Issue date: April 2011
TDK MLCC
US Catalog
Version B11
C Series
High Q Capacitors
Type: C0603 [EIA CC0201]
REMINDERS
Please read before using this product
SAFETY REMINDERS
TDK MLCC US Catalog Version B11Page 148
REMINDERS
1. If you intend to use aproduct listed in this catalog for apurpose that may cause loss of life or other
damage, you must contact our company’s sales window.
2. We may modify products or discontinue production of aproduct listed in this catalog without prior
notification.
3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each
product listed in this catalog.We strongly recommend that you exchange these delivery specifications
with customers that use one of these products.
4. If you plan to export aproduct listed in this catalog, keep in mind that it may be arestricted item according
to the “Foreign Exchange and Foreign Trade Control Law”.In such cases, it is necessary to acquire export
permission in harmony with this law.
5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from
our company.
6. We are not responsible for problems that occur related to the intellectual property rights or other rights of
our company or athird party when you use aproduct listed in this catalog.We do not grant license of
these rights.
7. This catalog only applies to products purchased through our company or one of our company’s official
agencies.This catalog does not apply to products that are purchased through other third parties.
TDK MLCC US Catalog Version B11Page 149
C Series
High Q Capacitors
Type: C0603
Available Through Distribution Only*
• Higher Q factor than standard capacitors
• High stability with respect to time, temperature,
frequency, and voltage
• Excellent attenuation
• High self-resonant frequency
• Lower power dissipation/less energy absorption
• Capacitance range of 0.2pF to 15pF
• Available in standard and tight tolerance
• Please contact TDK for Q values
Applications •High-frequency applications
•PA modules
•Cellular communication, Bluetooth
•Cable/satellite TV
•GPS/satellite radio
•Filter networks/matching networks
•RF amplifiers/Low noise amplifiers
•VCOs, TCXOs, etc.
•DC blocking circuits
Features
Shape &
Dimensions
Dimensions in mm
Part Number
Construction
Series Name
C0603 C0G 1E 150 J T XXXX
Dimensions L x W (mm)
Temperature Characteristic
Rated Voltage (DC)
Nominal Capacitance (pF)
Capacitance Tolerance
Packaging Style
Internal Codes
LBody Length
WBody Width
TBody Height
BTerminal Width
Case Code Length Width
C0603 0.60 ±0.03 0.30 ±0.03
Temperature
Characteristics
Capacitance
Change
Temperature
Range
C0G 0±30 ppm/ºC -55 to +125ºC
Voltage Code Voltage (DC)
1E 25V
The capacitance is expressed in three digit codes and in units of pico
Farads (pF). The first and second digits identify the first and second
significant figures of the capacitance. The third digit identifies the
multiplier. R designates a decimal point.
Capacitance Code Capacitance
0R5 0.5pF
010 1pF
102 1,000pF (1nF)
105 1,000,000pF (1µF)
