TECHNICAL DATA SHEET | 1/3 STRAIGHT BULKHEAD JACK PANEL SEAL R125.326.901 CRIMP TYPE - CABLE .085 Series : SMA HEX 8 / flats |24 Hex 11/ flats 5.9 / flats REF PLANE gp scale :1/1 PANEL CUT OUT A ts mm Maxi | mini A 6.5 6.4 B 6.15 6 All dimensions are in mm. - & COMPONENTS MATERIALS PLATINGS (pum) BODY STAINLESS STEEL PASSIVATED . CENTER CONTACT BERYLLIUM COPPER GOLD 2.5 OVER NICKEL 2 OUTER CONTACT - INSULATOR PTFE GASKET SILICONE RUBBER OTHERS PARTS STAINLESS STEEL PASSIVATED . Issue : 0608 D i) In the effort to improve our products, we reserve the right to make changes judged tobe ll R A D | A LL necessary. eat Uebel TECHNICAL DATA SHEET | 2/3 STRAIGHT BULKHEAD JACK PANEL SEAL R125.326.901 CRIMP TYPE - CABLE .085 Series : SMA PACKAGING SPECIFICATION Standard Unit Other 100 100 W option Contact Us (| eweeneeceecinee CABLE ASSEMBLY ELECTRICAL CHARACTERISTICS Stripping | a b c d e Impedance 50 mm 1,78 | 0,00 | 0,00 | 0,00 | 0,00 | 0,00 Frequency 0-18 GHz VSWR 1.07 + 0,0100 x F(GHz) Maxi Insertion loss 0.03 VF(GHz) dB Maxi Assembly instruction : RF leakage -( 60 - F(GHz)) dB mini Voltage rating 335 Veff Maxi Recommended cable(s) Dielectric withstanding voltage 750 Vetf mini KS 1 Insulation resistance 5000 MOQ mini RG 405 Cable retention - pull off 130 Nmim ~ torque NA N.cm MECHANICAL CHARACTERISTICS TOOLING Center contact retention Axial force Mating end 27 N mini Part Number Description Hexagon Axial force Opposite end 27 N mini } j Torque 2.8 N.cm mini R282.705.000 |POSITIONER _|- R282.286.000 | CRIMPING TOOL | - R282.255,000 | PNEUMATIC Recommended torque CRIMPING TOOL Mating NA N.cm R282.711.000 | GUIDE Panel nut 150 N.cm R282.051.000 | STRIPPING TOOL Clamp nut NA N.cm R282.062.000 | POINTER GAUGE A/F clamp nut 60,0000 mm R282.710.000 | GUIDE Mating life 500 Cycles mini Weight 3,9495 OTBERS CHARACTERISTICS ENVIRONMENTAL Operating temperature -65/+105 Hermetic seal NA Atm.cm3/s Panel leakage NA Issue : 0608 D TTT In the effort to improve our products, we reserve the right to make changes judged to be ee R A D i A LL necessary. / TECHNICAL DATA SHEET | 3/3 STRAIGHT BULKHEAD JACK PANEL SEAL CRIMP TYPE - CABLE .085 R125.326.901 Series : SMA COMPONENTS BODY SLEEVE STIPPING DIMENSIONS 1 3 -Strip the cable.with the cable stripping tool -Trim the cable inner conductor with the trimmer. Clean the cable nsert the connector and the cable on the crimping tool with guide and positioner. A pneumatic crimping tool exist too that can be used Crimping tool 2 4 -Slide connector onto the cable comnector Issue : 0608 D In the effort to improve our products, we reserve the right to make changes judged to be necessary. -Press the connector on the cable.