Document No. CRM
Issued Date 2009/01/09
Metal Film Milli-Ohm Chip
Resistor (CRM)
Page 5 / 10
Cal-Chip Electronics, INC.
7. Reliability Tests: (As specified in JIS C 5202)
Test Items Condition of Test Test Limits Reference
standard
TCR
(Temperature Coefficient of Resistance) -55 ~ +125 oC Refer to paragraph 5 JIS-C5202 - 5.2
Short Time Overload 2.5 X rated voltage, 5s 0201:± (2%+0.001 Ω )
others: ± (1%+0.001 Ω ) JIS-C5202 - 5.5
Load Life Apply rated power at 70oC for 1000
hours, 1.5hours "ON" and 0.5hour "OFF"
0201:± (3%+0.001 Ω )
others: ± (2%+0.001 Ω ) JIS-C5202 - 7.10
Moisture Resistance Storage at 40±2oC and 90~95% RH
for 1000h
0201:± (3%+0.001 Ω )
others: ± (2%+0.001 Ω ) JIS-C5202 - 7.9
Rapid Change of Temperature -55 oC (30 min. ) / +125 oC (30 min. )
100 cycles ± (1%+0.001 Ω ) JIS-C5202 - 7.4
Resistance to Soldering Heat 270±5 oC solder , 10±1 sec dwell 0201:± (2%+0.001 Ω )
others: ± (1%+0.001 Ω ) JIS-C5202 - 6.10
Solderability 245±5 oC solder, 2±0.5 sec dwell.
Solder : Sn96.5 / Ag3.0 / Cu0.5
At least 95% of surface
area of electrode shall be
covered with new solder. JIS-C5202 - 6.11
Robustness of Termination
(Bending Strength) 3mm deflection 0201:± (2%+0.001 Ω )
others: ± (1%+0.001 Ω ) JIS-C5202 - 6.1
High Temperature Exposure 125 ±5 oC for 1000 hrs ± (1%+0.001 Ω ) JIS-C5202 - 7.2
8. Taping & Reel
8.1 Taping Dimensions: 4 mm pitch paper