Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
AMPHENOL CORPORATION
Amphenol Industrial
Phone: 888-364-9011
191 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Notice: Speci cations are subject to change without notice. Contact your nearest Amphenol Corporation Sales Of ce for the latest speci cations. All
statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility
of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty
that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety
measures are indicated or that other measures may not be required. Speci cations are typical and may not apply to all connectors.
Amphenol® 97 Series Connectors are UL recognized and CSA recognized.
www.amphenol-industrial.com
PT Series
Miniature Cylindrical Connectors
12-070-19
Amphenol®
AMPHENOL CORPORATION
Amphenol Industrial
Phone: 888-364-9011
191 Delaware Avenue
Sidney, NY 13838-1395
www.amphenol-industrial.com
Proprietary/MIL-DTL-26482 Series 1 connectors covered in this
catalog are widely used in general duty and environmental
applications, both industrial and military. Markets that use this
family of connectors include:
• Instrumentation
• Monitoring Equipment
• Machine Tool, Factory Automation
• Communications
• Geophysical
• Industrial Controls and Robotics
• Oil and Petrochemical Industries
• Rail/Mass Transit
• Military/Aerospace
Table of Contents Page
Introduction, Amphenol® Miniature Cylindrical
General Information, Design Flexibility . . . . . . . . . . . . . . 1, 2
Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . 3
Insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
PT, SP, MS/PT Proprietary/MIL-DTL-26482, Series 1
Bayonet Coupling, Solder Contacts
GeneralInformation,Specications,ServiceClass........11,12
PT00 (MS3110), SP00 wall mounting receptacle . . . . . . . . . 13
PT01 (MS3111) cable connecting receptacle . . . . . . . . . . . .14
PT02 (MS3112) SP02 box mounting receptacle . . .. . . . . . . .15
PT06 (MS3116) SP06 straight plug . . . . . . . . . . . . . . . . . .16
PT07 (MS3114) SP07 jam nut receptacle . . . . . . . . . . . . . . . . . . . 17
PT08E, SP08E 90 degree plug . . . . . . . . . . . . . . . . . . . . .18
PT Connectors with Printed Circuit Board Contacts -
box mount receptacle, jam nut receptacle . . . . . . . . . . . . . . . . . . .19
PTB, SPB thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . . . . .20
GeneralInformation,Specications-PThermetic.......21
PTIH (MS3113H) hermetic solder mounting receptacle . . . . . . 22
PT02H hermetic box mounting receptacle . . . . . . . . . . . . . 23
PT07H (MS3114H) hermetic jam nut receptacle . . . . . . . . . .24
PT, SP, MS/PT how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
PT-SE, SP-SE, MS/PT-SE Proprietary/MIL-DTL-26482, Series 1
Bayonet Coupling, Crimp Contacts
GeneralInformation,Specications,ServiceClass........26,27
PT00SE (MS3120), SP00SE wall mounting receptacle . . . . . . . . .28
MF00SE (MS3128) wall mounting receptacle . . . . . . . . . . . . . . . . .29
PT01SE (MS3121) SP01SE cable connecting receptacle . . . . . .30
PT02SE (MS3122) SP02SE box mounting receptacle . . . . . . . 31
MF02SE (MS3127) box mounting receptacle . . . . . . . . . . . . . . . .. 32
PT06SE (MS3126), SP06SE straight plug . . . . . . . . . . . . . . 33
PT07SE (MS3124) SP07SE jam nut receptacle . . . . . . . . . . 34
PT08SE, SP08SE 90 degree plug . . . . . . . . . . . . . . . . . . 35
PT-SE, SP-SE, MS/PT-SE how to order . . . . . . . . . . . . . . . . 36
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-40
Glands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Contacts, Power and Thermocouple Crimp . . . . . . . . . . . . . . . . . 43
Contacts, Shielded Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-48
Mounting Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .49
Other Amphenol Miniature Cylindrical Connectors . . . . . . . . . . . . . . . . . . 50
If more information is needed concerning
the connectors covered in this publication,
or if there are special application needs,
please contact:
Amphenol Corporation
Amphenol Industrial Operations
191 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 888-364-9011
Fax: 520-397-7169
Please go to the Amphenol websites to
view, download and save this catalog and
most all of Amphenol interconnection
product literature.
www.amphenol-industrial.com
Some miniature connector styles are
available in RoHS Compliant versions.
Please contact Amphenol Industrial
Operations for more information.
Amphenol operates Quality Systems
thatarecertiedtoISO9001:2015;ISO
14001:2015;ISO/TS16949:2016bythird
party registrars.
NOTE:
The connector products in this brochure
were formerly known as Bendix®
products. These products are now
manufactured and sold under the
Amphenol® brand name. The name
“Amphenol” will replace the name “Bendix”
on products and literature in the future.
NOTE:
The Miniature MIL-DTL-26482, Series
2 connectors PTS-DR and MS/PTS-DR
(formerly in this catalog) are no longer
supplied with these designations.
Amphenol now supplies the Amphenol®/
Matrix® MIL-DTL-26482, Series 2. (Military
numbers include MS3470 - MS3472,
MS3474, - MS3476).
1
Amphenol® Miniature Cylindrical Connectors
Proprietary/MIL-DTL-26482, Series 1
Amphenol®MiniatureCylindricalconnectorsoertwicethenumberofcontactsinjusthalfthesizeofaStandard
connector. These miniature connectors, are available in several series, each with varying design characteristics
andcustomeroptionstomeetcostconsiderationsandprovidemaximumdesignexibility.Therearetwostyles
withinthefamilythatareMSapprovedandqualiedtoMIL-DTL-26482,Series1,andinadditionthereareseveral
proprietary styles.
Common features of all styles:
• All are for general duty applications and environmental sealing is achieved with the grommet and clamp design.
• Operatingtemperatureisfrom–55°Cto+125°;Operatingvoltageto1000VAC(RMS)atsealevel.
• Pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and
provideanindeniteshelflife.
• All have resilient inserts which provide high dielectric strength and moisture barrier.
• Avarietyofshellnishes(includingnon-cadmium)andavarietyofback-endaccessoriesareavailablewithinthe
styles.
Bayonet Coupling with Solder Contact Termination
Bayonet Coupling with Crimp Contact Termination
PT Solder
jam nut receptacle and
mated straight plug
PT Solder
wall mount receptacle
PT-SE Crimp
wall mount receptacle
and mated straight plug
PT, MS/PT (solder)
• MS and proprietary versions
• Factory installed solder contacts
• 3 point bayonet coupling and 5 key/key-
way mating.
• Intermateable with all miniature series
connectors.
• MS/PT meets MIL-DTL-26482 Series 1,
service classes E, F and P.
• MS/PTisULrecognized.
SP (solder)
• SPSeriesisamodicationofthePTwith
samefeaturesexceptawiderangefor
back panel mounting
Options
• 7 shell styles with 60 insert
patterns
• Hermetic seal (glass fusion)
receptacle styles available
• Pressurizedthrubulkhead
receptacle style available
• Per-installed coax solder con-
tacts are available
• Printed circuit board contacts
are available
PT-SE, MS/PT-SE (crimp)
• MS and proprietary versions
• Crimp rear insertable/front release
contact termination. (closed entry socket
insert prevents probe damage).
• 3 point bayonet coupling and 5 key/key-
way mating.
• Intermateable with all miniature series
connectors.
• MS/PT-SE meets MIL-DTL-26482 Series 1,
service classes E, F, P.
SP-SE (crimp)
• ModicationofthePT-SEwithwider
angeforbackpanelmounting
Options
• 6 shell styles with 47 insert
patterns
• Coax and thermocouple con-
tacts are available
2
The large family of miniature proprietary and MS style connectors provides for
many optional features and designs. In addition to the choices of bayonet or threaded
shells, solder or crimp termination within the style variations, there are additional
options that are shown here.
Hermetics
Hermetically sealed receptacles have fused compression
glass sealed inserts which provide environmental moisture
sealing. There are three hermetic styles within the PT
bayonet series.
Coaxial Contacts
Amphenol Miniature connectors can incorporate shielded
coaxcontacts.Size8and12crimpcoaxcontactsare
availableinPT-SE,SP-SE,MS/PT-SE.Factoryinstalledsize8
and 12 solder type coax contacts are available in PT, SP,
MS/PT connectors. See coax contact information pages at
the end of this catalog.
Printed Circuit Board Tail Contacts
PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are
available with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482
connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol
for further information.
Flex Circuitry
Flex termination assemblies for attaching cylindrical connectors to printed circuit
boards are available through the Amphenol division ACT, Advanced Circuit
Technology. Flex can be used with miniature 26482 connectors and it can be designed
tomeetspeciclength,currentcarryingcapacityandtottheprecisegeometric
shape of the connector to board package. Flex circuity plugs into a printed circuit
board and creates a self-locking terminal pad which eliminates the need for an
additional interconnect to the PCB.
Filter Protection
AmphenoloerstheFPTSerieswhichcombinestheminiaturePTserieswithanEMI
lter.DesignedtoprovideEMIprotectionforsensitivecircuits,eachcircuitis
individuallylteredwithintheconnector,eliminatingtheneedforcostlyandbulky
exteriornetworklters.FiltercontactsareavailableinMF,HF,VHF,andUHFranges
and are intermateable and intermountable with MIL-DTL-26482 connectors. For
further information see catalog 12-120, Amphenol EMI Filter Transient Protection
Connectors.
Overmolded Cable
Overmold seals and cables can be designed for almost any industrial application.
Avarietyofmaterialsareavailable:neoprene,hypalonandothers;andavarietyof
lengthscanbedesignedtomeetcustomerspecications.Overmoldsealstotherear
of the connector and to the cable jacket providing moisture sealing.
Amphenol Miniature Cylindrical
designexibility
PT Connector with Hermetic
Seal Insert and Coax
Contacts
PT Connector with PC Tail
Contacts
PT Connector with Flex
PT Connector with EMI
Filter Protection
PT Connector with
Overmolded Cable
3
Amphenol Miniature Cylindrical
connector selection guide
CHARACTERISTICS Solder Crimp
PT MS/PT SP MS/ PT-SE PT-SE
Intermateable†O O O O O
Contacts Solder • • •
Crimp Ri/FR • •
Contact Retention System Non-Removable • • •
Removable • •
Coupling Bayonet • • • • •
Standard Finishes††
Olive Drab Cadmium (003) • • • •
Anodic Coated (005) •
Temperature Range Resilient Dielectric (-55°C to +125°C) • • • • •
Wide Mounting Flange •
Hermetic Seal • • •
SHELL STYLE AVAILABILITY
Wall Mounting Receptacle “00” • • • • **•
Cable Connecting Receptacle “01”*** • • • •
Box Mounting Receptacle “02” *• • • • **•
Straight Plug “06” • • • • •
Jam Nut receptacle “07” *• * • • • •
thru-bulkhead Receptacle “TB” • •
Solder Mount Receptacle “I” *• * •
90° Plug “08” • • •
The accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to
meettheapplicationrequirements.Furtherinformationcanbefoundinspecicsectionsofthiscatalog.
RI/FR = Rear Insertion/Front Releasable
† o intermates with o
††Optionalnishesavailable.See“howtoorder”sections.
* Available in hermetic version
** Dual mounting holes
*** This connector style is sometimes referred to as a cable connecting “plug.”
It does, however, mate with either a straight or 90 degree plug.
4
Amphenol Miniature Cylindrical
insert availability
Insert
Arrangement
Solder Termination Crimp
Termination
Screw
Termination Total
Contacts
Contact Size
MS/PT PT SP
Hermetic
PT
MS-PT
MS/PT-SE
PT-SE
SP-SE
PT 20 16 12 10 8
Coax Service
Rating
12 8
6-1 X X X* 1 1 I
8-2 X X X X 2 2 I
8-3 X X X X 3 3 I
8-4 X X X X 4 4 I
8-33 X X X X X 3 3 I
8-98 X X 3 3 I
10-2 X X 2 2 I
10-5 X X X* 5 5 I
10-6 X X X X X 6 6 I
10-7 X X X 7 7 I
10-70 X X 1 1 Coax
10-98 X X X X* 6 6 I
12-3* X X X X X 3 3 II
12-4 X X X* 4 4 I
12-8 X X X X* X 8 8 I
12-10 X X X X X 10 10 I
12-14 X X 14 14 I
12-98 X X 10 10 I
14-2 X X 2 2 II
14-4 S S X 4 4 I
14-5 X X X X X 5 5 II
14-8 X X 8 6 2 I
14-12 X X X X X 12 8 4 I
14-15 X X X X X 15 14 1 I
14-18 X X X X* X 18 18 I
14-19 X X X X X 19 19 I
14-22 X* 5 1 4 I
14-71 P X 4 3 I
14-91 HV S X X* 3 3 1 **
14-AA X X X 4 4 I
16-8 X X X X X 8 8 II
16-23 X X X X 23 22 1 I
16-26 X X X X X 26 26 I
16-70 X X 15 14 1 N/A
16-76††† X* 14 8 1 5 ***
16-99 X X X X 23 21 2 I
18-2 X X X 2 2 II
18-3 X X X X 3 3 II
18-5 X X X* 5 5 II
18-8 8 8 I
18-11 X X X X X 11 11 II
18-30 X X X X* X 30 29 1 I
*Not available in MS version
**Flashovervoltage5,000VAC(RMS)
***1500VAC(RMS)
S designates Socket insert only.
P designates Pin insert only.
†Size12contactsfor#10wire
††Not presently tooled
†††Contacts must be ordered separately
5
Amphenol Miniature Cylindrical
insert availability, cont.
Insert
Arrangement
Solder Termination Crimp Termination
Total
Contacts
Contact Size
MS/PT PT SP
Hermetic
PT
MS-PT
MS/PT-SE
PT-SE
SP-SE
20 16 12
Coax Service
Rating
12 8
18-32 X X X X X 32 32 I
18-71 X* 9 8 1 Coax, II
18-72 X X 14 10 4 N/A
18-75 X X 4 4 Coax
18-76 4 3 1 II
18-80 X X 8 6 2 Coax, I
18-91 HV X* 6 6 **
20-16 X X X X X 16 16 II
20-24 X X X 24 24 I
20-25 X X 25 25 I
20-26 X X 26 26 6 I
20-27 X X X 27 27 I
20-39 X X X X X 39 39 2 I
20-41 X X X X X 41 41 I
20-70 14 10 4 Coax
20-90 HV X X 7 7 Hi-Voltage
22-7 X X X* 7 7 Coax
22-21 X X X X X 21 21 II
22-25 X* 25 25 I
22-32 X X X X 32 32 I
22-34 X X 34 34 I
22-36 X X 36 36 I
22-41 X X X X X 41 27 14 I
22-55 X X X X X 55 55 I
22-70 X X 19 13 6 I, Coax
22-71 9 2 7 I, Coax
22-72 X X 19 12 4 3 N/A
22-78††† X* 7 7 Coax
22-96 X* 7 7†II
24-31 X X 31 31 I
24-51††† X* 51 47 4 I
24-61 X X X X X 61 61 I
24-71 X X 49 45 2 2 N/A
24-79 1 1 5 Coax
*Not available in MS version
**Flashovervoltage5,000VAC(RMS)
***1500VAC(RMS)
†Size12contactsfor#10wire
††Not presently tooled
†††Contacts must be ordered separately
6
Amphenol Miniature Cylindrical
alternate positioning
AB
AB
AB
AB
Alternate Positioning
To avoid cross-plugging problems in applications requiring the use of
morethanoneminiaturecylindricalconnectorofthesamesizeand
arrangement, alternate insert rotations are available as indicated in the
accompanying chart.
As shown in the diagram at right, the front face of the pin insert is
rotated within the shell in a clockwise direction from the normal shell
key. The socket insert would be rotated counterclockwise the same
number of degrees in respect to the normal shell key.
