Shrouded Headers 2.54 mm (0.100 in.} Ordering Data Base number specifies connector style rs [ocr Number of positions (see table) OOOOO-xyvyvz Plating Options J bo Tail Length Replace X in B - 1.27 pm (50 pin) Ni under D - 1.27 um {50 pin) Ni under Replace Z in dash number dash number with: 1- 1.27 pm (50 pin) Ni under 0.76 pm (30 pin) gold 3- 1.27 um (50 yin) Ni under 1.27 um (50 pin) gold 5- 1.27 um (50 win) Ni under 0.76 pm (30 pin) GXT A- 1.27 ym (50 pin) Ni under all; with .76 um (30 pin) Au on contact area, and SnPb on PCB interface. Au flash all other areas.* all; with .76 pm (30 pin) GXT on contact area, and SnPb on PCB interface. Au flash ail other areas.* 1.27 pm (50 pin) Ni under all; with 0.76 pm (30 pin.) Au on contact area, and SnPb on PCB interface. 0.76 um (30 yin) Au on tail side contact area. Au flash all other areas. a ' all; with .76 pm (30 pin) GXT on contact area, and SnPb on PCB interface. .76 pm (30 pin) GXT on tail side contact area, Au flash all other areas. Note, Available on C & D Tail Lengths only. with: S - 2.54 mm (0.100in) J - 3.05 mm (0.120in) A - 4.50 mm (0.177in) H - 4.57 mm (0.180in) G - 3.05 mm (0.250in) C - 13.54 mm (0.533in) D - 18.63 mm (0.733in) * Available on A & G Tail Lengths only Note, Available on C & D Tail Lengths only Base Number Option Menu Base Number | Style Platings Available Tail Length 50008 (1) Press Fit Pins, Vertical 1,3,5 4,G,C,D 50767 (1) Press Fit Pins, Vertical, Duplex Plating A,B,C, DB A4,G,C,D 50014 (2) Solder Tail Pins, Vertical 1,3,5 JA,G,C,D 50775 (2) Solder Tail Pins, Vertical, Duplex Plating A,B JA 50121 Solder Tail Pins, Right Angle 1,3,5 H, J 50781 Solder Tail Pins, Right Angle, Duplex Plating A $s 50430 Shroud, Pinless Header, Self-Retaining x x 50436 Shroud, Pinless Header, Slip On Xx x (1) Request Select Load Worksheet, 50809 for FMLB options. (2) Request Select Load Worksheet, 50812 for FMLB options. _ Dash Number Dimensions Number of Dash Number (XYYYZ) A B | c J - a mm in. mm in. mm | _ in. mm in. 360 X360Z 339.09 13.350 331.47 13.050 99.06 3.900 109.22 4.300 369 X369Z 346.71 13.650 | 339.09 | 13.350 | 101.60 4.000 111.76 4.400 378 X378Z 354.33 13.950 346.71 13.650 104.14 4.100 114.30 4.500 387 X387Z 361.95 | 14.250 | 354.33 | 13.950 | 106.68 4.200 116.84 4.600 396 X396Z 369.57 | 14.5950 | 361.95 | 14.250 | 109.22 4.300 119.38 4.700 405 X405Z 377.19 | 14.850 | 369.57 | 14.550 | 111.76 4.400 121.92 4.800 414 X414Z 384.81 15.150 377.19 14.850 114.30 4.500 124.46 4.900 423 X423Z 392.43 | 15.450 | 384.81 15.150 | 116.84 4.600 127.00 5.000 432 X432Z 400.05 | 15.750 | 392.43 | 15.450 | 119.38 4.700 129.54 5.100 441 X441Z 407.67 | 16.050 | 400.05 | 15.750 | 121.92 4,800 132.08 5.200 450 X450Z 415.29 | 16.350 | 407.67 | 16.050 | 124.46 4.900 134.62 5.300 Ordering data shown is for our standard product offering. For non-standard or custom products, contact your authorized Berg Electronics representative. M@ 9005411 00020693 41b Berg Electronics 1-800-237-2374 HPC 17-9 PCB Mounted Headers and Shrouds High Pin Count (HPC) 2.54 mm (0.100 in.) Centerlines 3- and 4-Row Vertical and Right-Angle Headers Self-Retaining and Slip-On Shrouds 0, 1, and 2 header Guide Pins Features Options Approvals and = =3-Row: 30 through 450 positions. Solder-tail or press-fit pins. Certifications = 4-Row: 40 through 600 positions. = Three mating pin lengths for CAL File no. E66906 Polyphenylene sulfide (PPS) housing for IR and vapor-phase soldering. Plated with gold or Bergs exclusive first-make--last-break applications. Selective loading of pins. Various tail lengths. G- File no. LR46923 GXT (palladium-nickel alloy with gold flash). =) Made with 0.64 mm (0.025 in.) drawn-wire pins. Mating Data Application Equipment = 3- and 4-row shrouds for all header Berg Electronics Products Page sizes. = HPC Right-Angle Berg Electronics Products Page All mounting brackets are Receptacles ................ 17-18 = HPC Header pre-assembled. Installation Kit............... 17-51 = Hardware for mounting, power and static discharge, guidance, and keying. Radiused pin tip for lower insertion force. Technical Data q Materials = Contact resistance ........ <20 mQ (mated system) after Housing...............000. Glass-filled PPS (UL-94 V-0) environmental conditions ai \ 9) (0) ga Black Mechanical Performance @ Pin......... Phosphor-bronze, 3/4 hard per ASTM B-159 Normal force................004 0.54 N (60 gf) typical; Electrical Performance 0.49 N (50 gf) min, 200 kpsi Hertz stress = Insulation resistance. .................. 21000 MQ after Environmental Properties environmental test conditions o RR 9 = Withstanding voltage ................ 21000 V ac rms, Temperature range... .-..s sees 65C to +125C 60 Hz at sea level Packaging Current rating . ae . Ant Allcontacts powered ........... 1.0 amp continuous ntistatic tubes per contact One contact powered........... 3.0 amp continuous per contact Customer Support Materials Description Order No. Description Order No. Customer Product Drawings............... By Part No. Product Samples................00000- Upon Request Product Specifications.................... BUS-12-090 ; Me 9005411 O002b4b 246 17-2, HPC Berg Electronics 1-800-237-2374 Shrouded Headers 2.54 mm (0.100 in.) Description 3-Row Vertical and Right-Angle Headers Compliant Press-Fit or Solder-Tail Pins 2 Guide Holes < TA, LENGTH ~F fo] rh = a7 2 _-) bh ipO <=> { L | 9 5.60 [.220] I 1 | = + 4} | i steate | | ay R/A STYLE, SOLDER TAIL PINS ONLY om A bu 6 OM a cod cool Joce e AB gee Pe eee I $ | i = | 10.16 [.400} 1h 64 [.025) 361 Leahy r [= PINS. J } | HT iH VY #60 [220] | | t a SOLDER TAIL PINS PRESS FIT PINS ME 9005411 0002692 S&T mm 17-8 HPC Berg Electronics 1-800-237-2374