E2E/E2E2 Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor
E2E/E2E2
A New Series of Easy-to-use
and Tough E2E/E2E2 Models
Long-size E2E2 Proximity Sen-
sor Conforms to CENELEC
• Ideal for a variety of applications.
• With a metal connector that can be tightened
securely and a cable protector.
• With an easy-to-see indicator, deeper mounting
holes, and tightening flats for wrenches.
• New 3-dia. size (sensing distance: 0.6 mm) added to
the lineup.
<READ AND UNDERSTAND THIS CATALOG>
Please read and understand this catalog before purchasing
the products. Please consult your OMRON representative if
you have any questions or comments.
Ordering Information
E2E
DC 2-wire/Pre-wired Models
Note 1. In addition to the above models, E2E-X@@15 models (e.g., E2E-X3D15-N), which are different in frequency from the above models, are
available.
2. E2E models with a robotics cable are available as well. The model number of a model with a robotics cable has the suffix “-R”
(e.g., E2E-X3D1-R).
3. Cables with a length of 5 m are also available. Specify the cable length at the end of the model number (e.g., E2E-X3D1-N 5M).
Self-diagnostic
output function
Size Sensing distance Model
NO NC
Yes Shielded M12 3 mm E2E-X3D1S (See note 1.) ---
M18 7 mm E2E-X7D1S (See note 1.) ---
M30 10 mm E2E-X10D1S (See note 1.) ---
Unshielded M12 8 mm E2E-X8MD1S (See note 1.) ---
M18 14 mm E2E-X14MD1S (See note 1.) ---
M30 20 mm E2E-X20MD1S (See note 1.) ---
No Shielded M8 2 mm E2E-X2D1-N (See notes 2 and 3.) E2E-X2D2-N (See note 3.)
M12 3 mm E2E-X3D1-N (See notes 1, 2 and 3.) E2E-X3D2-N (See note 3.)
M18 7 mm E2E-X7D1-N (See notes 1, 2 and 3.) E2E-X7D2-N (See note 3.)
M30 10 mm E2E-X10D1-N (See notes 1, 2 and 3.) E2E-X10D2-N
Unshielded M8 4 mm E2E-X4MD1 (See notes 2 and 3.) E2E-X4MD2
M12 8 mm E2E-X8MD1 (See notes 1, 2 and 3.) E2E-X8MD2
M18 14 mm E2E-X14MD1 (See notes 1, 2 and 3.) E2E-X14MD2
M30 20 mm E2E-X20MD1 (See notes 1, 2 and 3. E2E-X20MD2
2E2E/E2E2 Cylindrical Proximity Sensor
DC 2-wire/Connector Models
Note: In addition to the above models, E2E-X@D15-M1G models (e.g., E2E-X3D15-M1G), which are different in frequency from the above models,
are available.
DC 2-wire/Pre-wired Connector Models
Note 1. A model with no polarity has a residual voltage of 5 V, which must be taken into consideration together with the interface condition (the
PLC’s ON voltage, for example) when connecting the Proximity Sensor to a load.
2. The standard cable length is 300 mm. Models are also available with 500 mm and 1 m cables.
Connector Pin Assignments of DC 2-wire Model
The connector pin assignments of each new E2E DC 2-wire conforms to IEC947-5-2 Table III.
The following E2E models with conventional connector pin assignments are available as well.
Connector Self-diagnostic
output function
Size Sensing
distance
Model
NO NC
M12 Yes Shielded M12 3 mm E2E-X3D1S-M1 ---
M18 7 mm E2E-X7D1S-M1 ---
M30 10 mm E2E-X10D1S-M1 ---
Unshielded M12 8 mm E2E-X8MD1S-M1 ---
M18 14 mm E2E-X14MD1S-M1 ---
M30 20 mm E2E-X20MD1S-M1 ---
No Shielded M8 2 mm E2E-X2D1-M1G E2E-X2D2-M1G
M12 3 mm E2E-X3D1-M1G (See note.) E2E-X3D2-M1G
M18 7 mm E2E-X7D1-M1G (See note.) E2E-X7D2-M1G
M30 10 mm E2E-X10D1-M1G (See note.) E2E-X10D2-M1G
Unshielded M8 4 mm E2E-X4MD1-M1G E2E-X4MD2-M1G
M12 8 mm E2E-X8MD1-M1G (See note.) E2E-X8MD2-M1G
M18 14 mm E2E-X14MD1-M1G (See note.) E2E-X14MD2-M1G
M30 20 mm E2E-X20MD1-M1G (See note.) E2E-X20MD2-M1G
M8 Shielded M8 2 mm E2E-X2D1-M3G E2E-X2D2-M3G
Unshielded 4 mm E2E-X4MD1-M3G E2E-X4MD2-M3G
Size Sensing distance Operation mode Polarity Model
Shielded M12 3 mm NO Yes E2E-X3D1-M1GJ
No E2E-X3D1-M1J-T
M18 7 mm Yes E2E-X7D1-M1GJ
No E2E-X7D1-M1J-T
M30 10 mm Yes E2E-X10D1-M1GJ
No E2E-X10D1-M1J-T
Unshielded M12 8 mm Yes E2E-X8MD1-M1GJ
M18 14 mm E2E-X14MD1-M1GJ
M30 20 mm E2E-X20MD1-M1GJ
Size Operation mode Model Size Operation mode Model
Shielded M8 NO E2E-X2D1-M1 Unshielded M8 NO E2E-X4MD1-M1
NC E2E-X2D2-M1 NC E2E-X4MD2-M1
M12 NO E2E-X3D1-M1 M12 NO E2E-X8MD1-M1
NC E2E-X3D2-M1 NC E2E-X8MD2-M1
M18 NO E2E-X7D1-M1 M18 NO E2E-X14MD1-M1
NC E2E-X7D2-M1 NC E2E-X14MD2-M1
M30 NO E2E-X10D1-M1 M30 NO E2E-X20MD1-M1
NC E2E-X10D2-M1 NC E2E-X20MD2-M1
E2E/E2E2 Cylindrical Proximity Sensor 3
DC 3-wire/Pre-wired Models
Note 1. Cables with a length of 5 m are also available. Specify the
cable length at the end of the model number (e.g., E2E-X2E1
5M).
2. Models with a robotics cable are also available. These
models are E2E-X@E1-R (e.g., E2E-X5E1-R).
3. Models with a different frequency are also available. These
models are E2E-X@E@5 (e.g., E2E-X5E15).
4. These models have e-CON connectors (0.3 m cable length),
which is indicated by the suffix “-ECON” (e.g., E2E-X2E1-
ECON).
AC 2-wire/Pre-wired Models
Note 1. Models with a different frequency are also available. These
models are E2E-X@Y@5 (e.g., E2E-X5Y15).
2. Cables with a length of 5 m are also available. Specify the
cable length at the end of the model number (e.g., E2E-X2Y1
5M).
Size Sensing
distance
Output
configuration
Model
Shielded 3 dia. 0.6 mm NPN NO E2E-CR6C1
NPN NC E2E-CR6C2
PNP NO E2E-CR6B1
PNP NC E2E-CR6B2
4 dia. 0.8 mm NPN NO E2E-CR8C1
(See notes 1 and 2.)
NPN NC E2E-CR8C2
PNP NO E2E-CR8B1
PNP NC E2E-CR8B2
M5 1 mm NPN NO E2E-X1C1
(See notes 1 and 2.)
NPN NC E2E-X1C2
PNP NO E2E-X1B1
PNP NC E2E-X1B2
5.4
dia.
1 mm NPN NO E2E-C1C1
(See notes 1 and 2.)
NPN NC E2E-C1C2
PNP NO E2E-C1B1
PNP NC E2E-C1B2
M8 1.5 mm NPN NO E2E-X1R5E1
(See notes 1 and 2.)
NPN NC E2E-X1R5E2
PNP NO E2E-X1R5F1
PNP NC E2E-X1R5F2
M12 2 mm NPN NO E2E-X2E1 (See notes 1,
2, 3, and 4.)
NPN NC E2E-X2E2
(See notes 3 and 4.)
PNP NO E2E-X2F1
PNP NC E2E-X2F2
M18 5 mm NPN NO E2E-X5E1 (See notes 1,
2, 3, and 4.)
NPN NC E2E-X5E2
(See notes 3 and 4.)
PNP NO E2E-X5F1
PNP NC E2E-X5F2
M30 10 mm NPN NO E2E-X10E1 (See notes
1, 2, 3, and 4.)
NPN NC E2E-X10E2
(See notes 3 and 4.)
PNP NO E2E-X10F1
PNP NC E2E-X10F2
Un-
shielded
M8 2 mm NPN NO E2E-X2ME1
(See note 2.)
NPN NC E2E-X2ME2
PNP NO E2E-X2MF1
PNP NC E2E-X2MF2
M12 5 mm NPN NO E2E-X5ME1 (See notes
1, 2, 3, and 4.)
NPN NC E2E-X5ME2 (See notes
3 and 4.)
PNP NO E2E-X5MF1
PNP NC E2E-X5MF2
M18 10 mm NPN NO E2E-X10ME1 (See notes
1, 2, 3, and 4.)
NPN NC E2E-X10ME2
(See notes 3 and 4.)
PNP NO E2E-X10MF1
PNP NC E2E-X10MF2
M30 18 mm NPN NO E2E-X18ME1 (See notes
1, 2, 3, and 4.)
NPN NC E2E-X18ME2
(See notes 3 and 4.)
PNP NO E2E-X18MF1
PNP NC E2E-X18MF2
Size Sensing
distance
Operation
mode
Model
Shielded M8 1.5 mm NO E2E-X1R5Y1
NC E2E-X1R5Y2
M12 2 mm NO E2E-X2Y1
(See notes 1 and 2.)
NC E2E-X2Y2
M18 5 mm NO E2E-X5Y1
(See notes 1 and 2.)
NC E2E-X5Y2
M30 10 mm NO E2E-X10Y1
(See notes 1 and 2.)
NC E2E-X10Y2
Un-
shielded
M8 2 mm NO E2E-X2MY1
NC E2E-X2MY2
M12 5 mm NO E2E-X5MY1
(See notes 1 and 2.)
NC E2E-X5MY2
M18 10 mm NO E2E-X10MY1
(See note 1.)
NC E2E-X10MY2
M30 18 mm NO E2E-X18MY1
(See note 1.)
NC E2E-X18MY2
Size Sensing
distance
Output
configuration
Model
4E2E/E2E2 Cylindrical Proximity Sensor
DC 3-wire/Connector Models AC 2-wire/Connector Models
AC/DC 2-wire/Pre-wired Models
Note 1. These models do not conform to CE standards.
2. Cables with a length of 5 m are also available as standard
models. Specify the cable length at the end of the model
number (e.g., E2E-X7T1 5M).
Connector Size Sensing
distance
Output
configuration
Model
M12 Shielded M8 1.5 mm NPN NO E2E-X1R5E1-M1
NPN NC E2E-X1R5E2-M1
PNP NO E2E-X1R5F1-M1
PNP NC E2E-X1R5F2-M1
M12 2 mm NPN NO E2E-X2E1-M1
NPN NC E2E-X2E2-M1
PNP NO E2E-X2F1-M1
PNP NC E2E-X2F2-M1
M18 5 mm NPN NO E2E-X5E1-M1
NPN NC E2E-X5E2-M1
PNP NO E2E-X5F1-M1
PNP NC E2E-X5F2-M1
M30 10 mm NPN NO E2E-X10E1-M1
NPN NC E2E-X10E2-M1
PNP NO E2E-X10F1-M1
PNP NC E2E-X10F2-M1
Un-
shielded
M8 2 mm NPN NO E2E-X2ME1-M1
NPN NC E2E-X2ME2-M1
PNP NO E2E-X2MF1-M1
PNP NC E2E-X2MF2-M1
M12 5 mm NPN NO E2E-X5ME1-M1
NPN NC E2E-X5ME2-M1
PNP NO E2E-X5MF1-M1
PNP NC E2E-X5MF2-M1
M18 10 mm NPN NO E2E-X10ME1-M1
NPN NC E2E-X10ME2-M1
PNP NO E2E-X10MF1-M1
PNP NC E2E-X10MF2-M1
M30 18 mm NPN NO E2E-X18ME1-M1
NPN NC E2E-X18ME2-M1
PNP NO E2E-X18MF1-M1
PNP NC E2E-X18MF2-M1
M8-3 pin Shielded 4 dia. 0.8 mm NPN NO E2E-CR8C1-M5
NPN NC E2E-CR8C2-M5
PNP NO E2E-CR8B1-M5
PNP NC E2E-CR8B2-M5
M5 1 mm NPN NO E2E-X1C1-M5
NPN NC E2E-X1C2-M5
PNP NO E2E-X1B1-M5
PNP NC E2E-X1B2-M5
M8 Shielded M8 1.5 mm NPN NO E2E-X1R5E1-M3
NPN NC E2E-X1R5E2-M3
PNP NO E2E-X1R5F1-M3
PNP NC E2E-X1R5F2-M3
Un-
shielded
M8 2 mm NPN NO E2E-X2ME1-M3
NPN NC E2E-X2ME2-M3
PNP NO E2E-X2MF1-M3
PNP NC E2E-X2MF2-M3
Size Sensing
distance
Operation
mode
Model
Shielded M12 2 mm NO E2E-X2Y1-M1
NC E2E-X2Y2-M1
M18 5 mm NO E2E-X5Y1-M1
NC E2E-X5Y2-M1
M30 10 mm NO E2E-X10Y1-M1
NC E2E-X10Y2-M1
Un-
shielded
M12 5 mm NO E2E-X5MY1-M1
NC E2E-X5MY2-M1
M18 10 mm NO E2E-X10MY1-M1
NC E2E-X10MY2-M1
M30 18 mm NO E2E-X18MY1-M1
NC E2E-X18MY2-M1
Size Sensing
distance
Operation
mode
Model
Shielded M12 3 mm NO E2E-X3T1
M18 7 mm E2E-X7T1
(See note 2.)