Insert Rotation
Shell
Size
Insert
Arrangement
Degrees
W X Y Z
6 6-1 - - - -
8 8-2* 58 122 - -
8 8-3 60 210 - -
8 8-4* 45 97 184 -
8 8-33* 90 - - -
8 8-98 - - - -
10 10-2 45 90 315 -
10 10-5* 45 151 180 270
10 10-6* 90 - - -
10 10-7 90 - - -
10 10-70 - - - -
10 10-98* 90 180 240 270
12 12-3 - - 180 -
12 12-4* 38 - - -
12 12-8 90 112 203 292
12 12-10* 60 155 270 295
12 12-14 - - - -
12 12-98* 61 135 189 340
14 14-2 58 122 - -
14 14-4* 45 - - -
14 14-5* 40 92 184 273
14 14-8 48 162 189 312
14 14-12* 43 90 - -
14 14-15* 17 110 155 234
14 14-18* 15 90 180 270
14 14-19* 30 165 315 -
14 14-22 45 - - -
14 14-71 - - - -
14 14-91HV - 60 - -
14 14-AA* 45 - - -
16 16-8* 54 152 180 331
16 16-23 158 270 - -
16 16-26* 60 - 275 338
16 16-70 41 122 216 286
16 16-76 - - - -
16 16-99* 66 156 223 340
18 18-2 58 122 - -
18 18-3 - - 180 -
Insert Rotation
Shell
Size
Insert
Arrangement
Degrees
W X Y Z
18 18-5 55 97 263 315
18 18-8 180 - - -
18 18-11* 62 119 241 340
18 18-30* 180 193 285 350
18 18-32* 85 138 222 265
18 18-71 18 108 127 215
18 18-72 53 102 213 293
18 18-75 45 - - -
18 18-76 - - - -
18 18-80 45 90 135 160
18 18-91HV 90 180 240 270
20 20-16* 238 318 333 347
20 20-24 70 145 215 290
20 20-25 72 144 216 288
20 20-26 13 107 210 322
20 20-27 72 144 216 288
20 20-39* 63 144 252 333
20 20-41* 45 126 225 -
20 20-70 63 135 222 335
20 20-90 45 135 225 315
22 22-7 19 41 - -
22 22-21* 16 135 175 349
22 22-25 60 125 211 336
22 22-32 72 145 215 288
22 22-34 62 142 218 298
22 22-36 72 144 216 288
22 22-41 39 135 264 -
22 22-55* 30 142 226 314
22 22-70 30 82 218 312
22 22-71 33 191 236 270
22 22-72 42 200 277 339
22 22-78 19 41 - -
22 22-96* 19 41 - -
24 24-31 90 225 255 -
24 24-51 22 171 313 -
24 24-61* 90 180 270 324
24 24-71 39 131 205 281
24 24-79 - - - -
* Available in Hermetic Class
Position W Position X Position Y Position Z
Viewslookingintofrontfaceofpininsertorrearofsocketinsert.
7
Amphenol Miniature Cylindrical
insert arrangements
AB
A
B
C
A
B
C
D
A
C
B
A
C
B
BA
Insert Arrangement 6-1 8-2 8-3 8-4 8-33 8-98 10-2
Service Rating I I I I I I I
Number of Contacts 1 2 3 4 3 3 2
Contact Size 20 20 20 20 20 20 16
A
DCB
E
A
F
E
DC
B
A
FE
DC
BAC
B
A
D
C
B
Insert Arrangement 10-5 10-6 10-7 10-70 10-98 12-3 12-4
Service Rating I I I COAX I II I
Number of Contacts 5 6 7 1 6 3 4
Contact Size 20 20 20 8 COAX 20 16 16
A
H
G
F
E
D
C
B
A
KJ
H
G
FED
C
B
A
P
N
M
L
K
J
H
F
E
D
C
B
R
AB
C
D
E
F
G
H
JK
AD
BC
A
E
DC
B
Insert Arrangement 12-8 12-10 12-14 12-98 14-2 14-4 14-5
Service Rating I I I I II I II
Number of Contacts 8 10 14 10 2 4 5
Contact Size 20 20 20 20 12 12 16
A
BH
C
D
E
F
G
A
D
C
B
H
G
F
E
M
L
K
J
A
H
G
F
E
D
C
B
M
L
K
JR
P
N
A
D
C
B
H
GF E
M
L
K
JP
N
U
T
SR
A
D
C
B
H
GF
E
M
L
K
JTS
R
P
N
UV
A
D
C
BE
DA
C
B
Insert Arrangement 14-8 14-12 14-15 14-18 14-19 14-22 14-71
Service Rating I I I I I I I
Number of Contacts 6 2 8 4 14 1 18 19 1 4 3 1
Contact Size 20 12 20 16 20 16 20 20 20 12 16 8 COAX
8
Amphenol Miniature Cylindrical
insert arrangements
A
CB
A
D
C
B
A
D
C
B
H
G
F
E
A
HGF
E
D
C
B
P
N
M
L
K
J
Z
Y
X
W
V
U
T
S
R
A
Z
YXW
V
U
TS
R
P
N
M
L
K
JHG
F
E
D
C
B
ab
c
Insert Arrangement 14-91HV 14-AA 16-8 16-23 16-26
Service Rating Flashover
5,000 VAC (RMS) I II I I
Number of Contacts 3 4 8 22 1 26
Contact Size 20 12 16 20 16 20
A
H
B
J
K
D
L
R
E
M
F
N
G
P
C
A
M
L
K
J
H
G
F
E
D
C
B
P
N
A
M
L
K
JHG
F
E
D
C
B
TS
R
P
NZ
Y
X
W
V
U
Insert Arrangement 16-70 16-76 16-99 18-2 18-3
Service Rating N/A Flashover
1,500 VAC (RMS) I II II
Number of Contacts 14 1 8 1 5 21 2 2 3
Contact Size 20 12 COAX 20 12* 2 COAX 20 16 8 10
*Contact Positions Optional
A
E
DC
B
A
H
G
F
ED
C
B
A
L
K
J
H
G
F
E
D
C
B
A
ZYX
W
V
U
T
S
R
P
N
M
L
KJH
G
F
E
D
C
B
a
b
c
d
e
f
g
Insert Arrangement 18-5 18-8 18-11 18-30
Service Rating II I II I
Number of Contacts 5 8 11 29 1
Contact Size 12 12 16 20 16
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
KJHG
F
E
D
C
B
a
b
c
d
e
f
g
h
j
A
H
G
F
E
D
C
B
J
A
B
C
MP
L
ND
E
H
F
G
J
K
AD
CB
Insert Arrangement 18-32 18-71 18-72 18-75
Service Rating I II, COAX N/A COAX
Number of Contacts 32 8 1 10 4 4
Contact Size 20 16 8 COAX 20 12 COAX 8 COAX
9
Amphenol Miniature Cylindrical
insert arrangements
A
D
C
B
A
G
F
E
D
C
BH
A
F
E
DC
B
A
M
L
K
J
H
G
F
E
D
C
B
S
RP
N
Insert Arrangement 18-76 18-80 18-91 HV 20-16
Service Rating II I, COAX Flashover
5,000 VAC (RMS) II
Number of Contacts 3 1 6 2 6 16
Contact Size 12 COAX 8 COAX 20 8 COAX 20 16
A
Z
Y
X
W
V
U
TS
R
P
N
M
L
K
J
H
G
F
E
D
C
B
a
A
Z
Y
X
W
VU
T
S
R
P
N
M
L
K
JH
G
F
E
D
C
B
a
b
A
BC
D
E
F
G
H
JK
L
M
N
P
R
ST
UV
W
X
Y
Z
a
b
c
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
K
JH
G
F
E
D
C
B
a
b
c
d
Insert Arrangement 20-24 20-25 20-26 20-27
Service Rating I I I I
Number of Contacts 24 25 20 6 27
Contact Size 20 20 20 12 20
A
Z
Y
X
W
V
U
T
S
R
P
N
M
LKJ
H
G
F
E
D
C
B
a
r
pn
m
k
j
h
g
f
ed
c
b
i
q
A
Z
Y
X
W
V
U
T
S
R
P
NMLK
J
H
G
F
E
D
C
B
a
t
s
r
p
q
n
m
k
j
i
h
g
f
ed
c
b
A
P
N
M
L
K
J
G
FE
D
C
B
H
A
G
FED C
B
Insert Arrangement 20-39 20-41 20-70 20-90
Service Rating I I COAX HI-VOLTAGE
Number of Contacts 37 2 41 10 4 7
Contact Size 20 16 20 20 8 COAX 20
A
G
D
C
BF
E
A
X
W
V
UT
S
R
P
N
M
L
K
J
H
G
F
E
D
C
B
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
K
J
HG
F
E
D
C
B
a
b
A
R
P
N
MB
b
S
ahc
ZT
LC
j
gd
Y
X
K
J
H
W
V
G
F
U
E
D
fe
Insert Arrangement 22-7 22-21 22-25 22-32
Service Rating COAX II I I
Number of Contacts 7 21 25 32
Contact Size 8 COAX 16 16 20
10
Amphenol Miniature Cylindrical
insert arrangements
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
KJH
G
F
E
D
C
B
a
l
k
j
h
g
f
e
d
c
b
A
T
S
B
V
U
R
C
f
W
P
D
mh
g
e
X
N
E
n
lj
d
M
L
KJ
a
c
bZ
Y
H
G
F
k
A
Z
Y
X
W
V
U
T
S
R
P
NMLK
J
H
G
F
E
D
C
B
a
t
s
r
q
p
n
m
k
j
i
h
g
f
e
d
c
b
A
Z
Y
X
W
V
U
T
S
R
P
N
M
L
KJH
G
F
E
D
C
B
a
x
wv
u
t
s
r
q
p
n
m
y
k
j
i
h
g
fe
d
c
b
z
HH
GG
FF
EE
DD
CC
BB
AA
Insert Arrangement 22-34 22-36 22-41 22-55
Service Rating I I I I
Number of Contacts 34 36 27 14 55
Contact Size 20 20 20 16 20
V
KD
TP
B
LC
E
H
M
J
F
G
RS
N
A
U
A
G
F
E
D
C
B
HJ
A
V
F
E
N
L
T
J
HD
M
R
G
P
S
U
C
KB
A
G
F
E
D
C
B
Insert Arrangement 22-70 22-71 22-72 22-78
Service Rating i, COAX I, COAX N/A COAX
Number of Contacts 12 6 2 7 12 4 3 7
Contact Size 20 8 COAX 20 8 COAX 20 16 8 COAX 8 COAX
A
G
F
E
D
C
B
A
X
W
V
U
T
S
R
Q
P
Y
N
M
L
K
J
H
GF
E
D
C
B
Z
a
g
f
e
d
c
b
Insert Arrangement 22-96 24-31 24-51 24-61
Service Rating II I I I
Number of Contacts 7 31 47 4 61
Contact Size 12 for #10 WIRE 16 20 12 COAX 20
Contact Legend
Symbol Contact Size
20
16
12
HV
12 COAX
8 COAX
A
Z
Y
X
W
V
U
T
S
R
PNML
K
J
H
G
F
E
D
C
B
a
z
y
x
w
v
u
t
s
r
p
nm
q
kj
i
h
g
f
e
d
c
b
AA
PP
NN
MM
LL
KK
JJ
HH
GG
FF
EE
DD
CC BB
a
e
C
B
D
d
f
E
g
F
i
G
h
j
m
p
n
q
r
AA
BB
b
Xt
y
Z
Y
A
W
V
U
T
S
R
PNMLK
J
H
z
w
k
v
x
s
u
c
F
AD
EBC
Insert Arrangement 24-71 24-79
Service Rating N/A COAX
Number of Contacts 45 2 2 1 5
Contact Size 20 16 8 COAX 20 8 COAX
11
Amphenol PT, SP, MS/PT
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and solder termination
Table 1: CONTACT DATA/CONNECTOR RATINGS
Contact Specifications
Contact
Size
Test Cur-
rent
Maximum Millivolt
Drop†
Solder Well
Diameter
Solder Well
Depth
20 7.5 55 .046 +.004 .125 +.031
-.000 -.000
16 13.0 50 .078 +.005 .188 +.031
-.003 -.000
12 23.0 42 .116 +.004 .188 +.031
-.002 -.000
Amphenol® solder contact miniature cylindrical connectors meet the
most critical application needs. Design versatility combined with high
reliability performance makes these series of Miniature Cylindrical
Connectors ideal for environmental sealing or pressurized applications.
TheMS/PTSeriesisqualiedtoMIL-DTL-26482,Series1andhasalltheoutstanding
designcharacteristicsandqualityofthePTSeries.TheSPSeriesisamodication
ofthePT,providingspecialshellswithawidemountingangeforbackpanel
mounting.
Acorrosionresistantelectricallyconductivenishofcadmiumplatewithanolive
drab chromate after-treatment is used on the PT and MS/PT. The SP is given a
durable non-conductive hard anodic “Alumilite”® coating which provides abrasion
protection and resistance to corrosion.
**NEW** 500 hour corrosion resistance, RoHS compliant harsh environment
conductive plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light
Gun Metal Gray appearance.
Shell components for these series are aluminum. The dependable 5 key/keyway
polarizationwithbayonetlockcouplingassurespositivematingwithnochance
of cross plugging. Spring tension provided by a wave washer in the coupling nut
ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient neoprene. This
provides excellent moisture sealing at the gasket and superior electrical isolation of
the contact in the insert.
Both pins and sockets are machined from a copper alloy and are gold plated.
Thisgoldplatingeliminatescontactcorrosionandoersanindeniteshelflife.
Socket contacts for these series are a closed entry design. A breakaway style plug is
available in the PT solder series. Hermetics receptacles are available in PT and MS/
PT solder series. Receptacles with printed circuit board contacts are also available.
PTSolderisULrecognizedunderle#E115497,Vol.1,Sec.5.ThePT,SPandMS/PT
Series are intermateable and intermountable with all existing Miniature Cylindrical
Series connectors.
Refer to pages 4-10 for insert arrangement availability.
PT, SP, MS/PT
Service Rating
Service
Rating
Recommended
Operating
AC Voltage at Sea
Level
Test Voltage AC (RMS), 60 cps
Sea
Level 50,000 ft. 70,000 ft. 110,000
ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
† Silver plated wire
per MIL-DTL-26482
* This connector
style is sometimes
referred to as a
cable connecting
“plug.” It does,
however, mate
with a straight or
90 degree plug.
wall mounting
receptacle
cable
connecting
receptacle*
box mounting
receptacle
straight plug
jam nut
receptacle
thru bulkhead
receptacle
12
“A” general
duty
“E” (SR),
MS/”F”
strain relief
“E”,
MS/”E”
open wire seal
“P”
MS/ “P”
potting boot
“PG”
cable gland
seal
PT, SP Service Classes
PT and SP connectors are available in the service classes listed below.
Eachclass,withtheexceptionofhermetic,oersoneormoremeansof
terminating or supporting a cable or wire bundle.
“A” Generalduty;backshellisthreadedforconduit
attachment of MS3057 cable clamp
“A” (SR) General duty, with strain relief clamp for cable
or wire bundle support
“C” Pressurizedreceptacle;lessthan1cu.in.per
hour leakage at 30 psi over a temperature
range of –65°F to +257°F
“E” Environmental resistant connectors - supplied
with a multi-holed grommet and clamping
nutformoisture-proongindividualopen
wires
“E” (SR) Environmental resistant strain relief clamp
andgrommetformoistureproongindividual
wires;providesaddedwirebundlesupport
“P” Translucent nylon boot for retaining customer-
appliedpottingcompounds;heldin
place by a threaded ring
“P” (SR) Strain relief clamp suitable for retaining customer
applied potting compounds, with provision
for wire support
“PG” Compressingcableglandformoistureproong
jacketed cables.
“H”* Hermetically sealed with compression glass
inserts (see pages 22-25)
Style with printed circuit board contacts- see page 20.
MS/PT Service Classes
TheMS/PTMiniatureconnectorisavailableinthefollowingcertied
service classes:
“E” Environmental resistant connectors - supplied
with a multi-holed grommet and clamping
nutformoisture-proongindividualopenwires
“F” Grommet seal with strain relief clamp
“J” Compressing clamp and neoprene gland for
moistureproongmulti-conductorjacketed
cable and strain relief. Telescoping sleeves
(MS 3420A) can be used to adapt to cables
smaller than minimum close-down.
“P” Translucent nylon boot for retaining customer-
appliedpottingcompounds;heldin
place by a threaded ring
Amphenol PT, SP, MS/PT
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and solder termination, cont.
13
PT00 (MS3110)
SP00
wall mounting receptacle
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
L
Q
M
A
KZ
4 Holes
Shell
Size
Receptacle Front View Receptacle Side View Class “A”, “C”
R
(TP)
S
Max. A
+.001
-.005
K +.020
-.010 L Max.
M +.010
-.000 Q
Thread
Class 2A
Z
Max. D Min. L
Max.
N
Max.
