A86
FX2 Series●1.27mm Pitch Multi-function Two Piece Connector
3. Board to board type
qFlux swell prevention
The straight through hole type takes the complete flux
tight action from the board back side at solder dipping.
The type is prepared, corresponding to whether or not
cleaning is required.
wStack height 12mm to 16mm
The board stack height can be set to every 1 mm unit up
to 12 to 16mm.
eMis-insertion preventive mechanism
The mating area is designed in a mechanism so as to
prevent mis-insertion, and complete countermeasures
have been taken against wrenching.
4. Board to cable type
qComplete lock with easy operation
Employing the inner lock system, complete lock and eject
actions can be performed with easy operation.
wApplicable cable
The applicable cable is the <UL2651>AWG#28 flat cable
(7/0.127mm), and the jacket size is 0.9±0.1mm.
5. SMT type
Strength security with metaltab
The right angle type is equipped with metaltab to secure
soldering strength, and constructed so as to fix by
screws. The straight type can choose whether or not
metaltab are required.
■Applications
Computers, peripheral equipments, various machines etc.
■Product Specifications
Rating Current rating 0.5A
Operating Temperature Range -55ç to +85ç(Note 1)
Storage Temperature Range -10ç to +60ç(Note 2)
Voltage rating 125V AC
Operating Humidity Range 40 to 80%
Storage
Humidity Range
40 to 70% (Note 2)
Item Specification Condition
1. Insulation Resistance 1000M ohms min 250V DC
2. Withstanding Voltage No flashover or insulation breakdown. 300V AC/1 minute
3. Contact Resistance 45m ohms max. 100mA
4.
Vibration
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Contact resistance: 55m ohms max. Insulation resistance: 100M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
Contact resistance: 55m ohms max. (-55ç: 30 minutes→15 to 35ç: 2 to 3 minutes →
6. Temperature Cycle Insulation resistance: 100M ohms min.
(-85ç: 30 minutes→15 to 35ç: 2
to
3 minutes) 5 cycles
No damage, cracks, or parts looseness.
7.
Durability (Mating/un-mating)
Contact resistance: 55 m ohms max. 500 cycles
SMT Type
Reflow: At the recommended temperature profile
8.
Resistance to soldering heat
No deformation of components affecting performance.
Manual soldering: 360ç for 5 seconds
DIP Type Solder bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
a specific part number shown.
■Material
Parts Material Finish Remark
Insulator Dip type Polyamid Black
Socket PBT/Polyamid UL94V-0
SMT type PPS Light brown
Contact Receptacle Phosphor bronze
Socket Selective gold plated ________
Header Phosphor bronze or brass
■Stacking Variation
Receptacle
Header
Dip type SMT type
FX2C-*S-1.27DSA(L)
FX2CA-*S-1.27DSA(L)
FX2C2-*S-1.27DSA(L)
FX2CA2-*S-1.27DSA(L)
FX2-*S-1.27SV(L)
FX2C-*P-1.27DSA(L)
FX2CA-*P-1.27DSA(L)
FX2CA1-*P-1.27DSA(L)
FX2CA2-*P-1.27DSA(L)
FX2-*P-1.27SV(L)
Dip type
SMT type
12.0
13.0
14.0
12.1
14.0
15.0
16.0
14.1
12.2
13.2
14.2
12.3
Unit:mm
Sep.1.2020Copyright2020HIROSEELECTRICCO.,LTD.AllRightsReserved.