M30 10 mm E2E-X10T1
E2E/E2E2 Cylindrical Proximity Sensor 5
E2E2
DC 2-wire/Pre-wired Models
Note: In addition to the above models, E2E-X@D15 models (e.g., E2E-X3D15), which are different in frequency from the above models, are
available.
DC 3-wire/Pre-wired Models
Size Sensing distance Operation mode Model
Shielded M12 3 mm NO (See note.) E2E2-X3D1
NC E2E2-X3D2
M18 7 mm NO (See note.) E2E2-X7D1
NC E2E2-X7D2
M30 10 mm NO (See note.) E2E2-X10D1
NC E2E2-X10D2
Unshielded M12 8 mm NO (See note.) E2E2-X8MD1
NC E2E2-X8MD2
M18 14 mm NO (See note.) E2E2-X14MD1
NC E2E2-X14MD2
M30 20 mm NO (See note.) E2E2-X20MD1
NC E2E2-X20MD2
Size Sensing distance Output configuration Model
Shielded M12 2 mm NPN NO E2E2-X2C1
NPN NC E2E2-X2C2
PNP NO E2E2-X2B1
PNP NC E2E2-X2B2
M18 5 mm NPN NO E2E2-X5C1
NPN NC E2E2-X5C2
PNP NO E2E2-X5B1
PNP NC E2E2-X5B2
M30 10 mm NPN NO E2E2-X10C1
NPN NC E2E2-X10C2
PNP NO E2E2-X10B1
PNP NC E2E2-X10B2
Unshielded M12 5 mm NPN NO E2E2-X5MC1
NPN NC E2E2-X5MC2
PNP NO E2E2-X5MB1
PNP NC E2E2-X5MB2
M18 10 mm NPN NO E2E2-X10MC1
NPN NC E2E2-X10MC2
PNP NO E2E2-X10MB1
PNP NC E2E2-X10MB2
M30 18 mm NPN NO E2E2-X18MC1
NPN NC E2E2-X18MC2
PNP NO E2E2-X18MB1
PNP NC E2E2-X18MB2
6E2E/E2E2 Cylindrical Proximity Sensor
DC 3-wire/Connector Models
AC 2-wire/Pre-wired Models
Size Sensing distance Output configuration Model
Shielded M12 2 mm NPN NO E2E2-X2C1-M1
NPN NC E2E2-X2C2-M1
PNP NO E2E2-X2B1-M1
PNP NC E2E2-X2B2-M1
M18 5 mm NPN NO E2E2-X5C1-M1
NPN NC E2E2-X5C2-M1
PNP NO E2E2-X5B1-M1
PNP NC E2E2-X5B2-M1
M30 10 mm NPN NO E2E2-X10C1-M1
NPN NC E2E2-X10C2-M1
PNP NO E2E2-X10B1-M1
PNP NC E2E2-X10B2-M1
Unshielded M12 5 mm NPN NO E2E2-X5MC1-M1
NPN NC E2E2-X5MC2-M1
PNP NO E2E2-X5MB1-M1
PNP NC E2E2-X5MB2-M1
M18 10 mm NPN NO E2E2-X10MC1-M1
NPN NC E2E2-X10MC2-M1
PNP NO E2E2-X10MB1-M1
PNP NC E2E2-X10MB2-M1
M30 18 mm NPN NO E2E2-X18MC1-M1
NPN NC E2E2-X18MC2-M1
PNP NO E2E2-X18MB1-M1
PNP NC E2E2-X18MB2-M1
Size Sensing distance Operation mode Model
Shielded M12 2 mm NO E2E2-X2Y1
NC E2E2-X2Y2
M18 5 mm NO E2E2-X5Y1
NC E2E2-X5Y2
M30 10 mm NO E2E2-X10Y1
NC E2E2-X10Y2
Unshielded M12 5 mm NO E2E2-X5MY1
NC E2E2-X5MY2
M18 10 mm NO E2E2-X10MY1
NC E2E2-X10MY2
M30 18 mm NO E2E2-X18MY1
NC E2E2-X18MY2
E2E/E2E2 Cylindrical Proximity Sensor 7
AC 2-wire/Connector Models
Size Sensing distance Operation mode Model
Shielded M12 2 mm NO E2E2-X2Y1-M4
NC E2E2-X2Y2-M4
M18 5 mm NO E2E2-X5Y1-M4
NC E2E2-X5Y2-M4
M30 10 mm NO E2E2-X10Y1-M4
NC E2E2-X10Y2-M4
Unshielded M12 5 mm NO E2E2-X5MY1-M4
NC E2E2-X5MY2-M4
M18 10 mm NO E2E2-X10MY1-M4
NC E2E2-X10MY2-M4
M30 18 mm NO E2E2-X18MY1-M4
NC E2E2-X18MY2-M4
8E2E/E2E2 Cylindrical Proximity Sensor
Specifications
■Ratings/Characteristics
E2E
E2E-X@D@ DC 2-wire Models
Note 1. Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 models).
2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
3. The residual voltage of each E2E model with the model number suffix “-M1J-T” is 5 V. When connecting an E2E model with the suffix “-
M1J-T” to a device, make sure that the device can withstand the residual voltage.
4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size M8 M12 M18 M30
Type Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded
Item E2E-X2D@E2E-X4MD@E2E-X3D@E2E-X8MD@E2E-X7D@E2E-X14MD@E2E-X10D@E2E-X20MD@
Sensing distance 2 mm ±10% 4 mm ±10% 3 mm ±10% 8 mm ±10% 7 mm ±10% 14 mm ±10% 10 mm ±10% 20 mm ±10%
Set distance (See note 1.) 0 to 1.6 mm 0 to 3.2 mm 0 to 2.4 mm 0 to 6.4 mm 0 to 5.6 mm 0 to 11.2 mm 0 to 8.0 mm 0 to 16.0 mm
Differential travel 15% max. of sensing distance 10% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron, 8 x 8 x
1mm
Iron, 20 x 20 x
1mm
Iron,12 x 12 x
1mm
Iron,30 x 30 x
1mm
Iron, 18 x 18 x
1mm
Iron, 30 x 30 x
1mm
Iron,30 x 30 x
1mm
Iron, 54 x 54 x
1mm
Response speed (See
note 2.)
1.5 kHz 1.0 kHz 1.0 kHz 0.8 kHz 0.5 kHz 0.4 kHz 0.4 kHz 0.1 kHz
Power supply voltage
(operating voltage range)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current 0.8 mA max.
Control
output
Load
current
3 to 100 mA
Diagnostic output: 50 mA for -D1(5)S models
Residual
voltage
(See note 3.)
3 V max. (Load current: 100 mA, Cable length: 2 m. M1J-T models only: 5 V max.)
Indicator D1 Models: Operation indicator (red LED), setting indicator (green LED)
D2 Models: Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
D1 Models: NO
D2 Models: NC
For details, refer to Timing Charts.
Diagnostic output delay 0.3 to 1 s
Protection circuits Surge suppressor, output load short-circuit protection (for control and diagnostic output)
Ambient temperature Operating: –25°C to 70°C, Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±15% max. of sensing
distance at 23°C in the
temperature range of –25°C to
70°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 500 m/s2 10 times each in X,
Y, and Z directions
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67 (Pre-wired models, pre-wired connector models: in-house standard for oil resistance (former JEM standard
equivalent to IP67g)) (See note 4.)
Connection method Pre-wired models (standard length: 2 m), connector models, pre-wired connector models (standard length: 0.3 m)
Weight
(packed
state)
Pre-wired
models
Approx. 60 g Approx. 70 g Approx. 130 g Approx. 175 g
Pre-wired
connector
models
--- Approx. 40 g Approx. 70 g Approx. 110 g
Connector
models
Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g
Material Case Stainless steel (SUS303) Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories Instruction manual
E2E/E2E2 Cylindrical Proximity Sensor 9
E2E-X@E@/F@ DC 3-wire Models
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. When using an E2E with an M8 connector at an ambient temperature range between 70°C and 85°C, supply 10 to 30 VDC to the E2E and
make sure that the E2E has a control output of 100 mA maximum.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size M8 M12 M18 M30
Type Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded
Item E2E-X1R5E@/
F@
E2E-X2ME@/
F@
E2E-X2E@/
F@
E2E-X5ME@/
F@
E2E-X5E@/
F@
E2E-X10ME@/
F@E2E-X10E@/
F@
E2E-X18ME@/
F@
Sensing distance 1.5 mm ±10% 2 mm ±10% 2 mm ±10% 5 mm ±10% 5 mm ±10% 10 mm ±10% 10 mm ±10% 18 mm ±10%
Set distance 0 to 1.2 mm 0 to 1.6 mm 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm
Differential travel 10% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 8 x 8 x
1mm
Iron, 12 x 12 x
1mm
Iron, 12 x 12 x
1mm
Iron, 15 x 15 x
1mm
Iron, 18 x 18 x
1mm
Iron, 30 x 30 x
1mm
Iron, 30 x 30 x
1mm
Iron, 54 x 54 x
1mm
Response speed (See
note 1.)
2.0 kHz 0.8 kHz 1.5 kHz 0.4 kHz 0.6 kHz 0.2 kHz 0.4 kHz 0.1 kHz
Power supply voltage
(operating voltage
range) (See note 2.)
12 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max.
Current consumption 13 mA max.
Control
output
Load current
(See note 2.)
200 mA max.
Residual
voltage
2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicator Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
E1 F1 Models: NO
E2 F2 Models: NC
For details, refer to Timing Charts.
Protection circuits Power supply reverse polarity protection, surge suppressor, output load short-circuit protection
Ambient temperature
(See note 2)
Operating/Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no icing)
Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 500 m/s2 10 t imes ea ch in X, Y,
and Z directions
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note
3.)
Connection method Pre-wired models (standard length 2 m), connector models
Weight
(packed
state)
Pre-wired
models
Approx. 65 g Approx. 75 g Approx. 150 g Approx. 195 g
Connector
models
Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g
Material Case Stainless steel (SUS303) Brass-nickel plated
Sensing
surface PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories Instruction manual
10 E2E/E2E2 Cylindrical Proximity Sensor
E2E-C@C@/B@, E2E-X1C@/B@ DC 3-wire Models
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size 3 dia. 4 dia. M5 5.4 dia.
Type Shielded
Item E2E-CR6C@/B@E2E-CR8C@/B@E2E-X1C@/B@E2E-C1C@/B@
Sensing distance 0.6 mm ±15% 0.8 mm ±15% 1 mm ±15%
Set distance 0 to 0.4 mm 0 to 0.5 mm 0 to 0.7 mm
Differential travel 15% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron: 3 x 3 x 1 mm Iron: 5 x 5 x 1 mm
Response speed (See note.) 2 kHz 3 kHz
Power supply voltage
(operating voltage range)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption 10 mA max. 17 mA max.
Control output Load current Open-collector output
80 mA max. (at 30 VDC
max.)
Open-collector output 100 mA max. (at 30 VDC max.)
Residual
voltage
1 V max. (Load current:
80 mA, Cable length:
2m)
2 V max. (Load current: 100 mA, Cable length: 2 m)
Indicator Operation indicator (red LED)
Operation mode (with sensing object
approaching)
C1/-B1 Models:NO
C2/-B2 Models:NC
For details, refer to Timing Charts.
Protection circuits Power supply reverse polarity protection, surge suppressor
Ambient temperature Operating/Storage: –25°C to 70°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95%
Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±5% max. of sensing
distance in the rated
voltage range ±10%
±2.5% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 500 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 500 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP66 IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former
JEM standard equivalent to IP67g)) (See note 2.)
