The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH19C & FH19SC Series FH19C - FPC/FFC thickness: 0.20.03mm Actuator color: Brown FH19SC - FPC/FFC thickness: 0.30.03mm Actuator color: Black Features 0.9mm high 1. Low-profile 0.5mm pitch FPC/FFC Connectors Miniaturization of portable equipment and personal mobile devices has created increased demand for a low profile, high density, and high reliability connectors. m 17m m 3m *The design of this connector has been made thinner and smaller, with a height of 0.9mm and width of 3mm. *PCB footprint: Reduced approximately 48% (as compared with Hirose Electric's 0.5mm pitch FH12 Series connectors) *Connector weight: Reduced approximately 78% (as compared with Hirose Electric's 0.5mm pitch FH12 Series connectors) 0.9mm Can be mounted over conductive traces 2. Conductive traces on the PCB can run under the connector All bottom surface of the connector is solid, without any exposure of the contact. 3. Proven Flip-Lock Actuator System assures easy and reliable operation Rotating actuator permits easy insertion and reliable connection with the FPC & FFC. Tactile sensation confirms complete mechanical locking of the actuator and the electrical connection. 4. Accepts 0.2mm & 0.3mm thick FPC/FFC No exposed contacts on the bottom of the connector. The connector will also terminate with 0.2mm thick Flat Flexible Cable (FFC). 5. Board placement with automatic equipment Flat top surface and packaged on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 5,000 pieces. Enclosed construction (No exposed contacts) Metal fittings (Leadless) Metal Fittings (Leadless Type) No protrusions on the sides allows close side-by-side board placement. Actuator Temporary Hold Mechanism Applications Notebook PC's, PDA's, digital cameras and other compact devices requiring interconnections of the main circuit board with the LCD, plasma display (PDP), HDD or other compact devices requiring FPC/FFC connections using low profile, high reliability ZIF connectors. Actuator stays open during insertion of the FPC/FFC. 26 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on theboard, Hirose website RoHS search at www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH19C & FH19SC Series0.5mm pitch, 0.9mm above the Flexible Printed Circuit & Flexible Flat Cable Connectors Product Specifications Current rating 0.5 A (Note1) Operating temperature range -55c to +85c (Note 2) Voltage rating 50 V AC Operating humidity range Relative humidity 90% max. (No condensation) Rating Recommended FPC, FFC FH19C Series Thickness: = 0.2 0.03mm Gold plated FH19SC Series Thickness: = 0.3 0.03mm Gold plated Storage temperature range -10c to +50c (Note 3) Storage humidity range Relative humidity 90% max. (No condensation) Item 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance Specification 500 M ohms min. No flashover or insulation breakdown 100 m ohms max. *Including FPC/FFC conductor resistance Conditions 1 mA 4. Durability (insertion/ withdrawal) Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. 20 cycles 5. Vibration No electrical discontinuity of 1 s or more. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. Frequency: 10 to 55 Hz, single amplitude of 0.75mm, 10 cycles in each of the 3 directions 6. Shock No electrical discontinuity of 1 s. min. Contact resistance: 100 m ohms max. No damage, cracks, or parts dislocation. Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 3 cycles in each of the 3 axis. 7. Humidity (Steady state) Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. No damage, cracks, or parts dislocation. 