V
Thread
Class A
PT SP PT SP PT SP PT SP PT SP
6 .469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 NEF .468 .438 .175 1.553 .462 .3750-32 NEF
8 .594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 UNEF .468 .438 .297 1.553 .590 .5000-28 UNEF
10 .719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 NEF .468 .438 .421 1.553 .717 .6250-24 NEF
12 .812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 NEF .468 .438 .546 1.553 .834 .7500-20 UNEF
14 .906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 UNEF .468 .438 .663 1.553 .970 .8750-20 UNEF
16 .969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 UNEF .468 .438 .787 1.553 1.088 1.0000-20 UNEF
18 1.062 1.203 1.312 1.516 1.125 .493 .524 .906 .431 .462 1.0625-18 NEF .531 .438 .879 1.553 1.216 1.1875-18 NEF
20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 NEF .531 .531 1.014 1.703 1.332 1.1875-18 NEF
22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 NEF .531 .531 1.134 1.703 1.460 1.4375-18 NEF
24 1.375 1.500 1.688 1.875 1.500 .650 .650 1.125 .589 .556 1.4375-18 NEF .498 .498 1.259 1.765 1.585 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS/”F” Class “e”,
MS/”E” Class “P”, MS/”P” Class “J” Class “PG”
C
Thread
D
Min.
G
Max.
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
DN
Max.
XL
Max.
B
Thread
L
Max.
Closed Free
6 - - - - - - 1.266 .440 .192 1.438 .484 - - - - - -
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 .547 2.271 M12x1.5-6H .936
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 .675 2.271 M16x1.5-6H .936
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 .812 2.411 M16x1.5-6H .936
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 .940 2.599 M18x1.5-6H .936
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 1.067 2.943 M22x1.5-6H .936
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 1.194 3.172 M25x1.5-6H .936
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 1.322 3.610 M25x1.5-6H 1.180
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 1.449 3.766 M32x1.5-6H 1.180
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 1.576 3.985 M32x1.5-6H 1.180
All dimensions for reference only.
To complete part number see how to order on page 25.
■ (MMC) located within .0025 of (TP)
N D
V
L
.375 MIN
G
L
C
ND H
L
NN
L
D
TERMINATION ASSEMBLIES
“A” General Duty/
“C”Pressurized“
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal “P” Potting Boot
PT00A-XX-XXX
SP00A-XX-XXX
PT00C-XX-XXX
PT00A-XX-XXX (SR)
SP00A-XX-XXX (SR)
PT00E-XX-XXX (SR)
SP00E-XX-XXX (SR)
PT00P-XX-XXX (SR)
SP00P-XX-XXX (SR)
MS3110F-XX-XXX
PT00E-XX-XXX
SP00E-XX-XXX
MS3110E-XX-XXX
PT00P-XX-XXX
SP00P-XX-XXX
MS3110P-XX-XXX
PURCHASED
RELEASED / Dec . 21 2015, 2:09:12 PM
“PG” Cable Gland Seal
PT00PG-XX-XXX
ND
L
ND
XL
“J” Cable Seal
MS3110J-XX-XXX
14
PT01 (MS3111)
cable connecting receptacle
S
S
Y
A
K
Z
M
L
Q
Shell
Size
Receptacle
Front View Receptacle Side View Class “A”, “C”
S
±.020
Y
±.020
A
+.001
-.005
K
+.020
-.010 L Max.
M
+.016
-.000
Q
Thread
Class 2A
Z
Max.
D
Min.
L
Max.
N
Max.
V
Thread
Class A
6 .688 .812 .348 .494 .906 .400 .3125-32 NEF .948 .175 1.553 .462 .3750-32 NEF
8 .812 .938 .473 .494 .906 .400 .4375-28 UNEF .948 .297 1.553 .590 .5000-28 UNEF
10 .938 1.062 .590 .494 .906 .400 .5625-24 NEF .948 .421 1.553 .717 .6250-24 NEF
12 1.031 1.156 .750 .494 .906 .400 .6875-24 NEF .948 .546 1.553 .834 .6250-24 NEF
14 1.125 1.250 .875 .494 .906 .400 .8125-20 UNEF .948 .663 1,553 .970 .8750-20 UNEF
16 1.219 1.344 1.000 .494 .906 .400 .9375-20 UNEF .948 .787 1.553 1.088 1.0000-20 UNEF
18 1.312 1.438 1.125 .494 .906 .400 1.0625-18 NEF .948 .879 1.553 1.216 1.1875-18 NEF
20 1.438 1.562 1.250 .650 1.125 .535 1.1875-18 NEF 1.166 1.041 1.703 1.332 1.1875-18 NEF
22 1.562 1.688 1.375 .650 1.125 .535 1.3125-18 NEF 1.166 1.135 1.703 1.460 1.4375-18 NEF
24 1.688 1.812 1.500 .683 1.188 .568 1.4375-18 NEF 1.166 1.259 1.703 1.585 1.4375-18 NEF
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS/”F” Class “e”,
MS/”E” Class “P”, MS/”P” Class “J” Class “PG”
C
Thread
D
Min.
G
Max.
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
DN
Max.
XL
Max.
B
Thread
L
Max.
Closed Free
6 - - - - - - 1.266 .440 .192 1.438 .484 - - - - - -
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 .547 2.271 M12x1.5-6H .936
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 .675 2.271 M16x1.5-6H .936
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .548 .338 .442 .812 2.411 M16x1.5-6H .936
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .673 .416 .539 .940 2.599 M18x1.5-6H .936
16 6-32 .615 .500 1.188 2,047 1.047 1.266 1.057 .798 1.438 .798 .550 .616 1.067 2.943 M22x1.5-6H .936
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 .899 .600 .672 1.194 3.172 M25x1.5-6H .936
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.024 .635 .747 1.322 3.610 M25x1.5-6H 1.180
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.149 .670 .846 1.449 3.766 M32x1.5-6H 1.180
24 8-32 .990 .800 1.719 2.406 1.543 1.516 1.555 1.274 1.717 1.274 .740 .894 1.576 3.985 M32x1.5-6H 1.180
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 25.
All dimensions for reference only.
N D
.375 MIN
V
L
G
L
C
ND H
L
NN
L
D
TERMINATION ASSEMBLIES
“A” General Duty “A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal “P” Potting Boot
PT01A-XX-XXX PT01A-XX-XXX (SR)
PT01E-XX-XXX (SR)
PT01P-XX-XXX (SR)
MS3111F-XX-XXX
PT01E-XX-XXX
MS3111E-XX-XXX PT01P-XX-XXX
MS3111P-XX-XXXX
PURCHASED
RELEASED / Dec . 21 2015, 2:09:12 PM
“PG” Cable Gland Seal
PT01PG-XX-XXX
ND
L
ND
XL
“J” Cable Seal
MS3116J-XX-XXX
15
PT02 (MS3112)
SP02
box mounting receptacle
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
A N
K Z
L
M
4 Holes
To complete part number see how to order on page 25.
■ (MMC) located within .0025 of (TP)
*ThePT02andSP02boxmountingreceptaclesaremadeonlytocompleteaseries;
no provision is made for accessories or potting on the rear skirt.
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) S A
+.001
-.005
K
+.020
-.010 L Max.
M
+.031
-.000
N
Dia.
Max.
Z
Max.
PT SP PT SP PT SP PT SP PT SP
6 .469 .641 .688 .953 .348 .493 .524 .825 .431 .462 .323 .465 .438
8 .594 .734 .812 1.047 .473 .493 .524 .825 .431 .462 .449 .465 .438
10 .719 .812 .938 1.125 .590 .493 .524 .825 .431 .462 .573 .465 .438
12 .812 .938 1.031 1.250 .750 .493 .524 .825 .431 .462 .699 .465 .438
14 .906 1.031 1.125 1.344 .875 .493 .524 .825 .431 .462 .823 .465 .438
16 .969 1.125 1.219 1.438 1.000 .493 .524 .825 .431 .462 .949 .465 .438
18 1.062 1.219 1.312 1.516 1.125 .493 .524 .825 .431 .462 1.073 .465 .438
20 1.156 1.312 1.438 1.672 1.250 .650 .650 1.076 .556 .556 1.199 .526 .531
22 1.250 1.438 1.562 1.750 1.375 .650 .650 1.076 .556 .556 1.323 .526 .531
24 1.375 1.562 1.688 1.875 1.500 .683 .683 1.109 .589 .589 1.449 .493 .497
All dimensions for reference only.
PT02A-XX-XXX
SP02A-XX-XXX
* PT02C-XX-XXX
* SP02C-XX-XXX
* PT02E-XX-XXX
* SP02E-XX-XXX
MS3112E-XX-XXX
* PT02P-XX-XXX
* SP02P-XX-XXX
MS3112P-XX-XXX
16
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS/”F” Class “e”,
MS/”E” Class “P”, MS/”P” Class “J” Class “PG”
C
Thread
D
Min.
G
Max.
H
Max.
L
Max.
N
Max.
L
Max.
N
Max.
D
Min.
L
Max.
N
Max.
DN
Max.
XL
Max.
B
Thread
L
Max.
Closed Free
6 - - - - - - 1.266 .440 .192 1.438 .484 - - - - - -
8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 .547 2.271 M12x1.5-6H .936
10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 .675 2.271 M16x1.5-6H .936
12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 .812 2.411 M16x1.5-6H .936
14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 .940 2.599 M18x1.5-6H .936
16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 1.067 2.943 M22x1.5-6H .936
18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 1.194 3.172 M25x1.5-6H .936
20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 1.322 3.610 M25x1.5-6H 1.180
22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 1.449 3.766 M32x1.5-6H 1.180
24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 1.576 3.985 M32x1.5-6H 1.180
PT06 (MS3116)
SP06
straight plug
S
To complete part number see how to order on page 25.
Shell
Size
Plug Front View Plug Side View Class “A”
S
Max. JL
Max.
Q Thread
Class 2A
Z
Max.
D
Min.
L
Max.
N
Max.
V Thread
Class A
6 .625 .353 .906 .3125-32 NEF .594 .175 1.609 .462 1.4375-18 NEF
8 .750 .353 .906 .4375-28 UNEF .594 .297 1.609 .590 .5000-28 UNEF
10 .859 .353 .906 .5625-24 NEF .594 .421 1.609 .717 .6250-24 NEF
12 1.013 .353 .906 .6875-24 NEF .594 .546 1.609 .834 .7500-20 UNEF
14 1.156 .353 .906 .8125-20 UNEF .594 .663 1.609 .970 .8750-20 UNEF
16 1.281 .353 .906 .9375-20 UNEF .594 .787 1.609 1.088 1.0000-20 UNEF
18 1.391 .353 .906 1.0625-18 NEF .594 .879 1.609 1.216 1.1875-18 NEF
20 1.531 .415 1.062 1.1875-18 NEF .672 1.014 1.656 1.332 1.1875-18 NEF
22 1.656 .415 1.062 1.3125-18 NEF .672 1.135 1.656 1.460 1.4375-18 NEF
24* 1.776 .415 1.125 1.4375-18 NEF .672 1.259 1.750 1.587 1.4375-18 NEF
All dimensions for reference only.
N D
.375 MIN
V
L
G
L
C
ND H
L
NN
L
D
TERMINATION ASSEMBLIES
“A” General Duty “A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal “P” Potting Boot
PT06A-XX-XXX
SP06A-XX-XXX
PTG06A-XX-XXX
PT06A-XX-XXX (SR)
SP06A-XX-XXX (SR)
PTG06A-XX-XXX (SR)
PT06E-XX-XXX (SR)
SP06E-XX-XXX (SR)
PTG06E-XX-XXX (SR)
PT06P-XX-XXX (SR)
SP06P-XX-XXX (SR)
PTG06P-XX-XXX (SR)
MS3116F-XX-XXX
PT06E-XX-XXX
SP06E-XX-XXX
PTG06E-XX-XXX
MS3116E-XX-XXX
PT06P-XX-XXX
SP06P-XX-XXX
PTG06P-XX-XXX
MS3116P-XX-XXX
PURCHASED
RELEASED / Dec . 21 2015, 2:09:12 PM
“PG” Cable Gland Seal
PT06PG-XX-XXX
ND
L
ND
XL
“J” Cable Seal
MS3116J-XX-XXX
17
PT07 (MS3114)
SP07
jam nut receptacle S
H
SJA
M
Z
RPK
To complete part number see how to order on page 25.
Shell
Size
Class “A” (SR), “E” (SR), “P” (SR), MS/”F” Class “E” (SR) Class “P”, MS/”P”
C
Thread D Max. G H L M C
Thread
D
Max. G H L M D
Max.
L +.010
-.026 M N Z
6 - - - - - - - - - - - - .202 .593 .696 .484 .191
8 6-32 .250 .125 .781 1.062 .696 6-32 .250 .125 .775 1.029 .696 .327 .593 .696 .608 .191
10 6-32 .312 .188 .844 1.062 .696 6-32 .312 .188 .837 1.029 .696 .444 .593 .696 .734 .191
12 6-32 .438 .312 .969 1.062 .696 6-32 .438 .312 .963 1.029 .696 .558 .593 .696 .858 .191
14 6-32 .562 .375 1.094 1.062 .696 6-32 .562 .375 1.087 1.029 .696 .683 .593 .696 .984 .191
16 6-32 .625 .500 1.156 1.188 .696 6-32 .625 .500 1.150 1.161 .696 .808 .593 .696 1.110 .191
18 8-32 .750 .625 1.406 1.188 .696 8-32 .750 .625 1.400 1.161 .696 .909 .593 .696 1.234 .191
20 8-32 .750 .625 1.406 1.250 .884 8-32 .750 .625 1.400 1.224 .884 1.034 .718 .884 1.360 .221
22 8-32 .938 .750 1.594 1.250 .884 8-32 .938 .750 1.587 1.224 .884 1.159 .718 .884 1.484 .221
24 8-32 1.000 .800 1.594 1.250 .917 8-32 1.000 .800 1.681 1.320 .917 1.284 .718 .917 1.610 .188
Shell
Size
Recept. Front View Receptacle Side View Class “E”, MS/”E”
H
±.016 S
A Dia.
+.001
-.005
J Flat
+.000
-.010
K
+.011
-.010
M
Panel Thickness R Thread
Class 2A
UNEF
Z
Max.
L
Max. MN
Max.
Z
±.040
Min. Max.
6 .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 .231 .568 .696 .604 .191
8 .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 .231 .568 .696 .729 .191
10 .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 .231 .568 .696 .854 .191
12 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 .231 .568 .696 .979 .191
14 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 .231 .568 .696 1.104 .191
16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 .231 .568 .696 1.229 .191
18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 .231 .568 .696 1.354 .191
20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 .261 .630 .884 1.510 .221
22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 .261 .630 .884 1.635 .221
24 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 .228 .660 .917 1.760 .188
*Size24strainreliefavailableinPTonly Alldimensionsforreferenceonly.
JN
A
M Z
RP L
JA
M Z
C
RP L
G D H JA
M Z
RP L
D N
TERMINATION ASSEMBLIES
“A” (SR), “E” (SR), “P” (SR),
MS / “F” Strain Relief
“E” Open Wire Seal “P” Potting Boot
“A” General Duty/
“C”PressurizedReceptacle
PT07A-XX-XXX
PT07C-XX-XXX
PT07E-XX-XXX
SP07E-XX-XXX
MS3114E-XX-XXX
PT07A-XX-XXX (SR)
SP07A-XX-XXX (SR)
PT07E-XX-XXX (SR)
MS3114F-XX-XXX
PT07P-XX-XXX
MS3114P-XX-XXX
18
PT08 E
SP08 E
90 degree plug
G
Shell
Size
Plug
Front
View
Plug Side View
G
Dia.
Max
Class “E”, “E” (SR) Class “P”
B
±.031
C
+.010
-.025
D
±.062
E
+.047
-.025
L
±.057
A
±.025
H
±.015
K
±.015
L
Max.
8 .796 .655 .169 .941 .339 1.786 .469 .312 .438 1.656
10 .921 .749 .170 1.191 .393 1.880 .547 .438 .562 1.781
12 1.046 .812 .264 1.191 .450 1.965 .625 .516 .688 1.843
14 1.171 .905 .310 1.254 .519 2.113 .734 .625 .781 1.953
16 1.297 1.030 .330 1.316 .583 2.315 .750 .656 .890 2.000
18 1.422 1.015 .444 1.562 .621 2.423 .781 .703 1.000 2.046
20 1.562 1.077 .510 1.625 .683 2.695 .859 .766 1.125 2.218
22 1.672 1.139 .515 1.719 .739 2.742 .906 .812 1.234 2.265
24 1.797 1.265 .656 1.751 .797 2.980 1.169 .918 1.374 2.624
All dimensions for reference only.
