Emboss Tape SHD CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- 11 * Current rating: 1.0A AC, DC (AWG #28) * Voltage rating: 50V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/20m max. After environmental testing/40m max. * Insulation resistance: 100M min. * Withstanding voltage: 500V AC/minute * Applicable wire: Conductor size/AWG #32 to #28 Insulation O.D./0.4 to 0.8mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. 21 31 39 The SHD connector is compact with a mounting height of 6.3mm for top entry type and 5.5mm for side entry type, and a width of 5.0mm for top entry type and 5.1mm for side entry type. * Compact, low profile design * Anti-misinsertion feature * Receptacles with protrusions * Header designed for vacuum pick and place robotics Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from component side) and Assembly layout Side entry type 0.850.1 1.80.1 0.90.1 0.6 1.00.1 Circuit No.1 0.5 0.9 0.850.1 1.6 0.90.1 with a boss 1.80.1 0.6 6.3 1.0 0.1 4.1 Header outline Circuit No.1 7.1 1.6 4.0 7.2 5.4 5.5 Top entry type Header outline 1.5 1.250.1 0.850.1 5.1 0.7 0.7 1.90.1 4.0 7.2 1.80.1 1.5 0.5 0.850.1 Header outline 0.550.05 0 Circuit No.1 1.00.1 0.6 0.7 5.0 0.7 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. Note: 2. The dimensions above should serve as a guideline. Contact JST for details. Contact Model No. mm2 3.9 0.5 SSH-003GA-P0.2 1.6 1.55 2.0 Applicable wire Insulation O.D. (mm) AWG# 0.0320.08 3228 0.40.8 Q'ty / reel 23,000 Material and Finish 0.8 1.35 Phosphor bronze, nickel-undercoated, Mating part; gold-plated RoHS compliance Note: Contact JST for tin-plated products. 0.45 0.8 Contact Crimping machine Crimp applicator SSH-003GA-P0.2 AP-K2N Applicator Dies Crimp applicator with dies MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHD CONNECTOR Housing C A 1.0 Circuit No.3 4.9 5.0 No.1 mark Circuits Model No. 20 30 Dimensions (mm) Q'ty / box A B C SHDR-20V-S-B 9.0 11.2 13.0 4,000 SHDR-30V-S-B 14.0 16.2 18.0 4,000 40 SHDR-40V-S-B 19.0 21.2 23.0 2,000 50 SHDR-50V-S-B 24.0 26.2 28.0 2,000 Material PBT, UL94V-0, natural (white) 4.2 B RoHS compliance Shrouded header Top entry type Circuits 20 30 40 4.25 50 Circuits 1.0 0.2 1.5 A B Circuit No.3 Circuit No.1 5.0 20 0.7 30 40 50 Model No. Top entry type BM20B-SRDS-G-TF BM30B-SRDS-G-TF BM40B-SRDS-G-TF BM50B-SRDS-G-TF Dimensions (mm) A B Model No. Side entry type Dimensions (mm) A B SM20B-SRDS-G-TF SM30B-SRDS-G-TF SM40B-SRDS-G-TF SM50B-SRDS-G-TF Q'ty / reel 9.0 12.3 1,500 14.0 17.3 1,500 19.0 22.3 1,500 24.0 27.3 1,500 Q'ty / reel 9.0 13.1 1,250 14.0 18.1 1,250 19.0 23.1 1,250 24.0 28.1 1,250 Material and Finish Side entry type Header contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Circuit No.3 Circuit No.1 RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the headers with tin-plated pins. 3. Contact JST for the top entry type headers with suction cap. 5.5 H JST 1.0 0.2 1.5 A B 5.1 0.7 4.25 Top entry type with a boss 0.2 A Circuit No.1 B Circuit No.3 0.5 0.85 Model No. 20 BM20B-SRDS-A-G-TF 19.0 12.3 1,250 30 BM30B-SRDS-A-G-TF 14.0 17.3 1,250 40 BM40B-SRDS-A-G-TF 19.0 22.3 1,250 50 BM50B-SRDS-A-G-TF 24.0 27.3 1,250 Q'ty / reel Material and Finish 0.6 1.0 Dimensions (mm) A B Circuits Header contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) 1.9 1.5 5.0 0.7 RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for the headers with tin-plated pins. 2