SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N: Description : Product : Multi-layer Ceramic Capacitor CL31B225KCHSNNE CAP, 2.2, 100V, 10%, X7R, 1206 A. Samsung Part Number 31 CL Series Size B 225 K C H S N Samsung Multi-layer Ceramic Capacitor 1206 (inch code) L: 3.20 0.20mm N E W: 1.60 0.20mm Dielectric Capacitance Capacitance X7R 2.2 10 % Inner electrode Termination Plating Ni Cu_Ag Epoxy Sn 100% (Pb Free) tolerance Rated Voltage 100 V Product Special Normal Reserved for future use Packaging Embossed Type, 7" reel Thickness 1.60 0.20mm B. Samsung Reliablility Test and Judgement condition Judgement Test condition Capacitance Tan (DF) Insulation Within specified tolerance 0.1 max. 110% 1.00.2Vrms 10,000Mohm or 500Mohm Rated Voltage 60~120 sec. Resistance Whichever is Smaller Appearance Withstanding Voltage Temperature Characteristics No abnormal exterior appearance Microscope (x10) 200% of the rated voltage No dielectric breakdown or mechanical breakdown X7R (From -55 to 125, Capacitance change shoud be within 15%) Adhesive Strength of Termination Bending Strength No peeling shall be occur on the terminal electrode Capacitance change : within 12.5% Solderability More than 75% of terminal surface Resistance to Soldering heat 500g*F, for 101 sec. Bending to the limit (1mm) with 1.0mm/sec. SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Capacitance change : within 7.5% Tan , IR : initial spec. Solder pot : 2705, 101sec. Vibration Test Moisture Resistance High Temperature Resistance Temperature Cycling Judgement Capacitance change : within 5% Tan , IR : initial spec. Capacitance change : within 12.5% Tan 0.125 max IR : 500Mohm or 12.5Mohm . Whichever is Smaller Capacitance change : within 12.5% Tan 0.125 max IR : 1000Mohm or 25Mohm . Whichever is Smaller Capacitance change : within 7.5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) With rated voltage 402, 90~95%RH, 500+12/-0hrs With 150% of the rated voltage Max. operating temperature 1000+48/-0hrs 1 cycle condition Min. operating temperature Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 25 25