Connection method Pre-wired models
(Standard length 2 m)
Pre-wired models (Standard length 2 m), connector models
Weight
(packed state)
Pre-wired
models
Approx. 60 g
Connector
models
--- Approx. 12 g Approx. 15 g ---
Material Case Stainless steel (SUS303) Brass-nickel plated
Sensing surface Heat-resistant ABS
Clamping nuts --- Brass-nickel plated
Toothed washer --- Iron-zinc plated
Accessories Instruction manual
E2E/E2E2 Cylindrical Proximity Sensor 11
E2E-X@Y@ AC 2-wire Models
Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is over –25°C.
2. When using an M18-or M30-sized E2E within an ambient temperature of 70°C to 85°C, make sure that the E2E has a control output of 5
to 200 mA max.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size M8 M12 M18 M30
Type Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded
Item E2E-X1R5Y@E2E-X2MY@E2E-X2Y@E2E-X5MY@E2E-X5Y@E2E-X10MY@E2E-X10Y@E2E-X18MY@
Sensing distance 1.5 mm ±10% 2 mm ±10% 2 mm ±10% 5 mm ±10% 5 mm ±10% 10 mm ±10% 10 mm ±10% 18 mm ±10%
Set distance 0 to 1.2 mm 0 to 1.6 mm 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm
Differential travel 10% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 8 x 8 x
1mm
Iron,12 x 12 x
1mm
Iron, 12 x 12 x
1mm
Iron, 15 x 15 x
1mm
Iron, 18 x 18 x
1mm
Iron, 30 x 30 x
1mm
Iron, 30 x 30 x
1mm
Iron, 54 x 54 x
1mm
Response speed 25 Hz
Power supply
voltage (operating
voltage range)
(See note 1.)
24 to 240 VAC, 50/60 Hz (20 to 264 VAC)
Leakage current 1.7 mA max.
Control
output
Load
current
(See note
2.)
5 to 100 mA 5 to 200 mA 5 to 300 mA
Residual
voltage
Refer to Engineering Data.
Indicator Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
Y1 Models: NO
Y2 Models: NC
For details, refer to Timing Charts.
Protection circuit Surge suppressor
Ambient temperature
(See notes 1 and 2.)
Operating/Storage: –25°C to
70°C (with no icing or
condensation)
Operating/Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature
influence
±10% max. of sensing
distance at 23°C in the
temperature range of –25°C
to 70°C
±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case (2,000 VAC for M8 Models)
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 500 m/s2 10 times each in X,
Y, and Z directions
1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See
note 3.)
Connection method Pre-wired models (standard length 2 m), connector models
Weight
(packed
state)
Pre-wired
models
Approx. 60 g Approx. 70 g Approx. 130 g Approx. 175 g
Connector
models
Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g
Material Case Stainless steel (SUS303) Brass-nickel plated
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories Instruction manual
12 E2E/E2E2 Cylindrical Proximity Sensor
AC/DC 2-wire Models
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. Power supply voltage waveform: Use a sine wave for the power supply. Using a rectangular AC power supply may result in faulty reset.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size M12 M18 M30
Type Shielded
Item E2E-X3T1 E2E-X7T1 E2E-X10T1
Sensing distance 3 mm ±10% 7 mm ±10% 10 mm ±10%
Set distance 0 to 2.4 mm 0 to 5.6 mm 0 to 8.0 mm
Differential travel 10% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron, 12 x 12 x 1 mm Iron, 18 x 18 x 1 mm Iron, 30 x 30 x 1 mm
Response speed
(See note 1.)
DC 1.0 kHz 0.5 kHz 0.4 kHz
AC 25 Hz
Power supply voltage
(operating voltage range) (See note 2.)
24 to 240 VDC (20 to 264 VDC)/48 to 240 VAC (40 to 264 VAC)
Leakage current 1 mA DC max., 2 mA AC max.
Control output Load current 5 to 100 mA
Residual
voltage
6.0 VDC max. (Load current: 100 mA, Cable length: 2 m)
10 VAC max. (Load current: 5 mA, Cable length: 2 m)
Indicator Operation indicator (red LED), setting indicator (green LED)
Operation mode
(with sensing object approaching)
NO
For details, refer to Timing Charts.
Protection circuits Output load short-circuit protection (at 20 to 40 VDC), Surge suppressor
Ambient temperature Operating: –25°C to 70°C, Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method Pre-wired Models (standard length 2 m)
Weight (packed state) Approx. 80 g Approx. 140 g Approx. 190 g
Material Case Brass-nickel plated
Sensing surface PBT (polybutylene terephthalate)
Clamping nuts Brass-nickel plated
Toothed washer Iron-zinc plated
Accessories Instruction manual
E2E/E2E2 Cylindrical Proximity Sensor 13
E2E2
E2E2-X@D@ DC 2-wire Models
Note 1. Use the E2E2 within the range in which the setting indicator (green LED) is lit (except D2 models).
2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size M12 M18 M30
Type Shielded Unshielded Shielded Unshielded Shielded Unshielded
Item E2E2-X3D@E2E2-X8MD@E2E2-X7D@E2E2-X14MD@E2E2-X10D@E2E2-X20MD@
Sensing distance 3 mm ±10% 8 mm ±10% 7 mm ±10% 14 mm ±10% 10 mm ±10% 20 mm ±10%
Set distance
(See note 1.)
0 to 2.4 mm 0 to 6.4 mm 0 to 5.6 mm 0 to 11.2 mm 0 to 8.0 mm 0 to 16.0 mm
Differential travel 10% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 12 x 12 x
1mm
Iron, 30 x 30 x
1mm
Iron, 18 x 18 x
1mm
Iron, 30 x 30 x
1mm
Iron, 30 x 30 x
1mm
Iron, 54 x 54 x
1mm
Response speed (See
note 2.)
1.0 kHz 0.8 kHz 0.5 kHz 0.4 kHz 0.4 kHz 0.1 kHz
Power supply voltage
(operating voltage
range)
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current 0.8 mA max.
Control
output
Load
current
3 to 100 mA
Residual
voltage
3.0 V max. (Load current: 100 mA, Cable length: 2 m)
Indicator D1 Models: Operation indicator (red LED), setting indicator (green LED)
D2 Models: Operation indicator (red LED)
Operation mode
(with sensing object
approaching)
D1 Models: NO
D2 Models: NC
For details, refer to Timing charts.
Protection circuits Surge suppressor, output load short-circuit protection
Ambient temperature Operating/Storage: –25°C to 70°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method Pre-wired models (standard length 2 m)
Weight (packed state) Approx. 65 g Approx. 150 g Approx. 210 g
Material Case Brass
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories Instruction manual
14 E2E/E2E2 Cylindrical Proximity Sensor
E2E2-X@C@/B@ DC 3-wire Models
Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard
sensing object, and a set distance of half the sensing distance.
2. An unsmoothed full-wave rectification power supply of 24 VDC ±20% (average value) can be used.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size M12 M18 M30
Type Shielded Unshielded Shielded Unshielded Shielded Unshielded
Item E2E2-X2C@/
B@
E2E2-X5MC@/B@E2E2-X5C@/
B@
E2E2-X10MC@/
B@
E2E2-X10C@/
B@
E2E2-X18MC@/
B@
Sensing distance 2 mm ±10% 5 mm ±10% 5 mm ±10% 10 mm ±10% 10 mm ±10% 18 mm ±10%
Set distance 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm
Differential travel 10% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing
object
Iron, 12 x 12 x
1mm
Iron, 15 x 15 x
1mm
Iron, 18 x 18 x
1mm
Iron, 30 x 30 x
1mm
Iron, 30 x 30 x
1mm
Iron, 54 x 54 x
1mm
Response speed (See
note 1.)
1.5 kHz 0.4 kHz 0.6 kHz 0.2 kHz 0.4 kHz 0.1 kHz
Power supply voltage
(operating voltage
range) (See note.)
12 to 24 VDC (10 to 55 VDC), ripple (p-p): 10% max.
Current consumption 13 mA max.
Control
output
Load
current
200 mA max., open collector (55 VDC max.)
Residual
voltage
2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicator Operation indicator (red LED)
Operation mode (with
sensing object
approaching)
B1/C1 Models: NO
B2/C2 Models: NC
For details, refer to Timing Charts.
Protection circuits Surge suppressor, output load short-circuit protection, power supply reverse polarity protection
Ambient temperature Operating/Storage: –40°C to 85°C (with no icing or condensation)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method Pre-wired models (standard length: 2 m)
Weight (packed state) Approx. 75 g Approx. 160 g Approx. 220 g
Material Case Brass
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories Instruction manual
E2E/E2E2 Cylindrical Proximity Sensor 15
E2E2-X@Y@ AC 2-wire Models
Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is –25°C to 85°C.
2. When using an M18-or M30-sized E2E2 within an ambient temperature of 70°C to 85°C, make sure that the E2E2 has a control output of
5 to 200 mA maximum.
3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard.
Size M12 M18 M30
Type Shielded Unshielded Shielded Unshielded Shielded Unshielded
Item E2E2-X2Y@E2E2-X5MY@E2E2-X5Y@E2E2-X10MY@E2E2-X10Y@E2E2-X18MY@
Sensing distance 2 mm ±10% 5 mm ±10% 5 mm ±10% 10 mm ±10% 10 mm ±10% 18 mm ±10%
Set distance 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm
Differential travel 10% max. of sensing distance
Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.)
Standard sensing object Iron, 12 x 12 x
1mm
Iron, 15 x 15 x
1mm
Iron, 18 x 18 x
1mm
Iron, 30 x 30 x
1mm
Iron, 30 x 30 x
1mm
Iron, 54 x 54 x
1mm
Response speed 25 Hz
Power supply voltage
(operating voltage
range) (See note 1.)
24 to 240 VAC, 50/60 Hz (20 to 264 VAC)
Leakage current 1.7 mA max.
Control
output
Load
current
(See note
2.)
5 to 200 mA 5 to 300 mA
Residual
voltage
Refer to Engineering Data.
Indicator Operation indicator (red LED)
Operation mode (with
sensing object
approaching)
Y1 Models: NO
Y2 Models: NC
For details, refer to Timing Charts.
Ambient temperature Operating/Storage: –40°C to 85°C (with no icing or condensation) (See notes 1 and 2.)
Ambient humidity Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of –40°C to 85°C
±10% max. of sensing distance at 23°C in the temperature range of –25°C to 70°C
Voltage influence ±1% max. of sensing distance in the rated voltage range ±15%
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 1,000 m/s2, 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67
In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.)
