CPC1018N Single-Pole, Normally Open 4-Lead SOP OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance LED Current to operate Rating 60 600 0.8 1 Description Units VP mA mA Features * Designed for Use in Security Systems Complying with EN50130-4 * Only 1mA of LED Current Required to Operate * 1500Vrms Input/Output Isolation * Small 4-Lead SOP Package * TTL/CMOS Compatible Input * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Immune to Radiated EM Fields * SMD Pick & Place, Wave Solderable * Tape & Reel Version Available The CPC1018N is a miniature single-pole, normally open (1-Form-A) solid state relay in a 4-Lead SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The super efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient GaAlAs infrared LED. Clare's state of the art double-molded vertical construction packaging enables the CPC1018N to be one of the world's smallest relays. It offers board space savings of at least 20% over the competitor's larger 4-lead SOP relay. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 10 05 49410 006 Ordering Information Applications * Security * Passive Infrared Detectors (PIR) * Data Signalling * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Aerospace * Industrial Controls Part # CPC1018N CPC1018NTR Description 4-Lead SOP (100/tube) 4-Lead SOP (2000/reel) Pin Configuration 1 + Control - Control 4 3 2 Load Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-CPC1018N-R09 toff e3 www.clare.com 1 CPC1018N Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly 3.33 mW / C Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current (to Activate) 3 Input Dropout Current (to Deactivate) Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t =10ms IL=100mA VL=60VP IL ILPK RON ILEAK - 0.58 - 600 1 0.8 1 mA AP VL=50V, f=1MHz ton toff COUT - 0.47 0.22 40 3 2 - IL=600mA IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.2 0.2 1.2 - 1 1.4 10 mA mA V A - - - 1 - pF IF=5mA, VL=10V A ms pF Load current derates linearly from 600mA @ 25oC to 480mA @80oC. Measurement taken within 1 second of on-time. For applications requiring high temperature operation (greater than 60oC) a LED drive current of 3mA is recommended. www.clare.com R09 CPC1018N PERFORMANCE DATA* 15 10 5 0 25 30 20 25 Device Count (N) 20 Device Count (N) Device Count (N) 25 15 10 5 20 15 10 5 0 0 1.250 1.255 1.260 1.265 1.270 LED Forward Voltage (V) 1.275 0.35 Typical IF for Switch Operation (N=50, IL=600mA, TA=25C) 0.40 0.45 0.50 0.55 Turn-On (ms) 0.60 0.55 0.65 25 25 20 20 20 10 5 0 Device Count (N) 25 15 15 10 5 0.18 0.20 0.22 0.24 LED Current (mA) 0.26 0.75 0.85 Turn-Off (ms) 0.95 1.05 15 10 5 0 0 0.16 0.65 Typical On-Resistance Distribution (N=50, IF=1mA, IL=0.6A, TA=25C) Typical IF for Switch Dropout (N=50, IL=600mA, TA=25C) Device Count (N) Device Count (N) Typical Turn-Off Time (N=50, IF=5mA, IL=100mA, TA=25C) Typical Turn-On Time (N=50, IF=5mA, IL=100mA, TA=25C) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) 0.28 0.16 0.18 0.20 0.22 0.24 LED Current (mA) 0.505 0.510 0.515 0.520 0.525 0.530 0.535 On-Resistance () 0.26 Typical Blocking Voltage Distribution (N=50, TA=25C) 35 Device Count (N) 30 25 20 15 10 5 0 63.5 20 10 0 1.10 1.15 1.20 1.25 1.30 1.35 1.40 1.45 1.50 1.55 LED Forward Voltage(V) 66.5 Typical Turn-Off vs. LED Forward Current (IL=80mA) 0.7 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0.6 Turn-Off (ms) 40 30 64.5 65.0 65.5 66.0 Blocking Voltage (VP) Typical Turn-On vs. LED Forward Current (IL=80mA) LED Forward Voltage vs. Current (TA=25C) Turn-On (ms) LED Forward Current (mA) 50 64.0 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.clare.com 3 CPC1018N PERFORMANCE DATA* 1.4 1.3 1.2 IF=5mA IF=2mA IF=1mA 1.1 1.0 Load Current (mA) 600 0 20 40 60 Temperature (C) 80 Typical IF for Switch Operation vs. Temperature (IL=480mA) -20 0 20 40 60 Temperature (C) 80 100 400 0 -200 -400 -600 -0.3 -20 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.18 0.16 -40 0 20 40 60 80 100 0.016 0.2 0.3 60 80 100 0.9 IF=5mA IF=10mA 0.7 Steady State 0.6 0.5 0.4 0.3 -20 0 20 40 60 Temperature (C) 80 -40 100 -20 72 70 0.70 0.65 0.60 IF=10mA 0.50 0.45 20 40 60 80 100 Typical Blocking Voltage vs. Temperature 0.75 0.55 0 Temperature (C) 0.80 IF=5mA 68 66 64 62 60 58 -40 -20 0 20 40 60 80 100 -40 120 -20 0.012 0.010 0.008 0.006 0.004 0.002 20 40 60 Temperature (C) 80 0 20 40 60 80 100 Temperature (C) Energy Rating Curve (IF=1mA) Load Current (A) Leakage (A) 40 0.8 Typical Leakage vs. Temperature Measured Across Pins 3&4 (VL=60V) 0 20 Typical On-Resistance vs. Temperature (IL=480mA) Temperature (C) -20 0 Typical IF for Switch Dropout vs. Temperature (IL=480mA) 0.014 0 -40 IF=10mA -20 Temperature (C) 0.35 -0.1 0 0.1 Load Voltage (V) IF=5mA Temperature (C) 0.40 -0.2 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -40 Typical Turn-Off vs. Temperature (IL=80mA) Typical Maximum Load Current vs. Temperature Typical Load Current vs. Load Voltage (IF=1mA, TA=25C) 200 IF=10mA -40 100 LED Current (mA) 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.18 0.16 -40 -20 Load Current (A) LED Current (mA) -40 IF=5mA On-Resistance () 1.5 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Blocking Voltage (VP) IF=50mA IF=20mA IF=10mA Turn-On (ms) LED Forward Voltage (V) 1.6 Typical Turn-On vs. Temperature (IL=80mA) Turn-Off (ms) Typical LED Forward Voltage Drop vs. Temperature 100 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R09 CPC1018N Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1018N MSL 3 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1018N 260C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R09 RoHS 2002/95/EC e3 www.clare.com 5 CPC1018N MECHANICAL DIMENSIONS CPC1018N 4.089 0.203 (0.161 0.008) Recommended PCB Land Pattern 0.200 0.025 (0.008 0.001) 0.60 (0.0217) 6.096 0.102 (0.240 0.004) 3.810 0.076 (0.150 0.003) 0.432 0.127 (0.017 0.005) 5.60 (0.2205) 1.02 0.025 (0.040 0.001) Pin 1 2.54 Typ (0.100 Typ) 1.30 (0.0512) 2.184 Max (0.086 Max) 2.54 (0.10) Lead to package standoff: MIN: 0.0254 (0.001) MAX: 0.102 (0.004) 0.762 0.102 (0.030 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) CPC1018N Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 (0.472) B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Dimensions mm (inches) Embossed Carrier Embossment NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1018N-R09 (c)Copyright 2011, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 12/14/2011 6