DS30BA101 www.ti.com SNLS403A - FEBRUARY 2012 - REVISED APRIL 2013 DS30BA101 3.125 Gbps Differential Buffer Check for Samples: DS30BA101 FEATURES DESCRIPTION * * * * The DS30BA101 is a high-speed differential buffer for cable driving, signal buffering, and signal repeating applications. Its fully differential signal path ensures exceptional signal integrity and noise immunity. The DS30BA101 drives both differential and single-ended transmission lines at data rates up to 3.125 Gbps. 1 2 Data Rates from DC to 3.125 Gbps Supports SD and HD Video Resolutions Power Consumption: 165 mW Typical Industrial Temperature Range: -40C to +85C APPLICATIONS * * * Cable Extension Signal Buffering and Repeating Security and Surveillance The output voltage amplitude is adjustable via a single external resistor for cable driving applications into 75 single-ended and 100 differential mode impedances. The DS30BA101 is powered from a single 3.3V supply and consumes 165 mW (typical). It operates over the full industrial temperature range of -40C to +85C and is available in a 4 x 4 mm 16-pin WQFN package. 150 Mbps to 3.125 Gbps 100: Differential Cable or 75: Coaxial Cable DS30BA101 DS30EA101 Max Cable Loss ~ 50 dB @ 1.5 GHz Deserializer Serializer Typical Application 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 2012-2013, Texas Instruments Incorporated DS30BA101 SNLS403A - FEBRUARY 2012 - REVISED APRIL 2013 www.ti.com VEE 3 RVO 4 NC NC NC 13 DS30BA101 (top view) 5 6 7 8 NC 2 14 NC IN- 15 VCC 1 16 NC IN+ NC Connection Diagram 12 OUT+ 11 OUT- 10 VEE 9 VCC DAP = VEE The exposed die attach pad is a negative electrical terminal for this device. It should be connected to the negative power supply voltage. Figure 1. 16-Pin WQFN Package See Package Number RUM0016A PIN DESCRIPTIONS Pin Name I/O, Type Description 1 IN+ I, CML Non-inverting input. 2 IN- I, CML Inverting input. 3 VEE Ground Negative power supply (ground). 4 RVO I, Analog Output voltage level control. Connect a resistor between this pin and VCC to set the output voltage. 5 NC N/A No connect. Not bonded internally. 6 VCC Power Positive power supply (+3.3V). 7 NC N/A No connect. Not bonded internally. 8 NC N/A No connect. Not bonded internally. 9 VCC Power Positive power supply (+3.3V). 10 VEE Ground Negative power supply (ground). 11 OUT- O, Data Inverting output. 12 OUT+ O, Data Non-inverting output. 13 NC N/A No connect. Not bonded internally. 14 NC N/A No connect. Not bonded internally. 15 NC N/A No connect. Not bonded internally. 16 NC N/A No connect. Not bonded internally. DAP VEE Ground Connect exposed DAP to negative power supply (ground). These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright (c) 2012-2013, Texas Instruments Incorporated Product Folder Links: DS30BA101 DS30BA101 www.ti.com SNLS403A - FEBRUARY 2012 - REVISED APRIL 2013 Absolute Maximum Ratings (1) Supply Voltage: 3.6V -0.3V to VCC+0.3V Input Voltage (all inputs) Output Current 28 mA -65C to +150C Storage Temperature Range Junction Temperature +125C Package Thermal Resistance JA 16-pin WQFN JC 16-pin WQFN +58C/W +21C/W ESD Rating (HBM) 4.5 kV ESD Rating (MM) 250V 2 kV ESD Rating (CDM) (1) "Absolute Maximum Ratings" indicate limits beyond which damage to the device my occur, including inoperability and degradation of device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. Recommended Operating Conditions Supply Voltage (VCC): 3.3V 5% Operating Free Air Temperature (TA) -40C to +85C DC Electrical Characteristics Over recommended supply voltage and operating temperature ranges, unless otherwise specified. Parameter VICM Input Common Mode Voltage VID Input Voltage Swing VOCM Output Common Mode Voltage VOUT Output Voltage ICC (1) (2) Test Conditions Reference Min IN+, IN- (1) (2) Typ 1.1 + VID/2 Differential 100 OUT+, OUT- Max Units VCC - VID/2 V 2200 mVP-P VCC - VOUT V Single-ended, 75 load, RVO = 750 800 mVP-P Single-ended, 50 load, RVO = 953 400 mVP-P Supply Current 50 59 mA The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not ensured. Typical values represent most likely parametric norms at VCC = +3.3V, TA = +25C, and at the Recommended Operating Conditions at the time of product characterization and are not ensured. AC Electrical Characteristics Over recommended supply voltage and operating temperature ranges, unless otherwise specified. Parameter DRIN tTLH Transition Time Low to High tTHL Transition Time High to Low (1) (2) (3) Test Conditions Input Data Rate Reference Min (1) (2) Typ Max Units 3125 Mbps 90 130 ps 90 