The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Power Supply Connectors For Industrial Equipment PX Series Structure prevents mis-insertion Key Shape of opening prevents reverse insertion Features Reliable contact structure 1. Power supply connector for high-current retainer Withstands voltage of 2200V AC max. and 10A/contact (60A/6contacts) of rating current. 2. Housing design prevents incorrect insertion Opening section is designed to prevent reverse insertion and mating direction is easily checked. Additionally, the opening section is keyed to prevent misalignment of plugs in parallel applications. Sealing section (3 contacts) As this window is opened, contact section can easily be checked. Wall structure prevents retainer deformation 16-18 Contact spring guard section 3. Reduced Size Applicable Wire Size (AWG No.) Since the retainer portion is lowered by onestep, the possibility of spring deformation is minimized even if the lock is released. When compared to traditional products, Hirose's plug is smaller in size by 65% and the receptacle is smaller by 55%. 4. Reliable contact structure Three point contact Gold plated contacts (standard) with high-level environmental resistance Contact spring guard structure Structure prevents retainer deformation Label space 5. Easy Cable Assembly Use of dedicated crimping tools will make harness work easier.One tool crimps both AWG#16 and AWG#18 wire. Positive lock can be felt on contact insertion. Release of contact lock can easily be performed with dedicated jig, which facilitates the wiring modification after assembly. Avoid any short between adjacent contacts Two layer structure enables high-density mounting. 2006.3 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Product Specifications Operating temperature range -55c~+105c Voltage rating 600V AC Current rating 10A Ratings Description Specifications Requirements 1.Contact resistance 10mo max. 100mA 2.Insulation resistance 1000Mo min. 500V DC 3.Withstanding voltage No flashover or insulation breakdown. 2200V AC / 1 minute. 4.Durability Contact resistance : 20mo max. No damage, cracks or looseness of parts 1000 cycles 5.Vibration No electrical discontinuity of 10s or more. Contact resistance : 20mo max. No damage, cracks or looseness of parts 6.Shock Frequency:10 to 55Hz,single amplitude of 0.75mm, 2 hours,3axis Acceleration: 490m/s2 Duration: 11ms Test at sine half-wave, 3 axes, bi-directional three times, respectively. 7.Temperature cycle Contact resistance : 20mo max. Insulation resistance : 1000Mo min. No damage, cracks or looseness of parts Temperature : -55/+5~+35/+85/+5~+35c 10~15Minutes Time : -30/+10~+15/+30/+ 5 cycles 8.Humidity Contact resistance : 20mo max. Insulation resistance : 1000Mo min. No damage, cracks or looseness of parts 96 hours at 402c and humidity of 90~95% 9.Salt spray No corrosions 5% salt water for 48 hours Materials Parts Material Finish Contacts Copper alloy Gold plating Insulator PBT (UL94V-0) Metal fixture Copper alloy Tin reflow plating BComparison In Size With Conventional Equivalent (mm) depth 4 5 6 depth 3 width width 12 A F F A F A height 7 height 27.18 2 27.4 1 Depth A 18.47 1 14.8 7 Height 2 39.40 8 22.80 28.0 PX10 AF6WP 23.0 Width 3 Depth 9 07.15 4 07.0 10 Height 5 44.94 11 34.2 Receptacle 6 Width Plug 12 Receptacle A company-made PX50-AF6S Plug PX R S For volume ratio, plug is downsized to : nearly 65%; and receptacle : nearly 55%. 2 1 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Receptacles 6position/2row Type Part No. PX10-AF6WP(50) BDimensions For Circuit Board CL No. 236-0001-0-50 RoHS YES BPCB mounting pattern Installation(For your reference) t=1.6~2.4 Where t=1.6 (Setting value depends on thickness of boards.) 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 4Position/2 Row Type Part No. PX10-AD4WP(50) CL No. 236-0005-0-50 RoHS YES 7 8 3 4 6 5 2 1 27.4 PX10 AD4WP Label space size 17.210.2 25.2 21.2 terminal No.5 5 terminal No.8 D A D A 8 14.8 S 1 4 terminal No.4 3.4 3.8 10.2 8.4 22.8 8 BDimensions For Circuit Board Installation(For your reference) 10.2 09 terminal No.4 terminal No.1 terminal No.3 5. terminal No.7 terminal No.2 P= 3.8 terminal No.8 terminal No.5 11.4 terminal No.6 5. (6) (8) 3.7 6.7 .75 R0 ( 09 board end (through-hole) connector position 22.8 Where t=1.6 (Setting value depends on thickness of boards.) 4 11.4 BPCB mounting pattern t=1.6~2.4 P=3.4 1.4 8-O -hole) h g u 1.5 thro 6.7 4.5 terminal No.1 4.1 7.3 R The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Plug 6-Position Part No. PX50-AF6S 4-Position Type CL No. 236-0002-2 RoHS YES Type terminal No.2 terminal No.1 terminal No.3 terminal No.4 D A Part No. PX50-AD4S CL No. 236-0006-3 RoHS YES 1 2 3 4 PX50 --- AD4S 23 21.5 A (This picture shows the state of cable insertion.) 7 21.2 27.4 Label space size 11.66.1 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Simple-Type Plug Holder Cover For 6-Position Type Part No. PX-6WS-CV For CL No. 236-0004-8 RoHS YES 4-Position Type 15.9 A Part No. PX-4WS-CV CL No. 236-0007-6 RoHS YES BInstallation status 10.6 22.8 PX4WS-CV Label Space Size 17.26.1 BInstallation method 6-Position Type 4-Position Type PX50-AD4S (2-layerd) D A D A A 1 2 3 4 PX4WS-CV <Caution>The holder cover is not a rugged support fixture but only meant for alignment of the plugs. If external force is imposed by pulling of cables, etc. before mating, please bundle all cables together around the connector with union bands, etc. 6 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Crimp contact Applicable wire size 16, 18 Packaging Part No. CL No. Quantity Reel PX50-SC-231 236-0003-5 5,000 Bag PX50-SC-131 236-0008-9 200 RoHS YES Please order by integral multiple of the packing volume. Tools Type Automatic Manual Description Press unit CM-105 901-0005-4 Applicator AP105-PX50-3 901-2573-8 Hand tool () HT104/PX50-3 250-0229-4 PX50-SC-TC 250-0233-1 Contact extraction tool Part No. CL No. Applicable contacts PX50-SC-231 PX50-SC-131 PX50-SC-31 For our manual crimping tools, we employ the rotate-replace procedure to use the crimper depending on wire size. Applicable AWG size Rotate to set the crimper such that applicable AWG size fits the crimping section. Note : Since manual crimping tool cannot provide fine adjustment of crimp height, please use the proper crimp height of auto crimper in crimping of the wires other than specified ones 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Crimp Terminal Drawing Jig Part No. PX-50-SC-TC PX50-SC-TC CL No. 250-0233-1 RoHS YES CL250-0233-1 <WARNING> When the crimp terminal drawing jig is inserted and pushed from the fitting section of a connector as shown below, retainer lock of the terminal will be released. Then please extract the cable. If the retainer is too lowered after extracting terminal, put it in a former position and reinsert. Position and direction of the jig top to be inserted are as shown in the Figures below. Be careful that any mistake will lead to the damage of terminal. How To Extract Crimp Terminal Insert the jig top into the peak of convex section on terminal hole. (R) 8 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: PX10-AD4WP(50) PX10-AF6WP(50) PX50-SC-131(50) PX-4WS-CV