmin. at 500 VDC

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output

Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance Malfunction: 1,000 m/s2(approx. 100G)

Ambient temperature Operating: --30°Cto80

°C(--22

°F to 176°F) with no icing or condensation

Storage: --30°C to 100°C(--22

°F to 212°F) with no icing or condensation

Ambient humidity Operating: 45% to 85%

Approved standards UL508 file No. E64562/CSA C22.2 (No. 0, No. 14) file No. LR35535

Weight Approx. 16 g

Output Relay

Item G3TA-OA202SZ G3TA-ODX02S G3TA-OD201S

Operate time 1/2 of load power source cycle

+ 1 ms max. 0.5 ms max. 2msmax.

Release time 1/2 of load power source cycle

+ 1 ms max. 2msmax. 2msmax.

Output ON voltage drop 1.6 V max. 2.5 V max.

Leakage current 5 mA max. at 200 VAC 1mAmax.

Insulation resistance 100 MΩmin. at 500 VDC

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output

Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance Malfunction: 1,000 m/s2(approx. 100G)

Ambient temperature Operating: --30°Cto80

°C(--22

°F to 176°F) with no icing or condensation

Storage: --30°C to 100°C(--22

°F to 212°F) with no icing or condensation

Ambient humidity Operating: 45% to 85%

Approved standards UL508 file No. E64562, CSA C22.2 (No. 14) file No. LR3553

Weight Approx. 23 g

3MIXING G3TA WITH G7T RELAYS IN THE SAME I/O BLOCK

With up to four G3TA SSRs mounted before

G7T Relays, 2-A loads can be switched. With G3TA SSRs mounted before every other

G7T Relays, 2-A loads can be switched.

G3TA G7T G3TA G7T

G7TC G7TC

Engineering Data

3G7T RELAYS

3G3TA SOLID STATE RELAYS

Load Current vs. Ambient Temperature Characteristics

G3TA-OA202SZ/OA202SL/ODX02S

Ambient temperature (°C) Ambient temperature (°C)

Load current (A)

G3TA-OD201S

Single-point mounting

16-point mounting

Single-point mounting

16-point mounting

Inrush Current

Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)

G3TA-ODX02S G3TA-OD201S

Inrush current (A. Peak)

Energizing time (ms)

Inrush current (A. Peak)

Energizing time (ms)

Inrush current (A. Peak)

Energizing time (ms)

G3TA-OA202SZ

G7TC G7TC

Operation

3G3TA SOLID STATE RELAYS

Circuit Configuration

Type Part number Case color Indicator Circuit

AC output G3TA-OA202SZ

(withzerocross

function)

G3TA-OA202SL

(without zero cross

function)

Black Yes Constant-cur-

rent circuit Zero cross

circuit Drive circuit

DC output G3TA-ODX02S

G3TA-OD201S Black Yes Constant-cur-

rent circuit Amplification

circuit

AC input G3TA-IAZR02S Red Yes Amplification

circuit

Constant-cur-

rent circuit

Rectifica-

tion circuit

DC input G3TA-IDZR02S Green Yes Amplification

G3TA-IDZR02SM No

circuit

Constant-cur-

rent circuit

External Connections (Bottom View)

G3TA-IAZR02S G3TA-IDZR02S/IDZR02SM

G3TA-OA G3TA-OD

-- 5

Output Output

Load

Load power supply

-- 5

Load

Load power supply

G7TC G7TC

Dimensions

Unit: mm (inch)

3G7TC RELAY I/O BLOCKS

I/O Block for NPN Input (Œ

ŒŒ

Œcommon)

(3.35)

182 (7.17) 68 (2.68)

G7TC-ID16

G7TC-IA16

Terminal Arrangement/Internal Connection

G7TC-ID16 (-5)

(See Note)

Note: When the product has a “-5” at the end of the part number, connector pin number 9 and 19 are negative and connector number

10 and 20 are positive.

G7TC G7TC

G7TC-IA16 (-5)

(See Note)

Note: When the product has a “-5” at the end of the part number, connector pin number 9 and 19 are negative and connector pin num-

ber 10 and 20 are positive.

I/O Block for Output

G7TC-OC16 (NPN output/⊕

⊕⊕

⊕common)

G7TC-OC16-1 (PNP output/Œ

ŒŒ

Œcommon)

G7TC-OC8 (NPN output/⊕

⊕⊕

⊕common)

G7TC-OC8-1 (PNP output/Œ

ŒŒ

Œcommon)

(3.35)

182 (7.17) 16 pts

102 (4.02) 8 pts 68

(2.68)

G7TC G7TC

Terminal Arrangement/Internal Connection

G7TC-OC16

A controller with an NPN transistor, common output can be connected to the G7TC-OC16.

