Connecting Sockets, Mounting Brackets, DIN Rails CSM_ConnectionSocket_DS_E_2_1 Durable, Easy-to-handle Connecting Sockets and Mounting Brackets * Highly reliable Track-mounted and Back-connecting Sockets * 61F Controllers and Surge Killer Units can be mounted securely and easily using Mounting Brackets and DIN Rails. Ordering Information Connection Sockets Type Track-mounted Socket Controller Model Back-connecting Socket Model 61F-UHS 8PFA1 Model PL08 61F-HSL 8PFA 61F-APN2 61F-GP-N8@ PF083A-E 61F-G1P@ 61F-G2P@ 61F-IP (-22) 14PFA PL15 61F-GP-N@ 61F-03B 61F-GPN-BT/-BC 61F-04B PF113A-E PL11 Mounting Brackets Model PFC-A1 PHC-5 PLC PFC-N8 (See note.) Note: PFC-N8 Mounting Brackets are included with 61F-GP-N@, 61F-GP-N8@, 61F-GPN-V50, 61F-GPN-BT/-BC, and 61F-APN2 Controllers. DIN Rails Model PFP-100N PFP-50N PFP-100N2 PFP-M PFP-S 1 Track-mounted Sockets PF083A-E Eight, M3.5 x 7 sems screws Terminal Arrangement/ Internal Connections (Top View) Two, 4.2-dia. holes 52 max. Mounting Holes 25 dia. Two, M4 or 4.5-dia. holes 41 max. 21 max. 8PFA Terminal Arrangement/ Internal Connections (Top View) Eight, M3.5 x 7 sems screws Mounting Holes Two M4 or 4.5 dia. holes Two, 4.5 dia. holes 81 max. 118 max. 51 max. 24 max. 8PFA1 Eight, M3.5 x 7 sems screws Terminal Arrangement/ Internal Connections (Top View) Mounting Holes Two M4 or 4.5 dia. holes Two, 4.5 dia. holes 130 max. 93 max. 51 max. 24 max. 14PFA Terminal Arrangement/ Internal Connections (Top View) Fourteen, M3.5 x 7 sems screws Mounting Holes Two 4.5 dia. or M4 mounting holes Two, 4.5 dia. holes 52 max. 118 max. 72 max. 31 max. M3.5 x 11.5 sems screws for terminal screws PF113A-E Terminal Arrangement/ Internal Connections (Top View) Eleven, M3.5 x 5 sems screws Mounting Holes 52 max. Two, M4 or 4.5-dia. holes 31 max. 2 Back-connecting Sockets PL08 Terminal Arrangement/ Mounting Holes Internal Connections Two, 3.5-dia. or M3 Controller (Top View) Unit mounting holes Two, 2-dia. holes 50.5 max. Two, 3.5-dia. or M3 Socket mounting holes 30 dia. 31 dia. hole 35 max. Approx. 20.5 PL11 Terminal Arrangement/ Mounting Holes Internal Connections (Top View) Two, 3.5-dia. or M3 Socket mounting holes Two, 2-dia. holes 31 dia. hole 51 max. 35 max. Approx. 20.5 PL15 16 max. Terminal Arrangement/ Internal Connections (Top View) Mounting Holes Two, 3.5 dia. or M3 Controller Unit mounting holes Two, 3.5-dia. or M3 Socket mounting holes 66 max. 41 max. Two 2-dia. holes 45 max. 22 max. 3 Mounting Brackets When the 61F-G1P/-G2P/-IP/-UHS/-HSL is mounted using a Track-mounted Socket, the Switch is held secure by the hooks on the mounting Socket. 61F-GP-N8, 61F-APN2 To mount to the PF083A-E Track-mounted Socket, use the enclosed PFC-N8 Mounting Bracket. PFC-N8 Approx. 80 4 83 4.5 6 t = 0.3 61F-GP-N, 61F-GPN-BT/-BC To mount to the PF113A-E Track-mounted Socket, use the enclosed PFC-N8 Mounting Brackets. PFC-N8 To mount to the PL11 Back-connecting Socket, use the PHC-5 Mounting Brackets. PHC-5 4.6 6.1 4 7.6 Approx. 80 4 83 73.6 6 4.5 6 2 t = 0.3 61F-03B, -04B To mount to the PF113A-E Track-mounted Socket, use the PFC-A1 Mounting Brackets. PFC-A1 To mount to the PL11 Back-connecting Socket, use the PLC Mounting Brackets. PLC 7.6 4.6 60.8 62 56.6 4.5 6 4 DIN Track Mounting Accessories DIN Track End Plate PFP-100N PFP-50N PFP-M M4 x 8 Round head screw (see note 1) (see note 1) (see note 2) M4 spring washer DIN Track Spacer PFP-100N2 PFP-S (see note 2) Note: 1. The PFP-100N is 15 mm on both ends, while the PFP50N is 15 mm on one end and 5 mm on the other end. 2. Indicates total DIN Track length. 1 m: PFP-100N 50 cm: PFP-50N 1 m: PFP-100N2 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 5 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2010.3 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2010 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: PLC