Tolerance Code Tolerance
W±0.05 pF
B±0.10 pF
C±0.25 pF
D±0.50 pF
E±0.20 pF
G±2%
J±5%
Packaging Code Style
TTape & Reel
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
LBody Length
WBody Width
TBody Height
BTerminal Width
TDK MLCC US Catalog Version B11Page 150
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
Capacitance
Range Chart C0603 [EIA CC0201]
Capacitance Range Chart
Temperature Characteristics: C0G (0 ±30ppm/ºC)
Rated Voltage: 25V(1E)
0.30 mm
Standard Thickness
Capacitance
(pF)
Cap
Code
Temperature
Characteristics
Tolerance
0.2 0R2 -55 to 125ºC,
0±30 ppm/ºC
0.3 0R3
0.4 0R4
0.5 0R5
0.6 0R6
0.7 0R7
0.8 0R8
0.9 0R9
1010
1.1 1R1
1.2 1R2
1.3 1R3
1.5 1R5
1.6 1R6
1.8 1R8
2020
2.2 2R2
2.4 2R4
2.7 2R7
3030
3.3 3R3
3.6 3R6
3.9 3R9
4040
4.3 4R3
4.7 4R7
5050
5.1 5R1
5.6 5R6
6060
6.2 6R2
6.8 6R8
7070
7.5 7R5
8080
8.2 8R2
9090
9.1 9R1
10 100
11 110
12 120
13 130
15 150
16 160
18 180
20 200
TDK MLCC US Catalog Version B11Page 151
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
Capacitance
Range Table C0603 [EIA CC0201]
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
C0603C0G1E0R2WTQ C0G 25V
0.2
±0.05pF 0.30 ±0.03
C0603C0G1E0R2BTQ C0G 25V
0.2
±0.10pF 0.30 ±0.03
C0603C0G1E0R3WTQ C0G 25V
0.3
±0.05pF 0.30 ±0.03
C0603C0G1E0R3BTQ C0G 25V
0.3
±0.10pF 0.30 ±0.03
C0603C0G1E0R4WTQ C0G 25V
0.4
±0.05pF 0.30 ±0.03
C0603C0G1E0R4BTQ C0G 25V
0.4
±0.10pF 0.30 ±0.03
C0603C0G1E0R5WTQ C0G 25V
0.5
±0.05pF 0.30 ±0.03
C0603C0G1E0R5BTQ C0G 25V
0.5
±0.10pF 0.30 ±0.03
C0603C0G1E0R6WTQ C0G 25V
0.6
±0.05pF 0.30 ±0.03
C0603C0G1E0R6BTQ C0G 25V
0.6
±0.10pF 0.30 ±0.03
C0603C0G1E0R7WTQ C0G 25V
0.7
±0.05pF 0.30 ±0.03
C0603C0G1E0R8WTQ C0G 25V
0.7
±0.05pF 0.30 ±0.03
C0603C0G1E0R7BTQ C0G 25V
0.7
±0.10pF 0.30 ±0.03
C0603C0G1E0R8BTQ C0G 25V
0.8
±0.10pF 0.30 ±0.03
C0603C0G1E0R9WTQ C0G 25V
0.9
±0.05pF 0.30 ±0.03
C0603C0G1E0R9BTQ C0G 25V
0.9
±0.10pF 0.30 ±0.03
C0603C0G1E010BTQ C0G 25V
1.0
±0.10pF 0.30 ±0.03
C0603C0G1E010CTQ C0G 25V
1.0
±0.25pF 0.30 ±0.03
C0603C0G1E1R1BTQ C0G 25V
1.1
±0.10pF 0.30 ±0.03
C0603C0G1E1R1CTQ C0G 25V
1.1
±0.25pF 0.30 ±0.03
C0603C0G1E1R2BTQ C0G 25V
1.2
±0.10pF 0.30 ±0.03
C0603C0G1E1R2CTQ C0G 25V
1.2
±0.25pF 0.30 ±0.03
C0603C0G1E1R3BTQ C0G 25V
1.3
±0.10pF 0.30 ±0.03
C0603C0G1E1R3CTQ C0G 25V
1.3
±0.25pF 0.30 ±0.03
C0603C0G1E1R5BTQ C0G 25V
1.5
±0.10pF 0.30 ±0.03
C0603C0G1E1R5CTQ C0G 25V
1.5
±0.25pF 0.30 ±0.03
C0603C0G1E1R6BTQ C0G 25V
1.6
±0.10pF 0.30 ±0.03
C0603C0G1E1R6CTQ C0G 25V
1.6
±0.25pF 0.30 ±0.03
C0603C0G1E1R8BTQ C0G 25V
1.8
±0.10pF 0.30 ±0.03
C0603C0G1E1R8CTQ C0G 25V
1.8
±0.25pF 0.30 ±0.03
C0603C0G1E020BTQ C0G 25V
2.0
±0.10pF 0.30 ±0.03
C0603C0G1E020CTQ C0G 25V
2.0
±0.25pF 0.30 ±0.03
C0603C0G1E2R2BTX C0G 25V
2.2
±0.10pF 0.30 ±0.03
C0603C0G1E2R2CTX C0G 25V
2.2
±0.25pF 0.30 ±0.03
C0603C0G1E2R4BTX C0G 25V
2.4
±0.10pF 0.30 ±0.03
C0603C0G1E2R4CTX C0G 25V
2.4
±0.25pF 0.30 ±0.03
C0603C0G1E2R7BTX C0G 25V
2.7
±0.10pF 0.30 ±0.03
C0603C0G1E2R7CTX C0G 25V
2.7
±0.25pF 0.30 ±0.03
C0603C0G1E030BTX C0G 25V
3.0
±0.10pF 0.30 ±0.03