D
C
B
E
L
A
H
K
L
TERMINATION ASSEMBLIES“E” Open Wire Seal, “E” (SR)
Strain Relief “P” Potting Boot 75 degrees
PT08E-XX-XXX
SP08E-XX-XXX
PT08E-XX-XXX (SR)
SP08E-XX-XXX (SR)
PT08P-XX-XXX
SP08P-XX-XXX
To complete part number see how to order on page 25.
All lockwire holes are .044 Dia. Min.
19
PT Connectors with
Printed Circuit Board Contacts
Shell
Size
Part Number*
PT02 with PCB
Contacts
Receptacle Front View Receptacle Side View
R
(TP)
S
+.011
-.010
A
+.001
-.005
K
+.021
-.010
L
Max.
M
+.031
-.000
N
Dia.
Max.
Z
+.040
-.050
6 71-570120-XXX .469 .688 .348 .493 .825 .431 .323 .380
8 71-570121-XXX .594 .812 .473 .493 .825 .431 .449 .380
10 71-570122-XXX .719 .938 .590 .493 .825 .431 .573 .380
12 71-570123-XXX .812 1.031 .750 .493 .825 .431 .699 .380
14 71-570124-XXX .906 1.125 .875 .493 .825 .431 .823 .380
16 71-570125-XXX .969 1.219 1.000 .493 .825 .431 .949 .380
18 71-570126-XXX 1.062 1.312 1.125 .493 .825 .431 1.073 .380
20 71-570127-XXX 1.156 1.438 1.250 .650 1.076 .556 1.199 .286
22 71-570128-XXX 1.250 1.562 1.375 .650 1.076 .556 1.323 .286
24 71-570129-XXX 1.375 1.688 1.500 .683 1.109 .589 1.449 .253
Box Mounting Receptacle (PT02)
with PCB Contacts
Orderbyapplicablepartnumberinchartbelow;
add insert arrangement number. Refer to insert availability
on pages 4-10.
■ (MMC) located within .0025 of (TP)
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
A N
K Z
L
M
4 Holes
All dimensions for reference only.
Shell
Size
Part Number*
PT02 with PCB
Contacts
Receptacle Front View Receptacle Side View
H
+.017
-.016
S
±.010
A Dia.
+.001
-.005
J Flat
+.000
-.010
K
+.011
-.010
M
±.010
P Panel
Thickness R
Thread
Class 2A
Z
+.025
-.035
Min. Max.
6 71-533720-XXX .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 UNEF .376
8 71-533721-XXX .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 UNEF .376
10 71-533722-XXX .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 UNEF .376
12 71-533723-XXX 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 UNEF .376
14 71-533724-XXX 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF .376
16 71-533725-XXX 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 UNEF .376
18 71-533726-XXX 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 UNEF .376
20 71-533727-XXX 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 UNEF .367
22 71-533728-XXX 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 UNEF .367
24 71-533729-XXX 1.816 2.062 1.500 1.556 .156 .917 .062 .250 1.6250-18 UNEF .334
Jam Nut Receptacle (PT07)
with PCB Contacts
All lockwire holes are .044 Dia. Min.
Orderbyapplicablepartnumberinchartbelow;
add insert arrangement number. Refer to insert availability
on pages 4-10.
* For RoHS compliance connectors with PCB contacts change “71”- to:
“FL”designatesconductivegrayzincnickelplating
“93”designatesblackzinccobaltplating
S
H
SJA
M
Z
RPK
All dimensions for reference only.
20
PTB
SPB
thru bulkhead receptacle
S
S
R
(TP)
R
(TP)
PTB
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SPB
.150 ± .005 Dia.
L
M
P
AA
K
4 Holes
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP) SA
+.001
-.005
K
+.016
-.000
L
±.005
M
+.010
-.000
P
Max.
PTB SPB PTB SPB PTB SPB
6 .469 .641 .688 .953 .348 .625 1.050 .562 .125 .188
8 .594 .734 .812 1.047 .473 .625 1.050 .562 .125 .188
10 .719 .812 .938 1.125 .590 .625 1.050 .562 .125 .188
12 .812 .938 1.031 1.250 .750 .625 1.050 .562 .125 .188
14 .906 1.031 1.125 1.344 .875 .625 1.050 .562 .125 .188
16 .969 1.125 1.219 1.438 1.000 .625 1.050 .562 .125 .188
18 1.062 1.203 1.312 1.516 1.125 .625 1.050 .562 .125 .188
20 1.156 1.297 1.438 1.672 1.250 .781 1.330 .688 .125 .312
22 1.250 1.375 1.562 1.750 1.375 .781 1.330 .688 .125 .312
24 1.375 1.500 1.688 1.875 1.500 .781 1.330 .688 .125 .312
* To complete part number add desired arrangement number (refer to pages 4 and 5 for insert
availability)andadd“PS”;
Example: PTB-18-32PS. If a rotation is required, use PTB-18-32PS and add W, X, Y or Z. Example:
PTB-18-32 PSW.
The socket end of the insert always appears at the “P” dimension end of shell.
■(MMC) located within .0025 of (TP)
All dimensions for reference only.
* PTB-XX-XXX
* SPB-XX-XXX
21
PT
hermetic
Three shell styles are available in the hermetic PT
bayonet series:
• PTIH (MS3113H)
• PT02H
• PT07H (MS3114H)
These hermetic connectors are only available with solder cup or
ateyeletpincontactsintheMS/PTversion.Socketcontacts
are available in some proprietary PT versions. Other design
characteristics of the PT hermetic connector series are as
follows:
Shellsizes:8through24(tinplated)
Contact count: 2 through 61. Refer to pages 4 and 5 for insert
availability for hermetics.
Current:5.0ampeach#20contact
10ampeach#16contact
17ampeach#12contact
ContactsaretinplatedforPT;goldisoptional
DielectricWithstandingVoltage(sealevel):
1500 volts (RMS) 60 cps, Service Rating I
2300 volts (RMS) 60 cps, Service Rating II
Compression glass inserts, permanently lettered
Helium Leakage: Less than 1.0 X 10-6 cc/sec.
at15psidierential
Physical Shock: 100 G’s
Vibration: ExceedsMIL-E-5272ProcedureII
Thermal Shock: No deterioration or failure after 5 cycles
at –55°F to +257°F
Intermateability: Mates with MS3116 and PT06
Refer to pages 4-10 for insert arrangement availability.
solder
mounting
receptacle
box mounting
receptacle
jam nut
receptacle
22
PTIH (MS3113H)
hermetic solder mounting receptacle
G
A N
WL
Z
.031 +.006
–.005
Shell Size
Recept.
Front View Receptacle Side View
G Dia.
Max.
A Dia.
+.001
-.005
L
+.025
-.016
N Dia.
+.001
-.005
W
+.001
-.010
Z
Max.
6 .511 .348 .447 .438 .094 .386
8 .636 .473 .447 .562 .094 .386
10 .761 .590 .447 .672 .094 .386
12 .855 .750 .447 .781 .094 .386
14 .980 .875 .447 .906 .094 .386
16 1.105 1.000 .447 1.031 .094 .386
18 1.229 1.125 .447 1.156 .094 .386
20 1.323 1.250 .509 1.250 .094 .386
22 1.449 1.375 .509 1.375 .125 .418
24 1.574 1.500 .542 1.500 .125 .418
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
All dimensions for reference only.
* PTIH-XX-XXX
** PTIY-XX-XXX
** MS3113H-XXCXXX
† PTIH-XX-XXX (100)
†† PTIY-XX-XXX (100)
†† MS3113H-XXYXXX
23
PT02H
hermetic box mounting receptacle
S
S
R
(TP)
R
(TP)
PT
.120 ± .005 Dia.
(.147 ± .005 Dia., size 24)
SP
.150 ± .005 Dia.
A N
WL
ZU
4 Holes
Shell Size
Recept. Front View Receptacle Side View
R
(TP)
S
±.016
A Dia.
+.001
-.005
K
±.015
L
+.025
-.015
N Dia.
+.001
-.005
U
+.011
-.010
Z
Max.
6 .469 .688 .348 .047 .494 .438 .062 .344
8 .594 .812 .473 .047 .494 .562 .062 .344
10 .719 .938 .590 .047 .494 .672 .062 .344
12 .812 1.031 .750 .047 .494 .781 .062 .344
14 .906 1.125 .875 .047 .494 .906 .062 .344
16 .969 1.219 1.000 .047 .494 1.031 .062 .344
18 1.062 1.312 1.125 .047 .494 1.156 .062 .344
20 1.156 1.438 1.250 .047 .556 1.250 .062 .344
22 1.250 1.562 1.375 .079 .556 1.375 .062 .377
24 1.375 1.688 1.500 .079 .588 1.500 .062 .377
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
■ (MMC) located within .0025 of (TP)
All dimensions for reference only.
* PT02H-XX-XXX
** PT02Y-XX-XXX
† PT02H-XX-XXX (100)
†† PT02Y-XX-XXX (100)
24
PT07H (MS3114H)
hermetic jam nut receptacle
S
H
SA
M Z
RPK
Shell
Size
Recept. Front View Receptacle Side View
S
±.016
H Hex
+.017
-.016
A
+.001
-.005
K
+.043
-.016
M
+.031
-.000
P Panel Thickness R
Thread
Class 2A
Z Max.
Max. Min.
6 .812 .625 .348 .094 .696 .125 .062 .4375-28 UNEF .206
8 .938 .750 .473 .094 .696 .125 .062 .5625-24 NEF .206
10 1.062 .875 .590 .094 .696 .125 .062 .6875-24 NEF .206
12 1.250 1.062 .750 .094 .696 .125 .062 .8750-20 UNEF .206
14 1.375 1.188 .875 .094 .696 .125 .062 1.0000-20 UNEF .206
16 1.500 1.312 1.000 .094 .696 .125 .062 1.1250-18 NEF .206
18 1.625 1.438 1.125 .094 .696 .125 .062 1.2500-18 NEF .206
20 1.812 1.562 1.250 .125 .884 .250 .062 1.3750-18 NEF .081
22 1.938 1.688 1.375 .125 .884 .250 .062 1.5000-18 NEF .081
24 2.062 1.812 1.500 .125 .917 .250 .062 1.6250-18 NEF .048
To complete part number see how to order on page 25.
* Solder cup pin contacts without interfacial seal
** Solder cup pin contacts with interfacial seal
† Flat eyelet pin contacts without interfacial seal
†† Flat eyelet pin contacts with interfacial seal
All dimensions for reference only.
* PT07H-XX-XXX
** PT07Y-XX-XXX
** MS3114H-XXCXXX
† PT07H-XX-XXX (100)
†† PT07Y-XX-XXX (100)
†† MS3114H-XXYXXX
25
PT, SP, MS/PT
how to order
1. 2. 3. 4. 5. 6. 7. 8.
Connector Type Shell Style Service Class Shell Size Insert
Arrangement Contact Configuration Insert Rotation Finish
PT 00 A 20 41 P W 003
1. Connector Type
PT standard olive drab, electrically conductive cadmium
plate bayonet lock connector with solder contacts
SP
electrically non-conductive, hard anodic coated bay-
onet lock connector with solder contacts and larger
ange and mounting holes for back panel mounting
PTG plug with grounding ngers
4. Shell Size
Shell sizes 6 - 24 available
2. Shell Style
00 Wall mounting receptacle
01 Cable connecting receptacle
02 Box mounting receptacle
06 Straight plug
07 Jam nut receptacle
08 90 degree plug cable support
Bthru bulkhead receptacle (pressurized)
ISolder mount receptacle (Hermetic only)
6. Contact Configuration
PPin contacts
SSocket contacts
For ordering connectors with printed circuit board
contacts, see pg. 19.
3. Service Class
AGeneral duty back shell
CPressurized receptacle
EEnvironmental resisting open wire seal with grom-
met and nut
PAssembly with potting boot
PG Adapter for cable glad for moisture proong
jacketed cables
HHermetic* without interfacial seal
YHermetic* with interfacial seal
7. Insert Rotation
No letter is required for normal position
W
Refer to page 6
X
Y
Z
5. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
8. Finish
SR Designates a strain relief clamp
Indicate optional nishes as follows:
100 Sufx added for at eyelet pin contacts in hermetic
versions
OR
005 * Anodic coating - Alumilite® (standard on “SP”)
023 * Electroless nickel
025 Black zinc cobalt plating
072 * Conductive gray zinc nickel plating
424 * Electroless nickel nish with strain relief
470 Black zinc cobalt plating with strain relief
725 Gray zinc nickel plating with strain relief
*RoHSCompliantnish
Note: Olive drab cadmium is the default plating. If required on SP
typeusesux(003).
PT,SP
Ex: PT00A-20-41PW003
1. 2. 3. 4. 5. 6. 7. 8.
Connector Type Specification
Number Shell Style Service Class Shell Size Insert Arrangment Contact
Configuration Insert Rotation
MS 311 0 E 20 41 P W
1. Connector Type
MS Military standard
5. Shell Size
Shell sizes 8 - 24 available
3. Shell Style
0Wall mounting receptacle
1Cable connecting receptacle
2Box mounting receptacle
3Solder mount receptacle (Hermetic only)
4Jam nut receptacle
6Straight plug
7. Contact Configuration
PPin contacts
SSocket contacts
For ordering connectors with printed circuit board
contacts, see pg. 19.
4. Service Class
EEnvironmental resisting connector
FEnvironmental resisting connectors
with strain relief
JClamp assembly for moisture proong
multi-jacketed cables, with strain relief
PPotted type with potting boot
HHermetic
8. Insert Rotation
No letter is required for normal position
W
Refer to page 6
X
Y
Z
MS/PT
MIL-DTL-26482, Series 1
Ex: MS3110E20-41PW
2. Specification Number
311 Basic family number for
MIL-DTL-26482, Series 1 solder type
6. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
Hermetic Version:
In this version a letter replaces the hyphen between the
Shell Size and Insert Arrangement (Steps 5 and 6)
YFlat eyelet pin contacts
CSolder cup pin contacts
* Hermetic connectors are supplied with tin plated shells.
** This connector style is sometimes referred to as a cable
connecting “plug”. It does, however, mate with either a
straight or 90 degree plug.
26
Amphenol PT-SE, SP-SE, MS/PT-SE
Proprietary/MIL-DTL-26482, Series 1
bayonet coupling and crimp termination
Amphenol® SE crimp type miniature connectors provide
performance and versatility needed for applications
demanding high reliability and crimp removable contacts.
These crimp contacts are rear insertable/front release and
are held in position by an MS approved spring tower
retention system.
TheMS/PT-SESeriesisqualiedtoMIL-DTL-26482,Series1andhasallthe
outstanding design characteristics and quality of the PT Series.
TheSP-SESeriesisamodicationofthePT-SE,providingspecialshellswitha
widemountingangeforbackpanelmounting.
Acorrosionresistantelectricallyconductivenishofcadmiumplatewithan
olive drab chromate after-treatment is used on the PT-SE and MS/PT-SE. The
SP-SE is given a durable non-conductive hard anodic “Alumilite”® coating
which provides abrasion protection and resistance to corrosion.
500 hour corrosion resistance, RoHS compliant harsh environment conductive
plating. Gray Zinc over an Electroless Nickel (Gray ZnNi) base, with a Light Gun
Metal Gray appearance.
Shell components for these series are aluminum. The dependable 5 key/
keywaypolarizationwithbayonetlockcouplingassurespositivematingwith
no chance of cross plugging. Spring tension provided by a wave washer in the
coupling nut
ensures maintenance of interfacial seal between mating halves.
Both the insert and main joint gasket are molded from resilient neoprene.
This provides excellent moisture sealing at the gasket and superior electrical
isolation of the contact in the insert.
Both pins and sockets are machined from a copper alloy and are gold plated.
Thisgoldplatingeliminatescontactcorrosionandoersanindeniteshelf
life. Socket contacts for these series are closed entry design.
Breakaway style plug is available in PT-SE crimp.
The PT-SE, SP-SE and MS/PT-SE Series are intermateable and intermountable
with all existing Miniature Cylindrical Series connectors.
Refer to pages 4-10 for insert arrangement availability.
