T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 1 of 6
1N4614UR-1 – 1N4627UR-1e3,
1N4099UR-1 – 1N4135UR-1e3
Availa ble on
commercial
versions
500 mW Metallurgically Bonded
Glass Surfac e Moun t Zener Diodes
Qualified per MIL-PRF-19500/435
Qualified Levels:
JAN, JANTX,
JANTXV and JANS
DESCRIPTION
The 1N4099UR-1 through 1N4135UR-1 and 1N4614UR-1 through 1N4627UR-1 series are
500 mW, Zener voltage regulators in the surface mount, glass DO-213AA package. Voltages
from 1.8 to 100V in 5%, 2%, and 1% tolerances are available. They are constructed with an
internal met allur g ical bo nd and ar e m il-qualified up to the JANS level for high reliability
applications.
DO-213AA
Package
Also available in:
DO-35 package
(axial-leaded)
1N4099-1 – 1N4135-1 and
1N4614-1 – 1N4627-1
DO-216 package
(tabbed surface mount)
1PMT4099 – 1PMT4135 and
1PMT4614 – 1PMT4627
Important: For the latest i nformation, visit our website http://www.microsemi.com.
FEATURES
• Surface mount equivalent to JEDEC registered 1N4099 through 1N4135 and 1N 461 4 thr ough
1N4627 series .
• Interna l meta llurg ic al bond.
• Max noise density 40 μV / √Hz for 6.8 V and up. Falls quickly to 1 μV / √Hz at lower voltages.
• JAN, JANTX, JANTXV and JANS qualifications are available per MIL-PRF-19500/435.
• This series is also available commercially with the CDLL prefix (CDLL4099-1 – CDLL4135-1 and
CDLL4614-1 – CDLL4627-1). This CDLL prefix also replaces the MLL prefix on prior devices.
• RoHS compliant versions available (commercial grade only).
APPLICATIONS / BENEFITS
• Regulates voltage over broad ranges of current and temperature.
• Extensive selection from 1.8 to 100 volts.
• Voltage tolerances of 5% (standard), 2% and 1% are available.
• Hermetically sealed surface mount package.
• Non-sensitive to ESD per MIL-STD-750 method 1020.
• Minimal capacitance (see Figure 3).
• Inherently radiation hard as described in Microsemi MicroNote 050.
MAXIMUM RATINGS @ TC = +25 ºC unless otherwise specified
MSC – Lawrence
6 Lake Street,
Lawrence, MA 01841
Tel: 1-800-446-1158 or
(978) 620-2600
Fax: (978) 689-0803
MSC – Ireland
Gort Road Business Park,
Ennis, Co. Clare, Ireland
Tel: +353 (0) 65 6840044
Fax: +353 (0) 65 6822298
Website:
www.microsemi.com
Parameters/Test Conditions
Symbol
Value
Unit
Junction and Storage Temperature
TJ and TSTG
-65 to +175
oC
Thermal Resi stan ce Jun cti on-to-Ambient (1)
RӨJA
300
oC/W
Thermal Resi stan ce Jun cti on-to-End Cap
RӨJEC
100
oC/W
Rated Average Power Dissipation (2)
PM(AV)
0.5
W
Forward Voltage @ 200 mA
VF
1.1
V
Solder Temperature @ 10 s
260
oC
Notes: 1. When mounted on FR4 PC board (1 oz Cu) with recommended footprint (see last page).
2. The 0.5 W linearly derat es starting at TEC = 125 °C and goes to zero at 175 °C. For ambient TA
conditi on on a typical PC board, it linearly derates from 500 mW starting at 25 °C and goes to zero at
175 °C (see Figure 2).
T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 2 of 6
1N4614UR-1 – 1N4627UR-1e3,
1N4099UR-1 – 1N4135UR-1e3
MECHANICAL and PACKAGING
• CASE: Hermetically sealed glass DO-213AA (SOD80 or CDLL34) MELF style package.
• TERMINALS: Tin-lead or RoHS compliant annealed matte-tin (on commercial grade only) plating. Solderable per MIL-STD-750,
method 2026.
• POLARITY: Cathode indicated by banded end. Diode is to be operated with the banded end positive with respect to the opposite
end for Zener regulation.
• MARKING: Cathode band only .
• TAPE & REEL option: Standard per EIA-481-1-A with 12 mm tape (add “TR” suffix to part number). Consult factory for quantities.
• WEIGHT: Approximately 0.04 grams.
• See Package Dimensions on last page.
PART NOMENCLATURE
JAN 1N4099 C UR -1 (e3)
JAN = JAN level
JANTX = JANTX level
JANTXV = JANTXV level
JANS = JANS level
Blank = Commercial
JEDEC type number
(See Electrical Characteristics
table)
Zener Voltage Tolerance
Blank = 5%
C = 2%
RoHS Compli ance
e3 = RoHS compliant (available
on commerc ial grad e only )
Blank = non-RoHS compliant
Metallurgically Bonded
Surface Mount Package
CDLL 4099 C -1 (e3)
JEDEC type number
(See Electrical Characteristics
table)
Zener Voltage Tolerance
Blank = 5%
C = 2%
D = 1%
RoHS Compli ance
e3 = RoHS compliant Blank =
non-RoHS compliant
Metallurgically Bonded
T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 3 of 6
1N4614UR-1 – 1N4627UR-1e3,
1N4099UR-1 – 1N4135UR-1e3
SYMBOLS & DEFINITIONS
Symbol
Definition
αVZ
Temperature Coefficient of Regulator Voltage: The change in regulator voltage divided by the change in temperature
that caused it expressed in %/C or mV/°C.
