General Description
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
family of micropower op amps operate from a single
+1.8V to +5.5V supply and draw only 750nA of supply
current. The MAX4470 family feature ground-sensing
inputs and rail-to-rail output. The ultra-low supply cur-
rent, low-operating voltage, and rail-to-rail output capa-
bilities make these operational amplifiers ideal for use
in single lithium ion (Li+), or two-cell NiCd or alkaline
battery systems.
The rail-to-rail output stage of the MAX4464/MAX4470/
MAX4471/MAX4472/MAX4474 amplifiers is capable of
driving the output voltage to within 4mV of the rail with a
100kΩload, and can sink and source 11mA with a +5V
supply. These amplifiers are available in both fully com-
pensated and decompensated versions. The single
MAX4470, dual MAX4471, and the quad MAX4472 are
unity-gain stable. The single MAX4464 and the dual
MAX4474 are stable for closed-loop gain configurations
of ≥+5V/V. These amplifiers are available in space-sav-
ing WLP, SC70, SOT23, µMAX®, and TSSOP packages.
Applications
Features
oUltra-Low 750nA Supply Current Per Amplifier
oUltra-Low +1.8V Supply Voltage Operation
oGround-Sensing Input Common-Mode Range
oOutputs Swing Rail-to-Rail
oOutputs Source and Sink 11mA of Load Current
oNo Phase Reversal for Overdriven Inputs
oHigh 120dB Open-Loop Voltage Gain
oLow 500µV Input Offset Voltage
o9kHz Gain-Bandwidth Product
(MAX4470/MAX4471/MAX4472)
o40kHz Gain-Bandwidth Product
(MAX4464/MAX4474)
o250pF (min) Capacitive Load Capability
oAvailable in Tiny, 6-Bump WLP, 5-Pin SC70, and
8-Pin SOT23 Packages
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
________________________________________________________________
Maxim Integrated Products
1
MAX4470
WLP BUMP
SIDE DOWN
OUT N.C.
IN- VDD
IN+ VSS
C1 C2
B1 B2
A2A1
+
Pin Configurations
PART NO. OF
AMPLIFIERS
GAIN-
BANDWIDTH
MINIMUM
STABLE GAIN
MAX4464
1 40kHz 5V/V
MAX4470
1 9kHz 1V/V
MAX4471
2 9kHz 1V/V
MAX4472
4 9kHz 1V/V
MAX4474
2 40kHz 5V/V
19-2021; Rev 4; 7/11
Ordering Information
µMAX is a registered trademark of Maxim Integrated Products, Inc.
PART TEMP
RANGE
PIN-
PACKAGE
TOP
MARK
MAX4464EXK+T -40°C to +85°C 5 SC70 +ABT
MAX4464EUK+T -40°C to +85°C 5 SOT23 +ADPI
MAX4470EXK+T -40°C to +85°C 5 SC70 +ABS
MAX4470EUK+T -40°C to +85°C 5 SOT23 +ADPH
MAX4470EWT+ -40°C to +85°C 6 WLP +BP
MAX4471EKA+T -40°C to +85°C 8 SOT23 +AAEK
MAX4471ESA+ -40°C to +85°C 8 SO —
MAX4472EUD+ -40°C to +85°C 14 TSSOP —
MAX4472ESD+ -40°C to +85°C 14 SO —
MAX4474EKA+T -40°C to +85°C 8 SOT23 +AAEL
MAX4474EUA+ -40°C to +85°C 8 µMAX —
MAX4474ESA+ -40°C to +85°C8 SO —
Pin Configurations continued at end of data sheet.
Selector Guide
Battery-Powered
Systems
Portable Instrumentation
Pagers and Cellphones
Micropower
Thermostats
Electrometer Amplifiers
Solar-Powered Systems
Remote Sensor Active
Badges
pH Meters
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
+
Denotes a lead(Pb)-free/RoHS-compliant package.
