TPM Multianode Tantalum Ultra Low ESR Capacitor Low ESR, high capacitance and high ripple current are the key parameters for processor filtering. Multianode configuration within a standard E case package meets these requirements. Parameters such as ESR 18m, capacitance 1000F and ripple current up to 3A rms makes TPM series ready to use with the latest processor families. CASE DIMENSIONS: millimeters (inches) Code EIA Code L0.20 (0.008) E 7343-43 7.30 (0.287) W+0.20 (0.008) H+0.20 (0.008) A+0.30 (0.012) W10.20 (0.008) -0.10 (0.004) -0.10 (0.004) -0.20 (0.008) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) S Min. 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. For part marking see page 93 HOW TO ORDER TPM E 108 * 004 R 0018 Type Case Size Capacitance Code 1st two digits represent significant figures, 3rd digit represents multiplier in pF Capacitance Tolerance K=10% M=20% Rated DC Voltage 004=4Vdc 006=6.3Vdc Packaging R = 7" T/R S = 13" T/R ESR value in m NOTE: The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: +85C: +125C: +85C: +125C: All technical data relate to an ambient temperature of +25C 470F to 1000F 10%, 20% 0.01CV 2.5 4 6.3 10 16 20 25 35 50 1.8 2.7 4.2 6.6 10.6 13.2 16.5 23.1 33 3.2 5.2 8 13 20.8 26 32.5 45.5 65 2.0 3.2 5 8 12.8 16 20 28 40 -55C to +125C 1% per 1000 hours at 85C, Vr with 0.1/V series impedance, 60% confidence level 29 TPM Multianode Tantalum Ultra Low ESR Capacitor CAPACITANCE AND RATED VOLTAGE RANGE LETTER DENOTES CASE SIZE ESR LIMIT IN BRACKETS Capacitance F 10 15 22 33 47 68 100 150 220 330 470 680 1000 1500 2200 2.5V 4V Rated Voltage DC (VR) to 85C 10V 16V 20V 6.3V 25V 35V 50V E(120) E(100) E(90) E(55) E(45) E(40) E(40) E(23) E(18) E(25) E(18) E(25) E(35) E(30) E(30) E(23) Developmental Ratings - subject to change, AVX reserve rights to change ESR specification prior to release. Available Ratings RATINGS & PART NUMBER REFERENCE AVX Part No. Rated Case Capacitance Voltage Size (F) (V) DCL DF ESR (A) % Max. (m) Max. Max. @100kHz 100kHz Ripple Current Ratings (A) 25C 100kHz Ripple Voltage Ratings (V) 85C 125C 25C 85C 125C 3084 3486 1370 1549 79 70 71 63 32 28 2700 3084 1200 1370 90 79 81 71 36 32 2500 2700 1111 1200 97 90 87 81 39 36 2338 1039 104 94 42 4 Volt @ 85C (2.7 Volt @ 125C) TPME687*004#0023 TPME108*004#0018 E E 680 1000 4 4 27 40 TPME477*006#0030 TPME687*006#0023 E E 470 680 6.3 6.3 28 41 TPME337*010#0035 TPME477M010#0030 E E 330 470 10 10 33 47 TPME157*016#0040 E 150 16 24 6 6 23 18 3426 3873 6 Volt @ 85C (4.2 Volt @ 125C) 6 6 30 23 3000 3426 10 Volt @ 85C (6.6 Volt @ 125C) 6 6 35 30 2777 3000 16 Volt @ 85C (10 Volt @ 125C) 6 40 2598 All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. * Insert K for 10% and M for 20% Capacitance Tolerance # Standard Plating - Insert R for 7" reel and S for 13" reel # Gold Plating - Insert A for 7" reel and B for 13" reel NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. TPM MULTIANODE CONSTRUCTION 30