Emboss Tape SHLV CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications ------------------- This is the wire to board connector corresponding to the high frequency transmission (LVDS: Low Voltage Differential Signaling) with a lot of adoption for PDP, LCD - TV and so on. This connector was developed to have excellent workability, strength and cost performance. This connector is used not only for LVDS, but also for multi - circuits connector (small and space saving type) in normal circuit. * Corresponding to LVDS (Low Voltage Differential Signaling) * Secure locking structure * Connector strength * Contact locking structure * Current rating: 1.0A AC, DC (AWG #28) * Voltage rating: 30V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/30m max. After environmental testing/50m max. * Insulation resistance: 100M min. * Withstanding voltage: 500V AC/minute * Applicable wire: Conductor size/AWG #32 to #28 Insulation O.D./0.4 to 0.8mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 PC board layout (viewed from component side) and Assembly layout 0.7 0.05 1.0 0.05 A 0.05 0.5 0.05 0.3 0.05 7.95 1.6 0.05 Side entry type 5.0 0.3 0.05 2.6 0.05 6.65 0.05 1.6 0.05 0.6 0.05 1.6 0.05 Circuit No.1 Circuit No.1 0.05 0.3 0.5 0.05 Connector outline A Connector outline 0.7 0.05 0.05 8.5 5.15 0.7 0.05 0.3 0.05 2.6 0.05 4.4 0.05 6.0 0.05 Top entry type 1.6 0.05 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. Note: 2. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire mm2 AWG# Model No. SSHL-003GA1-P0.2 0.0320.08 4.75 Insulation O.D. (mm) Q'ty / reel 0.40.8 30,000 3228 2.0 0.5 0.8 2.35 Material and Finish 0.8 Phosphor bronze, nickel-undercoated, Mating part; gold-plated, Crimping part; gold-plated 0.4 RoHS compliance Contact Crimping machine Crimp applicator SSHL-003GA1-P0.2 AP-K2N Applicator Dies Crimp applicator with dies MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 *MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHLV CONNECTOR Housing With secure lock Circuits Model No. 21 SHLVP-21V-S-1 SHLVP-31V-S-1 31 A B A Dimensions (mm) B C Q'ty / bag 10.0 16.7 17.7 3,000 15.0 21.7 22.7 2,000 Material 1.0 N 6.0 5.7 2.6 PBT, UL94V-0, natural(white) <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. 11 4.6 Circuit No.1 mark RoHS compliance C ex. SHLVP-21V-S-1 S...natural (white) LE...light blue Shrouded header Top entry type Circuits 21 4.7 31 Circuits 1.05 0.2 0.5 2.0 0.7 5.0 21 31 A Model No. Top entry type BM21B-SHLVS-G-TBT BM31B-SHLVS-G-TBT Dimensions (mm) A B Model No. Side entry type SM21B-SHLVS-G-TB SM31B-SHLVS-G-TB Dimensions (mm) A B Q'ty / reel 10.0 15.0 1,500 15.0 20.0 1,500 Q'ty / reel 10.0 15.0 2,000 15.0 20.0 2,000 B Material and Finish Contact: Phosphor bronze, nickel-undercoated, gold-plated Wafer: Polyamide, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Side entry type 5.0 RoHS compliance This product displays (LF)(SN) on a label. This products listed above are supplied on embossed-tape. A B 2.0 4.7 0.7 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. <Top entry type> ex. BM21B-SHLVS-G-TBT S...natural (ivory) LE...light blue <Side entry type> ex. SM21B-SHLVS-G-TB S...natural (ivory) LE...light blue 2