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(VDD = +5V, VSS = 0V, VCM = 0V, VOUT = VDD/2, RL= ∞to VDD/2, TA= +25°C, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
VDD to VSS ...............................................................-0.3V to +6V
IN_+ or IN_-......................................(VSS - 0.3V) to (VDD + 0.3V)
OUT_ Shorted to VSS or VDD......................................Continuous
Continuous Power Dissipation (TA= +70°C)
5-Pin SC70 (derate 3.1mW/°C above +70°C)...................247mW
5-Pin SOT23 (derate 7.1mW/°C above +70°C).................571mW
6-Bump WLP (derate 10.5mW/°C above +70°C) .............840mW
8-Pin SOT23 (derate 8.9mW/°C above +70°C).................714mW
8-Pin µMAX (derate 4.5mW/°C above +70°C) ..................362mW
8-Pin SO (derate 5.88mW/°C above +70°C)....................471mW
14-Pin TSSOP (derate 9.1mW/°C above +70°C) ...........727mW
14-Pin SO (derate 8.33mW/°C above +70°C)...............667mW
Operating Temperature Range ......................... -40°C to +85°C
Junction Temperature .....................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................+300°C
Soldering Temperature (reflow) ......................................+260°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage Range VDD Guaranteed by PSRR tests 1.8 5.5 V
VDD = +1.8V 0.6
Supply Current (Per
Amplifier) IDD VDD = +5.0V 0.75 1.2 µA
Input Offset Voltage VOS ±0.5 ±7.0 mV
Input Bias Current IB±200 ±1500 pA
Input Offset Current IOS ±12.5 pA
Input Common-Mode
Voltage Range VCM Guaranteed by the CMRR test VSS VDD -
1.1 V
Common-Mode Rejection
Ratio CMRR Specified with VSS ≤ VCM ≤ (VDD - 1.1V) 70 95 dB
Power-Supply Rejection
Ratio PSRR +1.8V ≤ VDD ≤ +5.5V 70 90 dB
RL = 1MΩ, VOUT = 50mV to VDD - 50mV 90 120
RL = 100kΩ, VOUT = 200mV to VDD - 200mV 90 112
Large-Signal Voltage Gain AVOL
RL = 10kΩ, VOUT = 200mV to VDD - 200mV 100
dB
RL = 1MΩ14
RL = 100kΩ410VOH
Swing high
specified as
VDD - VOH RL = 10kΩ40
RL = 1MΩ0.5 5
RL = 100kΩ15
Output Voltage Swing
VOL
Swing low
specified as
VOL - VSS RL = 10kΩ10
mV
MAX4470/MAX4471/MAX4472 9
Gain-Bandwidth Product GBW MAX4464/MAX4474 40 kHz
MAX4470/MAX4471/MAX4472 90
Phase Margin φMMAX4464/MAX4474 80 d eg r ees
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
_______________________________________________________________________________________ 3
Note 1: All devices are production tested at TA= +25°C. All temperature limits are guaranteed by design.