G7TC-OC16-1 (PNP output/Œ

ŒŒ

Œcommon)

A controller with a PNP transistor, common output can be connected to the G7TC-OC16-1. Do not connect the G71 Remote Interface

to the G7TC-OC16-1. Due to the difference in polarity, the G71 will be damaged if the G7TC-OC16-1 and the G71 are connected to

each other. Use the G7TC-OC16 (NPN output/⊕common) instead, to connect to the G71.

Terminal Arrangement/Internal Connection

G7TC G7TC

G7TC-OC08

A controller with an NPN transistor, common output can be connected to the G7TC-OC08.

G7TC-OC08-1 (PNP output/Œ

ŒŒ

Œcommon)

A controller with a PNP transistor, common output can be connected to the G7TC-OC08-1. Do not connect the G7TC-OC08-1 with the

G71. Due to the difference in polarity, the G71 will be damaged if the G7TC-OC08-1 and the G71 are connected to each other. Use the

G7TC-OC08 (NPN output/⊕common) instead, to connect to the G71.

Connector Pin Configuration

Top View

Note: Pin numbers are indicated for convenience. The ?markcanbeusedto

determine orientation.

G7TC G7TC

3G7T RELAY

Unit: mm (inch)

SPST-NO Type

G7T-1122S (for input)

G7T-1112S (for output)

32 max.

39 max.

(1.54)

29 max.

10 max.

(0.39)

Four 1-dia. holes

Terminal Arrangement/

Internal Connections

(Bottom View)

SPST-NC Type

G7T-1012S (for output)

32 max.

29 max.

Four 1-dia. holes

Terminal Arrangement/

Internal Connections

(Bottom View)

3.15

(0.12)

0.5

2.4

1.6

4 (0.16)

10 max.

(0.39)

33.5 max.

(1.32)

3.15

(0.12)

10 max.

(0.39)

33.5 max.

(1.32)

0.52.4

1.6

39 max.

(1.54) 15

4 (0.16)

10 max.

(0.39)

3G3TA SOLID STATE RELAYS

28.4

31.7 24

7.1 7.5 9 6

35.5 max (1.40)

39 max.

(1.54)

10 max.

(0.39)

G7TC G7TC

Unit: mm (inch)

3P7TF BLOCK BASES

For Input (NPN, Œ

ŒŒ

ŒCommon)

P7TF-IS16

32.5

26 34

810

M3.5 35.3+0.2

182 (7.17)

(3.35)

68 (2.68)

For Output (NPN, ⊕

⊕⊕

⊕Common)

P7TF-OS16

810

M3.5

32.5

35.3+0.2

182 (7.17)

(3.35)

68 (2.68)

For Output (PNP, Œ

ŒŒ

ŒCommon)

P7TF-OS08

32.5

M3.5

810

35.3+0.2

P7TF-05

Five, M3.5 x 8

Square washer faced screw

68 (2.68)

(3.35)

102 (4.02)

71.5 max.

(2.81)

59 max. (2.32)

19 max.

(0.75)

G7TC G7TC

G7TC Internal I/O Circuit Common

PNP Output

(Output Only)

Input

PLC PLC

NPN

Output

PLCG7TC G7TC G7TC

Accessories (Order Separately)

3G79 CONNECTING CABLES

G79 Connecting Cable with Crimp-type Hooks

Use these convenient Cables to connect relay I/O Blocks to devices equipped with screw terminals. Power line capacity must be within 50

mA per I/O point. Always check driver capacity and I/O relay power consumption when using an Output Block. Hoods are labeled with

corresponding connector pin numbers. Connect hooks 9 and 19 and hooks 10 and 20 together when using the G7TC-OC08.

Length (ç)Part number

1,000 mm G79-Y100C

1,500 mm G79-Y150C

2,000 mm G79-Y200C

3,000 mm G79-Y300C

5,000 mm G79-Y500C

G79 Connecting Cable with One-to-One Connector

This Cable is convenient for connecting a Relay I/O Block to a single device equipped with one connector socket.

Length (ç)Part number

1,000 mm G79-100C

1,500 mm G79-150C

2,000 mm G79-200C

3,000 mm G79-300C

5,000 mm G79-500C

G7TC G7TC

3G7TC TO PLC MODULE CONNECTION OPTIONS

One-to-One Connections: (16 Points per Cable)

The connecting cables with crimp hooks allow G7TC and P7TF blocks to be used with PLCs from all manufacturers.

