Power Resistor
Type RR Series
3-1773449-2 CIS WR 10/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
The RR Series is manufactured by depositing a homogeneous film of metal alloy onto a
high-grade ceramic body. After a helical groove has been cut in the resistive layer, tinned
connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated
with a red, non-flammable lacquer, which provides electrical, mechanical and climatic pro-
tection. The coating is resistant to all cleaning solvents in accordance with MIL-STD-202,
method 215 and IEC 60068-2-45.
Characteristics -
Electrical RR01 RR02 RR03
Resistance Range: 0.22Ω-1MΩ 10R - 1M0 0.33Ω-1MΩ 10R - 1M0 0.33Ω-1MΩ 10R - 1M0
Tolerance and Series: ±5%, E24 ±1%, ±5%, E24 ±1%, ±5%, E24 ±1%,
E24/E96 E24/E96 E24/E96
Maximum Dissipation: 1W 2W 3W
at Tamb. = 70°C
Thermal Resistance: 120k/W 80k/W 65k/W
Limiting Voltage (DC or RMS): 350V 500V 750V
Rated Voltage (1):Pnx R
Temperature Coefficient: ±300ppm/°C
Basic Specification: IEC 60115-1 and 60115-4
Climatic Category (IEC 60068): 55/155/56
Stability ∆R/R Max. After: For tolerance 5% For tolerance 1%
Load ±5.0% +0.1Ω ±1.0% +0.1Ω
Climatic Tests ±3.0% +0.1Ω ±1.0% +0.1Ω
Resistance to Soldering Heat ±1.0% +0.05Ω ±0.5% +0.05Ω
(1) Maximum rated voltage is the limiting voltage
Key Features
■
Metal film technology
■
Non-flammable
■
High power in small
package
■
High stability, reliability
and uniformity
characteristics
■
Good performance for
pulse applications
■
Defined interruption
behavior (fusing time)
■
Various forming styles
Power Resistor
Type RR Series
3-1773449-2 CIS WR 10/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
Fusing Characteristics
12 16 20 24 28 32 36 40
100
10
1
0.1
Fusing Time (S)
Multiple of the Power Rating
Mounting
The resistors are suitable for processing on automatic insertion equipment, cutting and bending machines.
Maximum dissipation (Pmax) in percentage of rated power as a function of ambient temperature (Tamb)
Derating Curve
-55 0 70 100 155 235
Tamb (°C)
100
80
60
40
20
0
Pmax (%)
L
d
D
A
B
A ±1 B L ±1 øD ±0.5 ød ±0.1 l ±3
RR01 52 5 ±0.5 6.8 2.6 0.65 30
RR02 52 5 ±0.5 9.0 3.5 0.8 30
RR03 63 10 ±1 15.0 5.0 0.8 30
Dimensions
Power Resistor
Type RR Series
3-1773449-2 CIS WR 10/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help
and inches unless otherwise reference purposes only.
specified. Values in brackets Specifications subject
are standard equivalents. to change.
2W
10-6 10-5 10-4 10-3 10-2 10-1 1
105
104
103
102
10
Pmax (W)
Ti(S)
Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti)
3W
10-6 10-5 10-4 10-3 10-2 10-1 1
105
104
103
102
10
Pmax (W)
Ti(S)
Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti)
One Pulse
One Pulse
Condition Test: Resistance change
≤±5% with pulse 1000 cycles as
like the figure (reference only).
1. Added power and added voltage
are within the lower teritory of this
graph.
2. Added in normal temperature
and humidity.
T
Po
10s
Condition Test: Resistance change
≤±5% with pulse 1000 cycles as
like the figure (reference only).
1. Added power and added voltage
are within the lower teritory of this
graph.
2. Added in normal temperature
and humidity.
T
Po
10s
Marking
The nominal resistance and tolerance are marked on the resistor using four or five coloured bands in
accordance with IEC publication 60062 “Colour code for fixed resistors”. Standard values of nominal
resistance are taken from the E24/E96 series for resistors with a tolerance of ±5% or ±1%. The values
of the E24/E96 series are in accordance with IEC publication 60063.
10-6 10-5 10-4 10-3 10-2 10-1 1
105
104
103
102
10
Pmax (W)
Ti(S)
Maximum permissible peak pulse power (Pmax) as a function of pulse duration (Ti)
Pulse Characteristics -
1W
One Pulse
Condition Test: Resistance change
≤±5% with pulse 1000 cycles as
like the figure (reference only).
1. Added power and added voltage
are within the lower teritory of this
graph.
2. Added in normal temperature
and humidity.
T
Po
10s
Power Resistor
Type RR Series
TE Connectivity and the TE connectivity (logo) are trademarks.
Other logos, product and Company names mentioned herein may be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein
at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-
ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change
without notice. Consult TE for the latest dimensions and design specifications.
Packaging - Tape and Reeled
Quantity
Taping MN Pq Vpcs.
RR01 52 ±1.0 80 295 295 310 75 5000
RR02 52 ±1.0 80 295 295 310 75 2500
RR03 63 ±1.0 80 295 295 310 75 1000
How to Order
RR
0
1J1K
0
TR
Common Part
01 - 1 Watt
02 - 2 Watts
03 - 3 Watts
Power Rating
J - 5%
F - 1%
Tolerance Packaging
RR - Power Resistor
TR - Reeled
TB - Ammo Pack
Value
100 ohm
(100 ohms) 100R
1K0
(1000 ohms) 1K0
100 K ohm
(100,000 ohms)
100K
MNPQuantity
RR01 75 100 255 5000
RR02 75 55 255 1000
RR03 100 110 265 1000
Packaging -
Ammo Pack Boxed
