Automotive and Industrial Qualified Bluetooth Low Energy Wireless MCUs Kinetis(R) KW36/35/34 Bluetooth 5 Wireless MCUs with Integrated CAN/ CAN FD and LIN Bus Kinetis KW36/35/34 wireless MCUs feature AEC-Q100 Grade 2 or industrial qualification and the latest Bluetooth technology for superior durability and performance in automotive, industrial and healthcare applications. OVERVIEW Based on the Arm(R) Cortex(R)-M0+ core, the Kinetis KW36/35/34 wireless MCUs integrates a Bluetooth Low Energy version 5 and Generic FSK radio. The radio supports up to 8 simultaneous secure connections in any master/ slave combination allowing multiple authorized users to communicate with the device. Additionally, the Kinetis KW36 MCU exclusively integrates FlexCAN, enabling seamless integration into an automobile's in-vehicle or industrial CAN communication network. The FlexCAN module can support CAN's flexible data rate (CAN FD) for increased bandwidth and lower latency. KINETIS KW36/35/34 WIRELESS MCU FAMILY BLOCK DIAGRAM Core Arm(R) Cortex(R)-M0+ 48 MHz Interrupt Controller Automotive } Car access } Car sharing } Passive entry/passive start (PEPS) systems } Tire pressure measurement sensors (TPMS) systems } Wireless onboard diagnostic functions Industrial } Building control and monitoring } Fire and safety Healthcare } Home and institutional healthcare } Patient monitoring DMA Low-Leakage Wake -Up Unit Single Wire Debug (SWD) DC-DC Converter Micro Trace Buffer Power Management Controller (PMC) Communications 2 x I2C Bit Manipulation Engine (BME) Analog 2 x SPI 16-bit ADC LP-UART/LIN 6-bit ACMP LP-UART/LIN FlexCAN CMT GPIO w/IRQ Capabilities Optional TARGET APPLICATIONS System Internal Watchdog Security AES-128 True Random Number Generator Memories Transceiver Program Flash (512 kB for KW35 or 256 kB for KW36/34) Bluetooth LE 5 and Generic FSK 256 kB FlexNVM 8 kB EEPROM Balun 64 kB SRAM 8 Simultaneous Connections Timers Clocks 3 x Timer w/ PWM Frequency Locked Loop Periodic Interrupt Timers Low / High Frequency Oscillator Low-Power Timers Internal Reference Clocks Independent Real-Time Clock 1 kHz Low-Power Oscillator FEATURES All MCUs in this family contain an integrated buck DC-DC converter that supports operating voltages from 2.13.6 V and significantly reduces the peak current in receive and transmit modes to extend the useful life of a battery. At the same time, this family delivers an excellent link budget that ensures the longest range of communication and a high immunity to interference. This family has up to 512 kB Flash memory with ECC and 64 kB SRAM allowing plenty of space for protocol stacks, application profiles and custom user firmware. In addition, the radio can provide the necessary information in order to accurately estimate the distance (ranging) of a remote Bluetooth LE device to determine its position. For automotive applications, Kinetis KW36A/35A/34A devices are AEC-Q100 Grade 2 qualified and are provided in 6 mm x 6 mm 40HVQFN and 7 mm x 7 mm 48HVQFN packages with "wettable" flank package technology enabling optical inspection of soldering, reducing cost and increasing reliability. ENABLEMENT Take advantage of the robust enablement package that includes the fully certified Bluetooth LE 5 host and controller stacks, Bluetooth LE application profiles in source, generic FSK software protocol, RTOS, development tools and IDEs. These tools are designed for use with Kinetis KW36/35/34 MCUs and are fully integrated in the MCUXpresso software and tools suite. KINETIS KW36/35/34 WIRELESS MCU FAMILYFEATURES AND BENEFITS Features Benefits Supports simultaneous secure connections in any master/slave combination Bluetooth(R) LE 5 with 8 simultaneous connections Keeps all connections alive for continuous monitoring 6.3 mA typical Rx and 5.7 mA Tx current with DC-DC activated Significantly reduces power consumption and extends battery life -95 dBm typical BLE sensitivity High link budget improves range and lowers cost by reducing the need for external power amplifiers -99 dBm typical generic FSK (at 250 kbit/s) sensitivity +5 dBm maximum output power Integrated balun enables smaller design and reduces system costs Excellent selectivity and blocking Significantly improves operation in harsh 2.4 GHz environments 48 MHz Arm Cortex -M0+ core (R) (R) High-performance, low-power core with adequate memory to run Bluetooth LE, generic FSK protocol stacks and application Up to 512 kB flash memory with ECC 64 kB SRAM Fast encryption/decryption utilizing hardware security algorithms for network commissioning and transmissions of supported protocols AES-128 accelerator True random number generator Buck DC-DC converter working from 2.1 V to 3.6 V Supports a wide range of batteries from coin-cell to Lithium-ion 16-bit analog-to-digital converter (ADC) Supports high-performance on-chip analog at the MCU level for sensor aggregation and other sophisticated applications 6-bit high-speed analog comparator (CMP) Enables easy integration into automotive in-vehicle and industrial networks CAN/CAN FD and LIN Bus 7 x 7 mm 48LQFN Smaller size and low component count reduces cost. The wettable flanks package technology enable optical inspection of the soldering, reducing cost and increasing reliability. 6 x 6 mm "wettable" flanks 40HVQFN 7 x 7 mm "wettable" flanks 48HVQFN PART NUMBERS CAN FD 2nd UART with LIN 8kB EEPROM MKW36A512VFP4 MKW36Z512VFP4 MKW35A512VFP4 Part Number Automotive Industrial Automotive Y Y N Y Y N Y Y N 6 x 6 40-pin Wettable HVQFN MKW36A512VHT4 MKW36Z512VHT4 MKW35Z512VHT4 Automotive Industrial Industrial Y Y N Y Y N Y Y N 7X7 48-pin Laminate QFN MKW36A512VFT4 MKW35A512VFT4 Automotive Automotive Automotive Y N N Y N N Y N Y 7 x 7 48-pin Wettable HVQFN MKW34A512VFT4 Qualification Package DEVELOPMENT TOOLS Board Name Description FRDM-KW36 Freedom development board for Kinetis KW36/35 MCUs with 2.4 GHz Bluetooth(R) LE and generic FSK wireless connectivity and CAN/LIN connectivity solutions USB-KW41Z USB dongle for sniffer operations for Kinetis wireless MCUs with 2.4 GHz Bluetooth LE and generic FSK www.nxp.com/Wireless/KinetisKW36 NXP, the NXP logo and Kinetis are trademarks of NXP B.V. All other product or service names are the property of their respective owners. Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the EU and/or elsewhere. All rights reserved. (c) 2017-2019 NXP B.V. Document Number: KINETISKW35FAMFS REV 2