130 ps IN+, IN20% - 80% (3) OUT+, OUT- The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not ensured. Typical values represent most likely parametric norms at VCC = +3.3V, TA = +25C, and at the Recommended Operating Conditions at the time of product characterization and are not ensured. Specification is ensured by characterization and is not tested in production. Submit Documentation Feedback Copyright (c) 2012-2013, Texas Instruments Incorporated Product Folder Links: DS30BA101 3 DS30BA101 SNLS403A - FEBRUARY 2012 - REVISED APRIL 2013 www.ti.com DEVICE OPERATION INPUT INTERFACING The DS30BA101 accepts either differential or single-ended input. DC-coupled inputs must be kept within the specified common-mode range. OUTPUT INTERFACING The DS30BA101 uses current mode outputs. Single-ended output levels are 800 mVP-P into 75 AC-coupled coaxial cable with an RVO resistor of 750, or 400 mVP-P (800 mVP-P differential) into 100 differential cable with an RVO resistor of 953. The output voltage level is controlled by the value of the RVO resistor connected between the RVO pin and VCC. The RVO resistor should be placed as close as possible to the RVO pin. In addition, the copper in the plane layers below the RVO network should be removed to minimize parasitic capacitance. Figure 2 and Figure 3 show the typical configurations for differential output and single-ended output, respectively. For single-ended output, the unused output must be properly terminated as shown. APPLICATION INFORMATION CABLE EXTENDER APPLICATION The DS30BA101 together with the DS30EA101 form a cable extender chipset optimized for extending serial data streams from serializer/deseralizer (SerDes) pairs and FPGAs over 100 differential cables and 75 coaxial cables. Setting the correct DS30BA101 output amplitude and proper cable termination are essential for optimal operation. Figure 2 shows the recommended chipset configuration for 100 differential cable and Figure 3 shows the recommended chipset configuration for 75 coaxial cable. VCC 50: 953: IN+ 100: RVO 50: OUT+ 0.1 PF 1 PF 100: Differential TP Cable IN+ 100: DS30BA101 OUT+ DS30EA101 1 PF 1 PF IN- 1 PF IN- OUT- OUT- Figure 2. Cable Extender Chipset Application Circuit for 100 Differential Cable 4 Submit Documentation Feedback Copyright (c) 2012-2013, Texas Instruments Incorporated Product Folder Links: DS30BA101 DS30BA101 www.ti.com SNLS403A - FEBRUARY 2012 - REVISED APRIL 2013 VCC 75: 750: IN+ 100: RVO OUT+ 75: 0.1 PF 75: Coaxial Cable 1 PF 1 PF IN+ DS30BA101 DS30EA101 75: 1 PF IN- OUT+ 1 PF IN- OUT75: OUT- 37.4: Figure 3. Cable Extender Chipset Application Circuit for 75 Coaxial Cable Submit Documentation Feedback Copyright (c) 2012-2013, Texas Instruments Incorporated Product Folder Links: DS30BA101 5 DS30BA101 SNLS403A - FEBRUARY 2012 - REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Original (April 2013) to Revision A * 6 Page Changed layout of National Data Sheet to TI format ............................................................................................................ 5 Submit Documentation Feedback Copyright (c) 2012-2013, Texas Instruments Incorporated Product Folder Links: DS30BA101 PACKAGE OPTION ADDENDUM www.ti.com 15-Apr-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (C) Top-Side Markings (3) (4) DS30BA101SQ/NOPB ACTIVE WQFN RUM 16 1000 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 30BA101 DS30BA101SQE/NOPB ACTIVE WQFN RUM 16 250 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 30BA101 DS30BA101SQX/NOPB ACTIVE WQFN RUM 16 4500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR -40 to 85 30BA101 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Top-Side Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 Samples PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing DS30BA101SQ/NOPB WQFN RUM 16 DS30BA101SQE/NOPB WQFN RUM DS30BA101SQX/NOPB WQFN RUM SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 1000 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1 16 250 178.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1 16 4500 330.0 12.4 4.3 4.3 1.3 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS30BA101SQ/NOPB WQFN RUM 16 1000 213.0 191.0 55.0 DS30BA101SQE/NOPB WQFN RUM 16 250 213.0 191.0 55.0 DS30BA101SQX/NOPB WQFN RUM 16 4500 367.0 367.0 35.0 Pack Materials-Page 2 MECHANICAL DATA RUM0016A SQB16A (Rev A) www.ti.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2013, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: DS30BA101SQ/NOPB DS30BA101SQE/NOPB