96 hours at temperature of 40c and humidity of 90 to 95% 8. Temperature cycle Contact resistance: 100 m ohms max. Insulation resistance: 100 M ohms min. No damage, cracks, or parts dislocation. Temperature: -55c / +15c to +35c / +85c / +15c to +35c Time : -30 / 2 to 3 / +30 / 2 to 3(Minutes) 5 cycles 9. Resistance to soldering heat No deformation of components affecting performance. Manual soldering: 350c5c for 5 seconds 100 V DC 150 V AC/1 minute Reflow: At the recommended temperature profile Note 1: When passing the current through all of the contacts, use 70% of the current rating. Note 2: Includes temperature rise caused by current flow. Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. Materials Part Insulator Material LCP Actuator PPS/LCP Contacts Metal fittings Phosphor bronze Phosphor bronze Finish Color: Beige Color: Brown (FH19C Series) Color: Black (FH19SC Series) Gold flash plated Pure tin reflow plated Remarks UL94V-0 ------------- Ordering information FH19 1 C - 30S - 0.5 SH (05) 2 3 4 5 6 1 Series name : FH19 4 Contact pitch : 2 FPC/FFC thickness : 0.2mm FPC/FFC thickness : 0.3mm 5 Terminal type 4 to 50 6 Material and plating specifications : C : SC : 3 No. of contacts : 0.5mm SH: SMT horizontal mounting type Actuator material FH19C FH19SC 4 to 10 pos. FH19SC 11 to 50 pos. PPS LCP Contact: Gold flash plated ------ (05) Contact: Gold flash plated (05) ------ Contact: Gold flash plated ------ (05) 27 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products&have been discontinued, or will be discontinued soon. Please check the status on the Hirose websiteCircuit RoHS search at www.hirose-connectors.com, contact your Hirose sales representative. FH19C FH19SC Series0.5mm pitch, 0.9mm above theproducts board, Flexible Printed & Flexible Flat Cable ZIForConnectors Connector Dimension [FH19C Series] 3 A0.15 B +0.15 0 (0.15) 2.50.15 (1) 0.15 G 0.5 0.5 0.90.1(Including contact terminal leads) G Number of contacts Polarizing mark indicator (0.5) A (130) (1.6) Number of contacts indicator (0.15) (C: FPC insertion slot dimension) 2 0.15MAX 1 0.15MAX D0.1 (1.3) 1 2 S 2.150.2 Notes 1 The coplanarity of each terminal lead and metal fitting is within 0.1 2 The contact terminal lead position indicates the dimension from the bottom surface of the insulator body. 3 Difference between terminal contact to be max. 0.1mm. 4 Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. Note that preventive hole for sink mark could be added for improvement. Unit: mm CL No. Number of Contacts A B C D FH19C-04S-0.5SH(05) CL580-0410-1-05 4 04.0 01.5 02.57 03.35 FH19C-06S-0.5SH(05) CL580-0409-2-05 6 05.0 02.5 03.57 04.35 FH19C-07S-0.5SH(05) CL580-0411-4-05 7 05.5 03.0 04.07 04.85 FH19C-08S-0.5SH(05) CL580-0404-9-05 8 06.0 03.5 04.57 05.35 FH19C-09S-0.5SH(05) CL580-0403-6-05 9 06.5 04.0 05.07 05.85 FH19C-10S-0.5SH(05) CL580-0412-7-05 10 07.0 04.5 05.57 06.35 FH19C-12S-0.5SH(05) CL580-0413-0-05 12 08.0 05.5 06.57 07.35 FH19C-13S-0.5SH(05) CL580-0405-1-05 13 08.5 06.0 07.07 07.82 FH19C-15S-0.5SH(05) CL580-0406-4-05 15 09.5 07.0 08.07 08.85 FH19C-17S-0.5SH(05) CL580-0408-0-05 17 10.5 08.0 09.07 09.85 FH19C-20S-0.5SH(05) CL580-0402-3-05 20 12.0 09.5 10.57 11.35 FH19C-21S-0.5SH(05) CL580-0414-2-05 21 12.5 10.0 11.07 11.85 FH19C-24S-0.5SH(05) CL580-0407-7-05 24 14.0 11.5 12.57 13.35 FH19C-27S-0.5SH(05) CL580-0401-0-05 27 15.5 13.0 14.07 14.85 FH19C-30S-0.5SH(05) CL580-0400-8-05 30 17.0 14.5 15.57 16.35 FH19C-34S-0.5SH(05) CL580-0419-6-05 34 19.0 16.5 17.57 18.35 FH19C-40S-0.5SH(05) CL580-0416-8-05 40 22.0 19.5 20.57 21.35 FH19C-50S-0.5SH(05) CL580-0417-0-05 50 27.0 24.5 25.57 26.35 Part Number Note1: Embossed tape reel packaging (5,000 pieces/reel). Order by number of reels. 