* This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
wall mounting
receptacle
cable
connecting
receptacle*
box mounting
receptacle
straight plug
jam nut
receptacle
27
“SE”,
MS / “E”
open wire seal
“SE” (SR),
MS / “F”
strain relief
clamp
“SP”,
MS / “P”
potting boot
PT-SE, SP-SE, MS/PT-SE
Contact Specifications
Contact Size Test Current Maximum
Millivolt Drop†
Crimp Well
Diameter
Minimum Well
Depth
20 7.5 55 .049±.001 .267
16 13.0 49 .067±.001 .236
12 23.0 42 .100±.002 .236
Service Rating
Service
Rating
Recommended
Operating AC
Voltage at Sea
Level
Test Voltage AC (RMS), 60 cps
Sea Level 50,000 ft. 70,000 ft. 110,000 ft.
I 600 1,500 500 375 200
II 1,000 2,300 750 500 200
† Silver plated wire per MIL-DTL-26482
PT-SE and SP-SE Service Classes
PT-SE and SP-SE connectors are available in the three
service classes listed below.
“SE” Open wire sealing - environmental resistant,
withanutandgrommetformoistureproong
individual wires
“SE (SR)“ Strain relief clamp - environmental resistant
strain relief clamp and grommet for moisture
proongindividualwires;providesadded
wire bundle support
“SP” Translucent nylon boot for retaining customer
appliedpottingcompounds;heldinplaceby
a threaded ring
MS/PT-SE Service Classes
MS-SE series connectors are available in the following
certiedserviceclasses:
“E” Open wire sealing - environmental resisting
connectors are supplied with a multi-hole
grommet and clamping nut for moisture
proongindividualopenwires
“F” Environmental resistant strain relief clamp
andgrommetformoistureproongindividual
wires;providesaddedwirebundlesupport
“P” Potting applications - these connectors are
supplied with a translucent nylon boot for retention
of customer applied potting compound
28
PT00 SE (MS3120)
SP00 SE
wall mounting receptacle
S
S
R
(TP)
R
(TP)
T Dia.
4 Holes
Shell
Size
Receptacle Front View Receptacle Side View
R
(TP)
S
Max.
T Dia.
±.005
A Dia.
+.001
-.005
K
±.016
M
+.010
-.000
P*
Panel Thickness
PT SP PT SP PT SP PT SP PT SP
8 .594 - .828 - .120 - .473 .062 .431 - .094 -
10 .719 .812 .954 1.141 .120 .150 .590 .062 .431 .462 .094 .125
12 .812 .938 1.047 1.226 .120 .150 .750 .062 .431 .462 .094 .125
14 .906 1.031 1.141 1.360 .120 .150 .875 .062 .431 .462 .094 .125
16 .969 1.125 1.234 1.453 .120 .150 1.000 .062 .431 .462 .094 .125
18 1.062 1.203 1.328 1.532 .120 .150 1.125 .062 .431 .462 .094 .125
20 1.156 1.297 1.453 1.688 .120 .150 1.250 .094 .556 .556 .219 .219
22 1.250 1.375 1.578 1.766 .120 .150 1.375 .094 .556 .556 .219 .219
24 1.375 1.500 1.703 1.891 .147 .150 1.500 .094 .589 .589 .219 .219
Shell
Size
Class “SE”, MS/”E” Class “SE”(SR), MS/”F” Class “SP”, MS/”P”
L
Max.
N Dia.
Max
G
Dia.
L
Max.
N
Max.
D Dia.
Max.
L
Max.
N Dia.
Max.
8 1.328 .560 .125 2.422 .781 - - -
10 1.328 .704 .188 2.422 .844 .444 1.656 .734
12 1.328 .825 .312 2.422 .969 .558 1.656 .858
14 1.328 .954 .375 2.422 1.094 .683 1.656 .984
16 1.328 1.080 .500 2.537 1.156 .808 1.656 1.110
18 1.328 1.204 .625 2.537 1.406 .909 1.656 1.234
20 1.359 1.330 .625 2.824 1.406 1.034 1.750 1.360
22 1.359 1.454 .750 2.824 1.594 1.159 1.750 1.484
24 1.422 1.580 .800 2.900 1.688 1.284 1.782 1.610
* Back panel mounting
All dimensions for reference only.
To complete part number see how to order on page 36.
■(MMC) located within .005 of (TP)
A
M
K
N
L
“SE” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP” Potting Boot
PT00SE-XX-XXX
SP00SE-XX-XXX
MS3120E-XX-XXX
PT00SE-XX-XXX (SR)
SP00SE-XX-XXX (SR)
MS3120F-XX-XXX
PT00SP-XX-XXX
SP00SP-XX-XXX
TERMINATION ASSEMBLIES
29
MF00 SE (MS3128)
wall mounting receptacle
S
S
R
(TP)
R1
(TP)
R
(TP) R1
(TP)
T Dia.
4 Holes
T1 Dia.
4 Holes
Shell
Size
Receptacle Front View Receptacle Side View
RR1S
Max.
T Dia.
±.005
T1 Dia.
±.005
A Dia.
+.001
-.000
K
±.016
M
+.010
-.000
Class MS/ ”E” Class MS/ “F”
L
Max.
N
Max.
F
Min.
G
Dia.
L
Max.
N
Max.
10 .719 .812 1.141 .120 .150 .590 .062 .462 1.328 .685 .297 .188 1.906 .891
12 .812 .938 1.266 .120 .150 .750 .062 .462 1.328 .813 .422 .312 1.906 1.016
14 .906 1.031 1.360 .120 .150 .875 .062 .462 1.328 .930 .547 .375 1.906 1.141
16 .969 1.125 1.453 .120 .150 1.000 .062 .462 1.328 1.057 .609 .500 2.000 1.203
18 1.062 1.203 1.532 .120 .150 1.125 .062 .462 1.28 1.175 .734 .625 2.000 1.469
20 1.156 1.297 1.688 .120 .150 1.250 .094 .556 1.359 1.301 .734 .625 2.172 1.469
22 1.250 1.375 1.766 .120 .150 1.375 .094 .556 1.359 1.428 .922 .750 2.172 1.656
24 1.375 1.500 1.891 .147 .150 1.500 .094 .589 1.422 1.533 .984 .800 2.234 1.750
All dimensions for reference only.
M K
N
A
L
TERMINATION ASSEMBLIES
“SE” Open Wire Seal MS / “F” Strain Relief
MF00SE-XX-XXX
MS3128E-XX-XXX
MF00SE-XX-XXX (SR)
MS3128F-XX-XXX
30
PT01 SE (MS3121)
SP01 SE
cable connecting receptacle
S
S
Shell
Size
Receptacle
Front View Receptacle Side View
S
Max.
Class “SE”, MS/ ”E” Class “SE” (SR), MS/”F” Class “SP”, MS/”P”
A Dia.
+.001
-.005
K
±.018
L
Max.
N Dia.
Max. G Dia. L Max. N
Max. D Dia. L
Max.
N Dia.
Max.
8 .832 .473 .094 1.522 .560 .125 2.422 .828 - - -
10 .975 .590 .094 1.522 .685 .188 2.422 .891 .444 1.656 .734
12 1.068 .750 .094 1.522 .813 .312 2.422 1.016 .558 1.656 .858
14 1.162 .875 .094 1.522 .930 .375 2.422 1.141 .683 1.656 .984
16 1.256 1.000 .094 1.522 1.057 .500 2.537 1.203 .808 1.656 1.110
18 1.349 1.125 .094 1.522 1.175 .625 2.537 1.469 .909 1.656 1.234
20 1.475 1.250 .115 1.709 1.301 .625 2.824 1.469 1.034 1.750 1.360
22 1.599 1.375 .115 1.709 1.428 .750 2.824 1.656 1.159 1.750 1.484
24 1.729 1.500 .115 1.709 1.555 .800 2.900 1.750 1.284 1.782 1.610
Note: This connector style is sometimes referred to as a cable connecting “plug”.
It does, however, mate with either a straight or 90 degree plug.
To complete part number see how to order on page 36.
All dimensions for reference only.
K K
N
A
L
A
L
DN
K
“SE” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP”, MS / “P” Potting Boot
TERMINATION ASSEMBLIES
PT01SE-XX-XXX
SP01SE-XX-XXX
MS3121E-XX-XXX
PT01SE-XX-XXX (SR)
SP01SE-XX-XXX (SR)
MS3121F-XX-XXX
PT01SP-XX-XXX
SP01SP-XX-XXX
MS3121P-XX-XXX
31
PT02 SE (MS3122)
SP02 SE
box mounting receptacle
S
S
R
(TP)
R
(TP)
T Dia.
4 Holes
L
K
M
A N
D
To complete part number see how to order on page 36.
■ (MMC) located within .0025 of (TP)
Shell
Size
Receptacle Front View Receptacle Side View
RS
Max.
T
Dia.
±.005
A
Dia.
+.001
-.005
D
Max. K
±.025
L
Max.
M
+.010
-.000
N
Dia.
+.011
-.000
PT SP PT SP PT SP PT SP PT SP
8 .594 - .828 - .120 - .473 .312 - .062 1.358 .431 - .438
10 .719 .812 .954 1.141 .120 .150 .590 .312 .219 .062 1.296 .431 .462 .562
12 .812 .938 1.047 1.266 .120 .150 .750 .312 .219 .062 1.296 .431 .462 .688
14 .906 1.031 1.141 1.360 .120 .150 .875 .312 .219 .062 1.296 .431 .462 .812
16 .969 1.125 1.234 1.453 .120 .150 1.000 .312 .219 .062 1.296 .431 .462 .938
18 1.062 1.203 1.328 1.532 .120 .150 1.125 .312 .219 .062 1.296 .431 .462 1.062
20 1.156 1.297 1.453 1.688 .120 .150 1.250 .406 .344 .094 1.358 .556 .556 1.188
22 1.250 1.375 1.578 1.766 .120 .150 1.375 .406 .344 .094 1.358 .556 .556 1.312
24 1.375 1.500 1.703 1.891 .147 .150 1.500 .406 .344 .094 1.358 .589 .589 1.438
All dimensions for reference only.
PT02SE-XX-XXX
SP02SE-XX-XXX
MS3122E-XX-XXX
32
MF02 SE (MS3127)
box mounting receptacle
S
S
R
(TP)
R1
(TP)
R
(TP) R1
(TP)
T Dia.
4 Holes
L
K
M
A N
D
T1 Dia.
4 Holes
Shell
Size
Receptacle Front View Receptacle Side View
N
Dia.
+.011
-.000
RR1S
Max.
T
±.005
T1
±.005
A
Dia.
+.001
-.005
D
Max.
K
±.016
L
Max.
M
+.010
-.000
10 .562 .719 .812 1.141 .120 .150 .590 .219 .062 1.266 .462
12 .688 .812 .938 1.266 .120 .150 .750 .219 .062 1.266 .462
14 .812 .906 1.031 1.360 .120 .150 .875 .219 .062 1.266 .462
16 .938 .969 1.125 1.453 .120 .150 1.000 .219 .062 1.266 .462
18 1.062 1.062 1.203 1.532 .120 .150 1.125 .219 .062 1.266 .462
20 1.188 1.156 1.297 1.688 .120 .150 1.250 .344 .094 1.328 .556
22 1.312 1.250 1.375 1.766 .120 .150 1.375 .344 .094 1.328 .556
24 1.438 1.375 1.500 1.891 .147 .150 1.500 .344 .094 1.328 .589
To complete part number see how to order on page 36.
■ (MMC) located within .0025 of (TP)
All dimensions for reference only.
MF02SE-XX-XXX
MS3127E-XX-XXX
33
PT06 SE (MS3126)
SP06 SE
straight plug S
To complete part number see how to order on page 36.
Shell Size
Plug Front View Plug Side View
S Dia.
Max.
Z
±.045
Z1
±.045
Class “SE”, MS/”E” Class “SE” (SR), MS/”F” Class “SP”, MS/”P”
L Max. N Max. G
Dia.
L
Max.
N
Max.
D
Dia.
L
Max.
N Dia.
Max.
8* .734 .640 .579 1.328 .540 .125 2.413 .828 .327 1.750 .578
10 .859 .640 .579 1.328 .685 .188 2.413 .891 .444 1.750 .734
12 1.031 .640 .579 1.328 .813 .312 2.413 1.016 .558 1.750 .858
14 1.156 .640 .579 1.328 .930 .375 2.413 1.141 .683 1.750 .984
16 1.281 .640 .579 1.328 1.057 .500 2.528 1.203 .808 1.750 1.110
18 1.391 .640 .579 1.328 1.175 .625 2.528 1.469 .909 1.750 1.234
20 1.531 .640 .579 1.297 1.301 .625 2.753 1.469 1.034 1.750 1.360
22 1.656 .640 .579 1.297 1.428 .750 2.753 1.656 1.159 1.750 1.484
24 1.777 .640 .579 1.359 1.533 .800 2.830 1.750 1.284 1.766 1.610
* PT-SE, MS-SE and MS-SP only.
All dimensions for reference only.
L
N
Z pin contacts
Z1 socket contacts
L
ND
Z pin contacts
Z1 socket contacts
L
NG
Z pin contacts
Z1 socket contacts
“SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP”, MS / “P” Potting Boot
TERMINATION ASSEMBLIES
PT06SE-XX-XXX
SP06SE-XX-XXX
PTG06SE-XX-XXX
MS3126E-XX-XXX
PT06SE-XX-XXX (SR)
SP06SE-XX-XXX (SR)
PTG06SE-XX-XXX (SR)
MS3126F-XX-XXX
PT06SP-XX-XXX
SP06SP-XX-XXX
PTG06SP-XX-XXX
MS3126P-XX-XXX
34
PT07 SE (MS3124)
SP07 SE
jam nut receptacle
S
H
S
Shell Size
Receptacle Front View Receptacle Side View
H Hex
Max.
S
Max.
A Dia.
+.001
-.005
J Flat
+.000
-.010
K
+.011
-.010
M
±.005
P
Panel Thickness
R
Thread
Class 2A
Min. Max.
8 .767 .954 .473 .530 .125 .696 .062 .125 .5625-24 UNEF
10 .892 1.078 .590 .655 .125 .696 .062 .125 .6875-24 NEF
12 1.079 1.266 .750 .818 .125 .696 .062 .125 .8750-20 UNEF
14 1.205 1.391 .875 .942 .125 .696 .062 .125 1.0000-20 UNEF
16 1.329 1.516 1.000 1.066 .125 .696 .062 .125 1.1250-18 NEF
18 1.455 1.641 1.125 1.191 .125 .696 .062 .125 1.2500-18 NEF
20 1.579 1.828 1.250 1.316 .156 .884 .062 .250 1.3750-18 NEF
22 1.705 1.954 1.375 1.441 .156 .884 .062 .250 1.5000-18 NEF
24 1.829 2.078 1.500 1.556 .156 .917 .062 .250 1.6250-18 NEF
Shell Size
Class “SE”, MS/”E” Class “SE” (SR), MS/”F” Class “SP”, MS/”P”
L
Max.
N
Max.
F
Min.
G Dia.
Free
L
Max.
N
Max.
G
Dia.
L
Max.
N Dia.
Max.
8 1.438 .749 .234 .125 1.922 .828 - - -
10 1.438 .874 .297 .188 1.922 .891 .444 1.656 .734
12 1.438 .999 .422 .312 1.922 1.016 .558 1.656 .858
14 1.438 1.124 .547 .375 1.922 1.141 .683 1.656 .984
16 1.438 1.249 .609 .500 2.000 1.203 .808 1.656 1.110
18 1.438 1.374 .734 .625 2.000 1.469 .909 1.656 1.234
20 1.625 1.530 .734 .625 2.172 1.469 1.034 1.922 1.360
22 1.625 1.655 .922 .750 2.172 1.656 1.159 1.922 1.484
24 1.688 1.780 .984 .800 2..234 1.750 1.284 1.951 1.610
All dimensions for reference only.
JN
A
M
K
P
R
L
JNF
A
M
R
P
K
L
JNG
A
R
M
L
P
K
“SE”, MS / “E” Open Wire Seal “SE” (SR), MS / “F” Strain Relief “SP”, MS / “P” Potting Boot
TERMINATION ASSEMBLIES
PT07SE-XX-XXX
SP07SE-XX-XXX
MS3124E-XX-XXX
PT07SE-XX-XXX (SR)
SP07SE-XX-XXX (SR)
MS3124F-XX-XXX
PT07SP-XX-XXX
SP07SP-XX-XXX
MS3124P-XX-XXX
To complete part number see how to order on page 36.
All lockwire holes are .044 Dia. Min.
35
PT08 SE
SP08 SE
90 degree plug G
To complete part number see how to order on page 36.
All lockwire holes are .044 Dia. Min.