ELECTRICAL CHARACTERISTICS (continued)
(VDD = +5V, VSS = 0V, VCM = 0V, VOUT = VDD/2, RL= ∞to VDD/2, TA= +25°C, unless otherwise noted.)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
MAX4470/MAX4471/MAX4472 2
Slew Rate SR VOUT =
4V step MAX4464/MAX4474 20 V/ms
f = 1kHz 150
Input Voltage Noise enf = 10kHz 120 nV /√Hz
Shorted to VSS (sourcing) 11
Output Short-Circuit
Current Shorted to VDD (sinking) 36 mA
Power-On Time tON 3ms
Power-Off Time tOFF 2µs
Capacitive Load CLOAD No sustained oscillations 250 pF
ELECTRICAL CHARACTERISTICS
(VDD = +5V, VSS = 0V, VCM = 0V, VOUT = VDD/2, RL= ∞to VDD/2, TA= TMIN to TMAX, unless otherwise noted.) (Note 1)
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage Range VDD Guaranteed by PSRR tests 1.8 5.5 V
Supply Current (Per
Amplifier) IDD VDD = +5.0V 1.5 µA
Input Offset Voltage VOS ±15 mV
Input Offset Voltage
Temperature Coefficient TCVOS 8 µV/°C
Input Bias Current IB4.25 nA
Input Common-Mode
Voltage Range VCM Guaranteed by the CMRR test VSS VDD -
1.1 V
Common-Mode Rejection
Ratio CMRR VSS ≤ VCM ≤ (VDD - 1.1V) 56 dB
+1.8V ≤ VDD ≤ +5.5V, 0oC ≤ TA ≤ +85oC65
Power-Supply Rejection
Ratio PSRR +2V ≤ VDD ≤ +5.5V, -40oC ≤ TA ≤ +85oC65 dB
VOUT = 50mV to VDD - 50mV, RL = 1MΩ75
Large-Signal Voltage Gain AVOL VOUT = 200mV to VDD - 200mV, RL = 100kΩ75 dB
RL = 1MΩ5
VOH Swing high specified
as VDD - VOH RL = 100kΩ15
RL = 1MΩ5
Output Voltage Swing
VOL Swing low specified as
VOL - VSS RL = 100kΩ5
mV
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
4 _______________________________________________________________________________________
Typical Operating Characteristics
(VDD = +5V, VSS = 0V, VCM = 0V, RL= 100kΩto VDD/2, TA= +25°C, unless otherwise noted.)
0
0.2
0.1
0.5
0.4
0.3
0.7
0.8
0.6
0.9
1.5 3.0 3.52.0 2.5 4.0 4.5 5.0 5.5 6.0
SUPPLY CURRENT PER AMPLIFIER vs.
SUPPLY VOLTAGE
MAX4470–74 toc01
SUPPLY VOLTAGE (V)
SUPPLY CURRENT (µA)
0
0.2
0.1
0.5
0.4
0.3
0.7
0.8
0.6
0.9
-50 0-25 25 50 75 100
SUPPLY CURRENT PER AMPLIFIER vs.
TEMPERATURE
MAX4470–74 toc02
TEMPERATURE (°C)
SUPPLY CURRENT (µA)
0
0.10
0.05
0.30
0.20
0.25
0.15
0.40
0.45
0.35
0.50
-50 0-25 25 50 75 100
OFFSET VOLTAGE vs.
TEMPERATURE
MAX4470–74 toc03
TEMPERATURE (°C)
OFFSET VOLTAGE (mV)
0
0.10
0.05
0.20
0.15
0.30
0.25
0.35
0.45
0.40
0.50
0 1.0 1.50.5 2.0 2.5 3.0 3.5 4.0
OFFSET VOLTAGE
vs. COMMON-MODE VOLTAGE
MAX4470-74 toc04
COMMON-MODE VOLTAGE (V)
OFFSET VOLTAGE (mV)
-400
-350
-150
-250
-200
-300
-50
-100
0
-50 0-25 25 50 75 100
INPUT BIAS CURRENT vs.
TEMPERATURE
MAX4470–74 toc05
TEMPERATURE (°C)
INPUT BIAS CURRENT (pA)
-90
-70
-80
-40
-50
-60
-20
-10
-30
0
01.51.00.5 2.0 2.5 3.0 3.5 4.0
INPUT BIAS CURRENT vs.
COMMON-MODE VOLTAGE
MAX4470–74 toc06
COMMON-MODE VOLTAGE (V)
INPUT BIAS CURRENT (pA)
0
-100
10 100 10k1k
POWER-SUPPLY REJECTION RATIO vs.
FREQUENCY
-80
-90
MAX4470–74 toc07
FREQUENCY (Hz)
PSRR (dB)
-60
-70
-40
-30
-50
-20
-10
0
0.2
1.0
0.6
0.8
0.4
1.4
1.2
1.6
-50 0-25 25 50 75 100
OUTPUT VOLTAGE SWING LOW vs.
