www.apem.com
APEM
Features
•
6mm panel mounting LED indicator
•
3mm colored diffused epoxy lens or 3mm water clear super bright LEDs
•
• Prominent, recessed and flush bezel styles
• 2VDC – 28VDC
• (2.0 x 0.5) solder lug terminals, pins or (200mm long) wire terminations
• IP67 sealing option (EN60529)
• Supplied with fixing nut and spring washer
NB: UL Recognized Component
Q SERIES Ø6mm (.236") Panel Mount LED Indicators
Distinctive features and specification
PANEL CUTOUT
Ø 6.00 +0.15/-0.0
Standard LED Intensity Prominent and RecessedFlush Forward Voltage
HE Red 40mcd 10mcd 2.0V
Green 50mcd 12mcd 2.2V
Yellow 30mcd 6mcd 2.1V
Blue 1,200mcd 100mcd 3.8V
White 1,200mcd 160mcd 3.8V
Orange 60mcd 10mcd 2.0V
Bi-color (Typical) (Red/Green) 20/15mcd 10/8mcd 2.0V/2.2V
The color is changed by reversing the polarity of the supply voltage.
Super Bright LED Prominent and Recessed Flush Forward Voltage
HE Red 1,000mcd 700mcd 2.2V
Green 1,200mcd 2,000mcd 3.5V
Yellow 2000mcd 8,000mcd 2.3V
Blue 1,600mcd 200mcd 3.3V
White 1,200mcd 350mcd 3.3V
Orange 10,000mcd 500mcd 2.2V
Hyper Bright LED Prominent and Recessed Flush Forward Voltage
HE Red 3,700mcd 600mcd 2.2V
Green 2,000mcd 350mcd 3.2V
Yellow 1,200mcd 140mcd 2.0V
Orange
4,500mcd
400mcd 2.2V
Luminous intensity will be reduced with lower operating current.
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
TECHNICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
02 (No Resistor) 1.8 to 3.8VDC 20mA max*
6VDC 5.4 to 6.6VDC 20mA
12VDC 10.8 to 13.2VDC 20mA
24VAC/DC 21.6 to 26.4VDC 20mA
28VDC 25.2 to 30.8VDC 20mA
Max Reverse Voltage: 5V
Viewing Angle: 30–100° (dependant on model)
Life Expectancy: 100,000 hours
Temperature Range: –40 to +85°C (operating & storage)
Torque: 4cNm
8,00 0,315 AF
2,00 0,079
M6 x 0,50 THREAD
1
Q6_VOY1609R1US
Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
www.apem.com APEM
Q SERIES Ø6mm (.236") Panel Mount LED Indicators
Technical Drawings
PROMINENT BEZEL
RECESSED BEZEL
REAR EPOXY PINS
REAR EPOXY PINS
PINS
PINS
SHORT BODY WIRES
SHORT BODY WIRES
SHORT BODY PINS
SHORT BODY PINS
REAR EPOXY WIRES
REAR EPOXY WIRES
WIRES
WIRES
SOLDER LUG
SOLDER LUG
2
3,50 0,138
7,00
[0,275]
2,0x0,5[0,078x0,02]
M6x0,5
23,10 0,909
6,00 0,236
8,75 0,344
17,10 0,673
3,50 0,138
7,00 [0,275]
M6x0,5
1,25 0,049
1,25 0,049
9,50 0,374
11,00 0,4338,75 0,344
0,50 0,020
17,10 0,673
3,50 0,138
7,00
[0,275]
M6x0,5
200,0+/-10
[7,874+/-0,393]
8,75 0,344
7,00
[0,275]
3,50 0,138
8,75 0,344
10,00 0,394
16,60 0,654
18,98 0,747
0,50 0,020
1,25 0,049
1,25 0,049
7,00
[0,275]
3,50 0,138
8,75 0,344
10,00 0,394
M6 x0,5
200,00+/-10
[7,874+/-0,393]
12,00 0,472
3,50 0,138
7,00
[0,275]
9,50 0,374
11,00 0,433
1,25 0,049
1,25 0,049
M6x0,5
8,75 0,344
0,50 0,020
12,00 0,472
M6x0,5
3,50 0,138
7,00
[0,275]
200,0+/-10
[7,874+/-0,393]
8,75 0,344
2,25 0,089
7,00
[0,275]
6,00 0,236
2,0x0,5[0,078x0,02]
M6x0,5
8,75 0,344
24,75 0,974
18,75 0,738
2,25 0,089
7,00[0,275]
M6x0,5
9,50 0,374
11,00 0,433
1,25 0,049
1,25 0,049
8,75 0,344
0,50 0,020
18,75 0,738
2,25 0,089
7,00
[0,275]
M6x0,5
200,0+/-10
[7,874+/-0,393]
8,75 0,344
7,00
[0,275]
2,25 0,089
8,75 0,344
11,65 0,459
16,60 0,654
18,10 0,713
0,50 0,020
1,25 0,049
1,25 0,049
M6 x0,5
7,00
[0,275]
2,25 0,089
8,75 0,344
11,65 0,459
M6 x0,5
200,0+/-10
[7,874+/-0,393]
13,65 0,537
2,25 0,089
7,00
[0,275]
M6x0,5
8,75 0,344 14,60 0,575
16,98 0,668
0,50 0,020
1,25 0,049
1,25 0,049
7,00
[0,275]
2,25 0,089
13,65 0,537
M6x0,5
200,0+/-10