Shell Size
Plug Front View Plug Side View
G Dia.
Max.
B
±.031
C
+.010
-.025
D
±.062
E
+.047
-.025
L
Max.
A
±.025
H
±.015
K
±.015
L
Max.
10 .921 .749 .170 1.191 .393 2.137 .547 .438 .562 2.031
12 1.046 .812 .264 1.191 .450 2.222 .625 .516 .688 2.093
14 1.171 .905 .310 1.254 .519 2.370 .734 .625 .781 2.203
16 1.297 1.030 .330 1.316 .583 2.572 .750 .656 .890 2.250
18 1.422 1.015 .444 1.562 .621 2.680 .781 .703 1.000 2.296
20 1.562 1.077 .510 1.625 .683 2.753 .859 .766 1.125 2.343
22 1.672 1.139 .515 1.719 .739 2.799 .906 .812 1.234 2.390
24 1.797 1.250 .656 1.750 .787 3.037 1.181 .918 1.374 2.624
All dimensions for reference only.
D
C
B
E
L
A
H
K
L
“SE” Open Wire Seal, “SE” (SR) Strain Relief “SP” Potting Boot 75 degreesTERMINATION ASSEMBLIES
PT08SE-XX-XXX
SP08SE-XX-XXX
PT08SE-XX-XXX (SR)
SP08SE-XX-XXX (SR)
PT08SP-XX-XXX
SP08SP-XX-XXX
36
PT-SE, SP-SE, MS/PT-SE
how to order
1. 2. 3. 4. 5. 6. 7. 8.
Connector Type Shell Style Service Class Shell Size Insert
Arrangement Contact Configuration Insert Rotation Finish
PT 00 SE 20 41 P W 003
1. Connector Type
PT standard olive drab, electrically conductive cadmium
plate bayonet lock connector with solder contacts
MF
standard olive drab, electrically conductive cadmium
plated, bayonet lock connector with dual mounting
holes, and
crimp contacts
SP
electrically non-conductive, hard anodic coated bay-
onet lock connector with solder contacts and larger
ange and mounting holes for back panel mounting
4. Shell Size
Shell sizes 8 - 24 available
2. Shell Style
00 Wall mounting receptacle
01 Cable connecting receptacle
02 Box mounting receptacle
06 Straight plug
07 Jam nut receptacle
08 90 degree plug
6. Contact Configuration
PPin contacts
SSocket contacts
3. Service Class
SE Environmental crimp
SP potted type crimp
Both of the above are Amphenol proprietary versions of the
MILDTL-26482, Series 1 crimp contact connector and offer
15 lbs. contact retention for size 20 contacts; 25 lbs. for size
16 contacts.
PG adapter for cable gland for moisture proong
jacketed cables
SQ Braided shield termination
GHeatshrink termination
7. Insert Rotation
No letter is required for normal position
W
Refer to page 6
X
Y
Z
5. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
PT-SE, SP-SE
Ex: PT00SE-20-41PW003
1. 2. 3. 4. 5. 6. 7. 8.
Connector Type Specification
Number Shell Style Service Class Shell Size Insert Arrangement Contact
Configuration Insert Rotation
MS 311 0 E 20 41 P W
1. Connector Type
MS Military standard
5. Shell Size
Shell sizes 8 - 24 available
3. Shell Style
0Wall mounting receptacle
1Cable connecting receptacle*
2Box mounting receptacle
4Jam nut receptacle
6Straight plug
7box mounting receptacle with dual mounting holes
8wall mounting receptacle with dual mounting holes
7. Contact Configuration
PPin contacts
SSocket contacts
4. Service Class
EEnvironmental resisting connector
FEnvironmental resisting connectors with strain relief
PPotted type with potting boot
SQ Braided shield termination
GHeatshrink termination
8. Insert Rotation
No letter is required for normal position
W
Refer to page 6
X
Y
Z
MS/PT-SE
MIL-DTL-26482, Series 1
Ex: MS3120E20-41PW
2. Specification Number
312 basic family for MIL-DTL-26482, Series 1 crimp type
6. Insert Arrangement
Refer to pages 4-10 for insert availability
(Use only the number following the hyphen)
* This connector style is sometimes referred to as a cable
connecting “plug”. It does, however, mate with either a
straight or 90 degree plug.
8. Finish
SR Designates a strain relief clamp
Indicate optional nishes as follows:
100 Sufx added for at eyelet pin contacts in hermetic
versions
OR
005 * Anodic coating - Alumilite® (standard on “SP”)
023 * Electroless nickel
025 Black zinc cobalt plating
072 * Conductive gray zinc nickel plating
424 * Electroless nickel nish with strain relief
470 Black zinc cobalt plating with strain relief
725 Gray zinc nickel plating with strain relief
*RoHSCompliantnish
Note: Olive drab cadmium is the default plating. If required on SP
typeusesux(003).
37
PT & SP
accessories–sealingplugs,angegaskets,
potting boots
B
DIA
A
DIA
C
.135 +.030
–.025
.130 DIA SIZE 6 TO 22
.156 DIA SIZE 24
.160 DIA 10-150949
T
15º
REF
B
L
D
E
Contact
Size
Amphenol®
Part Number
MS
Number
A
Dia.
±.010
B
Dia.
±.005
C
±.010
Color
Code
12 10-405996-12 MS27488-12 .121 .171 .564 Yellow
16 10-405996-16 MS27488-16 .083 .133 .564 Blue
20 10-405996-16 MS27488-20 .060 .090 .564 Red
SEALING PLUGS- FOR PT & SP
How to Order: Order by 10- (Proprietary) or MS part number as shown in chart
above.
Shell Size
PT
10-101949
SP
10-150949
PT & SP
10-101949
10-150949
R
±.010
S
±.010
R
±.010
S
±.010
F
+.016
-.000
T
±.008
6 .469 .688 .641 .953 .375 .024
8 .594 .812 .734 1.047 .500 .024
10 .719 .938 .812 1.125 .625 .024
12 .813 1.031 .938 1.250 .750 .024
14 .906 1.125 1.031 1.344 .875 .024
16 .969 1.219 1.125 1.438 1.000 .024
18 1.063 1.312 1.203 1.516 1.125 .024
20 1.156 1.438 1.297 1.672 1.250 .024
22 1.250 1.563 1.375 1.750 1.375 .024
24 1.375 1.688 1.500 1.875 1.500 .024
MOUNTING FLANGE GASKETS – FOR PT & SP
HowtoOrder:ForPT:10-101949-XX(completeordernumberwithdesiredshellsize).
ForSP:10-150949-XX(completeordernumberwithdesiredshellsize).
Shell
Size
B
Max.
D
±.015
E
±.015
L
Max.
8 .433 .312 .438 .766
10 .493 .438 .562 .830
12 .552 .516 .688 .861
14 .643 .625 .781 .916
16 .658 .656 .890 .936
18 .689 .703 1.000 .959
20 .750 .766 1.125 1.052
22 .794 .812 1.234 1.073
24 1.070 .918 1.374 1.310
75° POTTING BOOTS – FOR PT & SP
HowtoOrder:10-101988-XX(completeordernumberwithdesiredshellsize).
All dimensions for reference only
SEALING PLUG
MS27488-XX
10-405996-XX
MOUNTING FLANGE GASKET
10-101949-XX
10-150949-XX
75° POTTING BOOT
10-101988-XX
38
PT & SP
accessories – clamps
B D G
L
C
B D G
L
C
C
B
A
V Thread
Shell
Size
B
Max.
C Thread
Class 2B
D
Min.
G
Max.
L
Max.
8 .550 6-32 NC .240 .812 .930
10 .675 6-32 NC .302 .875 .930
12 .803 6-32 NC .428 1.000 .930
14 .920 6-32 NC .552 1.125 .930
16 1.047 6-32 NC .615 1.188 1.062
18 1.165 8-32 NC .740 1.438 1.062
20 1.291 8-32 NC .740 1.438 1.093
22 1.418 8-32 NC .928 1.719 1.093
24 1.533 8-32 NC .928 1.719 1.093
How to Order: 10-101971-XX X
Adddesired Adddesirednishsux†
shellsize “3”designatesolivedrabcadmium
“5’ designates Alumilite®
Not for use with jam nut style connectors
CLASS “E” STRAIN RELIEF CLAMP – FOR PT & SP
Shell
Size
B
Max.
C Thread
Class 2B
D
Min.
G
Max.
L
+.010
-.020
8 .540 6-32 NC .240 .812 .843
10 .665 6-32 NC .302 .875 .843
12 .793 6-32 NC .428 1.000 .843
14 .910 6-32 NC .552 1.125 .843
16 1.037 6-32 NC .614 1.188 .975
18 1.155 8-32 NC .740 1.438 .975
20 1.281 8-32 NC .740 1.438 1.007
22 1.408 8-32 NC .928 1.719 1.007
24 1.533 8-32 NC .938 1.719 1.007
CLASSES “A” & “P” STRAIN RELIEF CLAMP – FOR PT & SP
How to Order: 10-101980-XX X
Adddesired Adddesirednishsux†
shellsize “3”designatesolivedrabcadmium
“5’ designates Alumilite®
Not for use with jam nut style connectors
Shell
Size
Amphenol®
Part Number
A
±.031
B
Max.
C
Dia. Min.
V
Thread
10 97-3057-1004 .795 .842 .3125 .6250-24
12 97-3057-1007 .850 .995 .4375 .7500-20
14 97-3057-1008 .920 1.120 .5625 .8750-20
16 97-3057-1010 .920 1.216 .6250 1.0000-20
18/20 97-3057-1012 .927 1.403 .7500 1.1875-18
22/24 97-3057-1016 1.015 1.683 .9375 1.4375-18
CLASS “A” CABLE CLAMPS – FOR PT & SP
HowtoOrder:Orderby97-3057-XXXXnumberlistedabove.Standardnishis olive
drabzincalloy.ConsultAmphenol,Sidney,NYforalternatenishes.
†Standardaccessorynishesare“3”olivedrabcadmiumforPTandMS/PTtypes,
“5” Alumilite® for SP types. Electroless nickel plating is also available on some
items;consultAmphenol,Sidney,NY
All dimensions for reference only.
CLASS “E” STRAIN RELIEF CLAMP
10-101971-XX
CLASSES “A” & “P” STRAIN
RELIEF CLAMP
10-101980-XX
CLASS “A” CABLE CLAMP
97-3057-XXXX
39
Shell
Size
B Dia.
+.010
-.000
C Dia.
+.010
-.000
G
Dia.
Max.
L
+.020
-.000
X
Std. & MS
RA, CA, NA
X
MS only
RAL/CAL/NAL
6 .328 .454 .577 .563 3.000 5.000
8 .454 .578 .706 .563 3.000 5.000
10 .578 .703 .816 .563 3.000 5.000
12 .703 .891 1.000 .563 3.500 5.000
14 .844 1.016 1.128 .563 3.500 5.000
16 .969 1.141 1.257 .563 3.500 5.000
18 1.094 1.266 1.367 .563 3.500 5.000
20 1.219 1.391 1.496 .563 4.000 5.000
22 1.343 1.516 1.624 .563 4.000 5.000
24 1.453 1.614 1.747 .603 4.000 5.000
PT, SP, MS/PT
accessories – protection caps
G
L
.140
+.010
B
XX
C
N
L
.140 +.010
–.005
DIA
FOR SIZE 24
.125 +.010
–.005
DIA
FOR SIZE 6-22
RECEPTACLE PROTECTION CAPS – FOR PT, SP, MS/PT
How to Order Proprietary Receptacle Caps:
Wall Receptacle Caps: 10-101960- XX X
Cable Connecting Receptacle Caps: 10-101961- XX X
Jam Nut Receptacle Caps: 10-101964- XX X
Adddesiredshellsize
Adddesirednishsux†
“FL”designatesgrayzincnickel
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as shown
in drawing at left). For other chain options, an MS version cap should be
ordered.
HowtoOrderMSVersionReceptacleCaps:
Wall Receptacle Caps: MS3181- XX -CA for sash chain
-CAL for long sash chain
-RA for rope chain
-RAL for long rope chain
Jam Nut Recept. Caps: MS3181- XX -NA for sash chain
-NAL for long sash chain
Shellsize
MSversionsaresuppliedwithstandardanodizenishonly.Forother
nishoptionsaproprietarycapshouldbeordered.
PLUG PROTECTION CAPS – FOR PT, SP, MS/PT
Shell
Size
N Dia.
+.001
-.005
L Dia.
+.025
-.015
X
Std. & MS
CA, RA
X
MS only
CAL/ RAL
6 .348 .532 3.000 5.000
8 .473 .532 3.000 5.000
10 .590 .532 3.000 5.000
12 .750 .532 3.500 5.000
14 .875 .532 3.500 5.000
16 1.000 .532 3.500 5.000
18 1.125 .532 3.500 5.000
20 1.250 .594 4.000 5.000
22 1.375 .594 4.000 5.000
24 1.500 .627 4.000 5.000
How to Order Proprietary Plug Caps: 10-101957-XX X
Adddesiredshellsize
Adddesirednishsux†
“FL”designatesgrayzincnickel
“3” designates olive drab cadmium
“5” designates Alumilite®
Proprietary caps are supplied with standard bead chains only (as
shown in drawing at left). For other chain options an MS version
cap should be ordered.
How to Order
MSVersionPlugCaps: MS3180-XX-CAforsashchain
-CAL for long sash chain
-RA for rope chain
ShellSize -RALforlongropechain
RECEPTACLE PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
10-101960-XXX
MS3181-XXX
(Wall Receptacle)
10-101961-XXX
(Cable Connecting
Receptacle)
10-101964-XXX
MS3181-XXX
(Jam Nut Recptacle)
PLUG PROTECTION CAP
FOR PT, SP, MS/PT CONNECTORS
MS3180-XXX
10-101957-XXX
40
PT & SP
accessories – dummy receptacles, “O” rings,
plastic dust caps
S
S
R
R
.150 DIA. +.004
–.002
4 HOLES
N
M
K
Shell
Size
K
±.010
M
+.030
-.000
N
+.001
-.005
Proprietary
Version MS Version
R
±.005
S
±.010
R1
(TP)
S1
(TP)
8 .062 .462 .473 .734 1.047 .594 .828
10 .062 .462 .590 .812 1.125 .719 .954
12 .062 .462 .750 .938 1.250 .812 1.047
14 .062 .462 .875 1.031 1.344 .906 1.141
16 .062 .462 1.000 1.125 1.438 .969 1.234
18 .062 .462 1.125 1.203 1.516 1.062 1.328
20 .062 .556 1.250 1.297 1.672 1.156 1.453
22 .062 .556 1.375 1.375 1.750 1.250 1.578
24 .062 .589 1.500 1.500 1.875 1.375 1.703
DUMMY RECEPTACLES – FOR PT, SP, MS/PT
How to Order Proprietary Dummy Receptacles: 10-150921-XX X
Adddesiredshellsize
Adddesirednishsux†
“FL”designatesgrayzincnickel
“3” designates olive drab cadmium
“5” designates Alumilite®
HowtoOrderMSVersionDummyReceptacles: MS3115-XXX
Adddesiredshellsize
Adddesirednishsux†
-A designates Alumilite®
-L designates electroless nickel
-W designates olive drab cadmium
PLASTIC DUST CAPS – FOR PT, SP
Shell Size Plug Plastic Dust
Cap
Receptacle Plastic
Dust Cap
6 10-70500-8 10-70506-8S
8 10-70506-12 10-70506-10
10 10-70500-12 10-70506-12
12 10-70506-16 10-70506-14
14 10-70506-18 10-70506-16
16 10-70506-20 10-70506-18
18 10-70506-22 10-70506-20
20 10-70506-24 10-79506-22
22 10-70524-1 10-70506-24
24 10-70506-28 10-70524-1
How to Order Plastic Dust Caps:
Tothebasicordernumberaddthedustcapsizeto
matchconnectorplugorreceptacleshellsize,as
shown in the tables above.
Example: 10-70506-12 would be the correct order
number for a plastic dust cap for a PT00 receptacle,
shellsize10.
All dimensions for reference only.