I
R
Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature.
IZ, IZT, IZK
Regulator Current: The dc regulator current (IZ), at a specified test point (IZT), near breakdown knee (IZK).
IZM
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
ND
Noise Density: The noise generated over a specified frequency bandwidth usually specified in terms of mV/ √Hz.
VR
Reverse Voltage: The reverse voltage dc value, no alternating component.
VZ
Zener Voltage: The Zener voltage the device will exhibit at a specified current (IZ) in its breakdown region.
ZZT o r ZZK Dyna mic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a
specified rms current modulation (typically 10% of IZT or IZK) and superimpos ed on IZT or IZK respectively.
T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 4 of 6
1N4614UR-1 – 1N4627UR-1e3,
1N4099UR-1 – 1N4135UR-1e3
ELECTRICAL CHARACTERISTICS @ 25
°
C unless otherwise stated
INDUSTRY
PART NUMBER
(Note 1)
MICROSEMI
PART NUMBER
(Note 1)
NOMINAL
ZENER
VOLTAGE
VZ @ IZT
(Note 2)
ZENER
TEST
CURRENT
IZT
MAXIMUM
ZENER
IMPEDANCE
ZZT
(Note 3)
MAXIMUM
REVERSE
CURRENT
IR @ VR
MAXIMUM
NOISE
DENSITY
ND @ IZT
MAXIMUM
ZENER
CURRENT
IZM
MAXIMUM
TEMP.COEFF.
OF ZENE R
VOLTAGE
α
VZ
Volts
µA
Ohms
µA
Volts
µV/√Hz
mA
%/oC
1N4614UR-1
1N4615UR-1
1N4616UR-1
CDLL4614-1
CDLL4615-1
CDLL4616-1
1.8
2.0
2.2
250
250
250
1200
1250
1300
3.5
2.5
2.0
1.0
1.0
1.0
1
1
1
120.0
110.0
100.0
-0.075
-0.075
-0.075
1N4617UR-1
1N4618UR-1
1N4619UR-1
1N4620UR-1
CDLL4617-1
CDLL4618-1
CDLL4619-1
CDLL4620-1
2.4
2.7
3.0
3.3
250
250
250
250
1400
1500
1600
1650
1.0
0.5
0.4
3.5
1.0
1.0
1.0
1.5
1
1
1
1
95.0
90.0
87.0
85.0
-0.075
-0.075
-0.075
-0.075
1N4621UR-1
1N4622UR-1
1N4623UR-1
1N4624UR-1
CDLL4621-1
CDLL4622-1
CDLL4623-1
CDLL4624-1
3.6
3.9
4.3
4.7
250
250
250
250
1700
1650
1600
1550
3.5
2.5
2.0
5.0
2.0
2.0
2.0
3.0
1
1
1
1
83.0
80.0
77.0
75.0
-0.065
-0.060
-0.050
-0.050,+0.020
1N4625UR-1
1N4626UR-1
1N4627UR-1
1N4099UR-1
CDLL4625-1
CDLL4626-1
CDLL4627-1
CDLL4099-1
5.1
5.6
6.2
6.8
250
250
250
250
1500
1400
1200
200
5.0
5.0
5.0
1.0
3.0
4.0
5.0
5.2
2
4
5
40
70.0
65.0
61.0
56.0
-0.045,+0.030
-0.020,+0.040
-0.010,+0.050
+0.060
1N4100UR-1
1N4101UR-1
1N4102UR-1
1N4103UR-1
CDLL4100-1
CDLL4101-1
CDLL4102-1
CDLL4103-1
7.5
8.2
8.7
9.1
250
250
250
250
200
200
200
200
1.0
0.5
0.5
0.5
5.7
6.3
6.7
7.0
40
40
40
40
51.0
46.0
44.0
42.0
+0.065
+0.070
+0.075
+0.080
1N4104UR-1
1N4105UR-1
1N4106UR-1
1N4107UR-1
CDLL4104-1
CDLL4105-1
CDLL4106-1
CDLL4107-1
10.0
11.0
12.0
13.0
250
250
250
250
200
200
200
200
0.5
0.05
0.05
0.05
7.6
8.5
9.2
9.9
40
40
40
40
38.0
35.0
32.0
29.0
+0.080
+0.080
+0.080
+0.080
1N4108UR-1
1N4109UR-1
1N4110UR-1
1N4111UR-1
CDLL4108-1
CDLL4109-1
CDLL4110-1
CDLL4111-1
14.0
15.0
16.0
17.0
250
250
250
250
200
100
100
100
0.05
0.05
0.05
0.05
10.7
11.4
12.2
13.0
40
40
40
40
27.0
25.0
24.0
22.0
+0.085
+0.085
+0.085
+0.090
1N4112UR-1
1N4113UR-1
1N4114UR-1
1N4115UR-1
CDLL4112-1
CDLL4113-1
CDLL4114-1
CDLL4115-1
18.0
19.0