28 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on theboard, Hirose website RoHS search at www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH19C & FH19SC Series0.5mm pitch, 0.9mm above the Flexible Printed Circuit & Flexible Flat Cable Connectors [FH19SC Series] 3 A0.15 (0.15) 2.50.15 (1) 0.15 G 0.5 0.5 +0.15 0 G Number of contacts 0.930.1(Including contact terminal leads) B A Polarizing mark indicator (0.5) 5 (130) (1.6) Number of contacts indicator (0.15) (C: FPC insertion slot dimension) 2 1 0.15MAX D0.1 0.15MAX (1.3) 1 2 S 2.150.2 Notes 1 2 3 4 5 The coplanarity of each terminal lead and metal fitting is within 0.1 The contact terminal lead position indicates the dimension from the bottom surface of the insulator body. Difference between terminal contact to be max. 0.1mm. Any discoloration of the plastic compound will NOT AFFECT form, fit or function of the connector. The contacts are protruding. 0.03mm max. from the housing top surface. Unit: mm Part Number CL No. Number of Contacts FH19SC-04S-0.5SH(05) CL580-0517-5-05 4 FH19SC-05S-0.5SH(05) CL580-0515-0-05 5 A 04.0 B 01.5 C D 02.57 03.35 02.0 02.5 03.07 03.85 FH19SC-06S-0.5SH(05) CL580-0501-5-05 6 04.5 05.0 03.57 04.35 FH19SC-08S-0.5SH(05) CL580-0520-0-05 8 06.0 03.5 04.57 05.35 FH19SC-09S-0.5SH(05) CL580-0507-1-05 9 05.85 CL580-0508-4-05 10 04.0 04.5 05.07 FH19SC-10S-0.5SH(05) 06.5 07.0 05.57 06.35 FH19SC-12S-0.5SH(05) CL580-0512-1-05 12 07.35 CL580-0518-8-05 13 05.5 06.0 06.57 FH19SC-13S-0.5SH(05) 08.0 08.5 07.07 07.85 FH19SC-14S-0.5SH(05) CL580-0509-7-05 14 09.0 06.5 07.57 08.35 FH19SC-15S-0.5SH(05) CL580-0503-0-05 15 08.85 CL580-0521-2-05 16 07.0 07.5 08.07 FH19SC-16S-0.5SH(05) 09.5 10.0 08.57 09.35 FH19SC-17S-0.5SH(05) CL580-0504-3-05 17 09.85 CL580-0519-0-05 18 08.0 08.5 09.07 FH19SC-18S-0.5SH(05) 10.5 11.0 09.57 10.35 FH19SC-20S-0.5SH(05) CL580-0502-8-05 20 12.0 09.5 10.57 11.35 FH19SC-21S-0.5SH(05) CL580-0505-6-05 21 22 10.0 10.5 11.85 CL580-0506-9-05 12.5 13.0 11.07 FH19SC-22S-0.5SH(05) 11.57 12.35 FH19SC-24S-0.5SH(05) CL580-0511-9-05 24 13.35 CL580-0510-6-05 26 11.5 12.5 12.57 FH19SC-26S-0.5SH(05) 14.0 15.0 13.57 14.35 FH19SC-27S-0.5SH(05) CL580-0516-2-05 27 15.5 13.0 14.07 14.85 FH19SC-28S-0.5SH(05) CL580-0513-4-05 28 15.35 CL580-0500-2-05 30 13.5 14.5 14.57 FH19SC-30S-0.5SH(05) 16.0 17.0 15.57 16.35 FH19SC-32S-0.5SH(05) CL580-0514-7-05 32 17.35 CL580-0522-5-05 40 15.5 19.5 16.57 FH19SC-40S-0.5SH(05) 18.0 22.0 20.57 21.35 FH19SC-45S-0.5SH(05) CL580-0523-8-05 45 50 22.0 24.5 23.85 CL580-0524-0-05 24.5 27.0 23.07 FH19SC-50S-0.5SH(05) 25.57 26.35 RoHS YES Note1: Embossed tape reel packaging (5,000 pieces/reel) . Order by number of reels. 29 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products&have been discontinued, or will be discontinued soon. Please check the status on the Hirose websiteCircuit RoHS search at www.hirose-connectors.com, contact your Hirose sales representative. FH19C FH19SC Series0.5mm pitch, 0.9mm above theproducts board, Flexible Printed & Flexible Flat Cable ZIForConnectors BRecommended PCB Land and Metal Mask Dimensions [Common to FH19C & FH19SC Series] Recommended metal mask thickness: 0.10 mm. 0.80.05 B Number of contacts H (0.2) (0.15) 0.80.05 3.30.05 (0.05) J0.1 (3) (0.15) 0.30.05 (Land) 0.250.05 (Metal mask) (0.15) (0.15) 0.1 H (2.5) 0.5 K0.1 (A) BRecommended FPC, FFC Dimensions [Common to FH19C & FH19SC Series] L0.05 FH19C Series FH19SC Series 0.20.03 0.30.03 (X) 3.5 min. (Stiffener) 2.50.3 (Exposed traces) 2R0 0.350.03(FPC) 0.30.03(FFC) 0.50.03 3.5 min. (Stiffener) B0.03 .2 0.50.07 Note1: