Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EE100 –
φ10<
φd±0.05
Sleeve
14 min.
3 min.
L✽
✽L<16:L±1.5
L>20:L±2.0
Pressure relief
φ6.3<+
–
<φ8
φD±0.5
F±0.5
φD±0.5
■Country of origin
Malaysia
Radial Lead Type
Series: FR Type: A
■Specifi cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 63 V.DC
Nominal Cap. Range 4.7 µF to 8200 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV (µA) After 2 minutes
tan δ
W.V. 6.3 10 16 25 35 50 63 (120 Hz/+20 °C)
tan δ0.22 0.19 0.16 0.14 0.12 0.10 0.09
Add 0.02 per 1000 µF for products of 1000 µF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
φ5
11/ φ6.3
11.2 : 5000 hours, φ8
11.5/ φ
10
12.5 : 6000 hours
φ8
15/ φ
10
16 : 8000 hours, φ8×20 : 9000 hours
φ
10
20 to φ
10
25/ φ
12.5
20 to φ
12.5
35/ φ
16
20 to φ
16
25 : 10000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■Di men sions in mm (not to scale)
W.V.(V.DC) Cap (µF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 63
4.7 to 33 0.45 0.55 0.75 0.90 1.00
47 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 8200 0.75 0.80 0.95 1.00 1.00
■Frequency correction factor for ripple current
Body Dia. φD56.38 10 12.5 16
Body Length L ————12.5 to 2530 to 35—
Lead Dia. φd0.50.50.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5
■Features
● Low ESR (Same as FM Series)
● Endurance : 5000 h to 10000 h at +105 °C
● RoHS directive compliant
■Attention
Not applicable for automotive
(Unit : mm)
Sep. 201203
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EE101 –
■Case size/Impedance/Ripple current
W.V.(V.DC) 6.3 V to 35 V 50 V
Case size
(φD
L)
Imped ance
(/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
Imped ance
(/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C –10 °C +105 °C +20 °C –10 °C +105 °C
5
11 0. 3 0 0 1.000 280 0.340 1.130 250
6.3
11.2 0.13 0 0.4 3 0 4550.1400.460 405
8
11.5 0.056 0.168 950 0.061 0.183 870
8
15 0.041 0.123 1240 0.045 0.135 1140
8
20 0.030 0.090 1560 0.033 0.099 1430
10
12.5 0.043 0.114 1290 0.042 0.126 1170
10
16 0.028 0.078 1790 0.030 0.090 1650
10
20 0.020 0.057 2180 0.023 0.069 1890
10
25 0.018 0.054 2470 0.022 0.066 2150
12.5
20 0.018 0.045 2600 0.022 0.055 2260
12.5
25 0.015 0.038 3190 0.018 0.045 2660
12.5
30 0.013 0.033 3630 0.016 0.040 3160
12.5
35 0.012 0.030 3750 0.014 0.035 3270
16
20 0.017 0.043 3300 0.019 0.048 2870
16
25 0.014 0.035 3820 0.016 0.040 3320
W.V.(V.DC) 63 V
Case size
(φD
L)
Imped ance
(/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C –10 °C +105 °C
5
11 0.510 2.040 175
6.3
11.2 0.210 0.8 4 0 284
8
11.5 0.092 0.368 566
8
15 0.068 0.272 741
8
20 0.050 0.200 930
10
12.5 0.063 0.252 761
10
16 0.045 0.180 1073
10
20 0.035 0.140 1229
10
25 0.033 0.132 1500
12.5
20 0.033 0.125 1582
12.5
25 0.027 0.092 1995
12.5
30 0.024 0.082 2528
12.5
35 0.021 0.071 2780
16
20 0.029 0.093 2153
16
25 0.024 0.074 2988
Sep. 201203
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EE102 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
6.3
150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR0J151( ) 200 2000
220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J221( ) 200 2000
330 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J331( ) 200 2000
470 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J471( ) 200 2000
820 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR0J821( ) 200 1000
1000 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR0J102( ) 200 1000
1200 8 15 12400.041 8000 0.6 3.5 5.0 EEUFR0J122L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR0J122( ) 200 500
1500 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR0J152L( ) 200 1000
1800 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR0J182( ) 200 500
2200 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR0J222( ) 200 500
2700 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR0J272L( ) 200 500
3900 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR0J392( ) 200 500
4700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR0J472( ) 200 500
5600 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR0J562L 100
6800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR0J682L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR0J682S( ) 100 250
8200 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR0J822( ) 100 250
10
100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1A101( ) 200 2000
150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1A151( ) 200 2000
220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1A221( ) 200 2000
470 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1A471( ) 200 1000
680 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1A681( ) 200 1000
820 10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1A821( ) 200 500
1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A102( ) 200 500
8 15 12400.041 8000 0.6 3.5 5.0 EEUFR1A102L( ) 200 1000
1500 8 20 15600.030 9000 0.6 3.5 5.0 EEUFR1A152L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A152( ) 200 500
1800 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1A182( ) 200 500
2200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1A222L( ) 200 500
3300 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1A332( ) 200 500
3900 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1A392( ) 200 500
4700 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1A472L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1A472S( ) 100 250
