LM336BZ-2.5 NOPB - NATIONAL SEMICONDUCTOR

LM136-2.5,LM236-2.5,LM336-2.5

LM136-2.5/LM236-2.5/LM336-2.5V Reference Diode

Literature Number: SNVS749D

LM136-2.5/LM236-2.5/LM336-2.5V

Reference Diode

General Description

The LM136-2.5/LM236-2.5 and LM336-2.5 integrated cir-

cuits are precision 2.5V shunt regulator diodes. These

monolithic IC voltage references operate as a low-

temperature-coefficient 2.5V zener with 0.2Ωdynamic im-

pedance. A third terminal on the LM136-2.5 allows the refer-

ence voltage and temperature coefficient to be trimmed

easily.

The LM136-2.5 series is useful as a precision 2.5V low

voltage reference for digital voltmeters, power supplies or op

amp circuitry. The 2.5V make it convenient to obtain a stable

reference from 5V logic supplies. Further, since the LM136-

2.5 operates as a shunt regulator, it can be used as either a

positive or negative voltage reference.

The LM136-2.5 is rated for operation over −55˚C to +125˚C

while the LM236-2.5 is rated over a −25˚C to +85˚C tem-

perature range.

The LM336-2.5 is rated for operation over a 0˚C to +70˚C

temperature range. See the connection diagrams for avail-

able packages.

Features

nLow temperature coefficient

nWide operating current of 400 µA to 10 mA

n0.2Ωdynamic impedance

n±1% initial tolerance available

nGuaranteed temperature stability

nEasily trimmed for minimum temperature drift

nFast turn-on

Connection Diagrams

TO-92

Plastic Package

00571508

Bottom View

Order Number LM336Z-2.5 or LM336BZ-2.5

See NS Package Number Z03A

TO-46

Metal Can Package

00571520

Bottom View

Order Number LM136H-2.5,

LM136H-2.5/883, LM236H-2.5,

or LM236AH-2.5

See NS Package Number H03H

SO Package

00571512

Top View

Order Number LM236M-2.5,

LM236AM-2.5, LM336M-2.5

or LM336BM-2.5

See NS Package Number M08A

June 2005

LM136-2.5/LM236-2.5/LM336-2.5V Reference Diode

Typical Applications

2.5V Reference

00571509

2.5V Reference with Minimum

Temperature Coefficient

00571510

†Adjust to 2.490V

*Any silicon signal diode

Wide Input Range Reference

00571511

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com 2

Absolute Maximum Ratings (Note 1)

If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales Office/

Distributors for availability and specifications.

Reverse Current 15 mA

Forward Current 10 mA

Storage Temperature −60˚C to +150˚C

Operating Temperature Range (Note 2)

LM136 −55˚C to +150˚C

LM236 −25˚C to +85˚C

LM336 0˚C to +70˚C

Soldering Information

TO-92 Package (10 sec.) 260˚C

TO-46 Package (10 sec.) 300˚C

SO Package

Vapor Phase (60 sec.) 215˚C

Infrared (15 sec.) 220˚C

See AN-450 “Surface Mounting Methods and Their Effect

on Product Reliability” (Appendix D) for other methods of

soldering surface mount devices.

Electrical Characteristics (Note 3)

LM136A-2.5/LM236A-2.5 LM336B-2.5

Parameter Conditions LM136-2.5/LM236-2.5 LM336-2.5 Units

Min Typ Max Min Typ Max

Reverse Breakdown

Voltage

=25˚C, I

=1 mA

LM136, LM236, LM336 2.440 2.490 2.540 2.390 2.490 2.590 V

LM136A, LM236A, LM336B 2.465 2.490 2.515 2.440 2.490 2.540 V

Reverse Breakdown

Change

=25˚C, 2.6 6 2.6 10 mV

With Current 400 µA≤I

≤10 mA

Reverse Dynamic

Impedance

=25˚C, I

=1 mA, f = 100 Hz 0.2 0.6 0.2 1 Ω

Temperature Stability V

Adjusted to 2.490V

(Note 4) I

=1 mA, Figure 2

0˚C≤T

≤70˚C (LM336) 1.8 6 mV

−25˚C≤T

≤+85˚C 3.5 9 mV

(LM236H, LM236Z)

−25˚C ≤T

≤+85˚C (LM236M) 7.5 18 mV

−55˚C≤T

≤+125˚C (LM136) 12 18 mV

Reverse Breakdown

Change

400 µA≤I

≤10 mA 3 10 3 12 mV

With Current

Reverse Dynamic

Impedance

=1 mA 0.4 1 0.4 1.4 Ω

Long Term Stability T

=25˚C ±0.1˚C, I

=1 mA, 20 20 ppm

t = 1000 hrs

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating the device

beyond its specified operating conditions.

Note 2: For elevated temperature operation, Tjmax is:

LM136 150˚C

LM236 125˚C

LM336 100˚C

Thermal Resistance TO-92 TO-46 SO-8

(Junction to Ambient) 180˚C/W (0.4" leads) 440˚C/W 165˚C/W

170˚C/W (0.125" lead)

(Junction to Case) n/a 80˚C/W n/a

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com3

Electrical Characteristics (Note 3) (Continued)

Note 3: Unless otherwise specified, the LM136-2.5 is specified from −55˚C ≤TA≤+125˚C, the LM236-2.5 from −25˚C ≤TA≤+85˚C and the LM336-2.5 from 0˚C

≤TA≤+70˚C.

Note 4: Temperature stability for the LM336 and LM236 family is guaranteed by design. Design limits are guaranteed (but not 100% production tested) over the

indicated temperature and supply voltage ranges. These limits are not used to calculate outgoing quality levels. Stability is defined as the maximum change in Vref

from 25˚C to TA(min) or TA(max).