[7,874+/-0,393]
8,75 0,345
www.apem.com
FLUSH BEZEL
Q SERIES Ø6mm (.236") Panel Mount LED Indicators
Technical Drawings
REAR EPOXY PINS
PINS
SHORT BODY WIRESSHORT BODY PINSREAR EPOXY WIRES
WIRES
SOLDER LUG
3
APEM
27,00 1,063
1,00 0,039
7,00
[0,275]
6,00 0,236
M6x0,5
2,0x0,5 [0.078x0.02]
8,75 0,344
7,00 [0,275]
21,00 0,827
1,00 0,039
M6x0,5
9,50 0,374
11,00 0,433
1,25 0,049
1,25 0,049
0,50 0,020
8,75 0,344
1,00 0,039
7,00 [0,275]
M6x0,5
200,0 +/-10
[7,874+/-0,393]
8,75 0,344
21,00 0,827
7,00
[0,275]
1,00 0,039
8,75 0,344
13,90 0,547
16,60 0,654
18,10 0,713
2,50 0,098
1,25 0,049
M6 x0,5
0,50 0,020
7,00
[0,275]
1,00 0,039
8,75 0,344
13,90 0,547
M6 x0,5
200,0+/-10
[7,874+/-0,393]
15,90 0,626
1,00 ,039
7,00 [0,275]
1,25 0,049
1,25 0,049
M6x0,5
0,50 0,020
9,50 0,374
11,00 0,433
8,75 0,344
7,00
[0,275]
15,90 0,626
1,00 0,039 200,0 +/-10
[7,874 +/- 0,393]
M6x0,5
8,75 0,344
4www.apem.com
STANDARD OPTIONS
Q 6 P 1 B XX G 12 E
• Gold solder lug terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG UL 1061, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternative voltages consult APEM
• Bi-color LEDs, by connecting the gold solder lug (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28V in DC only.
• Take care when soldering to the terminals (recommended solder temperature 300°C - 3 sec)
• Short body options are only available up to 24VDC
• Maximum panel thickness 7mm
Q
Example Q6F3CXXB12E
Ø6mm, flush bezel, wire terminals
bright chrome finish, fixed light,
blue, 12VDC LED, IP67 panel sealed
1 = Solder Lug
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
C = Bright Chrome
B = Black Chrome
G = Satin Grey
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
SO = Super Bright Orange
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
02 = no resistor*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(12V – 28VDC)
YY = Bi-color
SERIES MOUNTING
HOLE
6 = Ø6mm P = Prominent
R = Recessed
F = Flush
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOR VOLTAGE SEALING
The Q6 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
Q SERIES Ø6mm (.236") Panel Mount LED Indicators
Overview
APEM
* = For resistorless versions (02) please refer to the forward voltage on page 1
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
Q6F1CXXB12 Q6F1CXXB24 Q6F1CXXG12 Q6F1CXXG24 Q6F1CXXR12 Q6F1CXXR24 Q6F1CXXW12
Q6F1CXXW24 Q6F1CXXY12 Q6F1CXXY24 Q6P1BXXR12 Q6P1CKKR12 Q6P1CXXB12 Q6P1CXXB24
Q6P1CXXG12 Q6P1CXXG24 Q6P1CXXR02 Q6P1CXXR12 Q6P1CXXR24 Q6P1CXXSB12 Q6P1CXXSG12
Q6P1CXXSR12 Q6P1CXXSW12 Q6P1CXXSY12 Q6P1CXXW12 Q6P1CXXW24 Q6P1CXXY12 Q6P1CXXY24
Q6P1GXXR12 Q6P3CXXR12 Q6R1CXXB12 Q6R1CXXB24 Q6R1CXXG12 Q6R1CXXG24 Q6R1CXXR12
Q6R1CXXR24 Q6R1CXXW12 Q6R1CXXW24 Q6R1CXXY12 Q6R1CXXY24 Q6P1CXXY12E Q6F1CXXG24E
Q6P1CXXG24E Q6P1CXXR24E Q6P1CXXR12E Q6F1CXXY24E Q6F1CXXR24E Q6F1CXXR12E Q6F1CXXG12E
Q6F1CXXY12E Q6P1CXXY24E Q6P1CXXG12E Q6F1BXXB12E Q6F1BXXB24E Q6F1BXXG12E Q6F1BXXG24E
Q6F1BXXR12E Q6F1BXXR24E Q6F1BXXW12E Q6F1BXXW24E Q6F1BXXY12E Q6F1BXXY24E
Q6F1CXXB12E Q6F1CXXB24E Q6F1CXXW12E Q6F1CXXW24E Q6P1BXXB12E Q6P1BXXB24E Q6P1BXXG12E
Q6P1BXXG24E Q6P1BXXR12E Q6P1BXXR24E Q6P1BXXW12E Q6P1BXXW24E Q6P1BXXY12E
Q6P1BXXY24E Q6P1CXXB12E Q6P1CXXB24E Q6P1CXXW12E Q6P1CXXW24E Q6R1BXXB12E Q6R1BXXB24E
Q6R1BXXG12E Q6R1BXXG24E Q6R1BXXR12E Q6R1BXXR24E Q6R1BXXW12E Q6R1BXXW24E
Q6R1BXXY12E Q6R1BXXY24E Q6R1CXXB12E Q6R1CXXB24E Q6R1CXXG12E Q6R1CXXG24E Q6R1CXXR12E
Q6R1CXXR24E Q6R1CXXW12E Q6R1CXXW24E Q6R1CXXY12E Q6R1CXXY24E