C0603C0G1E030CTX C0G 25V
3.0
±0.25pF 0.30 ±0.03
C0603C0G1E3R3BTX C0G 25V
3.3
±0.10pF 0.30 ±0.03
C0603C0G1E3R3CTX C0G 25V
3.3
±0.25pF 0.30 ±0.03
C0603C0G1E3R6BTX C0G 25V
3.6
±0.10pF 0.30 ±0.03
C0603C0G1E3R6CTX C0G 25V
3.6
±0.25pF 0.30 ±0.03
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK MLCC US Catalog Version B11Page 152
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
Capacitance
Range Table C0603 [EIA CC0201]
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
C0603C0G1E3R9BTX C0G 25V
3.9
±0.10pF 0.30 ±0.03
C0603C0G1E3R9CTX C0G 25V
3.9
±0.25pF 0.30 ±0.03
C0603C0G1E040BTX C0G 25V
4.0
±0.10pF 0.30 ±0.03
C0603C0G1E040CTX C0G 25V
4.0
±0.25pF 0.30 ±0.03
C0603C0G1E4R3BTX C0G 25V
4.3
±0.10pF 0.30 ±0.03
C0603C0G1E4R3CTX C0G 25V
4.3
±0.25pF 0.30 ±0.03
C0603C0G1E4R7BTX C0G 25V
4.7
±0.10pF 0.30 ±0.03
C0603C0G1E4R7CTX C0G 25V
4.7
±0.25pF 0.30 ±0.03
C0603C0G1E050BTX C0G 25V
5.0
±0.10pF 0.30 ±0.03
C0603C0G1E050CTX C0G 25V
5.0
±0.25pF 0.30 ±0.03
C0603C0G1E5R1BTX C0G 25V
5.1
±0.10pF 0.30 ±0.03
C0603C0G1E5R1CTX C0G 25V
5.1
±0.25pF 0.30 ±0.03
C0603C0G1E5R6BTX C0G 25V
5.6
±0.10pF 0.30 ±0.03
C0603C0G1E5R6CTX C0G 25V
5.6
±0.25pF 0.30 ±0.03
C0603C0G1E060BTX C0G 25V
6.0
±0.10pF 0.30 ±0.03
C0603C0G1E060CTX C0G 25V
6.0
±0.25pF 0.30 ±0.03
C0603C0G1E6R2BTX C0G 25V
6.2
±0.10pF 0.30 ±0.03
C0603C0G1E6R2CTX C0G 25V
6.2
±0.25pF 0.30 ±0.03
C0603C0G1E6R8BTX C0G 25V
6.8
±0.10pF 0.30 ±0.03
C0603C0G1E6R8CTX C0G 25V
6.8
±0.25pF 0.30 ±0.03
C0603C0G1E070BTX C0G 25V
7.0
±0.10pF 0.30 ±0.03
C0603C0G1E070CTX C0G 25V
7.0
±0.25pF 0.30 ±0.03
C0603C0G1E7R5BTX C0G 25V
7.5
±0.10pF 0.30 ±0.03
C0603C0G1E7R5CTX C0G 25V
7.5
±0.25pF 0.30 ±0.03
C0603C0G1E080BTX C0G 25V
8.0
±0.10pF 0.30 ±0.03
C0603C0G1E080CTX C0G 25V
8.0
±0.25pF 0.30 ±0.03
C0603C0G1E8R2BTX C0G 25V
8.2
±0.10pF 0.30 ±0.03
C0603C0G1E8R2CTX C0G 25V
8.2
±0.25pF 0.30 ±0.03
C0603C0G1E090BTX C0G 25V
9.0
±0.10pF 0.30 ±0.03
C0603C0G1E090CTX C0G 25V
9.0
±0.25pF 0.30 ±0.03
C0603C0G1E9R1BTX C0G 25V
9.1
±0.10pF 0.30 ±0.03
C0603C0G1E9R1CTX C0G 25V
9.1
±0.25pF 0.30 ±0.03
C0603C0G1E100ETX C0G 25V
10
±0.20pF 0.30 ±0.03
C0603C0G1E100DTX C0G 25V
10
±0.50pF 0.30 ±0.03
C0603C0G1E110GTX C0G 25V
11
±2% 0.30 ±0.03
C0603C0G1E110JTX C0G 25V
11
±5% 0.30 ±0.03
C0603C0G1E120GTX C0G 25V
12
±2% 0.30 ±0.03
C0603C0G1E120JTX C0G 25V
12
±5% 0.30 ±0.03
C0603C0G1E130GTX C0G 25V
13
±2% 0.30 ±0.03
C0603C0G1E130JTX C0G 25V
13
±5% 0.30 ±0.03
C0603C0G1E150GTX C0G 25V
15
±2% 0.30 ±0.03
C0603C0G1E150JTX C0G 25V
15
±5% 0.30 ±0.03
C0603C0G1E160GTX C0G 25V
16
±2% 0.30 ±0.03
C0603C0G1E160JTX C0G 25V
16
±5% 0.30 ±0.03
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK MLCC US Catalog Version B11Page 153
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
Capacitance
Range Table C0603 [EIA CC0201]
TDK Part Number
(Ordering Code)
Temperature
Characteristics
Rated
Voltage
Capacitance
(pF)
Capacitance
Tolerance
Thickness
(mm)
C0603C0G1E180GTX C0G 25V
18
±2% 0.30 ±0.03
C0603C0G1E180JTX C0G 25V
18
±5% 0.30 ±0.03
C0603C0G1E200GTX C0G 25V