20.0
22.0
250
250
250
250
100
150
150
150
0.05
0.05
0.01
0.01
13.7
14.5
15.2
16.8
40
40
40
40
21.0
20.0
19.0
17.0
+0.090
+0.090
+0.090
+0.090
1N4116UR-1
1N4117UR-1
1N4118UR-1
1N4119UR-1
CDLL4116-1
CDLL4117-1
CDLL4118-1
CDLL4119-1
24.0
25.0
27.0
28.0
250
250
250
250
150
150
150
200
0.01
0.01
0.01
0.01
18.3
19.0
20.5
21.3
40
40
40
40
16.0
15.0
14.0
14.0
+0.090
+0.090
+0.090
+0.095
1N4120UR-1
1N4121UR-1
1N4122UR-1
1N4123UR-1
CDLL4120-1
CDLL4121-1
CDLL4122-1
CDLL4123-1
30.0
33.0
36.0
39.0
250
250
250
250
200
200
200
200
0.01
0.01
0.01
0.01
22.8
25.1
27.4
29.7
40
40
40
40
13.0
12.0
11.0
9.8
+0.095
+0.095
+0.095
+0.095
1N4124UR-1
1N4125UR-1
1N4126UR-1
1N4127UR-1
CDLL4124-1
CDLL4125-1
CDLL4126-1
CDLL4127-1
43.0
47.0
51.0
56.0
250
250
250
250
250
250
300
300
0.01
0.01
0.01
0.01
32.7
35.8
38.8
42.6
40
40
40
40
8.9
8.1
7.5
6.7
+0.095
+0.095
+0.100
+0.100
1N4128UR-1
1N4129UR-1
1N4130UR-1
1N4131UR-1
CDLL4128-1
CDLL4129-1
CDLL4130-1
CDLL4131-1
60.0
62.0
68.0
75.0
250
250
250
250
400
500
700
700
0.01
0.01
0.01
0.01
45.6
47.1
51.7
57.0
40
40
40
40
6.4
6.1
5.6
5.1
+0.100
+0.100
+0.100
+0.100
1N4132UR-1
1N4133UR-1
1N4134UR-1
1N4135UR-1
CDLL4132-1
CDLL4133-1
CDLL4134-1
CDLL4135-1
82.0
87.0
91.0
100.0
250
250
250
250
800
1000
1200
1600
0.01
0.01
0.01
0.01
62.4
66.2
69.2
76.0
40
40
40
40
4.6
4.4
4.2
3.8
+0.100
+0.100
+0.100
+0.100
SEE NOTES ON NEXT PAGE.
T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 5 of 6
1N4614UR-1 – 1N4627UR-1e3,
1N4099UR-1 – 1N4135UR-1e3
NOTE 1: These may be ordered as either 1N4614UR-1 thru 1N4627UR-1 and 1N4099UR-1 thru 1N4135UR-1 or CDLL4614-1 thru CDLL4627-1 and
CDLL4099-1 thru CDLL4135-1. For 1N military types, add the JAN, JANTX, JANTXV prefix for required screeni ng to the industry part
number.
NOTE 2: The JEDEC type numbers shown above have a standard tolerance of +/-5% on the nominal Zener voltage. VZ is measured with t he diode in
thermal equilibri um (sti l l air) at 25 oC for end-cap terminations.
NOTE 3: Zener impedance is derived by superimposing on IZT a 60 Hz rms ac current at 10% of IZT. See MicroNote 202 for ZZT variation with IZ.
GRAPHS
FIGURE 1 – Noise Density Measurement Circuit
Noise density, (ND) is specified in microvolt-rms per square-root-hertz.
Actual measurement is perf ormed using a 1 KHz to 3 KHz frequency
bandpass filter at a constant Zener test current (IZT) at 25 oC ambient
temperature. ND is calculated from the formula.
Zener Voltage VZ
FIGURE 3 – Capacitance vs. Zener Voltage (Typical)
Temperature (oC)
FIGURE 2 – Power Derating Curve
P
d
Rated Power Dissipation (mW)
Typical Capacitance in Picofarads (pF)
T4-LDS-0245, Rev. 2 (5/31/13) ©2013 Microsemi Corporation Page 6 of 6
1N4614UR-1 – 1N4627UR-1e3,
1N4099UR-1 – 1N4135UR-1e3
PACKAGE DIMENSIONS
PAD LAYOUT
DIM
INCH
MILLIMETERS
MIN
MAX
MIN
MAX
BD
0.063
0.067
1.60
1.70
BL
0.130
0.146
3.30
3.71
ECT
0.016
0.022
0.41
0.56
S
0.001 min
0.03 min
INCH
mm
A
0.200
5.08
B
0.055
1.40
C
0.080
2.03