TEMPERATURE
MAX4470–74 toc08
TEMPERATURE (°C)
VOL - VSS (mV)
RL = 100kΩ
RL = 1MΩ
0
1
4
2
3
5
6
-50 0-25 25 50 75 100
OUTPUT VOLTAGE SWING HIGH vs.
TEMPERATURE
MAX4470–74 toc09
TEMPERATURE (°C)
VDD - VOH (mV)
RL = 100kΩ
RL = 1MΩ
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
_______________________________________________________________________________________
5
-120
-100
-110
-60
-80
-70
-90
-40
-30
-50
-20
-50 0-25 25 50 75 100
COMMON-MODE REJECTION RATIO vs.
TEMPERATURE
MAX4470–74 toc10
TEMPERATURE (°C)
CMRR (dB)
0
0.4
0.2
0.8
0.6
1.2
1.0
1.4
-50 0 25-25 50 75 100
MINIMUM SUPPLY VOLTAGE
vs. TEMPERATURE
MAX4470-74 toc11
TEMPERATURE (°C)
MINIMUM SUPPLY VOLTAGE (V)
60
70
80
90
100
110
120
130
140
2.5 3.0 3.5 4.0 4.5 5.0
AVOL vs. OUTPUT VOLTAGE SWING
MAX4470-74 toc12
OUTPUT VOLTAGE (Vp-p)
AVOL (dB)
RL = 1MΩ
RL = 10kΩ
RL = 100kΩ
1 100 1k 10k10 100k
MAX4470/MAX4471/MAX4472
GAIN AND PHASE vs. FREQUENCY
MAX4470–74 toc13
FREQUENCY (Hz)
GAIN (dB)
PHASE (deg)
80
70
60
50
40
30
20
-60
10
0
-10
-20
-30
-40
-50
180
135
90
45
-135
0
-45
-90
CL = 12pF
RL = 1MΩ
AVCL = 1000V/V
GAIN
PHASE
1 100 1k 10k10 100k
MAX4470/MAX4471/MAX4472
GAIN AND PHASE vs. FREQUENCY
MAX4470–74 toc14
FREQUENCY (Hz)
GAIN (dB)
PHASE (deg)
80
70
60
50
40
30
20
-60
10
0
-10
-20
-30
-40
-50
180
135
90
45
-135
0
-45
-90
GAIN
PHASE
RL = 1MΩ
AVCL = 1000V/V
CL = 250pF
-40
-140
10 100 1k 10k 100k
CROSSTALK vs. FREQUENCY
-100
-120
MAX4470 toc15
FREQUENCY (Hz)
CROSSTALK (dB)
-80
-60
10.00
0.01
10 100 10k1k
MAX4470/MAX4471/MAX4472
TOTAL HARMONIC DISTORTION
PLUS NOISE vs. FREQUENCY
MAX4470–74 toc16
FREQUENCY (Hz)
THD + N (%)
0.10
1.00
10k
10
10 1k100 100k10k
VOLTAGE NOISE DENSITY vs.
FREQUENCY
MAX4470–74 toc17
FREQUENCY (Hz)
100
1k
NOISE (nV/√Hz)
100k
100
10k 100k 1M
MAX4470/MAX4471/MAX4472 STABILITY
vs. CAPACITIVE AND RESISTIVE LOADS
MAX4470–74 toc18
RESISTIVE LOAD (Ω)
1k
10k
CAPACITIVE LOAD (pF)
UNSTABLE
REGION
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = 0V, VCM = 0V, RL= 100kΩto VDD/2, TA= +25°C, unless otherwise noted.)