Relay block Omron PLC module Connection method to PLC Connecting cable

Inputs

G7TC-1A16

G7TC-ID16

P7TF-IS16

3G2A5-ID213 (16 pts)

3G2A5-IM211 (16 pts)

C200H-ID212 (16 pts)

C200H-IM212 (16 pts)

CQM1-ID212 (16 pts)

Crimp hooks G79-Y___C

C500-MD211CN (input side only)

C200H-MD215 (input side only)

C200H-ID215 (32 pts)

One-to-one connector G79-___C

G79-___C(2)

Outputs

G7TC-OC16

P7TF-OS16 3G2A5-OC221 (16 pts)

3G2A5-OC223 (16 pts)

3G2A5-OD215 (16 pts)

3G2A5-OD411 (16 pts)

C200H-OC225 (16 pts)

C200H-OD212 (16 pts)

CQM1-OC222 (16 pts)

CQM1-OD212 (16 pts)

Crimp hooks G79-Y___C

C500-OD415CN (16 pts)

C500-MD211CN (output side only)

C200H-MD115 (output side only)

C200H-MD215 (output side only)

C200H-OD215 (16 pts)

One-to-one connector G79-___C

One-to-Two Connections: (Cable Splits One Connector to Two Relay Blocks)

Relay block PLC module Connection method to PLC Connecting cable

Inputs

G7TC-1A16

G7TC-ID16

P7TF-IS16

3G2A5-ID219 (64 pts)

C500-ID114 (64 pts)

C500-ID218CN (32 pts)

C200H-ID216 (32 pts)

C200H-ID217 (64 pts)

CQM1-ID213 (32 pts)

Special cable that splits a single

connector at the PLC to two at the

relay blocks

G79-I___C___

(2 are required for 64-pt

modules)

Outputs

G7TC-OC16

P7TF-OS16 3G2A5-OD213 (64 pts)

C500-OD218 (32 pts)

C500-OD415CN (32 pts)

C200H-OD218 (32 pts)

CQM1-OD219 (64 pts)

Special cable that splits a single

connector at the PLC to two at the

relay blocks

G79-O___C___

(2 are required for 64-pt

modules)

High-density Connections (Cable Splits One Connector to Three Relay Blocks)

Relay block PLC module Connection method to PLC Connecting cable

Inputs

G7TC-IA16

G7TC-ID16

P7TF-IS16

CS1W-ID291 (96 pts)

CS1W-MD291 (48 pts, input side only) Special cable that splits a single

connector at the PLC to three at

the relay blocks

G79-___C-___-___

(2 are required for 96-pt

modules)

Outputs

G7TC-OC16

P7TF-OS16 CS1W-OD219 (96 pts)

CS1W-MD291 (48 pts, output side only) Special cable that splits a single

connector at the PLC to three at

the relay blocks

G79-___C-___-___

(2 are required for 96-pt

modules)

G7TC G7TC

Unit: mm (inch)

3SHORTING BAR

Use this piece for short-circuiting across terminals.

Max. current flow: 20 A

13.3

(0.52)12.5 4.5

37.8

(1.49)

R1.8 10 0.05 0.05 0.051010 2.5

R1.0

(0.10)

G78-04

Item Part number

Shorting bar G78-04

3FINGER PROTECTION COVER FOR G7TC OR P7TF (MEETS VDE 0106 PART 100)

G78-E

This cover is for 16-point relay blocks only and cannot be used with an 8-point relay block.

178 (7.01)

(1.06)

10 10 10

12.5

14.5

12.5

6.30 dia.

12.5

26.35

(1.04) 13.85

7.5

G7TC G7TC

I/O Block Details

3INPUT BLOCKS

G7TC-ID16

G7TC-IA16

Supply power to terminals 0 through

15 and C0 through C15 according to

the voltage specifications of the I/O

Relays and I/O Block. Do not reverse

positive and negative terminals on the

DC Input Block (0 through 15 are

positive; C0 through C15, negative).

Shorting bars are available.

Supply to the power terminal (positive

and negative) the rated voltage of the

controller’s input circuits (24, 12). Use

a low-noise power source.

3OUTPUT BLOCKS

G7TC-OC16(-1)

G7TC-OC08(-1)

Supply power to contact output

terminals 0 through 15 and C0 through

C15 according to the requirements of

the loads. A 4 terminal Shorting Bar is

available.

Supply to the power terminals (positive

and negative) power both for driving

the relays and for controller output

transistors. Match the controller and

I/O block voltage specifications. Use a

low-noise power source.

Output Block model G7TC-OC08 does

not have terminals 8 through 15 and

C8 through C15. Although a 20-pin

connector is used, pins 11 through 18

are not connected.

G7TC G7TC

To Increase the Number of Outputs

Use sockets (order separately) to increase the number of outputs or to use SPDT I/O Relays on the G7TC.

3EXTERNAL CONNECTION EXAMPLE

The following is an application example for the P7TF-05 using a SPDT Relay on a terminal of the G7TC-16(-1).

*Use the G77-S Output Short-Circuit Module in

place of the G7T I/O Relay. With the G77-S

voltage output is available between terminals 15

and C15. The maximum current is determined

according to the controller.

