Single-In-Line Conformal Coated RoHS Compliant D Series * * * 4 to 14 Leads Standard and custom circuits Space saving design Specification Reverse Voltage, VR 80V Reverse Current, IR 1.0A (VR = 70V) Forward Current, IF 100mA Average, 300mA Surge (1s Max.) Forward Voltage, VF 1.2V @ IF = 100mA Package Power, PPKG 200mW @ 25oC Reverse Recovery Time, trr Capacitance, C Storage Temperature Range Operating Temperature Range 4ns (VR = 6V, IF = 5mA, RL = 50) 5.5pF (VR = 6V, f = 1MHz) - 55C to 125C - 25C to 80C General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 03.12 Single-In-Line Conformal Coated RoHS Compliant D Series Specification Circuit Type Polarity "A" Polarity "C" 1 N = 4 to 14 2 N = 3 to 13 (Odd #) 3 N = 4 to 14 (Even #) 5 N = 4 to 14 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 03.12 Single-In-Line Conformal Coated RoHS Compliant D Series Outline Dimensions (Inch/mm) Typical Part Marking General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 03.12 Single-In-Line Conformal Coated RoHS Compliant D Series Ordering Information D 8-3 C Model Polartity (see schematic) A = Common Anode ( circuit 1, circuit 2) Annode is at pin number 1 (circuit 3, circuit 5) Number of pins: 4 to 14 Circuit type: 1 = Bussed with pin 1 in common. 2 = Bussed with centered common. 3 = Isolated. 5 = Dual termination. C = Common Cathode (circuit 1, circuit 2) Cathode is at pin number 1 (circuit 3, circuit 5) Material Part Material Substrate Alumina ceramic Diode Small mold package silicon expitaxial planar diode array Termination 100% Ag Lead Pins 100% Sn Plated steel Junction and Lead Pin finish 96%Sn, 3.5%Ag, 0.5%Cu Conformal Coat Expoxy resin, UL-94 V-0 rated Packaging Number of pins Qty. per plastic bag Qty. per box 3 to 6 100 1000 7 to 12 100 500 13 to 14 50 250 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 03.12