500µs/div
MAX4470/MAX4471/MAX4472
SMALL-SIGNAL STEP RESPONSE
INPUT
50mV/div
OUTPUT
50mV/div
MAX4470 toc21
VDD = +5V
AV = +1V/V
RL = 1MΩ
CL = 250pF
500µs/div
MAX4470/MAX4471/MAX4472
SMALL-SIGNAL STEP RESPONSE
INPUT
50mV/div
OUTPUT
50mV/div
MAX4470 toc22
VDD = +5V
AV = +1V/V
RL = 1MΩ
CL = 1000pF
500µs/div
MAX4470/MAX4471/MAX4472
LARGE-SIGNAL STEP RESPONSE
VDD = +5V
AV = +1V/V
RL = 1MΩ
CL = 12pF
INPUT
500mV/div
OUTPUT
500mV/div
MAX4470 toc23
500µs/div
MAX4470/MAX4471/MAX4472
LARGE-SIGNAL STEP RESPONSE
INPUT
500mV/div
OUTPUT
500mV/div
MAX4470 toc24
VDD = +5V
AV = +1V/V
RL = 1MΩ
CL = 1000pF
0
5
20
10
15
25
30
010050 150 200 250 300
MAX4470/MAX4471/MAX4472
PERCENT OVERSHOOT vs. CAPACITIVE LOAD
MAX4470–74 toc25
CLOAD (pF)
PERCENT OVERSHOOT (%)
RL = 10kΩ
RL = 100kΩ
RL = 1MΩ
3
-7
100 1k 10k
MAX4470/MAX4471/MAX4472
SMALL-SIGNAL GAIN vs. FREQUENCY
-5
-6
MAX4470–74 toc26
FREQUENCY (Hz)
GAIN (dB)
-3
-4
-1
0
-2
1
2RL = 10kΩ
VOUT = 100mVP-P
CL = 12pF
AV = 1
3
-7
100 1k 100k10k
MAX4470/MAX4471/MAX4472
SMALL-SIGNAL GAIN vs. FREQUENCY
-5
-6
MAX4470–74 toc27
FREQUENCY (Hz)
GAIN (dB)
-3
-4
-1
0
-2
1
2
AV = 1
RL = 100kΩ
VOUT = 100mVP-P
CL = 12pF
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
6 _______________________________________________________________________________________
0
12
8
4
16
20
24
28
32
36
40
021345
IOUT vs. VOUT
MAX4470–74 toc19
VOUT (V)
IOUT (mA)
ISINK
ISOURCE
500µs/div
MAX4470/MAX4471/MAX4472
SMALL-SIGNAL STEP RESPONSE
VDD = +5V
AV = +1V/V
RL = 1MΩ
CL = 12pF
INPUT
500mV/div
OUTPUT
500mV/div
MAX4470 toc20
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = 0V, VCM = 0V, RL= 100kΩto VDD/2, TA= +25°C, unless otherwise noted.)
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
_______________________________________________________________________________________
7
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = 0V, VCM = 0V, RL= 100kΩto VDD/2, TA= +25°C, unless otherwise noted.)
3
-7
100 1k 10k 100k
MAX4470/MAX4471/MAX4472
SMALL-SIGNAL GAIN vs. FREQUENCY
-5
MAX4470–74toc28
FREQUENCY (Hz)
GAIN (dB)
-3
-1
1
2
-6
-4
-2
0AV = 1
RL = 1MΩ
VOUT = 100mVP-P
CL = 12pF
3
-7
100 1k 10k
MAX4470/MAX4471/MAX4472
LARGE-SIGNAL GAIN vs. FREQUENCY
-5
-6
MAX4470–74 toc29
FREQUENCY (Hz)
GAIN (dB)
-3
-4
-1
0
-2
1
2
AV = 1
RL = 10kΩ
VOUT = 1VP-P
CL = 12pF
3
-7
100 1k 10k
MAX4470/MAX4471/MAX4472
LARGE-SIGNAL GAIN vs. FREQUENCY
-5
-6
MAX4470–74 toc30
FREQUENCY (Hz)
GAIN (dB)
-3
-4
-1
0
-2
1
2
AV = 1
RL = 100kΩ
VOUT = 1VP-P
CL = 12pF
3
-7