Polyamide and a thermally hardened adhesive is recommended as the materials for the stiffener. Note2: Stiffener dimension should be 3.5mm min., and X dimension should be 0.5mm for improved flexibility of FPC. Unit: mm Number of Contacts 04 05 06 07 08 09 10 12 13 14 15 16 17 18 30 A 04.0 04.5 05.0 05.5 06.0 06.5 07.0 08.0 08.5 09.0 09.5 10.0 10.5 11.0 B 01.5 02.0 02.5 03.0 03.5 04.0 04.5 05.5 06.0 06.5 07.0 07.5 08.0 08.5 J 03.1 03.6 04.1 04.6 05.1 05.6 06.1 07.1 07.6 08.1 08.6 09.1 09.6 10.1 K 03.9 04.4 04.9 05.4 05.9 06.4 06.9 07.9 08.4 08.9 09.4 09.9 10.4 10.9 L 02.5 03.0 03.5 04.0 04.5 05.0 05.5 06.5 07.0 07.5 08.0 08.5 09.0 09.5 Unit: mm Number of Contacts 20 21 22 24 26 27 28 30 32 34 40 45 50 A 12.0 12.5 13.0 14.0 15.0 15.5 16.0 17.0 18.0 19.0 22.0 24.5 27.0 B 09.5 10.0 10.5 11.5 12.5 13.0 13.5 14.5 15.5 16.5 19.5 22.0 24.5 J 11.1 11.6 12.1 13.1 14.1 14.6 15.1 16.1 17.1 18.1 21.1 23.6 26.1 K 11.9 12.4 12.9 13.9 14.9 15.4 15.9 16.9 17.9 18.9 21.9 24.4 26.9 L 10.5 11.0 11.5 12.5 13.5 14.0 14.5 15.5 16.5 17.5 20.5 23.0 25.5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on theboard, Hirose website RoHS search at www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH19C & FH19SC Series0.5mm pitch, 0.9mm above the Flexible Printed Circuit & Flexible Flat Cable Connectors BPackaging Specifications [Common to FH19C & FH19SC Series] Embossed Carrier Tape Dimensions 80.1 (Q) O1 .5 (0.3) (3.3) Flat surface for placement with automatic equipment (4.3) Unreeling direction M0.3 1.750.1 20.15 + 0. 0 1 40.1 N0.1 (1.7) (1) (O1 3) Reel Dimensions (O80) (O380) (R:INSIDE) (T:OUTSIDE) End cection Blank cection Mounting cection Embossed carrier tape (10 pockets min.) Lead cection (400 mm min.) Blank cection Top cover tape (10 pockets min.) Unit: mm Number of Contacts 04 05 06 07 08 09 10 12 13 14 15 16 17 18 M 16 16 16 16 16 16 16 16 16 16 16 24 24 24 N 07.5 07.5 07.5 07.5 07.5 07.5 07.5 07.5 07.5 07.5 07.5 11.5 11.5 11.5 Q 04.3 04.8 05.3 05.8 06.3 06.8 07.3 08.3 08.8 09.3 09.8 10.3 10.8 11.3 R 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 25.4 25.4 25.4 T 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 29.4 29.4 29.4 Unit: mm Number of Contacts 20 21 22 24 26 27 28 30 32 34 40 45 50 M 24 24 24 24 24 24 24 24 32 32 44 44 44 N 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 14.2 20.2 20.2 20.2 Q 12.3 12.8 13.3 14.3 15.3 15.8 16.3 17.3 18.3 19.3 22.3 24.8 27.3 R 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 33.4 33.4 45.4 45.4 45.4 T 29.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 37.4 37.4 49.4 49.4 49.4 Note: 5,000 pieces per reel. Embossed tape 32 mm or wider will have perforated feed holes on two sides. 31 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products&have been discontinued, or will be discontinued soon. Please check the status on the Hirose websiteCircuit RoHS search at www.hirose-connectors.com, contact your Hirose sales representative. FH19C FH19SC Series0.5mm pitch, 0.9mm above theproducts board, Flexible Printed & Flexible Flat Cable ZIForConnectors BFH19C & FH19SC Series FPC/FFC Construction (Recommended Specifications) 1. Using Single-sided FPC FPC : Flexible Printed Circuit Material Material Name Covering layer film Polyimide 1 mil thick 25 25 25 25 3 3 35 35 Base adhesive 25 25 Base film 1 mil thick 25 25 Reinforcement material adhesive Heat-hardened adhesive 30 30 Stiffener 75 175 193 293 Cover adhesive 2. Using Double-sided FPC Surface treatment Nickel under plated 1 to 5m / Gold plated 0.2m Copper foil Cu Polyimide Polyimide Total 1oz 3 mil thick FPC : Flexible Printed Circuit Material Name Covering layer film