Connection method Pre-wired models (standard length: 2 m)
Weight (packed state) Approx. 65 g Approx. 150 g Approx. 210 g
Material Case Brass
Sensing
surface
PBT (polybutylene terephthalate)
Clamping
nuts
Brass-nickel plated
Toothed
washer
Iron-zinc plated
Accessories Instruction manual
16 E2E/E2E2 Cylindrical Proximity Sensor
Engineering Data
E2E
Operating Range (Typical)
Shielded Models
E2E-X@D@
E2E-X@T1 E2E-X@E@/F@
E2E-X@Y@
E2E-C@C@/B@
E2E-X@C@/B@
Unshielded Models
E2E-X@MD@E2E-X@ME@/F@
E2E-X@MY@
X
Y
12
10
8
6
4
2
0
−20 −15 −10 −5 0 5 10 15 20
Distance Y (mm)
E2E-X10
E2E-X7
E2E-X3
E2E-X2
Sensing distance X (mm)
12
10
8
6
4
2
0
−15 −10 −5 0 5 10 15
Distance Y (mm)
E2E-X10
E2E
-X1R5
E2E-X5
E2E-X2
Sensing distance X (mm)
X
Y
Distance Y (mm)
Sensing distance X (mm)
X
Y
30
25
20
15
10
5
0
−30 −20 −10 0 10 20 30
Distance Y (mm)
E2E-X20M
E2E-X14M
E2E-X8M
E2E-X4M
Sensing distance X (mm)
30
25
20
15
10
5
0
−30 −20 −10 0 10 20 30
Distance Y
(
mm
)
E2E-X18M
E2E-X10M
E2E-X5M
E2E-X2M
Sensing distance X (mm)
X
Y
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
−3.0 −2.0 −1.0 0 1.0 3.02.0
E2E-X1/E2E-C1
E2E-CR8
E2E-CR6
X
Y
E2E/E2E2 Cylindrical Proximity Sensor 17
Leakage Current (Typical)
Residual Output Voltage (Typical)
E2E-X@D@E2E-X@Y@E2E-X@T1
DC/AC
Leakage current (mA)
Supply voltage (V)
Leakage current (mA)
Supply voltage (V)
Leakage current (mA)
Su
pp
l
y
volta
g
e
(
V
)
E2E-X10D1-N
E2E-X3D1-N
E2E-X2D1-N
E2E-X7D1-N
AC power supply
DC power supply
Proximity
Sensor
(when
OFF)
Protective
resistance
AC power
supply
E2E-X@D@
Residual output voltage (V)
Load current (mA)
E2E-X@T1
Residual output voltage (V)
Load current (mA)
200 VAC
100 VAC
24 VDC
E2E-X@D1-M1J-T
E2E-X@D@
1 3 5 10 30 50 100
5
4
3
2
1
0
E2E-X@Y@
Load current
(
mA
)
Load voltage VL (V)
Load current
(
mA
)
Load current
(
mA
)
Residual output voltage
Residual
load
voltage
Proximity
Sensor
24 VAC
100 VAC
Residual output voltage
Residual
load
voltage
Proximity
Sensor
Residual output voltage
Residual
load
voltage
Proximity
Sensor
200 VAC
Load voltage VL (V)
Load voltage VL (V)
24 VAC 100 VAC 200 VAC
OFF OFF OFF
18 E2E/E2E2 Cylindrical Proximity Sensor
Sensing Distance vs. Sensing Object (Typical)
E2E-X2D@E2E-X3D@
E2E-X3T1
E2E-X7D@
E2E-X7T1
E2E-X10D@
E2E-X10T1
E2E-X4MD@E2E-X8MD@
E2E-X14MD@E2E-X20MD@E2E-X1R5E@/F@
E2E-X1R5Y@
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Aluminum
Copper
Brass
Stainless steel
(SUS304)
t = 1 mm
Brass
Copper
Stainless steel
(SUS304)
t = 1 mm
Aluminum
Iron
Iron
Copper
Stainless
steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Brass
Aluminum
Copper
Stainless
steel
(SUS304)
t = 1 mm
Iron
Aluminum
Copper
Brass
Stainless
steel
(SUS304)
t = 1 mm
Iron
Copper
Stainless
steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Brass
Stainless
steel
(SUS304)
Aluminum
Copper
t = 1 mm
Sensing distance (mm)
Side length of sensing
object d (mm)
Sensing distance (mm)
Sensing distance (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Sensing distance (mm)
Side length of sensing
object d (mm)
Sensing distance (mm)
Sensing distance (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Sensing distance (mm)
Side length of sensing
ob
j
ect d
(
mm
)
Sensing distance (mm)
Sensing distance (mm)
Side length of sensing
ob
j
ect d
(
mm
)
Side length of sensing
ob
j
ect d
(
mm
)
Brass
Aluminum
Iron
t = 1 mm
Stainless steel
(SUS304)
Copper
E2E/E2E2 Cylindrical Proximity Sensor 19
E2E-X2E@/F@
E2E-X2Y@
E2E-X5E@/F@
E2E-X5Y@
E2E-X10E@F@
E2E-X10Y@
E2E-X2ME@/F@
E2E-X2MY@
E2E-X5ME@/F@
E2E-X5MY@
E2E-X10ME@/F@
E2E-X10MY
E2E-X18ME@/F@
E2E-X18MY@
E2E-CR6@@
E2E-X1@@
E2E-C1@@
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Sensing distance X (mm)
Sensing distance X (mm)
Sensing distance X (mm)
Sensing distance X (mm)
Sensing distance X (mm)
Sensing distance X (mm)
Sensing distance X (mm)
Side length of sensing object d (mm)
Side length of sensing object d (mm)
Sensing distance X (mm)
Sensing distance X (mm)
Side length of sensing object d (mm) Side length of sensing object d (mm)
Side length of sensing object d (mm) Side length of sensing object d (mm) Side length of sensing object d (mm)
Side length of sensing object d (mm) Side length of sensing object d (mm) Side length of sensing object d (mm)
E2E-CR8@@
Iron
Copper
Stainless
steel
(SUS304)
Brass
Aluminum
t = 1 mm
Sensing distance X (mm)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
t = 1 mm
Brass
Copper
Stainless steel
(SUS304)
Alumi-
num
Iron
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0 5 10 15 20
Stainless
steel
(SUS304)
Iron
Brass
Aluminum
@d
t = 1 mm
X
20 E2E/E2E2 Cylindrical Proximity Sensor
E2E2
Operating Range (Typical)
Leakage Current (Typical)
Shielded Models
E2E2-X@D@E2E2-X@C@/B@
E2E2-X@Y@
Unshielded Models
E2E2-X@MD@E2E2-X@MC@/B@
E2E2-X@MY@
X
Y
12
10
8
6
4
2
0
E2E2-X10
E2E2-X7
E2E2-X3
−20 −15 −10 −5 5 10 15 200
Sensing Distance X (mm)
Distance Y (mm)
-10 -5 0 5 10 15-15
3.0
2.5
2.0
1.5
1.0
0.5
0
E2E2-X2
Sensing Distance X (mm)
Distance Y (mm)
X
Y
−20 −10 0 10 20 30−30
30
25
20
15
10
5
0
E2E2-X20M
E2E2-X14M
E2E2-X8M
X
Y
Sensing Distance X (mm)
Distance Y (mm)
6
5
4
3
2
1
0
E2E2-X5M
-8 -6 -4 -2 2 4 6 80
Sensing Distance X (mm)
Distance Y (mm)
X
Y
−20 −10 0 10 20 30−30
30
25
20
15
10
5
0
E2E2-X18M
E2E2-X10M
X
Y
Sensing Distance X (mm)
Distance Y (mm)
−10−15
12
10
8
6
4
2
0
E2E2-X10
E2E2-X5
−55
0
X
Y
Sensing Distance X (mm)
Distance Y (mm)
15
10
E2E2-X@D@E2E2-X@Y@
Leakage current (mA)
Supply voltage (V)
Leakage current (mA)
Supply voltage (V)
AC
power
supply
Proximity
Sensor
(when
OFF)
Protective
resistance
E2E/E2E2 Cylindrical Proximity Sensor 21
Residual Output Voltage (Typical)
Sensing Distance vs. Sensing Object (Typical)
E2E2-X@D@
E2E2-X@Y@
Residual output voltage (V)
Load current (mA)
Load current (mA)
Residual load voltage V (V)
Load current (mA)
Residual load voltage V (V)
Load current (mA)
Residual load voltage V (V)
Residual output voltage
Residual
load
voltage
Proximity
Sensor
24 VAC
100 VAC
Residual output voltage
Residual
load
voltage
Proximity
Sensor
Residual output voltage
Residual
load
voltage
Proximity
Sensor
200 VAC
24 VAC 100 VAC 200 VAC
OFFOFFOFF
E2E2-X3D@E2E2-X7D@E2E2-X10D@
Sensing distance (mm)
Side length of sensing
object d (mm)
Sensing distance (mm)
Sensing distance (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
t= 1 mm
t= 1 mm t= 1 mm
22 E2E/E2E2 Cylindrical Proximity Sensor
E2E2-X8MD@E2E2-X14MD@E2E2-X20MD@
Sensing distance (mm)
Side length of sensing
object d (mm)
Sensing distance (mm)
Sensing distance (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Iron
Stainless steel
(SUS304)
Brass
Aluminum
Copper
Iron
Stainless
steel
(SUS304)
Brass
Aluminum
Copper
t=1 mm t=1 mm
t=1 mm
E2E2-X2C@/B@
E2E2-X2Y@
E2E2-X5C@/B@
E2E2-X5Y@
E2E2-X10C@/B@
E2E2-X10Y@
Sensing distance (mm)
Side length of sensing
object d (mm)
Sensing distance (mm)
Side length of sensing
object d (mm)
Iron
Stainless steel (SUS304)
Brass
Aluminum
Iron
Stainless steel (SUS304)
Brass
Aluminum
t=1 mm
t=1 mm
Sensing distance (mm)
Side length of sensing
ob
j
ect d
(
mm
)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
E2E2-X5MC@/B@
E2E2-X5MY@
E2E2-X10MC@/B@
E2E2-X10MY@
E2E2-X18MC@/B@
E2E2-X18MY@
Sensing distance (mm)
Sensing distance (mm)
Side length of sensing
object d (mm)
Side length of sensing
object d (mm)
Iron
Stainless steel (SUS304)
Brass
Aluminum
Iron
Stainless steel (SUS304)
Brass
Aluminum
t-=1 mm
t-=1 mm
Sensing distance (mm)
Side length of sensing
object d (mm)
Iron
Stainless steel
(SUS304)
Brass
Aluminum
t = 1 mm
E2E/E2E2 Cylindrical Proximity Sensor 23
Output Circuits and Timing Charts
■Output Circuits
E2E
E2E-X@D@ DC 2-wire Models
DC 3-wire Models
E2E-X@D1
Without Diagnostic Output
E2E-X@D1-M1J-T
No Polarity
E2E-X@D1S
With Diagnostic Output
Load
Brown
4
Blue 0 V
1
(0 V)
0 V
4
3
Load
Brown
Blue 3
0 V
4
Load
Load
2
Orange (diagnostic
output)
E2E-X@D2
Without Diagnostic Output
Brown
2
Blue 0 V
1
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Note: 1. The load can be connected to
either the +V or 0 V side.
2. The pin numbers in the above diagram
are for the -M@G(J). For the -M1, pin 4
is +V and pin 3 is 0 V.
Note: 1. The load can be connected to
either the +V or 0 V side.
2. The E2E-X@D1-M1J-T has no
polarity. Therefore, terminals 3
and 4 have no polarity.
Note: 1. The load can be connected to
either the +V or 0 V side.
2. The pin numbers in the above
diagram are for the -M@G.
For -M1 models, pin 2 is +V
and
p
in 3 is 0 V.
Note: Connect both the loads to the +V
side of the control output and
diagnostic output.
Load
Brown 1
Blue 3
Load
Black 4
(or 2)**
100 Ω
Constant
current*
E2E-X@E@
NPN Output
E2E-C/X@C@
NPN Open-collector Output
E2E-C/X@B@
PNP Open-collector Output
E2E-X@F@
PNP Output
Blue 3
Load
Black 4
(or 2)***
Brown 1
0 V
100 Ω
*
**
Blue 3
Load
Black 4
Brown 1
0 V
100 Ω
Blue 3
Load
Black 4
Brown 1
0 V
Output
100 Ω
* Constant current output is 1.5 to 3 mA.
** When connecting to a Tr circuit.
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
*** Pin 4 is an NO contact, and pin 2 is an NC contact.
* Constant current output is 1.5 to 3 mA.
* E2E-CR6@ has no 100-Ω resistance. * E2E-CR6@ has no 100-Ω resistance.
** Pin 4 is an NO contact, and pin 2 is an NC contact.
0 V
24 E2E/E2E2 Cylindrical Proximity Sensor
E2E-X@Y@ AC 2-wire Models E2E-X@T1 AC/DC 2-wire Models
E2E2
E2E2-X@D@ DC 2-wire Models
Note: The load can be connected to either the +V or 0 V side.
E2E2-X@Y@ DC 2-wire Models
Load
Brown 3 (or 1)
Blue 4 (or 2)
Proximity
sensor
main
circuit
Note: For connector models, the
connection between pins 3 and 4
uses an NO contact, and the
connection between pins 1 and 2
uses an NC contact.
24 to 240 VDC
48 to 240 VAC
Load
Brown
Blue
Power
supply
Proximity
sensor
main
circuit
Note: The load can be connected to either
the +V or 0 V side.
There is no need to be concerned
about the polarity (Brown/Blue) of the
Proximity Sensor.
Load
Brown
Blue 0 V
Proximity
sensor
main
circuit
Brown 1
Black
4 (or 2)*
Blue 3
0 V
Load
100 Ω
+ V
Brown 1
Black 4 (or 2)*
Blue 3 0 V
Load
100 Ω
+ V
E2E2-X@C@ DC 3-wire Models E2E2-X@B@ DC 3-wire Models
Proximity
sensor
main
circuit
Proximity
sensor
main
circuit
* Pin 4 is an NO contact, and pin 2 is an NC contact. * Pin 4 is an NO contact, and
p
in 2 is an NC contact.
Brown 2
Blue 3
Load
Proximity
sensor
main
circuit
E2E/E2E2 Cylindrical Proximity Sensor 25
■Timing Charts
E2E
E2E-X@D@ DC 2-wire Models
E2E-X@T1 AC/DC 2-wire Models
DC 3-wire Models
E2E-X@D1
E2E-X@T1
NO Models
E2E-X@D2
NC Models
E2E-X@D1S
Non-sensing
area
Unstable
sensing area
Set
position
Stable sensing
area
Sensing
object
Proximity
Sensor
Rated sensing
distance
Stable sensing
area
ON
OFF
Setting
indicator (green)
ON
OFF
Operation
indicator (red)
Control
output
ON
OFF
Non-sensing area Sensing area Proximity
Sensor
ON
OFF
Control
output
Sensing
object
Operation
indicator (red)
ON
OFF
Non-sensing
area
Unstable
sensing area
Set
position
Stable sensing
area
Sensing
object
Proximity
Sensor
ON
OFF
Setting
indicator (green)
ON
OFF
Diagnostic
output (see note)
Control
output
Operation
indicator (red)
ON
OFF
ON
OFF
Note: The diagnostic output of the E2E-X@D1S is
ON when there is a coil burnout or the
sensing object is located in the unstable
sensing range for 0.3 s or more.