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com 4

Typical Performance Characteristics

Reverse Voltage Change Zener Noise Voltage

00571521 00571522

Dynamic Impedance Response Time

00571523 00571524

Reverse Characteristics Forward Characteristics

00571525 00571526

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com5

Typical Performance

Characteristics (Continued)

Temperature Drift

00571527

Application Hints

The LM136 series voltage references are much easier to use

than ordinary zener diodes. Their low impedance and wide

operating current range simplify biasing in almost any circuit.

Further, either the breakdown voltage or the temperature

coefficient can be adjusted to optimize circuit performance.

Figure 1 shows an LM136 with a 10k potentiometer for

adjusting the reverse breakdown voltage. With the addition

of R1 the breakdown voltage can be adjusted without affect-

ing the temperature coefficient of the device. The adjustment

range is usually sufficient to adjust for both the initial device

tolerance and inaccuracies in buffer circuitry.

If minimum temperature coefficient is desired, two diodes

can be added in series with the adjustment potentiometer as

shown in Figure 2. When the device is adjusted to 2.490V

the temperature coefficient is minimized. Almost any silicon

signal diode can be used for this purpose such as a 1N914,

1N4148 or a 1N457. For proper temperature compensation

the diodes should be in the same thermal environment as

the LM136. It is usually sufficient to mount the diodes near

the LM136 on the printed circuit board. The absolute resis-

tance of R1 is not critical and any value from 2k to 20k will

work.

00571528

FIGURE 1. LM136 With Pot for Adjustment

of Breakdown Voltage

(Trim Range = ±120 mV typical)

00571529

FIGURE 2. Temperature Coefficient Adjustment

(Trim Range = ±70 mV typical)

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com 6

Application Hints (Continued)

Low Cost 2 Amp Switching Regulator†

00571505

*L1 60 turns #16 wire on Arnold Core A-254168-2

†Efficiency ≈80%

Precision Power Regulator with Low Temperature Coefficient

00571513

5V Crowbar

00571514

Trimmed 2.5V Reference with

Temperature Coefficient Independent

of Breakdown Voltage

00571515

*Does not affect temperature coefficient

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com7

Application Hints (Continued)

Adjustable Shunt Regulator

00571506

Linear Ohmmeter

00571516

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com 8

Application Hints (Continued)

Op Amp with Output Clamped

00571517

Bipolar Output Reference

00571518

2.5V Square Wave Calibrator

00571519

5V Buffered Reference

00571530

Low Noise Buffered Reference

00571531

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com9

Schematic Diagram

00571501

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com 10

Physical Dimensions inches (millimeters)

unless otherwise noted

Order Number LM136H-2.5, LM136H-2.5/883, LM236H-2.5, LM136AH-2.5, LM136AH-2.5/883 or LM236AH-2.5

NS Package Number H03H

Small Outline (SO) Package (M)

Order Number LM236M-2.5, LM236AM-2.5, LM336M-2.5 or LM336BM-2.5

NS Package Number M08A

LM136-2.5/LM236-2.5/LM336-2.5V

www.national.com11

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

TO-92 Plastic Package (Z)

Order Number LM336Z-2.5 or LM336BZ-2.5

NS Package Number Z03A

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves

the right at any time without notice to change said circuitry and specifications.

For the most current product information visit us at www.national.com.

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS

WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR

CORPORATION. As used herein:

1. Life support devices or systems are devices or systems

which, (a) are intended for surgical implant into the body, or

(b) support or sustain life, and whose failure to perform when

properly used in accordance with instructions for use

provided in the labeling, can be reasonably expected to result

in a significant injury to the user.

2. A critical component is any component of a life support

device or system whose failure to perform can be reasonably

expected to cause the failure of the life support device or

system, or to affect its safety or effectiveness.

BANNED SUBSTANCE COMPLIANCE

National Semiconductor manufactures products and uses packing materials that meet the provisions of the Customer Products

Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain

no ‘‘Banned Substances’’ as defined in CSP-9-111S2.

Leadfree products are RoHS compliant.

National Semiconductor

Americas Customer

Support Center

Email: new.feedback@nsc.com

Tel: 1-800-272-9959

National Semiconductor

Europe Customer Support Center

Fax: +49 (0) 180-530 85 86

Email: europe.support@nsc.com

Deutsch Tel: +49 (0) 69 9508 6208

English Tel: +44 (0) 870 24 0 2171

Français Tel: +33 (0) 1 41 91 8790

National Semiconductor

Asia Pacific Customer

Support Center

Email: ap.support@nsc.com

National Semiconductor

Japan Customer Support Center

Fax: 81-3-5639-7507

Email: jpn.feedback@nsc.com

Tel: 81-3-5639-7560

www.national.com

LM136-2.5/LM236-2.5/LM336-2.5V Reference Diode

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,

and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should

obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are

sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard

warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where

mandated by government requirements, testing of all parameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and

applications using TI components. To minimize the risks associated with customer products and applications, customers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,

or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information

published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a

warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual

property of the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied

by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive

business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional

restrictions.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all

express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not

responsible or liable for any such statements.

TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably

be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing

such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products

and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be

provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in

such safety-critical applications.

TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are

specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military

specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at

the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.

TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are

designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated

products in automotive applications, TI will not be responsible for any failure to meet such requirements.

Following are URLs where you can obtain information on other Texas Instruments products and application solutions:

Products Applications

Audio www.ti.com/audio Communications and Telecom www.ti.com/communications

Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers

Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps

DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy

DSP dsp.ti.com Industrial www.ti.com/industrial

Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical

Interface interface.ti.com Security www.ti.com/security

Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Mobile Processors www.ti.com/omap

Wireless Connectivity www.ti.com/wirelessconnectivity

TI E2E Community Home Page e2e.ti.com

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265