5600 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A562L 100
6800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A682L 100
16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1A682( ) 100 250
16
68 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1C680( ) 200 2000
100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1C101( ) 200 2000
120 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1C121( ) 200 2000
220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1C221( ) 200 2000
470 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1C471( ) 200 1000
680 8 15 12400.041 8000 0.6 3.5 5.0 EEUFR1C681L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1C681( ) 200 500
1000 8 20 15600.030 9000 0.6 3.5 5.0 EEUFR1C102L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1C102( ) 200 500
1500 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1C152( ) 200 500
10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C152L( ) 200 500
1800 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C182L( ) 200 500
2200 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1C222( ) 200 500
2700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1C272( ) 200 500
3300 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1C332L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1C332S( ) 100 250
3900 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C392L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1C392S( ) 100 250
4700 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C472L 100
16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1C472( ) 100 250
5600 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1C562( ) 100 250
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Sep. 201203
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EE103 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
25
47 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1E470( ) 200 2000
68 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1E680( ) 200 2000
100 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1E101( ) 200 2000
150 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1E151( ) 200 2000
220 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1E221( ) 200 1000
330 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1E331( ) 200 1000
390 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1E391L( ) 200 1000
470
8 15 12400.041 8000 0.6 3.5 5.0 EEUFR1E471Y( ) 200 1000
8 20 15600.030 9000 0.6 3.5 5.0 EEUFR1E471L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1E471( ) 200 500
560 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E561L( ) 200 1000
680 8 20 15600.030 9000 0.6 3.5 5.0 EEUFR1E681L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1E681( ) 200 500
820 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E821( ) 200 500
1000 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E102( ) 200 500
10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E102L( ) 200 500
1200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E122L( ) 200 500
1500 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1E152( ) 200 500
1800 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1E182( ) 200 500
2200 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1E222L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E222S( ) 100 250
2700 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1E272L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E272S( ) 100 250
3300 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1E332( ) 100 250
35
33 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1V330( ) 200 2000
68 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1V680( ) 200 2000
100 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V101( ) 200 1000
180 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V181( ) 200 1000
220 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V221( ) 200 1000
270 8 15 12400.041 8000 0.6 3.5 5.0 EEUFR1V271L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1V271( ) 200 500
330 10 12.5 1330 0.043 6000 0.6 5.0 5.0 EEUFR1V331U( ) 200 500
390 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1V391L( ) 200 1000
470 8 20 15600.030 9000 0.6 3.5 5.0 EEUFR1V471L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1V471( ) 200 500
560 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V561( ) 200 500
680 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V681( ) 200 500
10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V681L( ) 200 500
820 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V821L( ) 200 500
1000 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1V102( ) 200 500
1200 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1V122( ) 200 500
1500 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1V152L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1V152S( ) 100 250
1800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V182L 100
2200 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V222L 100
16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1V222( ) 100 250
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Sep. 201203
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EE104 –
■Standard Prod ucts (Low Voltage)
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+105 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (µF) (mm) (mm)
(mA r.m.s.)