Rated sensing
distance
Rated sensing
distance
E2E-X@E@
NPN Output
E2E-C/X@C@/B@
NPN/PNP Open-collector Output
E2E-X@F@
PNP Output
Ye s
No
ON
OFF
Sensing
object
Control output
between brown and black lines
Output voltage
between black and blue lines
Operation
indicator (red)
ON
OFF
H
L
Sensing
object
Control output
between black and blue lines
Ye s
No
ON
OFF
Operation
indicator (red)
ON
OFF
ON
OFF
Sensing
object
Control
output
Ye s
No
ON
OFF
Operation
indicator (red)
ON
OFF
Output voltage
between black and blue lines
26 E2E/E2E2 Cylindrical Proximity Sensor
E2E-X@Y@ AC 2-wire Models
E2E2
E2E2-X@D@ DC 2-wire Models
E2E2-X@C@/B@ DC 3-wire Models
E2E2-X@Y@ AC 2-wire Models
Sensing
object
Control
output
Ye s
No
ON
OFF
Operation
indicator (red)
ON
OFF
NO Models NC Models
Non-sensing
area
Unstable
sensing area
Set
position
Stable sensing
area
Sensing
object
Proximity
Sensor
Stable sensing
area
ON
OFF
Setting
indicator (green)
ON
OFF
Operation
indicator (red)
Control
output
ON
OFF
Rated sensing
distance
Non-sensing area Sensing area Proximity
Sensor
Sensing
object
ON
OFF
Operation
indicator (red)
Control
output
ON
OFF
Rated sensing
distance
Sensing object
Control output
Operation
indicator (red)
Ye s
No
ON
OFF
ON
OFF
NPN/PNP Open-collector Output
Sensing object
Control output
Operation
indicator (red)
Ye s
No
ON
OFF
ON
OFF
E2E/E2E2 Cylindrical Proximity Sensor 27
Installation
■Connection
E2E
E2E-X@D@
DC 2-wire Models
(Without Diagnostic Output)
E2E-X@Y@
AC 2-wire Models
E2E-X@T1
AC/DC 2-wire Models
E2E-X@D1S
DC 3-wire Models
(With Diagnostic Output)
E2E-X@D1-M1J-T
DC 2-wire Models
(No Polarity)
E2E-X@Y@
AC 2-wire Models
E2E-X@T1
AC/DC 2-wire Models
Blue
Load
Load
Brown
Brown
Blue
Power
supply
Power
supply
Orange
Blue
Brown Load
Load
Load
Blue
Brown
Power
supply
Note: The load can be connected
as shown above.
Note: The control output and
diagnostic output share the
negative common terminal.
Therefore, the loads must be
connected to the positive
sides of the control output
and diagnostic output.
Note: There is no need to be
concerned about the polarity
(Brown/Blue) of the
Proximity Sensor.
Connected to PC
E2E-X@D@
DC 2-wire Models
E2E-X@E@
DC 3-wire Models
Connected to Relay Load
E2E-X@D@
DC 2-wire Models
E2E-X@E@
DC 3-wire Models E2E-X@F@
DC 3-wire Models
24 VDC
Blue
Brown
24 VDC
Brown
Blue
24 VDC
Blue
Brown
Black
Blue
Brown
Black
Brown
Blue
Black
28 E2E/E2E2 Cylindrical Proximity Sensor
E2E2
E2E2-X@D@
DC 2-wire Models
E2E2-X@Y@
AC 2-wire Models
Note: The load can be connected as shown in the above diagrams.
Connected to PC
E2E2-X@D@
DC 2-wire Models E2E2-X@C@
DC 3-wire Models
Blue
Load
Load
Brown Brown
Blue
Power
supply
Power
supply
24 VDC
Blue
Brown
24 VDC
Blue
Brown
Black
E2E/E2E2 Cylindrical Proximity Sensor 29
■Pin Arrangement
E2E-X@D@-M@ DC 2-wire Models
Note: The above pin arrangements conform to IEC standards.
Connector Self-
diagnostic
output
Opera-
tion
mode
Applicable
models
Pin arrangement
M12 No NO E2E-X@D1-M1G@
(See note.)
E2E-X@D1-M1J-T
E2E-X@D1-M1
NC E2E-X@D2-M1G
(See note.)
E2E-X@D2-M1
Yes NO E2E-X@D1S-M1
M8 No NO E2E-X@D1-M3G
NC E2E-X@D2-M3G
Note: Terminals 2 and 3 are not used.
Load
Load
Load
or
Load
or
Note: 1. Terminals 1 and 2 are not used.
2. Terminals 3 and 4 has no
polarity.
Note: Terminals 1 and 2 are not used.
Load
Load
Note: Terminals 3 and 4 are not used.
Load
Load
Load
Load
Note: Terminal 1 is not used.
Note: Terminals 1 is not used.
Load
Load
(S
e
lf
-
di
agnost
i
c output
)
Note: Terminals 2 and 3 are not used.
Load
Load
Note: Terminals 3 and 4 are not used.
Load
Load
30 E2E/E2E2 Cylindrical Proximity Sensor
E2E-X@E/F@-M@ DC 3-wire Models
Connector Operation mode Applicable models Pin arrangement
M12 NO E2E-X@E1-M1
E2E-X@F1-M1
NC E2E-X@E2-M1
E2E-X@F2-M1
M8 NO E2E-X@E1-M3
E2E-X@F1-M3
NC E2E-X@E2-M3
E2E-X@F2-M3
Note: Terminal 2 is not used.
Load
Note: Terminal 2 is not used.
Load
Note: Terminal 4 is not used.
Load
Note: Terminal 4 is not used.
Load
Note: Terminal 2 is not used.
Load
Note: Terminal 2 is not used.
Load
Note: Terminal 4 is not used.
Load
Note: Terminal 4 is not used.
Load
E2E/E2E2 Cylindrical Proximity Sensor 31
E2E-CR8C@/CR8B@/X1C@/X1B@-M5 DC 3-wire Models
E2E-X@Y@-M1 AC 2-wire Models
Precautions
Mounting
Do not tighten the nut with excessive force. A washer must be used
with the nut.
Note: The table below shows the tightening torques for part A and
part B nuts. In the previous examples, the nut is on the sensor
head side (part B) and hence the tightening torque for part B
applies. If this nut is in part A, the tightening torque for part A
applies instead.
Refer to the following to mount the E2E-CR6, -CR8 and E2E-C1
non-screw models.
Tighten the screw to a torque of 0.2 N·m maximum to secure the
E2E-CR6, -CR8 and a torque of 0.4 N·m maximum to secure the
E2E-C1.
Connector Operation mode Applicable models Pin arrangement
M8-3pin NO/NC E2E-CR8C@-M5
E2E-X1C@-M5
NO/NC E2E-CR8B@-M5
E2E-X1B@-M5
DC
Load
1
4
3
DC
Load
1
4
3
Operation mode Applicable models Pin arrangement
NO E2E-X@Y1-M1
NC E2E-X@Y2-M1
Note: Terminals 1 and 2 are not used.
Load
Load
Note: Terminals 3 and 4 are not used.
Load
Load
Model Part A Part B
Length Torque Torque
M5 1 N·m
M8 Shielded 9 mm 9 N·m 12 N·m
Unshielded 3 mm
M12 30 N·m
M18 70 N·m
M30 180 N·m
Shielded Model Unshielded Model
Part B Part A Part B Part A
M3 hole
No screw is provided
with the E2E-CR6,
-CR8 or E2E-C1.
E2E-CR6: 9 to 21 mm
E2E-CR8, -C1: 8 to 21 mm
32 E2E/E2E2 Cylindrical Proximity Sensor
Influence of Surrounding Metal
When mounting the E2E within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these
distances may cause deterioration in the performance of the sensor.
d dia.
Model Item M8 M12 M18 M30
E2E-X@D@
DC 2-wire
E2E-X@T1
AC/DC 2-wire
E2E2-X@D@
DC 2-wire
Shielded l 0 mm
d 8 mm 12 mm 18 mm 30 mm
D0 mm
m 4.5 mm 8 mm 20 mm 40 mm
n 12 mm 18 mm 27 mm 45 mm
Unshielded l 12 mm 15 mm 22 mm 30 mm
d 24 mm 40 mm 70 mm 90 mm
D 12 mm 15 mm 22 mm 30 mm
m 8 mm 20 mm 40 mm 70 mm
n 24 mm 40 mm 70 mm 90 mm
E2E-X@E@
E2E-X@F@
DC 3-wire
E2E-X@Y@
AC 2-wire
E2E2-X@B@
E2E2-X@C@
DC 3-wire
E2E2-X@Y@
AC 2-wire
Shielded l 0 mm
d 8 mm 12 mm 18 mm 30 mm
D0 mm
m 4.5 mm 8 mm 20 mm 40 mm
n 12 mm 18 mm 27 mm 45 mm
Unshielded l 6 mm 15 mm 22 mm 30 mm
d 24 mm 40 mm 55 mm 90 mm
D 6 mm 15 mm 22 mm 30 mm
m 8 mm 20 mm 40 mm 70 mm
n 24 mm 36 mm 54 mm 90 mm
Model Item 3 dia. 4 dia. M5 5.4 dia.
E2E-X@C@
E2E-X@B@
E2E-C@C@
E2E-C@B@
DC 3-wire
Shielded l 0 mm
d 3 mm 4 mm 5 mm 5.4 mm
D0 mm
m 2 mm 2.4 mm 3 mm 3 mm
n 6 mm 6 mm 8 mm 8 mm
E2E/E2E2 Cylindrical Proximity Sensor 33
Relationship between Sizes and Models
E2E
E2E2
Model Model No.
3 dia. Shielded E2E-CR6C@
E2E-CR6B@
4 dia. E2E-CR8C@
E2E-CR8B@
M5 E2E-X1C@
E2E-X1B@
5.4 dia. E2E-C1C@
E2E-C1B@
M8 Shielded E2E-X2D@
E2E-X1R5E@/F@
E2E-X1R5Y@
Unshielded E2E-X4MD@
E2E-X2ME@/F@
E2E-X2MY@
M12 Shielded E2E-X3D@
E2E-X2E@/F@
E2E-X2Y@
E2E-X3T1
Unshielded E2E-X8MD@
E2E-X5ME@/F@
E2E-X5MY@
M18 Shielded E2E-X7D@
E2E-X5E@/F@
E2E-X5Y@
E2E-X7T1
Unshielded E2E-X14MD@
E2E-X10ME@/F@
E2E-X10MY@
M30 Shielded E2E-X10D@
E2E-X10E@/F@
E2E-X10Y@
E2E-X10T1
Unshielded E2E-X20MD@
E2E-X18ME@/F@
E2E-X18MY@
Model Model No.
M12 Shielded E2E2-X3D@
E2E2-X2C@/B@
E2E2-X2Y@
Unshielded E2E2-X8MD@
E2E2-X5MC@/B@
E2E2-X5MY@
M18 Shielded E2E2-X7D@
E2E2-X5C@/B@
E2E2-X5Y@
Unshielded E2E2-X14MD@
E2E2-X10MC@/B@
E2E2-X10MY@
M30 Shielded E2E2-X10D@
E2E2-X10C@/B@
E2E2-X10Y@
Unshielded E2E2-X20MD@
E2E2-X18MC@/B@
E2E2-X18MY@
34 E2E/E2E2 Cylindrical Proximity Sensor
Mutual Interference
When installing two or more Sensors face to face or side by side, ensure that the minimum distances given in the following table are maintained.
Note: Values in parentheses apply to Sensors operating at different frequencies.
AB
Model Item M8 M12 M18 M30
E2E-X@D@
DC 2-wire
E2E-X@T1
AC/DC 2-wire
E2E2-X@D@
DC 2-wire
Shielded A 20 mm 30 (20) mm 50 (30) mm 100 (50) mm
B 15 mm 20 (12) mm 35 (18) mm 70 (35) mm
Unshielded A 80 mm 120 (60) mm 200 (100) mm 300 (100) mm
B 60 mm 100 (50) mm 110 (60) mm 200 (100) mm
E2E-X@E@
E2E-X@F@
DC 3-wire
E2E-X@Y@
AC 2-wire
E2E2-X@B@
E2E2-X@C@
DC 3-wire
E2E2-X@Y@
AC 2-wire
Shielded A 20 mm 30 (20) mm 50 (30) mm 100 (50) mm
B 15 mm 20 (12) mm 35 (18) mm 70 (35) mm
Unshielded A 80 mm 120 (60) mm 200 (100) mm 300 (100) mm
B 60 mm 100 (50) mm 110 (60) mm 200 (100) mm
Model Item 3 dia. 4 dia. M5 5.4 dia.