DUMMY RECEPTACLE
FOR PT, SP, MS/PT CONNECTORS
MS3115-XXX
10-150921-XXX
41
DUMMY RECEPTACLES – FOR PT, SP, MS/PT
PT accessories
glands
Nylon Cable Glands
Material: Nylon66(ULApproved94V-2)
Seal ring: UL94V-2(ULApproved94V-2)
Thread Type: Metric;PG,NPT
Temp Range: Static: -40° to +100°C
Dynamic: -20° to +80°C
Short Term: +120°
Current Colors: Gray, Black
AIGO Part Thread “A” M “d”
(mm)
Cable
Range
(mm)
Thread
“L”
(mm)
Clamp
“H”
(mm)
Spanner
“S”
(mm)
AIO-CSM12 M12 x1.5 8 3-6.5 8 20 15
AIO-CSM16 M16 x 1.5 8 4-8 8 22 19
AIO-CSM18 M18 x 1.5 10 5-10 9 25 22
AIO-CSM18 M20 x 1.5 12 6-12 9 30 24
AIO-CSM20 M22 x 1.5 14 10-14 10 30 27
AIO-CSM22 M24 x 1.5 14 10-14 10 30 27
AIO-CSM24 M25 x 1.5 18 13-18 10 30 33
AIO-CSM25 M30 x 2.0 18 13-18 11 33 33
AIO-CSM30 M32 x 1.5 25 18-25 11 38 42
AIO-CSM32 M33 x 2.0 25 18-25 11 39 42
AIO-CSM33 M40 x 1.5 32 22-32 13 48 54
AIO-CSM40 M50 x 1.5 38 32-38 14 50 60
AIO-CSM50 M72 x 2.0 57 51-57 16 75 80
AIO-CSM72 NPT1/2” 12 6-12 13.6 28 24
AIO-CSIN1/2 NPT 3/4” 18 13-18 14.1 32 33
AIO-CSIN3/4 NPT 1”1/2” 32 22-32 17.3 50 54
AIO-CSIN3/2 G 1/2” 12 6-12 9 26 24
AIO-CSGIN3/4 G 3/4” 18 13-18 11 27 33
AIO-CSGIN1 G1” 25 18-25 11 33 42
AIO-CSGIN5/4 G1”1/4 28 21-28 13 48 54
AIO-CSGIN3/2 G1”1/2” 32 22-32 13 48 54
AIO-CSGIN5/2 G2”1/2” 57 51-57 14 75 80
AIO-CSPG7 PG7 6.5 3-6.5 8 20 15
AIO-CSPG9 PG9 8 4-8 8 22 19
AIO-CSPG11 PG11 10 5-10 8 24 22
AIO-CSPG13.5 PG13.5 12 6-12 9 26 24
AIO-CSPG16 PG16 14 10-14 10 28 27
AIO-CSPG21 PG21 18 13-18 11 33 33
AIO-CSPG29 PG29 25 18-25 11 38 42
AIO-CSPG36 PG36 32 22-32 13 48 54
AIO-CSPG42 PG42 38 32-38 14 52 60
For additional information on other products available refer to our
Cord grips & Cable Glands, Catalog 12-055
Metal Cable Glands
Material: BrasswithNickel;BrasswithTin/Nickel
Clamping: ULapprovedPA6,94V-0
Seal Ring: UL94V-2(ULapprovedNBR,94V-2;ULapproved
DOWCORNINGRUBBER,94V-0
Thread Type: Metric, PG, NPT
Protective: IP68 (tighten with o-ring)
Temp Range: -40° to +100°C
TorqueValue(N-M)ofhexandcapnuts:3.0-4.5N-MM12,M16,M20
areULrecognizedunderle#E339605
AIGO Part Thread
“A”
M “d”
(mm)
Cable
Range
(mm)
Thread
“L”
(mm)
Clamp
“H”
(mm)
Spanner
“S”
(mm)
AIO-CSJM12 M12x1.5 6.5 3-6.5 6.2 15 14
AIO-CSJM14 M14x1.5 8 4-8 5 19 15
AIO-CSJM16 M16x1.5 9 6-9 6.3 20 18
AIO-CSJM18 M18x1.5 10 5-10 7 20 22
AIO-CSJM20 M20x1.5 12 6-12 8.3 20 22
AIO-CSJM22 M22x1.5 14 10-14 8 24 24
AIO-CSJM24 M24x1.5 14 10-14 8 24 27
AIO-CSJM25 M25x1.5 18 13-18 7.8 23 30
AIO-CSJM27 M27x1.5 18 13-18 8 26 30
AIO-CSJM30 M30x2.0 18 13-18 8 26 32
AIO-CSJM32 M32x1.5 25 18-25 10 27 40
AIO-CSJM36 M36x2.0 25 18-25 10 34 40
AIO-CSJM40 M40x1.5 32 22-32 10 39 50
AIO-CSJM50 M50x1.5 38 32-38 11 39 60
AIO-CSJM63 M63x1.5 44 37-44 12 43 67
AIO-CSJM72 M72x1.5 52 46-52 16 47 75
AIO-CSJM80 M80x2.0 60 52-60 20 57 90
AIO-CSJM90 M90x2.0 70 62-70 20 57 100
AIO-CSJIN1/2 NPT 1/2” 12 6-12 13.6 25 24
AIO-CSJIN3/4 NPT 3/4” 18 13-18 14.1 26 30
AIO-CSJIN5/4 NPT 1”1/4” 32 22-32 17.3 41 50
AIO-CSJIN3/2 NPT 1”1/2” 32 22-32 17.3 46 50
AIO-CSJIN2 NPT2” 44 37-44 17.7 46 65
AIO-CSJIN5/2 NPT2 1/2” 52 46-52 23.7 58 80
AIO-CSJIN3 NPT3” 70 62-70 26 58 100
AIO-CSJGIN1/2 G1/2” 12 6-12 8 24 24
AIO-CSJGIN3/4 G3/4” 18 13-18 8 27 30
AIO-CSJGIN1 G1” 25 18-25 10 34 40
AIO-CSJGIN5/4 G1”1/4” 32 22-32 10 39 50
AIO-CSJGIN3/2 G1”1/2” 32 22-32 10 39 50
AIO-CSJGIN2 G2” 44 37-44 12 44 65
AIO-CSJGIN 5/2 G2 1/2” 52 46-52 16 47 82
AIO-CSJPG7 PG7 6.5 3-6.5 6 18 14
AIO-CSJPG9 PG9 8 4-8 7 21 18
AIO-CSJPG11 PG11 10 5-10 7 20 22
AIO-CSJPG13.5 PG13.5 12 6-12 8 24 22
AIO-CSJPG16 PG16 14 10-14 8 25 24
AIO-CSJPG21 PG21 18 13-18 8 26 30
AIO-CSJPG36 PG36 32 22-32 10 38 50
AIO-CSJPG42 PG42 38 32-38 11 42 60
AIO-CSJPG48 PG48 44 37-44 12 44 65
42
Application Tools
“SE”
Thefollowingdataincludesinformationpertainingtotheapplicationtoolsforcrimping,insertingandremovingsize
20, 16, and 12 contacts incorporated in Amphenol® Miniature Cylindrical Connectors.
Allcrimpingtoolsincludedarethe“fullcycling”type,andwhenusedasspeciedbythemanufacturer,provide
reliable crimped wire to contact termination.
Toolframesandturretheadsareavailablefromapprovedtoolmanufacturers;consultAmphenol,Sidney,NYforlistings.
Assembly instructions are available online at www.amphenol-industrial.com
See the following:
L-786 for SE assembly instructions
L-555 for solder type instructions
CRIMPING TOOLS
FOR PT-SE, SP-SE, MS/PT-SE
(MIL-DTL-26482, Series 1) Connectors
Contact Size
MS Tool Part Number
Tool From Turret Head
20 M22520/1-01 M22520/1-02
16 M22520/1-01 M22520/1-02
12 M22520/1-01 M22520/1-02
INSERTION/REMOVAL TOOLS
FOR PT-SE, SP-SE, MS/PT-SE
(MIL-DTL-26482, Series 1) Connectors
Contact Size
Insertion Tool Removal Tool
Amphenol®
Contact
Insertion Pliers
Amphenol®
Contact Insertion
Tool
MS
Part Number Con-
tact Insertion Tool
Amphenol®
Contact
Removal Tool
MS
Part Number
Contact Removal
Tool
20 11-8107-20 11-7401-20 M81969/17-03 11-7880-20 M81969/19-07
16 11-8107-16 11-7401-16 M81969/17-04 11-7880-16 M81969/19-08
12 - - M81969/17-05 - M81969/19-09
43
Contacts - Power and Thermocouple Crimp
for miniature cylindrical connectors
The following tables provide part number information for crimp contacts used in Amphenol® Miniature Cylindrical
Connectors. For additional information, consult Amphenol, Sidney, NY.
CRIMP CONTACTS for MIL-DTL-26482, Series 1
(PT-SE, SP-SE) Connectors
Contact Size Accommodates
Wire Size
Pins Sockets
MS Number
Amphenol®
Proprietary
Number
MS Number
Amphenol®
Proprietary
Number
20 20, 22 & 24
AWG M39029/31-240 10-683787-20P M39029/32-259 10-731210-3D1
16 16, 18 & 20
AWG M39029/31-228 10-683788-16P M39029/32-247 10-679379-16D
12 12 & 14 AWG M39029/31-235 10-807100-125 M39029/32-254 10-807103-125
20-16 16 AWG 10-330930-20F 10-807155-205
16-20 20 AWG 10-330932-16F 10-330933-16F
12-10 12 AWG 10-330938-12F 10-330939-12F
THERMOCOUPLE CONTACTS for Miniature Connectors
Size Material
Pins
Proprietary Part Number
Sockets
Proprietary Part Number
SE SE
16 Crimp Termination
Chromel 10-330940-21P 10-330940-21S
Alumel 10-330940-22P 10-330940-22S
20 Crimp Termination
Chromel 10-330940-1P 10-330940-1S
Alumel 10-330940-2P 10-330940-2S
Iron 10-330940-3P 10-330940-3S
Constantan 10-330940-4P 10-330940-4S
See L-776 for thermocouple contact termination instructions. These are online at www.amphenol-industrial.com
For PCB contacts for miniature connectors, see page 20.
44
Coaxial Contacts
for miniature cylindrical connectors
Amphenol® Miniature Connectors can incorporate shielded coax
contacts. The Miniature family is built around MIL-DTL-26482
specications,withMil-approvedandproprietarystylesoered.
Normal operating voltage for Miniature cylindricals with power only
contactsisupto1,000VAC(RMS)atsealevel.
Table 1: Miniature Cylindricals oer these features for contact
termination
exibility:
• Several insert arrangements that can incorporate:
• Size8&12CrimpCoaxcontactsforCrimptype
• Size8&12SolderCoaxcontactsforSoldertype
• Wideselectionofconnectorshellstylesandsizes
• Standard power contact options within the various connector
styles include: solder type, crimp front release, crimp rear release
• Coax contacts are designed to the same high performance
standards as power contacts. Coax and power contacts may be
intermixed with no degradation of connector reliability.
• No mis-mating or cross-plugging with insert rotation and keyway
polarization.
Table 2: GENERAL ORDERING INFORMATION
Amphenol Miniature Cylindricals are normally supplied with a full
complement of power contacts, separately packaged. Coax contacts
are ordered by part number as referenced in the part number charts
on the following pages of this catalog, and are substituted for the
power contacts at the time of the cable or equipment assembly. If
the application is for coax only, the connector may be ordered less
contacts and no power contacts will be supplied.
Installation instructions for the coax contacts for Miniature
Connectors are provided in Amphenol documents as follows: L-633 for
soldertype;L-613forSEtype.
HOW TO ORDER:
A. Select the coax contacts designed for the cable being used
from the applicable charts in this catalog for each Miniature
type (solder, SE).
B. Select a connector insert from those shown on pages 4-5
whichwillaccommodatethequantityandsizeofcoaxial
contacts needed plus any power contacts required. Note:
Size8Sand12Scontactsareusedwithconnectorinserts
throughshellsize18only.Forlargerconnectorshellsizes,
usesize8Lcontacts.
C. DeterminetheMiniatureCylindricaltype,shellstyle,nish,
service class and insert rotation required for your application.
D. Consult Amphenol, Sidney NY with the pertinent cable,
contact, insert arrangement and connector style choices for
complete connector part number.
Solder Coax Contact
for use in Miniature Solder Type Connectors
Pin Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
Socket Crimp Coax Contact
for use in Miniature Crimp SE Type Connectors
45
Coaxial Contacts
for miniature cylindrical connectors, cont.
Amphenol® Coaxial Contacts designed for use
inMiniatureCylindricalConnectorsoerthesame
durabilityadvantagesanddesignbenetsforreliable
interconnection as the Amphenol coax contacts used
in high performance D38999 connectors. A variety
of military and commercial shielded cables are
accommodated within the miniature cylindrical series.
Amphenol supplies coax contacts for solder and crimp
SE connector styles.
Other features of the coax for miniature cylindricals include:
• Miniature coax design has an outside nut within the
assembly for fast, reliable assembly of contact to
cable.
• All types feature solder style inner contacts and
crimp style outer contacts for reliable cable
termination
• Miniature coax crimp type contacts are designed for
use in Miniature crimp series connectors
• Miniature coax solder type contacts are designed
for use in Miniature solder series connectors. These
come pre-installed into the solder connector.
TYPICAL ELECTRICAL PERFORMANCE
Size 8 and 12 Coax Contacts
Contact Resistance:
Center @ 1 Amp, 170 millivolts max. voltage drop @ 25°C
Outer @ 12 Amps, 150 millivolts max. voltage drop @ 25°C
Dielectric Withstanding Voltage:
Size8:1,300VACRms@sealevel
Size12:1,000VACRms@sealevel
Size8&12:250VACRms@50,000ft.
Insulation Resistance
5,000 megohms minimum @ 25°C
TypicalVSWRforsize8&12PT-SETypesII&IIIonly:
1.2+.12F(GHz)upto10GHz
EXPLANATION OF TYPE CLASSIFICATIONS:
PT-SE Type I is moisture seal design with internal O-ring.
PT-SE Type II is 50 ohm impedance matched version. Contacts
terminated to other than 50 ohm cables are therefore not matched.
PT-SE Type III is 50 ohm contact, non-serviceable after assembly.
Solders are non-impedance matched contacts.
CONTACT FINISHES:
SuxFinish
1 0.00020min.silverovercopperash
2 0.00005 min. gold (Knoop hardness 130-200) over silver
3 0.00010 min. gold (Knoop hardness 130-200) over silver
4 0.00010 min. gold (Knoop hardness 130-200) over copper
5 0.00005 min. gold (Knoop hardness 130-200) over nickel
E 0.00005 min. gold (Knoop hardness 90 max.) over copper
F 0.00005 min. gold (Knoop hardness 130-200) over copper
H 0.00010 min. gold (Knoop hardness 130-200) over copper
TYPICAL MINIATURE CRIMP COAX
SOCKET CONTACT has crimp socket outer
contact with a solder pin inner contact
TYPICAL MINIATURE CRIMP COAX PIN
CONTACT has crimp pin outer contact
with a solder socket inner contact
46
Coaxial Contacts
for miniature cylindrical connectors, cont.
solder (MIL-DTL-26482 Series 1 type) - application data
H
G
L
F
H
G
L
F
PIN
SOCKET
MATING
PIN DIA
MATING
PIN DIA
SOLDER COAX CONTACTS
For use in Miniature Solder Type Connectors: PT, SP, and MS/PT Styles
Cable
Contact Part Number
Contact
Size
Dimensional Data
(See Drawings above) Crimp Ferrule Tools
Retainer
Nut
Wrench
Pin Socket G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
L
Length Ref.
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-01
Tool
Use with Die Part
Number
Pin Socket
RG-58C/U,
RG-141A/U,
RG-303/U
21-33020-2 21-33019-2 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
21-33020-1 21-33019-1 8L 0.040
± 0.001 0.219 0.280 1.176 1.177
M22910/7-18 (B) M22520/5-45 (B) 11-8676-3
21-33020-3 21-33019-3 8S 0.040
± 0.001 0.219 0.280 1.114 1.115
RG-142B/U,
Times
MI51115
21-33020-7* 21-33019-7* 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-16 (B) M22520/5-43 (B) 11-8678-2
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
21-33020-32* 21-33019-32* 12S 0.0300
± 0.0005 0.140 0.172 1.092 1.093 M22910/7-12 (B)
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
M22520/10-05 (A) 11-8676-1
RG-178B/U 21-33020-4 21-33019-4* 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-11 (B) M22520/5-03 (B)
M22520/5-33 (B) M22520/10-05 (B) 11-8676-2
RG-196A/U 21-33020-31† 21-33061-31*† 12S 0.0300
± 0.0005 0.140 0.172 1.092 1.093 M22910/7-11 (B) M22520/5-03 (B)
M22520/5-33 (B) M22520/10-05 (B) 11-8676-1
RG-180B/U,
RG-195A/U,
Raychem
5022D1312-9
21-33020-5* 21-33019-5* 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2
Raychem
5021D1331-9 21-33020-6* 21-33019-6* 8S 0.040
± 0.001 0.219 0.280 1.114 1.115 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2
Thermatics
2929-29 21-33020-33 21-33061-33 12S 0.0200
± 0.0005 0.140 0.172 1.092 1.093 M22910/7-13 (B) M22520/5-37 (B) 11-8676-1
NOTE: Contacts can be ordered by part numbers given in chart
NOTE:Size8Sand12Scontactsareusedwithconnector
insertsthroughshellsize18only.Forlargerconnectorshell
sizes,usesize8Lcontacts.