20
±2% 0.30 ±0.03
C0603C0G1E200JTX C0G 25V
20
±5% 0.30 ±0.03
Class 1 (Temperature Compensating)
Temperature Characteristics: C0G (-55 to 125ºC, 0±30 ppm/ºC)
TDK MLCC US Catalog Version B11Page 154
General
Specifications C0603 Series –High Q Capacitors
No. Item Performance Test or Inspection Method
1External
Appearance
No defects which may affect
performance.
Inspect with magnifying glass (10×).
2Insulation
Resistance
10,000MΩmin. Apply rated voltage for 60s.
3Voltage Proof Withstand test voltage without
insulation breakdown or other damage.
Above DC voltage shall be applied for 1 to 5s. Charge /
discharge current shall not exceed 50mA.
4Capacitance Within the specified tolerance.
5 Q
(Class 1)
C : Rated capacitance (pF)
See No.4 in this table for measuring condition.
6Temperature
Characteristics
of Capacitance
(Class 1) Capacitance drift
Within ±0.2% or ±0.05pF, whichever
larger.
Temperature coefficient shall be calculated based on
values at 25ºC and 85ºC temperature.
Measuring temperature below 20ºC shall be -10ºC and
-25ºC.
7Robustness of
Terminations
No sign of termination coming off,
breakage of ceramic, or other abnormal
signs.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1) and apply a pushing force of 2N for
10±1s.
8Bending No mechanical damage. Reflow solder the capacitor on P.C. board (shown in
Appendix 2) and bend it for 1mm.
Class Apply voltage
Class 1 3 ×rated voltage
Class Measuring
Frequency Measuring voltage
Class 1 1MHz±10% 0.5 -5 Vrms
Rated Capacitance Q
C ≥ 30pF 1,000 min.
C < 30pF 400 + 20×C min.
T.C. Temperature Coefficient
C0G 0 ±30 ppm/ºC
Pushing force
P.C. board
Capacitor
1
20
50 F
R230
45 45
Unit: mm
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog Version B11Page 155
General
Specifications C0603 Series –High Q Capacitors
No. Item Performance Test or Inspection Method
9Solderability New solder to cover over 75% of
termination.
25% may have pinholes or rough spots
but not concentrated in one spot.
Ceramic surface of A sections shall not
be exposed due to melting or shifting of
termination material.
Completely soak both terminations in solder at
235±5ºC for 2±0.5s.
Solder: H63A (JIS Z 3282)
Flux: Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
10 Resistance to solder heat Completely soak both terminations in solder at
260±5ºC for 5±1s.
Preheating condition
Temp.: 150±10ºC
Time : 1 to 2min.
Flux: Isopropyl alcohol (JIS K 8839)
Rosin (JIS K 5902) 25% solid solution.
Solder: H63A (JIS Z 3282)
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
External
appearance
No cracks are allowed and terminations
shall be covered at least 60% with new
solder.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
Insulation
Resistance
Meet the initial spec.
Voltage
Proof
No insulation breakdown or other
damage.
11 Vibration Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Vibrate the capacitor with amplitude of 1.5mm P-P
sweeping the frequencies from 10Hz to 55Hz and back
to 10Hz after 1min.
