1
11 21 31 39
SHD CONNECTOR
1.0mm pitch/Disconnectable Crimp style connectors
Emboss Tape
1.5
6.3
5.4
5.00.7 0.7
1.0±0.1
0.85±0.1
1.9±0.1
φ0.55＋0.05
0.9±0.1 0.85±0.1
1.8±0.1
4.0
7.2
0.5
0.6
Circuit
No.1
0
1.0±0.1
0.9±0.1 0.85±0.1
1.8±0.1
4.0
7.2
0.5
0.6
Header
outline
Header
outline
Circuit
No.1
1.5 5.1
7.1
0.70.7
5.5
1.25±0.1 0.85±0.1
1.6 4.1 1.6
0.9
1.8
±0.1
0.6 Circuit No.1
Header
outline
1.0±0.1
• Compact, low profile design
• Anti-misinsertion feature
• Receptacles with protrusions
•
Header designed for vacuum pick and place robotics
The SHD connector is compact with a
mounting height of 6.3mm for top entry
type and 5.5mm for side entry type, and a
width of 5.0mm for top entry type and
5.1mm for side entry type.
PC board layout (viewed from component side) and Assembly layout
Note: 1. Tolerances are non-cumulative:
±
0.05mm for all centers.
Note: 2. The dimensions above should serve as a guideline. Contact JST for details.
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC (AWG #28)
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ωmax.
After environmental testing/40m Ωmax.
• Insulation resistance: 100M Ωmin.
• Withstanding voltage: 500V AC/minute
• Applicable wire: Conductor size/AWG #32 to #28
Insulation O.D./0.4 to 0.8mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0Recognized E60389
1Certified LR20812
0.8
0.5
2.0
3.9
1.6
0.8
0.45
1.55
1.35
SSH-003GA-P0.2 0.032〜0.08 32〜28 0.4〜0.8 23,000
Material and Finish
Model No. Applicable wire Q'ty /
reelmm2AWG#
Insulation O.D. (mm)
Phosphor bronze, nickel-undercoated, Mating part; gold-plated
Contact
Crimping
machine
AP-K2N MKS-L-10-3
*MKS-SC
MK/SSH/L-003-02
SC/SSH/L-003-02
Applicator
Crimpapplicator Dies
APLMK SSH/L003-02
APLSC SSH/L003-02
Crimpapplicatorwithdies
SSH-003GA-P0.2
Contact
RoHS compliance
Note: Contact JST for tin-plated products.
Note: *Strip-crimp applicator
Contact JST for applicable wires in case that it is not usable due to wire size.
Top entry type Side entry type
with a boss
2
SHD CONNECTOR
4.9
4.2
5.0
B
C
A
1.0
CircuitNo.3
No.1 mark
C
20
30
40
50
SHDR-20V-S-B
SHDR-30V-S-B
SHDR-40V-S-B
SHDR-50V-S-B
A
9.0
14.0
19.0
24.0
13.0
18.0
23.0
28.0
4,000
4,000
2,000
2,000
B
11.2
16.2
21.2
26.2
Circuits Model No.
Material
PBT, UL94V-0, natural (white)
Q'ty / box
Dimensions (mm)
1.0 0.2
B
A1.5
4.25
5.0 0.7
CircuitNo.3
CircuitNo.1
1.0 0.2
B
A1.5
5.1 0.7
H JST
CircuitNo.1
5.5
CircuitNo.3
Side entry type
5.0
4.25
1.5
1.9
0.6
φ0.5
0.85
B
A
1.0 0.2
0.7
CircuitNo.3
CircuitNo.1
Top entry type with a boss
Top entry type
Material and Finish
20
30
40
50
BM20B-SRDS-G-TF
BM30B-SRDS-G-TF
BM40B-SRDS-G-TF
BM50B-SRDS-G-TF
9.0
14.0
19.0
24.0
12.3
17.3
22.3
27.3
1,500
1,500
1,500
1,500
SM20B-SRDS-G-TF
SM30B-SRDS-G-TF
SM40B-SRDS-G-TF
SM50B-SRDS-G-TF
9.020 13.1 1,250
14.030 18.1 1,250
19.040 23.1 1,250
24.050 28.1 1,250
Circuits
Model No.
Dimensions (mm)
ABTop entry type Q'ty / reel
Header contact: Phosphor bronze, nickel-undercoated, gold-plated
Wafer: PA, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
Circuits
Model No.
Dimensions (mm)
ABSide entry type Q'ty / reel
B
20 19.0 12.3 1,250
30 14.0 17.3 1,250
40 19.0 22.3 1,250
50 24.0 27.3 1,250
A
BM20B-SRDS-A-G-TF
BM30B-SRDS-A-G-TF
BM40B-SRDS-A-G-TF
BM50B-SRDS-A-G-TF
Circuits
Q'ty / reel
Dimensions (mm)
Model No.
Material and Finish
Header contact: Phosphor bronze, nickel-undercoated, gold-plated
Wafer: PA, UL94V-0, natural (ivory)
Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment)
Housing
RoHS compliance
Shrouded header
RoHS compliance This product displays (LF)(SN) on a label.
Note: 1. The products listed above are supplied on embossed-tape.
2. Contact JST for the headers with tin-plated pins.
3. Contact JST for the top entry type headers with suction cap.
RoHS compliance This product displays (LF)(SN) on a label.
Note: 1. The products listed above are supplied on embossed-tape.
2. Contact JST for the headers with tin-plated pins.