Z2SMB6.8 ... Z2SMB200 (2 W) Z2SMB6.8 ... Z2SMB200 (2 W) Surface Mount Silicon-Zener Diodes Si-Zener-Dioden fur die Oberflachenmontage Version 2013-05-23 Maximum power dissipation Maximale Verlustleistung 0.5 2.2 0.2 2.1 0.1 5.4 0.15 Type Typ Nominal Z-voltage Nominale Z-Spannung 6.8...200 V Plastic case Kunststoffgehause 2 3.7 0.3 1.1 2W 0.5 4.6 Dimensions - Mae [mm] ~ SMB ~ DO-214AA Weight approx. - Gewicht ca. 0.1 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle Standard Zener voltage tolerance is graded to the international E 24 (~ 5%) standard. Other voltage tolerances and higher Zener voltages on request. Die Toleranz der Zener-Spannung ist in der Standard-Ausfuhrung gestuft nach der internationalen Reihe E 24 (~ 5%). Andere Toleranzen oder hohere Arbeitsspannungen auf Anfrage. Maximum ratings and Characteristics Grenz- und Kennwerte Power dissipation Verlustleistung TA = 50C Ptot 2 W 1) Non repetitive peak power dissipation, t < 10 ms Einmalige Impuls-Verlustleistung, t < 10 ms TA = 25C PZSM 40 W Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+150C -50...+175C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 60 K/W 1) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 15 K/W Zener voltages see table on next page - Zener-Spannungen siehe Tabelle auf der nachsten Seite 2 1 2 Mounted on P.C. board with 50 mm2 copper pads at each terminal Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lotpad) an jedem Anschluss Tested with pulses - Gemessen mit Impulsen (c) Diotec Semiconductor AG http://www.diotec.com/ 1 Z2SMB6.8 ... Z2SMB200 (2 W) Maximum ratings Grenzwerte (TA = 25C unless otherwise specified) Type Typ Zener voltage 2) Zener-Spannung 2) IZ = IZtest (TA = 25C wenn nicht anders spezifiziert) Test current Mestrom Dynamic resistance Diff. Widerstand IZtest / f = 1 kHz Temp. Coeffic. of Z-voltage ...der Z-Spannung Reverse volt. Sperrspanng. IR = 1 A Z-current 1) Z-Strom 1) TA = 50C Vzmin [V] Vzmax [V] IZtest [mA] rzj [] VZ [10-4 / C] VR [V] IZmax [mA] Z2SMB6.8 6.4 7.2 100 1 (<2) 0...+7 >2 278 Z2SMB7.5 7.0 7.9 100 1 (<2) 0...+7 >2 253 Z2SMB8.2 7.7 8.7 100 1 (<2) +3...+8 > 3.5 230 Z2SMB9.1 8.5 9.6 50 2 (<4) +3...+8 > 3.5 208 Z2SMB10 9.4 10.6 50 2 (<4) +5...+9 >5 189 Z2SMB11 10.4 11.6 50 4 (<7) +5...+10 >5 172 Z2SMB12 11.4 12.7 50 4 (<7) +5...+10 >7 157 Z2SMB13 12.4 14.1 50 5 (<10) +5...+10 >7 142 Z2SMB15 13.8 15.6 50 5 (<10) +5...+10 > 10 128 Z2SMB16 15.3 17.1 25 6 (<15) +6...+11 > 10 117 Z2SMB18 16.8 19.1 25 6 (<15) +6...+11 > 10 105 Z2SMB20 18.8 21.2 25 6 (<15) +6...+11 > 10 94 Z2SMB22 20.8 23.3 25 6 (<15) +6...+11 > 12 86 Z2SMB24 22.8 25.6 25 7 (<15) +6...+11 > 12 78 Z2SMB27 25.1 28.9 25 7 (<15) +6...+11 > 14 69 Z2SMB30 28 32 25 8 (<15) +6...+11 > 14 63 Z2SMB33 31 35 25 8 (<15) +6...+11 > 17 57 Z2SMB36 34 38 10 16 (<40) +6...+11 > 17 53 Z2SMB39 37 41 10 20 (<40) +6...+11 > 20 49 Z2SMB43 40 46 10 24 (<45) +7...+12 > 20 43 Z2SMB47 44 50 10 24 (<45) +7...+12 > 24 40 Z2SMB51 48 54 10 25 (<60) +7...+12 > 24 37 Z2SMB56 52 60 10 25 (<60) +7...+12 > 28 33 Z2SMB62 58 66 10 25 (<80) +8...+13 > 28 30 Z2SMB68 64 72 10 25 (<80) +8...+13 > 34 28 Z2SMB75 70 79 10 30 (<100) +8...+13 > 34 25 Z2SMB82 77 88 10 30 (<100) +8...+13 > 41 23 Z2SMB91 85 96 5 40 (<200) +9...+13 > 41 21 Z2SMB100 94 106 5 60 (<200) +9...+13 > 50 19 Z2SMB110 104 116 5 80 (<250) +9...+13 > 50 17 Z2SMB120 114 127 5 80 (<250) +9...+13 > 60 16 Z2SMB130 124 141 5 90 (<300) +9...+13 > 60 14 Z2SMB150 138 156 5 100 (<300) +9...+13 > 75 13 Z2SMB160 153 171 5 110 (<350) +9...+13 > 75 12 Z2SMB180 168 191 5 120 (<350) +9...+13 > 90 10 Z2SMB200 188 212 5 150 (<350) +9...+13 > 90 9 1 2 Notes see previous page - Funoten siehe vorhergehende Seite http://www.diotec.com/ (c) Diotec Semiconductor AG Z2SMB6.8 ... Z2SMB200 (2 W) 120 300 IZmax Tj = 25C [%] 8,2 6,8 [mA] 9,1 7,5 100 200 80 60 IZT 100 IZ 40 IZ = 5 mA 0 20 4 5 7 VZ 2 3 6 8 Typical breakdown characteristic - tested with pulses Typische Abbruchspannung - gemessen mit Impulsen 0 Ptot 0 0 TA 100 50 150 [V] 10 [C] Power dissipation versus ambient temperature 1 ) Verlustleistung in Abh. von d. Umgebungstemp.1 ) 102 [A] IZmax Tj = 125C 10 10 18 24 30 36 43 51 56 62 68 75 91 82 100 Tj = 25C 1 10-1 IZT IF 10-2 0.4 30a-(1a-1.1v) VF 0.8 1.0 1.2 1.4 [V] 1.8 Typ. Zener voltage vs. zener current - Typ. Abbruchspannung uber Zenerstrom Forward characteristics (typical values) Durchlasskennlinien (typische Werte) Tj = 25C f = 1.0 MHz [pF] VR = 0V VR = 4V VR = 20V VR = 40V Cj VZ [V] Junction capacitance vs. zener voltage (typical) Sperrschichtkapazitat in Abh. v.d. Zenerspg. (typ.) (c) Diotec Semiconductor AG http://www.diotec.com/ 3