Note: If more than one G77-S Output Short-Circuit Module is employed, the voltage output of the terminals on the G7TC

is as follows:

G7TC-OS16: The positive side (the lower row) connects to the common line internally.

G7TC-OS16-1: The negative side (the upper row) connects to the common line internally.

3P7TF-05 SOCKET

The G7T Relays (SPST-NO, SPST-NC, and SPDT types) and the G3TA I/O Relays can be mounted on the P7TF-05 Socket.

To add SPDT relays (G7T-112S) to a G7TC or P7TF installation, use the G77-S Output Short-Circuit Module and the P7TF-05 Socket.

Specifications

Contact resistance 10 mΩmax.

Dielectric strength 2,000 VAC for 1 minute

Insulation resistance 100 MΩat 500 V

Vibration 10 to 55 Hz, 1.0 mm double

amplitude

Shock 200 m/s2

Ambient temperature Operating: 0 to 55°C

(32°F to 131°F)

Humidity 35% to 85%

Weight Approx. 28 g

G7TC G7TC

Unit: mm (inch)

Dimensions

Note: Terminal 1 is positive when the I/O SSR is employed.

Internal Connections

(Top View)

19 max.

71.5 max.

(2.81)

59 max.

(2.32)

19.5

(0.75)

3P70 INDICATOR MODULE (WITH SURGE SUPPRESSING FUNCTION)

Remove the transparent style strip of the P7TF-05 socket and mount this module and it will function as an operation indicator with the

surge suppression.

Part number Applicable relay coil voltage Remarks

For AC relay P70A 110/120 VAC Surge suppressing system with varistor

220/240 VAC

For DC relay P70D 12/24 VDC Surge suppressing system with diode

Note: 1. Order the indicator module suitable for the relay coil voltage.

2. The indicator module for DC relays has a multiple power supply common to both 12 and 24 VDC.

Dimensions

Internal Connection

29.5 max.

(1.16)

32.5 max.

39 max.

20 0.5

1.6

2.6

8.5 max.

Two 1 dia. holes

(1.54)

(0.33)

G7TC G7TC

Unit: mm (inch)

3G77-S OUTPUT SHORT-CIRCUIT MODULE

The output of the I/O Block can be obtained without relays through the G77-S Output Short-Circuit Module. Note that the G77-S Output

Short-Circuit Module is not available for inputs.

Terminal Arrangement/Internal

Connections (Bottom View)

32 max.

3.15

(0.12)

0.5

2.4

1.6

39 max.

(1.54) 15

29 max.

33.5 max.

(1.32)

10 max.

(0.39)

10 max. (0.39)

Precautions

3CORRECT INSTALLATION

I/O Blocks are color coded, as shown below, according to

input/output and AC/DC specifications.

Block type I/O Terminal

label I/O Terminal

indicators I/O Relay

case

Output Block

(DC) Yellow Green Transparent

Input

DC Red Green Green

Block AC Red Red Red

Both Input and Output Blocks do not have internal power

supplies. For an Output Block, supply the relay drive power to the

positive and negative terminals (either 12 or 24 VDC). Loads

(terminal contacts 0 through 15) must also be supplied with

appropriate power. For an Input Block, supply power to the

positive and negative terminals for the input signals to the

controller.

The same Connecting Cable, G79-Y, is used for the G7TC-OC08

eight-point Output Block as for other I/O Blocks; leave 8 points

unconnected.

LEDs indicate the presence or absence of signals. Use the

display lever inside each relay for fault diagnosis. (Some relays

do not have this lever, depending on the specifications.)

Each relay must be pressed down until its hold-down hooks

engage completely. Heating or malfunction can result if relays are

not mounted properly.

Unlabeled terminals are not electrically connected. Use these for

repeater terminals.

LED positions and relay orientation differ between Input and

Output Blocks. This is to aid in differentiating Input Blocks from

Output Blocks and in following signal flow. DC I/O Blocks have

positive and negative terminals, with the positive terminals

normally on the top of the I/O Block. Reversing positive and

negative terminals will prevent operation.

Rails are generally used to mount Relay I/O Blocks. For screw

mounting, a 210-mm DIN rail is available that can be used as an

adapter in combination with End Plates (PFP-M, two required).

3USING A SHORTING BAR

A Shorting Bar is provided to connect four terminals. The current

capacity of the shorting bar is 20 A. As long as this current

capacity is not exceeded, the shorting bar can be used in

combination as shown at the right to connect more than four

terminals.

Operational errors can result if connectors are connected or re-

moved with power supplied to the I/O Block.

G7TC G7TC

Cat. No. GC RIO-1 04/00 Specifications subject to change without notice. Printed in U.S.A.

OMRON ELECTRONICS, INC.

OneEastCommerceDrive

Schaumburg, IL 60173

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V

416-286-6465