100 1k 10k
MAX4470/MAX4471/MAX4472
LARGE-SIGNAL GAIN vs. FREQUENCY
-5
-6
MAX4470–74 toc31
FREQUENCY (Hz)
GAIN (dB)
-3
-4
-1
0
-2
1
2
AV = 1
RL = 1MΩ
VOUT = 1VP-P
CL = 12pF
80
-60
1 1k 10k 100k
10
FREQUENCY (Hz)
GAIN (dB)
10 100
MAX4464/MAX4474
GAIN AND PHASE vs. FREQUENCY
70
60
50
40
30
20
0
-10
-20
-30
-40
-50
MAX4464 toc32 180
135
90
45
0
-45
-90
-135
PHASE (degrees)
RL =1MΩ
CL = 8pF
AVCL = 1000V/V
GAIN
PHASE
80
-60
1 1k 10k 100k
10
FREQUENCY (Hz)
GAIN (dB)
10 100
MAX4464/MAX4474
GAIN AND PHASE vs. FREQUENCY
70
60
50
40
30
20
0
-10
-20
-30
-40
-50
MAX4464 toc33
RL =1MΩ
CL = 250pF
AVCL = 1000V/V
GAIN
PHASE
180
135
90
45
0
-45
-90
-135
PHASE (degrees)
0.001
10 10k1k100
MAX4464/MAX4474
TOTAL HARMONIC DISTORTION
PLUS NOISE vs. FREQUENCY
10
0.01
1
0.1
MAX4464 toc34
FREQUENCY (Hz)
THD + N (%)
100,000
100
10k 100k 1M
MAX4464/MAX4474
STABILITY vs. CAPACITIVE
AND RESISTIVE LOADS
MAX4464 toc35
RESISTIVE LOAD (Ω)
CAPACITIVE LOAD (pF)
1000
10,000
UNSTABLE
REGION
OUTPUT
50mV/div
INPUT
10mV/div
MAX4464/MAX4474
SMALL-SIGNAL STEP RESPONSE
MAX4464 toc36
500µs/div
VDD = +5V
AV = +5V/V
RL = 1MΩ
CL = 8pF
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
8 _______________________________________________________________________________________
OUTPUT
50mV/div
INPUT
10mV/div
MAX4464/MAX4474
SMALL-SIGNAL STEP RESPONSE
MAX4464 toc37
500µs/div
VDD = +5V
AV = +5V/V
RL = 1MΩ
CL = 250pF
OUTPUT
50mV/div
INPUT
10mV/div
MAX4464/MAX4474
SMALL-SIGNAL STEP RESPONSE
MAX4464 toc38
500µs/div
VDD = +5V
AV = +5V/V
RL = 1MΩ
CL = 1000pF
OUTPUT
500mV/div
INPUT
100mV/div
MAX4464/MAX4474
LARGE-SIGNAL STEP RESPONSE
MAX4464 toc39
500µs/div
VDD = +5V
AV = +5V/V
RL = 1MΩ
CL = 8pF
OUTPUT
500mV/div
INPUT
100mV/div
MAX4464/MAX4474
LARGE-SIGNAL STEP RESPONSE
MAX4464 toc40
500µs/div
VDD = +5V
AV = +5V/V
RL = 1MΩ
CL = 1000pF
0
10
5
20
15
25
30
0 100 15050 200 250 300
MAX4464/MAX4474
PERCENT OVERSHOOT vs. CAPACITIVE LOAD
MAX4464 toc41
CLOAD (pF)
PERCENT OVERSHOOT (%)
RL = 100kΩ
RL = 10kΩ
RL = 1MΩ
2
-7
100 100k10k1k
MAX4464/MAX4474
SMALL-SIGNAL NORMALIZED GAIN
vs. FREQUENCY
-4
-6
0
-2
3
-3
-5
1
-1
MAX4464 toc42
FREQUENCY (Hz)
GAIN (dB)
RL = 10kΩ
VOUT = 100m
VP-P
CL = 12pF
AV = +5
2
-7
100 100k10k1k
MAX4464/MAX4474
SMALL-SIGNAL NORMALIZED GAIN
vs. FREQUENCY
-4
-6
0
-2
3
-3
-5
1
-1
MAX4464 toc43
FREQUENCY (Hz)
GAIN (dB)
RL = 100kΩ
VOUT = 100m
VP-P
CL = 12pF
AV = +5
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = 0V, VCM = 0V, RL= 100kΩto VDD/2, TA= +25°C, unless otherwise noted.)