Repeat this for 2h each in 3 perpendicular directions.
External
appearance
No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
A section
Characteristics Change from the
value before test
Class 1 C0G Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Rated Capacitance Q
C ≥ 30pF 1,000 min.
C < 30pF 400 + 20×C min.
Characteristics Change from the
value before test
Class 1 C0G Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Rated Capacitance Q
C ≥ 30pF 1,000 min.
C < 30pF 400+20×C min.
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog Version B11Page 156
General
Specifications C0603 Series –High Q Capacitors
No. Item Performance Test or Inspection Method
12 Temperature cycle Reflow solder the capacitors on a P.C. board (shown in
Appendix 1) before testing.
Expose the capacitor in the conditions in step 1
through step 4, and repeat 5 times consecutively.
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
External
appearance
No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
Insulation
Resistance
Meet the initial spec.
Voltage
Proof
No insulation breakdown or other
damage.
13 Moisture Resistance (Steady State) Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Leave at temperature 40±2ºC, 90 to 95%RH for 500
+24,0h.
Leave the capacitor in ambient condition for 6 to 24h
before measurement.
External
appearance
No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
Insulation
Resistance
1,000MΩmin.
Characteristics Change from the
value before test
Class 1 C0G Capacitance drift within
±2.5% or ±0.25pF,
whichever larger.
Rated Capacitance Q
C ≥ 30pF 1,000 min.
C < 30pF 400 + 20×C min.
Step Temperature (ºC) Time (min.)
1Min. operating temp. ±330 ±3
2Reference Temp. 2 – 5
3Max. operating temp. ±230 ±2
4Reference Temp. 2 - 5
Characteristics Change from the
value before test
Class 1 C0G Capacitance drift within
±5% or ±0.5pF,
whichever larger.
Rated Capacitance Q
C ≥ 30pF 350 min.
10pF ≤ C < 30pF 275 + 5/2×C min.
C < 10pF 200 + 10×C min.
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog Version B11Page 157
General
Specifications C0603 Series –High Q Capacitors
No. Item Performance Test or Inspection Method
14 Moisture Resistance Reflow solder the capacitors on P.C. board (shown in
Appendix 1) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
Use this measurement for initial value.
External
appearance
No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
Insulation
Resistance
500MΩmin.
15 Life Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Apply 2x rated voltage at 125±2ºC for 1,000 +48, 0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
before measurement.
Use this measurement for initial value.
External
appearance
No mechanical damage.
Capacitance
Q (Class 1)
C : Rated capacitance (pF)
Insulation
Resistance
1,000MΩmin.
Characteristics Change from the
value before test
Class 1 C0G Capacitance drift within
±7.5% or ±0.75pF,
whichever larger.
Rated Capacitance Q
C ≥ 30pF 200 min.
C < 30pF 100 + 10/3×C min.
Characteristics Change from the
value before test
Class 1 C0G Capacitance drift within
±3% or ±0.3pF,
whichever larger.
Rated Capacitance Q
C ≥ 30pF 350 min.
10pF ≤ C < 30pF 275 + 5/2×C min.
C < 10pF 200 + 10×C min.
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog Version B11Page 158
General
Specifications C0603 Series –High Q Capacitors
Appendix -1a
P.C. Board for reliability test
Applied for C0603, C1005, C1608, C2012, C3216
Appendix -2a
P.C. Board for bending test
Applied for C0603, C1005
100 mm
Solder Resist Copper
b
a
c
40 mm
1.0 mm
c
a
b
Solder resist
b
100 mm
Copper
40 mm
Material : Glass Epoxy ( As per JIS C6484 GE4 )
P.C. Board thickness : Appendix -2 0.8mm
Appendix -1 1.6mm
Copper ( thickness 0.035mm )
Solder resist
Case Code Dimensions (mm)
JIS EIA a b c
C0603 CC0201 0.3 0.8 0.3
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog Version B11Page 159
Soldering
Information C0603 Series –High Q Capacitors
Reflow Soldering Unit: mm
Type
Symbol
C0603
[CC0201]
A0.25 ~ 0.35
B0.2 ~ 0.3
C0.25 ~ 0.35
• Recommended Soldering Land Pattern • Recommended Soldering Profile
A
B
C
Chip capacitor Solder land
Solder resist
Excessive
solder
Higher tensile
force on the chip
capacitor may
cause cracking.
