BULLETIN DB-IPT
PART #K796410
PRESSURE TRANSDUCERS
U.S. GAUGE
PMT PRODUCTS
U.S. GAUGE • PMT PRODUCTS 820 Pennsylvania Blvd., Feasterville, PA 19053 U.S.A. •TEL: (215) 355-6900 •FAX: (215) 355-2937 •www.ametekusg.com
EFFECTIVE: 1/00 SUPERSEDES: 5/96
Model IPT Industrial Pressure Transducer
FEATURES
APPLICATIONS
DESCRIPTION
The Model IPT general purpose
industrial pressure transducer is
designed for use in a variety of
industries. Providing excellent
media compatibility, stability, low
cost and proven reliability, it is ideal
for OEM applications. This model
provides three input/output options
(0 to 100 mV, 1 to 5 VDC or 4 to
20 mA). Each unit is shipped fully
compensated for pressure and
temperature and is completely
interchangeable without the need
for further calibration.
The IPT features a solid state
silicon piezoresistive sensing
element, electrostatically bonded
to a glass pedestal to virtually
eliminate the effects of induced
stress and vibration. The trans-
ducer has a computer-controlled
laser trimmed custom hybrid circuit
which standardizes output and
provides precise temperature and
pressure compensation. Rugged
construction and a standard
18 inch (45 cm) cable make it
truly cost effective.
0.3% accuracy
Excellent stability
Solid state/industrial grade
Temperature compensated
Stainless steel pressure
connection for maximum
media compatibility
Rugged Ultem1 housing
provides outstanding
corrosion resistance
Pressure ranges up to
500 psig
MV, voltage or 4 to 20 mA
output available
Vacuum and compound
pressure ranges available
Low cost
1TM General Electric Co.
Refrigeration
Compressors
Pumps
Hydraulic systems
Pressure instrumentation
Engine monitoring/control
Engine testing
Pneumatic systems
Flow control
MODEL IPT TRANSDUCER
© 2000, by AMETEK, Inc. All rights reserved.
2.5M100L (110055)
U.S. GAUGE • PMT PRODUCTS
820 PENNSYLVANIA BLVD., FEASTERVILLE, PENNSYLVANIA 19053 U.S.A.
TEL: (215) 355-6900 •FAX: (215) 355-2937 •www.ametekusg.com
Model IPT Industrial Pressure Transducer
SPECIFICATIONS
PRESSURE RANGE1
Vacuum to 0 to 500 psig
MAXIMUM OVERPRESSURE
2 times full scale or 750 psig, whichever
is less
BURST PRESSURE (AT 25O C)
3 times full scale or 750 psig, whichever
is less
DIMENSIONS
ACCURACY
+0.3% span from best fit straight line
including non-linearity repeatability and
hysteresis
OPERATING TEMPERATURE RANGE
-40O C to 105O C
COMPENSATED TEMPERATURE RANGE
-5O C to 55O C
THERMAL EFFECT ON ZERO (NULL)2
+0.5% span (typical) over compensated
temperature range, +2.0% maximum
THERMAL EFFECT ON SPAN2
+0.5% span (typical) over compensated
temperature range, +2.0% maximum
RESPONSE TIME
Less than 5 milliseconds
STABILITY
+0.25% span/year
SHOCK3
100 g
VIBRATION
10 g, 100 to 2000 Hz4
WEIGHT
50 grams
ELECTRICAL TERMINATIONS
#20 AWG Shielded wire/18 inches long
WETTED PARTS
Fluorosilicone, silicone, Pyrex glass, 303
stainless steel
HUMIDITY
Passes MIL-STD-202F Method 103B,
Condition A
1. For availability of other pressure ranges, consult factory.
2. Temperature error is calculated with respect to 25O C and
expresses the deviation that could occur as temperature
is raised or lowered to limits indicated.
3. MIL-STD-202F, Method 213B, 1/2 Sine, Condition D.
4. MIL-STD-202F, Method 204C, Condition C, Parts 1 & 2.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
ORDERING INFORMATION
MODEL NUMBER
IPT G 0060 D S FS
MODEL
IPT = Pressure Transducer
TYPE
C = Compound
G = Gauge
V = Vacuum
RANGES1
0015 = 0 to 15 psig
0030 = 0 to 30 psig
0060 = 0 to 60 psig
0100 = 0 to 100 psig
0200 = 0 to 200 psig
0300 = 0 to 300 psig
0500 = 0 to 500 psig
INPUT/OUTPUT
A = 10 VDC/0 to 100 mV
B = 12 to 25 VDC/4 to 20 mA
D = 12 to 25 VDC/1 to 5 VDC
PRESSURE PORT
S = Stainless Steel
O RING
FS = Fluorosilicone (Standard)*
* Fluorosilicone is not suitable
for all media, contact factory
for assistance when specifying
O ring material.
Example:
IPT G 0060 D S FS
Model IPT Industrial
Pressure Transducer
gauge, 0 to 60 psig range
with a 12 to 25 VDC input/1 to 5 VDC
output, stainless steel port and
fluorosilicone O ring
2.55
(64.8)
7/16
HEX
(11.1)
1/8-27
NPT
1.48
(37.6)
1.79
(45.3)
.74
(18.7)
1.41
(35.8)
18.0
(457.2)
#20 AWG
SHIELDED WIRE
LG
1.0
(25.4)
1.0
(25.4)
1.5
(38.1)
Ø .12
(3.0) 4 HOLES
WIRE LEGEND
MV VDC MA
RED +VIN +VIN +VIN
BLACK -VIN -VIN -VIN
WHITE -S +E N/A
GREEN +S N/A N/A
IN
(MM)
OUTPUT 0-100 MV 1-5 VDC 4-20 mA
EXCITATION 10 VDC 12-25 VDC 12-25 VDC
NULL OFFSET
(AT 25
O
C) 0 MV 1.0 VDC 4.0 mA
+1.0% SPAN
SPAN
(AT 25
O
C) 100 MV 4.0 VDC 16.0 mA
+1.0% SPAN