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
_______________________________________________________________________________________
9
2
-7
100 100k10k1k
MAX4464/MAX4474
LARGE-SIGNAL NORMALIZED GAIN
vs. FREQUENCY
-4
-6
0
-2
3
-3
-5
1
-1
MAX4464 toc46
FREQUENCY (Hz)
GAIN (dB)
RL = 100kΩ
VOUT = 1
VP-P
CL = 12pF
AV = +5
2
-7
100 100k10k1k
MAX4464/MAX4474
LARGE-SIGNAL NORMALIZED GAIN
vs. FREQUENCY
-4
-6
0
-2
3
-3
-5
1
-1
MAX4464 toc47
FREQUENCY (Hz)
GAIN (dB)
RL = 1MΩ
VOUT = 1
VP-P
CL = 12pF
AV = +5
2
-7
100 100k10k1k
MAX4464/MAX4474
SMALL-SIGNAL NORMALIZED GAIN
vs. FREQUENCY
-4
-6
0
-2
3
-3
-5
1
-1
MAX4464 toc44
FREQUENCY (Hz)
GAIN (dB)
RL = 1MΩ
VOUT = 100m
VP-P
CL = 12pF
AV = +5
2
-7
100 100k10k1k
MAX4464/MAX4474
LARGE-SIGNAL NORMALIZED GAIN
vs. FREQUENCY
-4
-6
0
-2
3
-3
-5
1
-1
MAX4464 toc45
FREQUENCY (Hz)
GAIN (dB)
RL = 10kΩ
VOUT = 1
VP-P
CL = 12pF
AV = +5
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = 0V, VCM = 0V, RL= 100kΩto VDD/2, TA= +25°C, unless otherwise noted.)
Pin Description
PIN
MAX4464/
MAX4470
MAX4470
(WLP)
MAX4471/
MAX4474 MAX4472 NAME FUNCTION
1A1 — — IN+ Noninverting Amplifier Input
——3 3 INA+ Noninverting Amplifier Input (Channel A)
2A2 411V
SS Negative Power-Supply Voltage
3B1 — — IN- Inverting Amplifier Input
4C1 — — OUT Amplifier Output
——2 2 INA- Inverting Amplifier Input (Channel A)
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
10 ______________________________________________________________________________________
R1
2pF TO 10pF
R2
VIN
VCC
VSS
MAX44_ _
Figure 1. Compensation for Feedback Node Capacitance
Applications Information
Ground Sensing
The common-mode input range of the MAX4470 family
extends down to ground, and offers excellent common-
mode rejection. These devices are guaranteed not to
undergo phase reversal when the input is overdriven.
Power Supplies and Layout
The MAX4470 family operates from a single +1.8V to
+5.5V power supply. Bypass power supplies with a
0.1µF ceramic capacitor placed close to the VDD pin.
Ground layout improves performance by decreasing the
amount of stray capacitance and noise at the op amp’s
inputs and outputs. To decrease stray capacitance, mini-
mize PC board lengths and resistor leads, and place
external components close to the op amps’ pins.
Bandwidth
The MAX4470/MAX4471/MAX4472 are internally
compensated for unity-gain stability and have a typical
gain-bandwidth of 9kHz. The MAX4464/MAX4474 have
a 40kHz typical gain-bandwidth and are stable for a
gain of +5V/V or greater.
Stability
The MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
maintain stability in their minimum gain configuration
while driving capacitive loads. Although this product
family is primarily designed for low-frequency applica-
tions, good layout is extremely important because low-
power requirements demand high-impedance circuits.