E2E-X@B@
E2E-X@C@
E2E-C@B@
E2E-C@C@
DC 3-wire
Shielded A 20 mm
B 15 mm
E2E/E2E2 Cylindrical Proximity Sensor 35
■Precautions for Safe Use
The colors in parentheses are previous wire colors.
■Precautions for Correct Use
Installation
Power Reset Time
The Proximity Sensor is ready to operate within 100 ms after power
is supplied. If power supplies are connected to the Proximity Sensor
and load respectively, be sure to supply power to the Proximity
Sensor before supplying power to the load.
Power OFF
The Proximity Sensor may output a pulse signal when it is turned
OFF. Therefore, it is recommended to turn OFF the load before
turning OFF the Proximity Sensor.
Power Supply Transformer
When using a DC power supply, make sure that the DC power
supply has an insulated transformer. Do not use a DC power supply
with an auto-transformer.
Sensing Object
Metal Coating:
The sensing distances of the Proximity Sensor vary with the metal
coating on sensing objects.
WARNING
This product is not designed or rated for ensuring safety
of persons.
Do not use it for such purposes.
Item Examples
Power supply
Do not impose an excessive voltage on the
E2E/E2E2, otherwise it may explode or burn.
Do not impose 100 VAC on any E2E/E2E2
DC Model, otherwise it may explode or burn.
Load short-circuit
Do not short-circuit the load, or the E2E/E2E2
may explode or burn.
The E2E/E2E2’s short-circuit protection
function is valid if the polarity of the supply
voltage imposed is correct and within the
rated voltage range.
Wiring
Be sure to wire the E2E/E2E2 and load
correctly, otherwise it may explode or burn.
Connection with no load
Make sure to connect a proper load to the
E2E/E2E2 in operation, otherwise it may
explode or burn.
DC 3-wire Models
Sensor
Brown
Black
Blue
Load
Incorrec
t
DC 2-wire Models
Sensor
Brown
Blue
Load
Incorrect
DC 3-wire Models (NPN output)
Sensor
Brown
Black
Blue
Load
Incorrect
(Load
short-
circuit)
DC 2-wire Models
Sensor
Brown
Blue
Load
Incorrect
(Load short-circuit)
The following diagram shows that the load is
short-circuited while the polarity of the supply
voltage imposed on the E2E/E2E2 is wrong,
in which case the E2E/E2E2 may explode or
burn.
DC 3-wire Models (NPN output)
Sensor
Brown
Blue
Load
Black
Sensor
Brown
Black
Load
Blue
Incorrect Incorrect
DC 3-wire Models
Sensor
Brown
Blue
Load
Incorrect
AC 2-wire Models
Sensor
Brown
Blue
Load
Incorrec
t
36 E2E/E2E2 Cylindrical Proximity Sensor
Wiring
High-tension Lines
Wiring through Metal Conduit
If there is a power or high-tension line near the cable of the Proximity
Sensor, wire the cable through an independent metal conduit to
prevent against Proximity Sensor damage or malfunctioning.
Cable Tractive Force
Do not pull on cables with tractive forces exceeding the following.
Mounting
The Proximity Sensor must not be subjected to excessive shock with
a hammer when it is installed, otherwise the Proximity Sensor may
be damaged or lose its water-resistivity.
Environment
Water Resistivity
Do not use the Proximity Sensor underwater, outdoors, or in the rain.
Operating Environment
Be sure to use the Proximity Sensor within its operating ambient
temperature range and do not use the Proximity Sensor outdoors so
that its reliability and life expectancy can be maintained. Although
the Proximity Sensor is water resistive, a cover to protect the
Proximity Sensor from water or water soluble machining oil is
recommended so that its reliability and life expectancy can be
maintained.
Do not use the Proximity Sensor in an environment with chemical
gas (e.g., strong alkaline or acid gasses including nitric, chromic,
and concentrated sulfuric acid gases).
Connecting Load to AC/DC 2-wire Sensor
Refer to the following before using AC or DC 2-wire Proximity
Sensors.
Surge Protection
Although the Proximity Sensor has a surge absorption circuit, if there
is any machine that has a large surge current (e.g., a motor or
welding machine) near the Proximity Sensor, connect a surge
absorber to the machine.
Leakage Current
When the Proximity Sensor is OFF, the Proximity Sensor has
leakage current. Refer to page 17 and page 20 Leakage Current
Characteristics. In this case, the load is imposed with a small voltage
and the load may not be reset. Before using the Proximity Sensor,
make sure that this voltage is less than the load reset voltage. The
AC 2-wire Proximity Sensor cannot be connected to any card-lift-off
relay (e.g., the G2A) because contact vibration of the relay will be
caused by the leakage current and the life of the relay will be
shortened.
Loads with Large Inrush Currents
(E2E-X@T@)
Connecting a load that has a large inrush current (e.g., a lamp or
motor) may result in a malfunction due to the inrush current causing
a load short-circuit.
Countermeasures Against Leakage Current
AC 2-wire Models
Connect a bleeder resistor as the bypass for the leakage current so
that the current flowing into the load will be less than the load reset
current.
As shown in the following diagram, connect the bleeder resistor so
that the current flowing into the Proximity Sensor will be 10 mA
minimum and the residual voltage imposed on the load will be less
than the load reset voltage.
Refer to the following to calculate the bleeder resistance and the
allowable power of the bleeder resistor.
R ≤ VS/(10 – I) (kΩ)
P > VS2/R (mW)
P: The allowable power of the bleeder resistor. (The actual power
capacity of the bleeder resistor must be at least a few times as
large as the allowable power of the bleeder resistor.)
I: Load current (mA)
The following resistors are recommended.
100 VAC (supply voltage): A resistor with a resistance of 10 kΩ
maximum and an allowable power of 3 W minimum
200 VAC (supply voltage): A resistor with a resistance of 20 kΩ
maximum and an allowable power of 10 W minimum
If these resistors generate excessive heat, use a resistor with a
resistance of 10 kΩ maximum and an allowable power of 5 W
minimum at 100 VAC and a resistor with a resistance of 20 kΩ
maximum and an allowable power of 10 W minimum at 200 VAC
instead.
DC 2-wire Models
Connect a bleeder resistor as the bypass for the leakage current so
that the current flowing into the load will be less than the load reset
current.
Refer to the following to calculate the bleeder resistance and the
allowable power of the bleeder resistor.
R ≤ VS/(iR – iOFF) (kΩ)
P > VS2/R (mW)
P: The allowable power of the bleeder resistor. (The actual power
capacity of the bleeder resistor must be at least a few times as
large as the allowable power of the bleeder resistor.)
iR: Leakage current of Sensors (mA)
iOFF: Release current of load (mA)
The following resistors are recommended.
12 VDC (supply voltage): A resistor with a resistance of 15 kΩ
maximum and an allowable power of 450 mW minimum
24 VDC (supply voltage): A resistor with a resistance of 30 kΩ
maximum and an allowable power of 0.1 W minimum
Diameter Tractive force
4 dia. max. 30 N max.
4 dia. min. 50 N max.
Load
Bleeder resistor R
VAC power
supply VS
Load
Bleeder resistor R
E2E/E2E2 Cylindrical Proximity Sensor 37
Connection to a PLC
Required Conditions
Connection to a PLC is possible if the specifications of the PLC and
the Proximity Sensor satisfy the following conditions. (The meanings
of the symbols are given below.)
1. The ON voltage of the PLC and the residual voltage of the Prox-
imity Sensor must satisfy the following.
VON ≤ VCC – VR
2. The OFF current of the PLC and the leakage current of the Prox-
imity Sensor must satisfy the following.
IOFF ≥ Ileak
(If the OFF current is not listed in the specifications, take it to be
1.3 mA.)
3. The ON current of the PLC and the control output (IOUT) of the
Proximity Sensor must satisfy the following.
IOUT(min) ≤ ION ≤ IOUT(max)
The ON current of the PLC will vary, however, with the power sup-
ply voltage and the input impedance used as shown in the follow-
ing equation.
ION = (VCC – VR – )/RIN
Example
In this example, the above conditions are checked for when the PLC
model is the C200H-ID212, the Proximity Sensor model is the E2E-
X7D1-N, and the power supply voltage is 24 V.
1. VON (14.4 V) ≤ VCC (20.4 V) – VR (3 V) = 17.4 V: OK
2. IOFF (1.3 mA) ≥ Ileak (0.8 mA): OK
3. ION = [VCC (20.4 V) – VR (3 V) –
≈ 4.5 mA
Therefore,
IOUT(min) (3 mA) ≤ ION (4.5 mA): OK
VON: ON voltage of PLC (14.4 V)
ION: ON current of PLC (typ. 7 mA)
IOFF: OFF current of PLC (1.3 mA)
RIN: Input impedance of PLC (3 kΩ)
VR: Output residual voltage of Proximity Sensor (3 V)
Ileak: Leakage current of Proximity Sensor (0.8 mA)
IOUT: Control output of Proximity Sensor (3 to 100 mA)
VCC: Power supply voltage (PLC: 20.4 to 26.4 V)
Values in parentheses are for the following PLC model and Proximity
Sensor model.
PLC: C200H-ID212
Proximity Sensor: E2E-X7D1-N
■Precautions for AC/DC 2-wire Proximity Sensors in Operation
Connection
VPC
VPC (4 V)]/RIN (3 kΩ)
VPC: Internal residual voltage of PLC (4 V
)
Model Connection type Method Description
DC 2-wire AND (serial connection) The Sensors connected together must satisfy the
following conditions.
VS – N x VR ≥ Load operating voltage
N: No. of Sensors
VR: Residual voltage of each Sensor
VS: Supply voltage
If each Proximity Sensor is not supplied with the
rated voltage and current, the indicator will not be lit
properly or unnecessary pulses may be output for
approximately 1 ms.
OR
(parallel connection)
The Sensors connected together must satisfy the
following conditions.
N x i ≤ Load reset current
N: No. of Sensors
i: Leakage current of each Sensor
If the MY Relay, which operates at 24 VDC, is used
as a load for example, a maximum of four Proximity
Sensors can be connected to the load.
AC 2-wire AND (serial connection) If 100 or 200 VAC is imposed on the Proximity
Sensors, VL (i.e., the voltage imposed on the load)
will be obtained from the following.
VL = VS – (residual voltage x No. of Proximity
Sensors) (V)
Therefore, if VL is lower than the load operating
voltage, the load will not operate.
A maximum of three Proximity Sensors can be
connected in series provided that the supply voltage
is 100 V minimum.
Load
Correct
Load
Correct
Load
Load
Load
V
s
× 100
V
Incorrect
Correct
38 E2E/E2E2 Cylindrical Proximity Sensor
AC 2-wire OR
(parallel connection)
In principle, more than two Proximity Sensors cannot
be connected in parallel.
Provided that Proximity Sensor A does not operate
with Proximity Sensor B simultaneously and there is
no need to keep the load operating continuously, the
Proximity Sensors can be connected in parallel. In
this case, however, due to the total leakage current
of the Proximity Sensors, the load may not reset
properly.
It is not possible to keep the load operating
continuously with Proximity Sensors A and B in
simultaneous operation to sense sensing objects
due to the following reason.
When Proximity Sensor A is ON, the voltage
imposed on Proximity Sensor A will drop to
approximately 10 V and the load current flows into
Proximity Sensor A, and when one of the sensing
objects is close to Proximity Sensor B, Proximity
Sensor B will not operate because the voltage
imposed on Proximity Sensor B is 10 V, which is too
low. When Proximity Sensor A is OFF, the voltage
imposed on Proximity Sensor B will reach the supply
voltage and Proximity Sensor B will be ON. Then,
Proximity Sensor A as well as Proximity Sensor B
will be OFF for approximately 10 ms, which resets
the load for an instant. To prevent the instantaneous
resetting of the load, use a relay as shown on the left.
DC 3-wire AND (serial connection) The Sensors connected together must satisfy the
following conditions.
iL + (N –1) x i ≤ Upper-limit of control output of each
Sensor
VS – N x VR ≥ Load operating voltage
N: No. of Sensors
VR: Residual voltage of each Sensor
VS: Supply voltage
i: Current consumption of the Sensor
iL: Load current
If the MY Relay, which operates at 24 VDC, is used
as a load for example, a maximum of two Proximity
Sensors can be connected to the load.