()(hours)(mm)(mm) (mm) (mm) (pcs) (pcs)
50
4.7 5 11 185 0.620 5000 0.5 2.0 5.0 2.5 EEUFR1H4R7( ) 200 2000
10 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 EEUFR1H100( ) 200 2000
22 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 EEUFR1H220( ) 200 2000
47 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 EEUFR1H470( ) 200 2000
56 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 2.5 EEUFR1H560( ) 200 2000
100 8 11.5 870 0.061 6000 0.6 3.5 5.0 EEUFR1H101( ) 200 1000
120 8 15 1140 0.045 8000 0.6 3.5 5.0 EEUFR1H121L( ) 200 1000
150 10 12.5 1170 0.042 6000 0.6 5.0 5.0 EEUFR1H151( ) 200 500
180 8 20 1430 0.033 9000 0.6 3.5 5.0 EEUFR1H181L( ) 200 1000
220 10 16 1650 0.030 8000 0.6 5.0 5.0 EEUFR1H221( ) 200 500
270 10 20 1890 0.023 10000 0.6 5.0 5.0 EEUFR1H271( ) 200 500
330 10 25 2150 0.022 10000 0.6 5.0 5.0 EEUFR1H331L( ) 200 500
470 12.5 20 2260 0.022 10000 0.6 5.0 5.0 EEUFR1H471( ) 200 500
560 12.5 25 2660 0.018 10000 0.6 5.0 5.0 EEUFR1H561( ) 200 500
680 12.5 30 3160 0.016 10000 0.8 5.0 EEUFR1H681L 100
820 12.5 35 3270 0.014 10000 0.8 5.0 EEUFR1H821L 100
16 20 2870 0.019 10000 0.8 7.5 7.5 EEUFR1H821S( ) 100 250
1000 16 25 3320 0.016 10000 0.8 7.5 7.5 EEUFR1H102( ) 100 250
63
18 5 11 175 0.510 5000 0.5 2.0 5.0 2.5 EEUFR1J180( ) 200 2000
47 6.3 11.2 284 0.210 5000 0.5 2.5 5.0 2.5 EEUFR1J470( ) 200 2000
82 8 11.5 566 0.092 6000 0.6 3.5 5.0 EEUFR1J820( ) 200 1000
100 8 15 7410.068 8000 0.6 3.5 5.0 EEUFR1J101L( ) 200 1000
10 12.5 761 0.063 6000 0.6 5.0 5.0 EEUFR1J101( ) 200 500
120 8 20 9300.050 9000 0.6 3.5 5.0 EEUFR1J121L( ) 200 1000
10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J121( ) 200 500
150 8 20 9300.050 9000 0.6 3.5 5.0 EEUFR1J151L( ) 200 1000
10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J151( ) 200 500
180 10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J181( ) 200 500
220 10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J221L( ) 200 500
270
10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J271U( ) 200 500
10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J271L( ) 200 500
12.5 20 1582 0.033 10000 0.6 5.0 5.0 EEUFR1J271( ) 200 500
330 12.5 20 1582 0.033 10000 0.6 5.0 5.0 EEUFR1J331( ) 200 500
390 12.5 25 1995 0.027 10000 0.6 5.0 5.0 EEUFR1J391( ) 200 500
470 12.5 25 1995 0.027 10000 0.6 5.0 5.0 EEUFR1J471( ) 200 500
560 12.5 30 2528 0.024 10000 0.8 5.0 EEUFR1J561L 100
16 20 2153 0.029 10000 0.8 7.5 7.5 EEUFR1J561S( ) 100 250
680 12.5 35 2780 0.021 10000 0.8 5.0 EEUFR1J681L 100
820 16 25 2988 0.024 10000 0.8 7.5 7.5 EEUFR1J821( ) 100 250
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Sep. 201203