Cover adhesive Material Polyimide 1 mil thick Surface treatment Nickel under plated 1 to 5m / Gold plated 0.2m Through-hole copper Cu Copper foil Cu 1/2oz Base adhesive Base film Polyimide 1 mil thick Base adhesive Copper foil Cu 1/2oz Cover adhesive 3. Using FFC (Flexible Flat Cable) Thickness (m) FH19C FH19SC Thickness (m) FH19C FH19SC 25 25 25 25 3 3 15 15 18 18 18 18 25 25 18 18 18 18 25 25 Covering layer film Polyimide 1 mil thick 25 25 Reinforcement material adhesive Heat-hardened adhesive 25 50 Stiffener Polyimide Total 1 mil thick 25 100 197 297 FFC : Flexible Flat Cable Material Name Material Thickness (m) FH19C FH19SC Polyester film 12 12 Adhesive 30 30 (Nickel under plated / Gold plated), soft copper film 35 35 Adhesive 30 30 Polyester 12 12 Adhesive Polyester 30 30 Stiffener Polyester 100 188 Total 207 295 Polyester thermoplastic type Polyester * Practical tolerance of thickness dimension is 20m (i.e., 187 to 227m). Note 1: This specification is a recommendation for the FH19C, FH19SC Series connectors using 0.2/0.3 0.03mm thick FPC/FFC. 32 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on theboard, Hirose website RoHS search at www.hirose-connectors.com, or contact your ZIF Hirose sales representative. FH19C & FH19SC Series0.5mm pitch, 0.9mm above the Flexible Printed Circuit & Flexible Flat Cable Connectors BRecommended Temperature Profile [For FH19C & FH19SC Series] MAX 250c HRS test condition Solder method 250 230c Temperature(c) 200 200c 150 :Reflow, IR/hot air (Nihon Den-netsu Co., Ltd.'s Environment Part Number: SENSBY NR-2) :Room air Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part Number:M705-221CM5-42-10.5) 150c Test board 100 50 :Glass epoxy 45mm100mm1.6mm thick Land dimensions :0.3mm0.8mm Metal mask :0.25mm0.8mm0.1mm This temperature profile is based on the above conditions. 25c (60 sec.) 90 sec. to 120 sec. (60 sec.) 0 Start Preheating Soldering In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult tour solder paste and equipment manufacturer for specific recommendations. Time (Seconds) 33 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products&have been discontinued, or will be discontinued soon. Please check the status on the Hirose websiteCircuit RoHS search at www.hirose-connectors.com, contact your Hirose sales representative. FH19C FH19SC Series0.5mm pitch, 0.9mm above theproducts board, Flexible Printed & Flexible Flat Cable ZIForConnectors BOperation and Precations Operation 1. FPC/FFC Termination procedure. Connector installed on the board. Precautions 1) Do not apply excessive force or use any type of tool to operate the actuator. 1) Lift up the actuator. Use thumb or index finger. 2) Assure that the FPC/FFC is fully inserted parallel to mounting surface, with the exposed conductive traces facing down. 2) The connector will assure reliable performance when the actuator is open to 130 maximum. Do not exceed this angle, as this may cause permanent damage to the connector. FPC conductor surface (Bottom side) 3) Rotate down the actuator until firmly closed. It is critical that the inserted FPC/FFC is not moved and remains fully inserted. Should the FPC/FFC be moved, open the actuator and repeat the process, starting with Step 1 above. 2. FPC/FFC Removal 1) Lift up the actuator. 2) Carefully remove the FPC/FFC. 34 3) Application of excessive force to the inserted FPC/FFC may cause damage to connector and may affect the reliability of electrical connection. If specific application requires continuous or repeated pull or bend of the inserted FPC/FFC, assure that the forces are NOT transmitted directly to the connector.