Adequate
solder
Insufficient
solder
Small solder fillet
may cause
contact failure or
failure to hold the
chip capacitor to
the P.C. board.
• Recommended Solder Amount
Recommended soldering duration
Temp./
Dura.
Solder
Reflow Soldering
Peak temp
(°C)
Duration
(sec.)
Sn-Pb Solder 230 max. 20 max.
Lead-Free Solder 260 max. 10 max.
Recommended solder compositions
Sn-37Pb (Sn-Pb solder)
Sn-3.0Ag-0.5Cu (Lead Free Solder)
Preheating Condition
Soldering Temp. (ºC)
Reflow soldering ∆T ≤ 150
Manual soldering ∆T ≤ 150
Maximum amount
Minimum amount
Reflow Soldering Manual soldering
(Solder iron)
∆T
Preheating
3sec. (As short as possible)
0
300
Temp (ºC)
Temp (ºC)
0
∆T
Soldering Natural
cooling
Preheating
Peak
Temp
Over 60 sec.
Peak Temp time
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog Version B11Page 160
Packaging
Information C0603 Series –High Q Capacitors
• Carrier Tape Configuration
• Chip Quantity Per Reel and Structure of Reel
• Peel Back Force (Top Tape)
• Carrier tape shall be flexible enough to be
wound around a minimum radius of 30mm with
components in tape.
• The missing of components shall be less than
0.1%
• Components shall not stick to the cover tape.
• The cover tape shall not protrude beyond the
edges of the carrier tape and shall not cover the
sprocket holes.
Paper carrier tape
Pitch hole
Top cover tape
Bottom cover tape
(Bottom cover tape is not always applied)
Paper Carrier Tape & Reel
Case Code Chip
Thickness
(mm)
Taping
Material
Chip quantity (pcs.)
JIS EIA φ178mm (7”) reel
C0603 CC0201 0.30 Paper 15,000
Carrier tape
Top cover tape
Direction & angle of pull
0.05 –0.7 N
0~15°
Bottom cover tape (Paper carrier tape)
Direction of pull force
Drawing direction Leader
400mm min
Bulk
160mm min.
Chips Bulk
160mm min
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.
TDK MLCC US Catalog Version B11Page 161
Additional
Information C0603 Series –High Q Capacitors
• Shape & Dimensions
TDK Corporation established internal product environmental
assurance standards that include the six hazardous
substances banned by the EU RoHS Directive1enforced on
July 1, 2006 along with additional substances independently
banned by TDK and has successfully completed making
general purpose electronic components conform to the
RoHS Directive2.
L
B
G
BW
T
Terminal electrode
Ceramic dielectric
Internal electrode
3
4
5
12
No. NAME MATERIAL
Class 1
(1) Ceramic Dielectric CaZrO3
(2) Internal Electrode Nickel (Ni)
(3)
Termination
Copper (Cu)
(4) Nickel (Ni)
(5) Tin (Sn)
• Inside Structure & Material System
Case Code Dimensions (mm)
JIS EIA L W T B G
C0603 CC0201 0.60 0.30 0.30 0.15 0.20 min.
• Environmental Information
1. Abbreviation for Restriction on Hazardous
Substances, which refers to the regulation EU
Directive 2002/95/EC on hazardous substances by
the European Union (EU) effective from July 1, 2006.
The Directive bans the use of six specific hazardous
substances in electric and electronic devices and
products handled within the EU. The six substances
are lead, mercury, cadmium, hexavalent chromium,
PBB (polybrominated biphenyls), and PBDE
(polybrominated diphenyl ethers).
2. This means that, in conformity with the EU Directive
2002/95/EC, lead, cadmium, mercury, hexavalent
chromium, and specific bromine-based flame
retardants, PBB and PBDE, have not been used,
except for exempted applications.
For REACH (SVHC : 15 substances according to ECHA /
October 2008) : All TDK MLCC do not contain these
15 substances.
For European Directive 2000/53/CE and 2005/673/CE :
Cadmium, Hexavalent Chromium, Mercury, Lead are
not contained in all TDK MLCC.
For European Directive 2003/11/CE : Pentabromodiphenyl-
ether, Octabromodiphenyl-ether are not contained in
all TDK MLCC.
* This series is available through the distribution channel only. Please see www.tdk.com/distributor.php for a list of authorized distributors.