Model Connection type Method Description
Load
Load
VAC power
supply V
S
AB
A
B
Incorrect
Correct
Load
Correct
E2E/E2E2 Cylindrical Proximity Sensor 39
Dimensions
Note: All units are in millimeters unless otherwise indicated.
E2E
Note 1. Two clamping nuts and one toothed washer are provided with M8 to M30 Models.
2. The model numbers of Pre-wired M8 to M30 Models are laser-marked on the milled section and cable section.
Model DC 2-wire DC 3-wire AC 2-wire AC/DC 2-wire
Model No. Figure
No.
Model No. Figure
No.
Model No. Figure
No.
Model No. Figure
No.
Pre-wired Shielded 3 dia. --- --- E2E-CR6@1 --- --- --- ---
4 dia. E2E-CR8@@ 2
M5 E2E-X1@@ 4
5.4 dia. E2E-C1@@ 3
M8 E2E-X2D@-N 5 E2E-X1R5E@/F@5E2E-X1R5Y@7
M12 E2E-X3D@-N 9 E2E-X2E@/F@9E2E-X2Y@11 E2E-X3T1 12
M18 E2E-X7D@-N 14 E2E-X5E@/F@14 E2E-X5Y@12 E2E-X7T1 13
M30 E2E-X10D@-N 16 E2E-X10E@/F@16 E2E-X10Y@16 E2E-X10T1 15
Unshield-
ed
M8 E2E-X4MD@6 E2E-X2ME@/F@6E2E-X2MY@8 --- ---
M12 E2E-X8MD@10 E2E-X5ME@/F@10 E2E-X5MY@12
M18 E2E-X14MD@15 E2E-X10ME@/F@15 E2E-X10MY@15
M30 E2E-X20MD@17 E2E-X18ME@/F@17 E2E-X18MY@17
Connector
(M12)
Shielded M8 E2E-X2D@-M1(G) 18 E2E-X1R5E@-M1/
F@-M1
18 --- --- --- ---
M12 E2E-X3D@-M1(G) 20 E2E-X2E@-M1
/F@-M1
20 E2E-X2Y@-M1 22
M18 E2E-X7D@-M1(G) 24 E2E-X5E@-M1
/F@-M1
24 E2E-X5Y@-M1 24
M30 E2E-X10D@-M1(G) 26 E2E-X10E@-M1
/F@-M1
26 E2E-X10Y@-M1 26
Unshield-
ed
M8 E2E-X4MD@-M1(G) 19 E2E-X2ME@-M1
/F@-M1
19 --- --- --- ---
M12 E2E-X8MD@-M1(G) 21 E2E-X5ME@-M1
/F@-M1
21 E2E-X5MY@-M1 23
M18 E2E-X14MD@-
M1(G)
25 E2E-X10ME@-M1/
F@-M1
25 E2E-X10MY@-M1 25
M30 E2E-X20MD@-
M1(G)
27 E2E-X18ME@-M1/
F@-M1
27 E2E-X18MY@-M1 27
Connec-
tor (M8-3
pin)
Shielded 4 dia. --- --- E2E-CR8@@-M5 36 --- --- ---
M5 --- --- E2E-X1@@-M5 37 --- --- ---
Connector
(M8)
Shielded M8 E2E-X2D@-M3G 28 E2E-X1R5E@-M3/
F@-M3
28 --- --- --- ---
Unshield-
ed
E2E-X4MD@-M3G 29 E2E-X2ME@-M3
/F@-M3
29
Pre-wired
connector
Shielded M12 E2E-X3D1-M1GJ 30 --- --- --- --- --- ---
M18 E2E-X7D1-M1GJ 32
M30 E2E-X10D1-M1GJ 34
Unshield-
ed
M12 E2E-X8MD1-M1GJ 31 --- --- --- --- --- ---
M18 E2E-X14MD1-M1GJ 33
M30 E2E-X20MD1-M1GJ 35
Pre-wired
connector
(no polari-
ty)
Shielded M12 E2E-X3D1-M1J-T 30 --- --- --- --- --- ---
M18 E2E-X7D1-M1J-T 32
M30 E2E-X10D1-M1J-T 34
40 E2E/E2E2 Cylindrical Proximity Sensor
Pre-wired Models
(Shielded)
Fig. 2: E2E-CR8@@
Fig. 1: E2E-CR6@@
Fig. 4: E2E-X1@@
Fig. 3: E2E-C1@@
Fig. 5: E2E-X2D@-N
E2E-X1R5E@/F@
Pre-wired Models
(Shielded)
Pre-wired Models
(Unshielded)
Fig. 6: E2E-X4MD@
E2E-X2ME@/F@
Fig. 7: E2E-X1R5Y@Fig. 8: E2E-X2MY@
Fig. 9: E2E-X3D@-N
E2E-X2E@/F@Fig. 10: E2E-X8MD@
E2E-X5ME@/F@
2.9-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section: 0.14 mm2,
Insulator diameter: 0.9 mm),
Standard length: 2 m
Robotics cable Models: 2.9-dia. vinyl-insulated
round cable with 3 conductors (Conductor cross
section: 0.15 mm2, Insulator diameter: 1.05 mm),
Standard length: 2 m
The cable can be extended up to 100 m (separate
metal conduit).
2.9-dia. vinyl-insulated round cable with 3 conductors
(Conductor cross section: 0.14 mm2, Insulator diameter: 0.9 mm),
Standard length: 2 m
Robotics cable Models: 2.9-dia. vinyl-insulated round cable with
3 conductors (Conductor cross section: 0.15 mm2,
Insulator diameter: 1.05 mm), Standard length: 2 m
The cable can be extended up to 100 m (separate metal conduit).
2.9-dia. vinyl-insulated round cable
with 3 conductors
(Conductor cross section: 0.14 mm2,
Insulator diameter: 0.9 mm),
Standard length: 2 m
Robotics cable Models: 2.9-dia.
vinyl-insulated round cable with
3 conductors (Conductor cross
section: 0.15 mm2, Insulator
diameter: 1.05 mm),
Standard length: 2 m
The cable can be extended up to
100 m (separate metal conduit).
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors (E, F
Models)(Conductor cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
Robotics cable models: 4-dia.
vinyl-insulated round cable with
2 conductors (D Models)/3 conductors (E
Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Note: D Models: Operation indicator (red),
setting indicator (green);
E, F Models: Operation indicator (red)
Note: D Models:
Operation indicator (red),
setting indicator (green);
E, F Models:
Operation indicator (red)
Note: D Models:
Operation indicator (red),
setting indicator (green);
E, F Models:
Operation indicator (red)
Note: D Models: Operation indicator (red),
setting indicator (green);
E, F Models: Operation indicator (red)
4-dia. vinyl-insulated round cable with
2 conductors (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
4-dia. vinyl-insulated round cable with
2 conductors (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(D@S,E, F Models) (Conductor cross section:
0.3 mm2,Insulator diameter: 1.3 mm),
Standard length: 2 m
Robotics cable Models: 4-dia.
vinyl-insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.3 mm2, Insulator
diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended (separate metal conduit)
up to 200 m (control output) or up to 100 m
(dia
g
nostic output).
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(E, F Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
Robotics cable Models: 4-dia.
vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(E Models)(Conductor cross section:
0.3 mm2, Insulator diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
4-dia. vinyl-insulated round cable with
2 conductors (D Models)/3 conductors
(D@S, E, F Models) (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
Robotics cable models: 4-dia.
vinyl-insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.3 mm2, Insulator
diameter: 1.27 mm),
Standard length: 2 m
The cable can be extended (separate metal
conduit) up to 200 m (control output) or up to
100 m (diagnostic output).
Pre-wired e-CON connector Model
1
15
2
3
4
5.9
15.6
Connector:
Product code 37104-3163-000FL
(Sumitomo 3M)
Pre-wired e-CON connector Model
1
15
2
3
4
5.9
15.6
Connector:
Product code 37104-3163-000FL
(Sumitomo 3M)
4 dia. 25
17.5
Operation
indicator
(red)
5.4 dia. 25
17.5
Operation
indicator
(red)
15 dia.
3
13
26
8
7
30
M8 × 1 Indicator
(See note.)
Two clamping
nuts
Toothed
washer
15 dia.
6.1 dia.
36
13
26
8
7
30
M8 × 1 Indicator
(See note.)
Two
clamping nuts
Toothed
washer
15 dia.
3
13
36
8
7
40
M8 × 1 Operation Indicator (red)
Two
clamping nuts
Toothed
washer
15 dia.
6.1 dia.
36
13
36
8
7
40
M8 × 1 Operation
indicator (red)
Two
clamping nuts
Toothed
washer
21 dia.
4
17
33
10
9
38
M12 × 1 Indicator
(See note.)
Two
clamping nuts
Toothed washer
4
815
25
17.5
9.7 dia.
M5 × 0.5
Operation
indicator (red)
Two clamping nuts
Toothed
washer
21 dia.
9 dia.
47
17
33
10
9
38
M12 × 1 Indicator
(See note.)
Two
clamping nuts
Toothed
washer
3±0.1 dia. 27
17
Operation
indicator
(red)
2.4-dia. (7/0.127-dia.) vinyl-insulated round cable
with 3 conductors,
Standard length: 2 m
E2E/E2E2 Cylindrical Proximity Sensor 41
Pre-wired Models
(Shielded)
Pre-wired Models
(Unshielded)
Fig. 11: E2E-X2Y@Fig. 12: E2E-X5MY@
Fig. 13: E2E-X3T1
Fig. 14: E2E-X7D@-N/
E2E-X5E@/F@
E2E-X5Y@/E2E-X7T1
Fig. 15: E2E-X14MD@/
E2E-X10ME@/F@
E2E-X10MY@
Fig. 16: E2E-X10D@-N/
E2E-X10E@/F@
E2E-X10Y@/
E2E-X10T1
Fig. 17: E2E-X20MD@/
E2E-X18ME@/F@
E2E-X18MY@
4-dia. vinyl-insulated round cable with
2 conductors (Conductors cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
4-dia. vinyl-insulated round cable with 2 conductors
(Conductors cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m (separate metal conduit).
Note: Operation indicator (red), setting indicator
(green)
4-dia. vinyl-insulated round cable
with 2 conductors (Conductors
cross section: 0.3 mm2,
Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to
200 m (separate metal conduit).
6-dia. vinyl-insulated round cable with
2 conductors (D, Y, T Models)/3
conductors (D@S, E, F Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm)
Standard length: 2 m
Robotics cable Models: 6-dia. vinyl-
insulated round cable with 2 conductors
(D Models)/3 conductors (E Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm)
Standard length: 2 m
The cable can be extended (separate
metal conduit) up to 200 m (control
output) or up to 100 m (diagnostic
output).
Note: D, T Models: Operation indicator (red),
setting indicator (green);
E, F, Y Models: Operation indicator (red)
Note: D, T Models: Operation indicator (red),
setting indicator (green);
E,F,Y Models: Operation indicator (red)
6-dia. vinyl-insulated round cable with
2 conductors (D, Y, T Models)/3 conductors
(D@S, E, F Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm)
Standard length: 2 m
Robotics cable models: 6-dia. vinyl-insulated
round cable with 2 conductors (D Models)/
3 conductors (E Models) (Conductor cross
section: 0.5 mm2, Insulator diameter: 1.74 mm)
Standard length: 2 m
The cable can be extended (separate metal
conduit) up to 200 m (control output) or up to
100 m (diagnostic output).
Note: D Models: Operation indicator (red),
setting indicator (green);
E, F, Y Models:
Operation indicator (red)
6-dia. vinyl-insulated round
cable with 2 conductors (D, Y, T
Models)/3 conductors (D@S, E, F
Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
Robotics cable Models: 6-dia. vinyl-
insulated round cable with
2 conductors (D Models)/3
conductors (E Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.74 mm),
Standard length: 2 m
The cable can be extended
(separate metal conduit) up to 200 m
(control output) or up to 100 m
(diagnostic output).
Note: D Models:
Operation indicator (red),
setting indicator (green);
E, F, Y Models: Operation indicator (red)
6-dia. vinyl-insulated round cable
with 2 conductors (D, Y, T Models)/3
conductors (D@S, E, F Models)
(Conductor cross section: 0.5 mm2,
Insulator diameter: 1.9 mm),
Standard length: 2 m
Robotics cable Models: 6-dia. vinyl-
insulated round cable with
2 conductors (D Models)/
3 conductors (E Models) (Conductor
cross section: 0.5 mm2,
Insulator diameter: 1.74 mm),
Standard length: 2 m
The cable can be extended
(separate metal conduit) up to 200 m
(control output) or up to 100 m
(diagnostic output).
