ELECTRO-OPTICAL CHARACTERISTICS TA=25OC (2 HOURS LIGHT ADAPT, MIN)***
MODEL NO.CELL RESISTANCE** (Ohms) SENSITIVITY SPECTRAL PEAK RESPONSE TIME @10 Lux
10 Lux @2856K DARK LOG(R100)-LOG(R10) (nm) RISE TIME (ms) FALL TIME (ms)
MIN (KWW ) MAX (KWW ) MIN (MWW ) SEC (ll TYP) TYP TYP TYP
PDV-P7001 3.6 14.4 0.3 10 0.6 520 50 20
PDV-P7002 420 0.5 10 0.65 520 55 20
PDV-P7003 824 0.5 10 0.7 520 55 20
PDV-P7004 15 60 0.5 10 0.7 520 60 25
PDV-P7005 50 150 20 10 0.85 520 60 25
ABSOLUTE MAXIMUM RATING (TA=25OC unless otherwise noted)
SYMBOL PARAMETER MIN MAX UNITS
VPK Applied Voltage 350 V dc
Pd po/ t Continuous Power Dissipation 400 mW OC
Tstg & ToOperating Temperature Range & Storage -30 +75 OC
TSSoldering Temperature* +260 OC
*.200 inch (5 mm) from bottom of header for 3 secs max with heat sink
FEATURES
Visible light response
Sintered construction
Low cost
High Reliability
Cadmium Sulfoselenide (CdS) Photoconductive Photocells
Type PDV-P700X
APPLICATIONS
Audio equipment
Electronic Toys
Modulation circuits
Volume controls
Information in this technical data sheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications
are subject to change without notice. ** Photocells are light adapted at 100 to 500 Lux. *** Photocells are tested at 2856 oK at a 10 Lux
light level. Resistance values are for reference only. PAGE 1 OF 1 [FORM NO. 100-PDV-P7001 REV N/C]
DESCRIPTION
PDV-P700X are (CdS) photoconductive
photocells designed to sense light from 400
nm to 700 nm. As light dependent resistors,
they are available in a wide range of resis-
tance values. They are packaged in a two
leaded plastic-coated ceramic header.
K Ohms
PHOTONIC
DETECTORS INC.PACKAGE DIMENSIONS INCH [mm]
1. PHOTOCELL "GRID" PATTERN CAN VARY, PDI RESERVES THE RIGHT TO CHANGE
AND MIX GRID PATTERNS.
2. DIMENSION CONTROLLED AT BASE OF CERAMIC HEADER PACKAGE.
LOG (E100)-LOG(E10)
PLASTIC COATED CERAMIC PACKAGE
CELL RESISTANCE VS. ILLUMINANCE
Lux
INDUSTRY EQUIVALENTS
VT800 & NSL-4000 &5000 series
.079 [2.00]
-.010 [0.25]
+.015 [0.38]
COATED
PLASTIC
EPOXY ON LEADS 3mm MAX
1
.200 [5.08]2
2X Ø.016 [0.40]
1.437 [36.5] MIN
.249 [6.31]
±.010 [0.25]
Ø.263 [7.20]
±.010 [0.25]