The layout should also minimize stray capacitance at the
amplifier inputs. However some stray capacitance may
be unavoidable, and it may be necessary to add a 2pF
to 10pF capacitor across the feedback resistor as shown
in Figure 1. Select the smallest capacitor value that
ensures stability.
Pin Description (continued)
PIN
MAX4464/
MAX4470
MAX4470
(WLP)
MAX4471/
MAX4474 MAX4472 NAME FUNCTION
——1 1 OUTA Amplifier Output (Channel A)
——6 6 INB- Inverting Amplifier Input (Channel B)
——5 5 INB+ Noninverting Amplifier Input (Channel B)
——7 7 OUTB Amplifier Output (Channel B)
——— 9 INC- Inverting Amplifier Input (Channel C)
——— 10 INC+ Noninverting Amplifier Input (Channel C)
——— 8 OUTC Amplifier Output (Channel C)
——— 13 IND- Inverting Amplifier Input (Channel D)
——— 12 IND+ Noninverting Amplifier Input (Channel D)
——— 14 OUTD Amplifier Output (Channel D)
5B28 4V
DD Positive Power-Supply Voltage
— C2 — — N.C. No Connection. Not internally connected.
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
______________________________________________________________________________________ 11
Chip Information
PROCESS: BiCMOS
INB-
INB+
VSS
1
2
8
7
VDD
OUTB
INA-
INA+
OUTA
3
4
6
5
SOT23/µMAX/SO
MAX4471
MAX4474 14
13
12
11
10
9
8
1
2
3
4
5
6
7
OUTD
IND-
IND+
VSS
VDD
INA+
INA-
OUTA
INC+
INC-
OUTC
OUTB
INB-
INB+
SO/TSSOP
MAX4472
++
VSS
OUTIN-
15VDD
IN+ MAX4470
MAX4464
SC70/SOT23
TOP VIEW
2
34
+
Pin Configurations (continued)
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
12 ______________________________________________________________________________________
Package Information
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
PACKAGE TYPE PACKAGE CODE DOCUMENT NO. LAND PATTERN NO.
5 SC70 X5+1 21-0076 90-0188
5 SOT23 U5+1 21-0057 90-0174
6 WLP W61B1+1 21-0217 Refer to Application Note 1891
8 µMAX U8+1 21-0036 90-0092
8 SOT23 K8+5 21-0078 90-0176
8 SOIC S8+2 21-0041 90-0096
14 SOIC S14+1 21-0041 90-0096
14 TSSOP U14+1 21-0066 90-0117
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
______________________________________________________________________________________ 13
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
14 ______________________________________________________________________________________
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
______________________________________________________________________________________ 15
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
D
D
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
16 ______________________________________________________________________________________
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
0
0
MARKING
PACKAGE OUTLINE, SOT-23, 8L BODY
21-0078 J
1
1
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
______________________________________________________________________________________ 17
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
18 ______________________________________________________________________________________
Package Information (continued)
For the latest package outline information and land patterns (footprints), go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing per-
tains to the package regardless of RoHS status.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________
19
© 2011 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.
MAX4464/MAX4470/MAX4471/MAX4472/MAX4474
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
Revision History
REVISION
NUMBER
REVISION
DATE DESCRIPTION PAGES
CHANGED
3 6/10 Added WLP package 1, 2, 9, 10, 11
4 7/11 Updated power-on time specification 3
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Maxim Integrated:
MAX4464EUK+T MAX4464EXK+T MAX4470EUK+T MAX4470EXK+T MAX4471EKA+T MAX4471ESA+
MAX4471ESA+T MAX4472ESD+ MAX4472ESD+T MAX4472EUD+ MAX4472EUD+T MAX4474EKA+T
MAX4474ESA+ MAX4474ESA+T MAX4474EUA+ MAX4474EUA+T MAX4470EWT+T MAX4472ESD
MAX4472ESD-T MAX4472EUD MAX4472EUD-T