Pre-wired e-CON connector Model
1
15
2
3
4
5.9
15.6
Connector:
Product code 37104-2206-000FL
(Sumitomo 3M)
Pre-wired e-CON connector Model
1
15
2
3
4
5.9
15.6
Connector:
Product code 37104-2206-000FL
(Sumitomo 3M)
Pre-wired e-CON connector Model
1
15
2
3
4
5.9
15.6
Connector:
Product code
37104-2206-000FL
(Sumitomo 3M)
Pre-wired e-CON connector Model
1
15
2
3
4
5.9
15.6
Connector:
Product code
37104-2206-000FL
(Sumitomo 3M)
21 dia.
4
17
38
10
9
43
M12 × 1 Operation indicator (red)
Two clamping nuts
Toothed washer
21 dia.
9 dia.
47
17
38
10
9
43
M12 × 1 Operation indicator (red)
Two
clamping nuts
Toothed washer
M12 × 1
Indicator (See note.)
Two
clamping nuts
Toothed washer
4
21 dia.
17
55
10
9
60
M18 × 1 Indicator
(See note.)
Two
clamping nuts
Toothed washer
29 dia.
24 4
38
10
12
43
14.8 dia. Indicator
(See note.)
M18 × 1 Two
clamping nuts
Toothed washer
29 dia.
24 4
38
10
12
43
10
M30 × 1.5 Indicator (See note.)
Two clamping nuts
Toothed washer
42 dia.
36 5
43
10
12
48
26.8 dia.
M30 × 1.5 Indicator
(See note.)
Two
clamping nuts
Toothed washer
42 dia.
36 5
43
13 10
12
48
42 E2E/E2E2 Cylindrical Proximity Sensor
Fig. 18: E2E-X2D@-M1(G)
E2E-X1R5E@-M1/F@-M1
M12 Connector Models
(Shielded)
M12 Connector Models
(Unshielded)
Fig. 19: E2E-X4MD@-M1(G)
E2E-X2ME@-M1/F@-M1
Fig. 20: E2E-X3D@-M1(G)
E2E-X2E@-M1/F@-M1
Fig. 21: E2E-X8MD@-M1(G)
E2E-X5ME@-M1/F@-M1
Fig. 22: E2E-X2Y@-M1 Fig. 23: E2E-X5MY@-M1
Fig. 24: E2E-X7D@-M1(G)/E2E-X5E@-M1/F@-M1
E2E-X5Y@-M1
Fig. 25: E2E-X14MD@-M1(G)/E2E-X10ME@-M1/F@-M1
E2E-X10MY@-M1
Fig. 26: E2E-X10D@-M1(G)/E2E-X10E@-M1/F@-M1
E2E-X10Y@-M1 Fig. 27: E2E-X20MD@-M1(G)/E2E-X18ME@-M1/F@-M1
E2E-X18MY@-M1
Toothed washer
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F, Y Model: Operation indicator (red)
15 dia.
3
13
26
8
30
43
M8 × 1
M12 × 1
Indicator (See note.)
Toothed washer
Two clamping nuts
15 dia.
6.1 dia.
3
6
13
26
8
30
43
M8 × 1
M12 × 1
Indicator (See note.)
Two clamping nuts
Toothed washer
21 dia.
4
17
33
10
48
M12 × 1
M12 × 1
Indicator (See note.)
Toothed washer
Two clamping nuts
21 dia.
9 dia.
4
7
17
33
10
48
M12 × 1
M12 × 1
Indicator (See note.)
Toothed washer
Two clamping nuts
21 dia.
4
17
38
10
53
M12 × 1
M12 × 1
Operating indicator (red)
Toothed washer
Two clamping nuts
21 dia.
9 dia.
4
7
17
38
10
53
M12 × 1
M12 × 1
Operation indicator (red)
Toothed washer
Two clamping nuts
29 dia.
4
24
38
10
53
M18 × 1
M12 × 1
Indicator (See note.)
Two clamping nuts
Toothed washer
29 dia.
14.8 dia.
4
10
24
38
10
53
M18 × 1
M12 × 1
Indicator (See note.)
Toothed washer
Two clamping nuts
42 dia.
5
36
43
10
58
M30 × 1.5
M12 × 1
Indicator (See note.)
Two clamping nuts
Toothed washer
42 dia.
26.8 dia.
513
36
43
10
58
M30 × 1.5
M12 × 1
Indicator (See note).
Two clamping nuts
Toothed washer
E2E/E2E2 Cylindrical Proximity Sensor 43
Fig. 36: E2E-CR8@@-M5
M8 (3 pin) Connector Models
(Shielded)
Fig. 37: E2E-X1@@-M5
4 dia.
35 8
25
20
M8 × 1
M8, 3-pin connector M8, 3-pin connecto
r
Operating indicator
M8 × 1
Operating indicator
10 dia. 35
25
20
19.0
Two clamping
nuts
Two toothed washers
M5 × 0.5
Fig. 28: E2E-X2D@-M3G/E2E-X1R5E@-M3/F@-M3
M8 Connector Models
(Shielded)
M8 Connector Models
(Unshielded)
Fig. 29: E2E-X4MD@-M3G/E2E-X2ME@-M3/F@-M3
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
Note: D Models: Operation indicator (red), setting indicator (green)
E, F Model: Operation indicator (red)
15 dia.
3
13
26
8
31
39
M8 × 1
M8 × 1
Indicator (See note.)
Toothed washer
Two clamping nuts
15 dia.
6.1 dia.
3
6
13
26
8
31
39
M8 × 1
M8 × 1
Indicator (See note.)
Toothed washer
Two clamping nuts
Fig. 30: E2E-X3D1-M1GJ
E2E-X3D1-M1J-T
Pre-wired M12 Connector Models
Fig. 31: E2E-X8MD1-M1GJ
Fig. 32: E2E-X7D1-M1GJ
E2E-X7D1-M1J-T
4-dia. vinyl-insulated round cable,
Standard length: 0.3 m
4-dia. vinyl-insulated round cable,
Standard length: 0.3 m
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
21 dia.
4
17
33
10
38 9
M12 × 1 Operation Indicator (red),
setting indicator (green)
Toothed washer
Two clamping nuts
M12 × 1
M12 × 1
M12 × 1
21 dia.
9 dia.
4
7
17
33
10
38 9
M12 × 1 Operation indicator (red),
setting indicator (green)
Toothed washer
Two clamping nuts
29 dia.
4
24
38
10
43 12
M18 × 1 Operation indicator (red),
setting indicator (green)
Toothed washer
Two clamping nuts
44 E2E/E2E2 Cylindrical Proximity Sensor
Dimensions 3 dia. 4 dia. M5 5.4 dia. M8 M12 M18 M30
F (mm) 3.3+0.3/0 dia. 4.2+0.5/0 dia. 5.5+0.5/0 dia. 5.7+0.5/0 dia. 8.5+0.5/0 dia. 12.5+0.5/0 dia. 18.5+0.5/0 dia. 30.5+0.5/0 dia.
Pre-wired M12 Connector Models
Fig. 33: E2E-X14MD1-M1GJ
Fig. 34: E2E-X10D1-M1GJ
E2E-X10D1-M1J-T
Fig. 35: E2E-X20MD1-M1GJ
Mounting Holes
F
29 dia.
14.8 dia.
4
10
24
38
10
43 12
M18 × 1
Operation indicator (red),
setting indicator (green)
Toothed washer
Two clamping nuts
42 dia.
26.8 dia.
513
36
43
10
48 12
M30 × 1.5
Operation indicator (red),
setting indicator (green)
Toothed washer
Two clamping nuts
M12 × 1
M12 × 1
M12 × 1
42 dia.
5
36
43
10
48 12
M30 × 1.5
Operation indicator (red),
setting indicator (green)
Toothed washer
Two clamping nuts
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
6-dia. vinyl-insulated round cable,
Standard length: 0.3 m
E2E/E2E2 Cylindrical Proximity Sensor 45
E2E2
Pre-wired Models
E2E2-X3D@
E2E2-X2@@
E2E2-X8MD@
E2E2-X5M@@
E2E2-X7D@
E2E2-X5@@
E2E2-X14MD@
E2E2-X10M@@
E2E2-X20MD@
E2E2-X18M@@
Indicator (See note.)
Two
clamping nuts
Toothed washer
M12 × 1 Indicator (See note.)
Two clamping nuts
Toothed washer
M12 × 1
M18 × 1
Toothed washer
Two clamping nuts
Indicator (See note.) M18 × 1
Toothed washer
Two clamping nuts
Indicator (See note.)
M30 × 1.5
Toothed washer
Two clamping nuts
Indicator (See note.)
M30 × 1.5
Indicator
(See note.)
Two clamping nuts
Toothed washer
4-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
4-dia. vinyl-insulated round cable with 2
conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.3 mm2, Insulator diameter: 1.3 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
Note: D Models: Operation indicator (red),
setting indicator (green)
B, C, Y Model: Operation indicator (red)
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
6-dia. vinyl-insulated round cable with
2 conductors (D, Y Models)/3 conductors
(B, C Models) (Conductor cross section:
0.5 mm2, Insulator diameter: 1.9 mm),
Standard length: 2 m
The cable can be extended up to 200 m
(separate metal conduit).
E2E2-X10D@@
E2E2-X10@@
21 dia.
17
60
55
410
9
21 dia.
9 dia.
17
60
55
47 10
9
29 dia.
24
65
60
410
12
29 dia.
14.8 dia.
24
65
60
4
10 10
12
42 dia.
36
70
65
510
12
42 dia.
26.8 dia.
36
70
65
5
13 10
12
46 E2E/E2E2 Cylindrical Proximity Sensor
E2E2-X2C@-M1/B@-M1
Connector Models
(Shielded)
Connector Models
(Unshielded)
E2E2-X5MC@-M1/B@-M1
E2E2-X2Y@-M4 E2E2-X5MY@-M4
E2E2-X5C@-M1/B@-M1 E2E2-X10MC@-M1/B@-M1
E2E2-X5Y@-M4 E2E2-X10MY@-M4
10
4
55
70
17
21.dia
M12
x
1 Operation indicator (red)
Two clamping nuts
Toothed washer
M12
x
1
9 dia.
4
55
70
710
17
21 dia.
Operation indicator (red)
Two clamping nuts
Toothed washer
M12
x
1
M12
x
1
9 dia.
4
55
70
710
17
21 dia.
Operation indicator (red)
Two clamping nuts
Toothed washer
1/2-20unf
M12
x
1
10
29 dia.
24 4
60
75
M18
x
1
Operation indicator (red)
Two clamping nuts
Toothed washer
M12
x
1
10
29 dia.
24 4
60
75
M18
x
1
Operation indicator (red)
Two clamping nuts
Toothed washer
1/2-20unf
10
4
55
70
17
21.dia
M12
x
1 Operation indicator (red)
Two clamping nuts
Toothed washer
1/2-20unf
29 dia
24 10
4
60
75
10
14.8 dia.
M18 x 1
M12 x 1
Operation indicator (red)
Two clamping nuts
Toothed washer
29 dia
24 10
4
60
75
10
14.8 dia.
M18
x
1
1/2-20unf
Operation indicator (red)
Two clamping nuts
Toothed washer
E2E/E2E2 Cylindrical Proximity Sensor 47
E2E2-X10C@-M1/B@-M1
Connector Models
(Shielded)
Connector Models
(Unshielded)
E2E2-X18MC@-M1/B@-M1
E2E2-X10Y@-M4 E2E2-X18MY@-M4
Mounting Holes
F
65
5
80
42 dia.
36 10
M30 x 1.5
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 x 1
65
5
80
42 dia.
36 10
M30 x 1.5
Operation indicator (red)
Two clamping nuts
Toothed washer
1/2-20unf
10
5
13
65
80
36
42 dia.
26.8 dia.
M30 x 1.5
Operation indicator (red)
Two clamping nuts
Toothed washer
M12 x 1
10
5
13
65
80
36
42 dia.
26.8 dia.
M30 x 1.5
Operation indicator (red)
Two clamping nuts
Toothed washer
1/2-20unf
Dimensions M12 M18 M30
F (mm) 12.5 dia. 18.5 dia. 30.5 dia.
+0.5
0+0.5
0+0.5
0
2007.7
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
In the interest of product improvement, specifications are subject to change without notice.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specifi ed) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE
HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL
LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR
STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the product.
At the customer's request, OMRON will provide applicable third party certifi cation documents identifying ratings and limitations of use that apply to the
products. This information by itself is not suffi cient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifi cations and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when signifi cant construction changes are made.
However, some specifi cations of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fi x
or establish key specifi cations for your application on your request. Please consult with your OMRON representative at any time to confi rm act u a l
specifi cations of purchased product.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent
the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This catalog shall not be copied for sales or promotions without permission.
This catalog is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this
catalog in any manner, for any other purpose. If copying or transmitting this catalog to another, please copy or transmit it in its entirety.
Cat. No. D058-E1-04
