Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed
to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use.
Semelab encourages customers to verify that datasheets are current before placing orders.
Document Number 3979
Issue 1
2N6300
2N6301
ELECTRICAL CHARACTERISTICS 2N6300 (Tcase = 25°C unless otherwise stated)
Collector – Emitter Sustaining
Voltage 1
Collector Cut–off Current
Collector Cut–off Current
Emitter Cut–off Current
DC Current Gain
Collector – Emitter Saturation
Voltage
Base – Emitter Saturation Voltage
Base – Emitter On Voltage
Output Capacitance
Magnitude of Common Emitter
Small Signal Short Circuit Current
Transfer Ratio
Small Signal Current Gain
60
0.5
0.5
5.0
2.0
750 18000
100 2.0
3.0
4.0
2.8
200
4.0
300
V
mA
mA
mA
—
V
V
V
pF
—
—
VCEO(sus)
ICEO
ICEX
IEBO
hFE
VCE(sat)
VBE(sat)
VBE(on)
Cob
hfe
hfe
Notes
DYNAMIC CHARACTERISTICS
ON CHARACTERISTICS 1
OFF CHARACTERISTICS
Parameter Test Conditions Min. Typ. Max. Unit
1 Pulse test: tp= 300µs , Duty Cycle = 2%
IC= 100mA IB= 0
VCE = 30V IB= 0
VCE = Rated VCB VBE(off) = 1.5V
TC= 150°C
VBE = 5V IC= 0
VCE = 3V IC= 4A
VCE = 3V IC= 8A
IC= 4A IB= 16mA
IC= 8A IB= 80mA
IC= 8A IB= 80mA
VCE = 3V IC= 4A
VCB = 10V IE= 0
f = 0.1MHz
VCE = 3V
IC= 3A
f = 1MHz
VCE = 3V IC= 3A
f = 1kHz