CONTACT FINISH: For all contacts in this series feature
0.000050 minimum gold (Knoop hardness 130-200).
* Consult Amphenol, Sidney NY for availability
CRIMPINGTOOLS:Italicizedlettersinparenthesisthatfollowpositioner
part numbers indicate applicable die closure. Commercial
equivalents with the same die closure dimension may be used.
† 21-33020-31 and 21-33061-31 only mate with each other
47
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-DTL-26482 Series 1 type) - application data
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles
Cable
Contact Part Number
Contact
Size Type
Finish
on
Mating
Parts
Dimensional Data (See Drawings above)
Crimp Ferrule Tools
Retainer Nut
Wrench
Installation Tools
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
L Length Ref.
Insertion Removal
Pin Socket Pin Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-0
Tool
Use with Die Part
Number
RG-55B/U,
RG-142A/U,
RG-142B/U,
RG-223/U
21-33012-21
21-33012-25
21-33011-21
21-33011-25
8
8
I
II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-17 (B) M22520/5-05 (A)
M22520/5-19 (B) M22520/10-07 (A) 11-8676-2 11-8369-5
11-8660-5
11-7880-8
11-8154-1
21-33038-21
21-33038-25*
21-33037-21
21-33037-25
8
8
I
II 4
21-33138-21( )*
21-33138-25( )*
21-33137-21( )*
21-33137-25( )*
8
8
I
II **
RG-58C/U,
RG-141A/U,
RG-303/U
21-33012-22
21-33012-26
21-33011-22
21-33011-26
8
8
I
II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4
11-8660-4
11-7880-8
11-8154-1
21-33038-22*
21-33038-26*
21-33037-22
21-33037-26*
8
8
I
II 4
21-33138-22( )*
21-33138-26( )*
21-33137-22( )
21-33137-26( )*
8
8
I
II **
RG-59B/U,
RG-62A/U,
RG-62B/U,
RG-210/U
21-33012-36 21-33011-36 8 II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-18 (B) M22520/5-45 (B) 11-8676-3 11-8369-5
11-8660-5
11-7880-8
11-8154-1
21-33038-36* 21-33037-36 8 II 4
21-33138-36( )* 21-33137-36( ) 8 II **
RG-140/U,
RG-302/U
21-33012-37* 21-33011-37* 8 II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144 M22910/7-17 (B) M22520/5-05 (A)
M22520/5-19 (B) M22520/10-07 (A) 11-8676-2 11-8369-5
11-8660-5
11-7880-8
11-8154-1
21-33038-37* 21-33037-37* 8 II 4
21-33138-37( )* 21-33137-37( )* 8 II **
RG-161/U,
RG-174A/U,
RG-179B/U,
RG-187A/U,
RG-188A/U,
RG-316/U
21-33012-34
21-33012-30
21-33011-34
21-33011-30
8
8
I
II 2
0.0355
±0.0010 0.218 0.280 1.156 1.144
M22910/7-12 (B)
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
M22520/10-05 (A)
11-8676-2
11-8369-2
11-8660-2
11-7880-8
11-8154-1
21-33038-34
21-33038-30
21-33037-34
21-33037-30
8
8
I
II 4
21-33138-34( )*
21-33138-30( )*
21-33137-34( )*
21-33137-30( )*
8
8
I
II **
21-33012-1
21-33012-4
21-33011-1
21-33011-4
12
12
I
II 2
0.0200
±0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12
11-8154-2
21-33038-1*
21-33038-4
21-33037-1*
21-33037-4*
12
12
I
II 4
21-33138-1( )*
21-33138-4( )*
21-33137-1( )
21-33137-4( )*
12
12
I
II **
RG-178B/U,
RG-196A/U
21-33012-35 21-33011-35 8 I 2
0.0355
±0.0010 0.218 0.280 1.156 1.144
M22910/7-11 (B) M22520/5-03 (B)
M22520/5-33 (B)
11-8676-2
11-8369-1
11-8660-1
11-7880-8
11-7880-8
21-33038-35 21-33037-35 8 I 4
21-33138-35( )* 21-33137-35( )* 8 I **
21-33012-3*
21-33012-5
21-33011-3*
21-33011-5
12
12
I
II 2
0.0200
± 0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12
11-8154-2
21-33038-3*
21-33038-5
21-33037-3*
21-33037-5*
12
12
I
II 4
21-33138-3( )*
21-33138-5( )*
21-33137-3( )*
21-33137-5( )*
12
12
I
II **
NOTE: Contacts can be ordered by part numbers given in chart
**SeenishoptionsforSEcrimpMiniaturecontactslistedon
page 44. Replace the parenthesis of the contact part number with
thenishsuxnumber.However,youshouldconsultAmphenol,
Sidney,NYregardingtheavailabilityofallnishchoicesforeach
part number.
* Consult Amphenol, Sidney NY for availability
CRIMPINGTOOLS:Italicizedlettersinparenthesisthatfollow
positioner part numbers indicate applicable die closure.
Commercial equivalents with the same die closure dimension may
be used.
CHART CONTINUES ON NEXT PAGE
MATING
PIN DIA
H
G
PIN F
L
MA
TING
PIN DIA
H
G
SOCKET
F
L
NOTE:Allcontactsofthesamesizeandthesameinnerand
outer contact diameters (G & H) will mate with each other.
48
Coaxial Contacts
for miniature cylindrical connectors, cont.
crimp SE (MIL-MDL-26482 Series 1 type) - application data, cont.
SE CRIMP COAX CONTACTS
For use in Miniature Crimp Type Connectors: PT-SE, SP-SE, and MS/PT-SE Styles
Cable
Contact Part Number
Contact
Size Type
Finish
on
Mating
parts
Dimensional Data
Crimp Ferrule Tools
Retainer
Nut
Wrench
Installation Tools
G
Dia.
H
Dia.
±0.001
F
Across
Flats
±0.004
L Length Ref.
Insertion Removal
Pin Socket Pin Socket
MIL-T-22910/7-1
Tool
Use with Die Part
Number
47MIL-C-22520/5-01
Tool
Use with Die Part
Number
MIL-C-22520/10-0
Tool
Use with Die Part
Number
RG-180B/U,
RG-195A/U
21-33012-24
21-33012-46*
21-33011-24
21-33011-46*
8
8
I
II 2
0.0355
± 0.0010 0.218 0.280 1.156 1.114 M22520/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4
11-8660-4
11-7880-8
11-8154-1
21-33038-24
21-33038-46*
21-33037-24
21-33037-46*
8
8
I
II 4
21-33138-24( )*
21-33138-46( )*
21-33137-24( )*
21-33137-46( )*
8
8
I
II **
Raychem
9527E1118,
RG-180B/U,
RG-195A/U
21-33106-40( ) 21-33105-40( ) 12 III ** 0.0200
± 0.0005 0.128 0.899 0.879 Daniels GS200 Tool with G2P330 or
M22520/31-01 Tool with Positioner M22520/31-02 11-8674-2 11-7880-12
11-8154-2
RG-188 or
RG-316
Double Braid
21-33012-6*
21-33012-7*
21-33011-6*
21-33011-7*
12
12
I
II 2
0.0200
± 0.0005 0.128 0.172 1.092 1.072
M22910/7-13 (B) M22520/5-37 (B)
11-8676-1 11-8369-2
11-8660-2
11-7880-12
11-8154-2
21-33038-6*
21-33038-7*
21-33037-6*
21-33037-7*
12
12
I
II 4
21-33138-6( )*
21-33138-7( )*
21-33137-6( )*
21-33137-7( )*
12
12
I
II **
Thermax
50C-25ADS-1
21-33012-44 21-33011-44 8 II 2
0.0355
± 0.0010 0.128 0.280 1.156 1.144 11-8676-2 11-8369-4
11-8660-4
11-7880-8
11-8154-1
21-33038-44* 21-33037-44* 8 II 4
21-33138-44( )* 21-33137-44( )* 8 II **
RG-195
Double Braid
21-33012-28 21-33011-28 8 I 2
0.0355
± 0.0010 0.128 0.280 1.156 1.144 M22910/7-16 (B) M22520/5-43 (B) 11-8676-2 11-8369-4
11-8660-4
11-7880-8
11-8154-1
21-33038-28* 21-33037-28* 8 I 4
21-33138-28( )* 21-33137-28( )* 8 I **
RG-122/U,
Raychem
5022E5111
21-33012-23
21-33012-27
21-33011-23
21-33011-27
8
8
I
II 2
0.0355
± 0.0010 0.218 0.280 1.156 1.144 M22520/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4
11-8660-4
11-7880-8
11-8154-1
21-33038-23*
21-33038-27
21-33037-23*
21-33037-27
8
8
I
II 4
21-33138-23( )*
21-33138-27( )*
21-33137-23( )*
21-33137-27( )*
8
8
I
II **
Raychem
9530D5314
21-33012-31 21-33011-31 8 I 2
21-33038-31 21-33037-31 8 I 4
21-33138-31( )* 21-33137-31( )* 8 I **
Raychem
9527A1317
21-33012-39 21-33011-39 8 II 2
0.0355
± 0.0010 0.218 0.280 1.156 1.144 M22910/7-15 (B) M22520/5-05 (B)
M22520/5-41 (B) M22520/10-07 (B) 11-8676-2 11-8369-4
11-8660-4
11-7880-8
11-8154-1
21-33038-39* 21-33037-39* 8 II 4
21-33138-39( )* 21-33137-39( )* 8 II **
Raychem
7527A1318
21-33012-40* 21-33011-40 8 II 2
0.0355
± 0.0010 0.218 0.280 1.156 1.144 M22910/7-12 (B)
M22520/5-03 (A)
M22520/5-08 (A)
M22520/5-35 (B)
M22520/10-05 (A) 11-8676-2 11-8369-2
11-8660-2
11-7880-8
11-8154-1
21-33038-40* 21-33037-40* 8 II 4
21-33138-40* 21-33137-40( )* 8 II **
Westrex
199-49-1,
Tensolite
30850/87T-1
21-33012-43 21-33011-43 12 II 2
0.0200
± 0.0005 0.128 0.172 1.092 1.072 M22910/7-11 (B) M22520/5-03 (B)
M22520/5-33 (B) M22520/10-05 (B) 11-8676-1 11-8369-1
11-8660-1
11-7880-12
11-8154-2
21-33038-43 21-33037-43 12 II 4
21-33138-43( )* 21-33137-43( )* 12 II **
NOTE: Contacts can be ordered by part numbers given in chart
**SeenishoptionsforSEcrimpMiniaturecontactslistedonpage44.
Replacetheparenthesisofthecontactpartnumberwiththenishsux
number. However, you should consult Amphenol, Sidney, NY regarding the
availabilityofallnishchoicesforeachpartnumber.
* Consult Amphenol, Sidney NY for availability
CRIMPINGTOOLS:Italicizedlettersinparenthesisthatfollow
positioner part numbers indicate applicable die closure.
Commercial equivalents with the same die closure dimension
may be used.
49
Mounting Recommendations
for miniature cylindrical connectors
R
(TP)
R
2
D Dia.
R
2
.120 Dia. for Shell Sizes 6-22
PC & PT
.147 Dia. for
Size 24 PT
.150 Dia. for
SP only
4 HOLES
CUT-OUT SECTION
No. 4 Screw
for PC & PT
No. 6 Screw
for SP and for
Size 24 PT
FLANGE MOUNTED CONNECTORS
F
F
RB
CUT-OUT FOR
PT ONLY
PIN LOCATION FOR PC ONLY SECTION
JAM NUT MOUNTINGS
N
CUT-OUT SOLDER
RECEPTACLE
JAM NUT
RECEPTACLE
(See dimensions
above)
BOX
RECEPTACLE
(See dimensions
above)
HERMETIC RECEPTACLES
FLANGE MOUNTED CONNECTORS
AllangemountingPTconnectorsusestandardMSmountingdimensions.
They cannot be back panel mounted due to coupling clearance. The PTB
(thru-bulkhead) type connector must also be back panel mounted on one side.
Flange gaskets are available for both series, see page 37.
Shell Size R (TP) D Dia.
PT, PTB SP PT SP, PTB
6 .469 .641 .323 .439
8 .594 .734 .449 .563
10 .719 .812 .573 .680
12 .812 .938 .699 .859
14 .906 1.031 .823 .984
16 .969 1.125 .949 1.108
18 1.062 1.203 1.073 1.233
20 1.156 1.297 1.199 1.358
22 1.250 1.375 1.323 1.483
24 1.375 1.449 1.449 -
JAM NUT MOUNTINGS
The jam nut design has become very popular because it allows bench wiring of
harnessassemblies.Thelaborsavingoftenosetstheaddedcostofthejam
nut receptacle which is due to the self contained “O” ring and the extra nut.
Shell Size
R
+.010
-.000
B
+.000
-.010
F
±.010
P Panel Thickness
Min. Max.
6 .447 .420 .286 .062 .125
8 .572 .542 .331 .062 .125
10 .697 .669 .375 .062 .125
12 .884 .830 .442 .062 .125
14 1.007 .955 .486 .062 .125
16 1.134 1.084 .530 .062 .125
18 1.259 1.208 .573 .062 .125
20 1.384 1.333 .641 .062 .250
22 1.507 1.459 .685 .062 .250
24 1.634 1.575 - .062 .250
HERMETIC RECEPTACLE MOUNTINGS
This series must be mounted in such a way as to preserve the
hermetic seal provided by the glass insert. Mounting data for
box and jam nut receptacles is given above. Cut-out required for
solder mounting receptacles (N) is given below.
Thenishofeachofthesehermeticreceptaclesisfusedelectro-
deposited tin for easy solderability, and protected by a special
lacquer for optimum shelf life. The lacquer will not interfere with
any soldering operation.
Low temperature solder should be used and the addition of a
solderlletatarrowpointsondrawingatrightisrecommended.
Caremustbetakenthattheoperatingtemperatureofthenal
assembly does not rise above the melting point of tin (440° F).
Shell
Size
N
Max.
6 .458
8 .582
10 .692
12 .801
14 .926
16 1.051
18 1.176
20 1.395
22 1.375
24 1.520
F
F
RB
CUT-OUT FOR
PT ONLY
PIN LOCATION FOR PC ONLY SECTION
JAM NUT MOUNTINGS
50
Other Amphenol Miniature Cylindrical
Connectors
Geophysical Miniature Cylindricals
Designed for the Geophysical industry’s rugged
environments, the Amphenol® RPT Series connector
has custom features that provide reliability in extreme
temperature and moisture conditions.
The unique shell design provides stronger shells along
withananodized(non-conductive)nishforgreater
salt, corrosion and abrasion resistance. Coupling nuts
are manufactured with round detent holes and are sold
separatelyforgreatercustomerexibility.
Seeproductdatasheet#146.
RJ Field Bayonet Cylindricals
Amphenol PCD division provides MIL-DTL-26482 bayonet
coupling cylindrical connectors with an RJ45 Ethernet
interface*. These are designed for use in all levels of harsh
environments from industrial to mil-aero applications
providingIP67protectionfromdust,uids,vibration,shock
and traction. The Amphenol® RJ Field allows the use of
Ethernet Class D/Cat 5 and Cat 5e connections for 10 BaseT,
100 Base TX, or 1000 BaseT networks. It works with any
standardRJ45cordsetwithnoextratooling.Italsooers
reinforced EMI protection.
Formoreinformationgoonlinetowww.rjeld.comoraskfor
the Field Series brochure.
* RJ Field Bayonet and other Field Series products are available through
AmphenolPCD.TheseincludeRJFTVwithinMIL-DTL-38999SeriesIII
threaded coupling connectors, and RJF 544 within ECTA push-pull plastic
shell coupling.