Revised January 2001 NC7SZ05 TinyLogic UHS Inverter (Open Drain Output) General Description Features The NC7SZ05 is a single Inverter with open drain output stage from Fairchild's Ultra High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The input and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. The open drain output stage tolerates voltages up to 6V independent of VCC when in the high impedance state. Space saving SOT23 or SC70 5-lead package Open drain output for OR tied applications Ultra High Speed; tPD 1.9 ns Typ into 50 pF at 5V VCC High Output IOL Drive; +24 mA at 3V VCC Broad VCC Operating Range; 1.65V to 5.5V Matches the performance of LCX when operated at 3.3V VCC Power down high impedance inputs/output Overvoltage Tolerant inputs facilitate 5V to 3V translation Patented noise/EMI reduction circuitry implemented Ordering Code: Order Package Product Code Number Number Top Mark NC7SZ05M5 MA05B 7Z05 5-Lead SOT23, JEDEC MO-178, 1.6mm NC7SZ05M5X MA05B 7Z05 5-Lead SOT23, JEDEC MO-178, 1.6mm 3k Units on Tape and Reel NC7SZ05P5 MAA05A Z05 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 250 Units on Tape and Reel NC7SZ05P5X MAA05A Z05 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3k Units on Tape and Reel Package Description Logic Symbol Supplied As 250 Units on Tape and Reel Connection Diagram IEEE/IEC (Top View) Pin Descriptions Function Table Pin Names Y=A Description A Input Y Output A Y No Connect L *H H L NC Input Output H = HIGH Logic Level L = LOW Logic Level *H = HIGH Impedance output state (Open Drain) TinyLogic is a trademark of Fairchild Semiconductor Corporation. (c) 2001 Fairchild Semiconductor Corporation DS012174 www.fairchildsemi.com NC7SZ05 TinyLogic UHS Inverter (Open Drain Output) June 1997 NC7SZ05 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) Supply Voltage (VCC ) -0.5V to +6V DC Input Voltage (VIN) -0.5V to +6V Supply Voltage Operating (VCC) DC Output Voltage (VOUT) -0.5V to +6V Supply Voltage Data Retention (VCC) DC Input Diode Current (IIK) 1.65V to 5.5V 1.5V to 5.5V Input Voltage (VIN) 0V to 5.5V @VIN < -0.5V -50 mA Output Voltage (VOUT) @ VIN > 6V +20 mA Operating Temperature (TA) DC Output Diode Current (IOK) 0V to 5.5V -40C to +85C Input Rise and Fall Time (tr, tf) @VOUT < -0.5V -50 mA VCC = 1.8V, 2.5V 0.2V 0 ns/V to 20 ns/V @ VOUT > 6V, VCC = GND +20 mA VCC = 3.3V 0.3V 0 ns/V to 10 ns/V VCC = 5.0V 0.5V 0 ns/V to 5 ns/V DC Output Current (IOUT) +50 mA DC VCC/GND Current (ICC/IGND) 50 mA Thermal Resistance (JA) -65C to +150 C Storage Temperature (TSTG) 150 C Junction Temperature under Bias (TJ) Junction Lead Temperature (T1); SOT23-5 300C/W SC70-5 425C/W SOT23-5 200 mW Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specification should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. SC70-5 150 mW Note 2: Unused inputs must be held HIGH or LOW. They may not float. 260 C (Soldering, 10 seconds) Power Dissipation (PD) @ +85C DC Electrical Characteristics Symbol Parameter TA = +25C VCC (V) Min Typ TA = -40C to +85C Max Min Max VIH HIGH Level Input Voltage 1.65 to 1.95 0.75 VCC VIL LOW Level Input Voltage 1.65 to 1.95 0.25 VCC 0.25 VCC 2.3 to 5.5 0.3 VCC 0.3 VCC ILKG HIGH Level Output 1.65 to 5.5 5 10 2.3 to 5.5 Leakage Current VOL LOW Level Output Voltage IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current www.fairchildsemi.com 0.75 VCC 0.7 VCC Unit Conditions V 0.7 VCC 1.65 0.0 0.1 0.1 1.8 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 V A V VIN = VIL VOUT = VCC or GND VIN = VIH IOL = 100 A 4.5 0.0 0.1 0.1 1.65 0.08 0.24 0.24 IOL = 4 mA 2.3 0.10 0.3 0.3 IOL = 8 mA 3.0 0.15 0.4 0.4 3.0 0.22 0.55 0.55 4.5 0.22 0.55 0.55 1 10 A 0 VIN 5.5V 0 to 5.5 V IOL = 16 mA IOL = 24 mA IOL = 32 mA 0.0 1 10 A VIN or VOUT = 5.5V 1.65 to 5.5 2.0 20 A VIN = 5.5V, GND 2 Symbol tPZL tPLZ Parameter Propagation Delay Propagation Delay TA = +25C VCC TA = 40C to +85C (V) Min Typ Max Min Max 1.65 1.5 5.5 12.9 1.5 13.4 Units Conditions 1.8 1.5 4.6 10.5 1.5 11.0 CL = 50 pF 2.5 0.2 0.8 3.0 7.0 0.8 7.5 RU = 500 3.3 0.3 0.8 2.4 5.0 0.8 5.2 RD = 500 5.0 0.5 0.5 1.9 4.3 0.5 4.5 1.65 1.5 5.0 12.9 1.5 13.4 VI = 2 x VCC 1.8 1.5 4.1 10.5 1.5 11.0 CL = 50 pF 0.8 2.5 7.0 0.8 7.5 RU = 500 3.3 0.3 0.8 2.1 5.0 0.8 5.2 RD = 500 5.0 0.5 0.5 1.2 4.3 0.5 4.5 Input Capacitance 0 COUT Output Capacitance CPD Power Dissipation Capacitance 5.0 6.5 Figures 1, 3 ns 2.5 0.2 CIN Fig. No. ns Figures 1, 3 VI = 2 x VCC 4 pF 0 6 pF 3.3 3.6 pF (Note 3) Figure 2 Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD) (VCC) (fIN) + (ICC static) AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit FIGURE 3. AC Waveforms Input = AC Waveform; tr = tf = 1.8 ns PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. AC Test Circuit 3 www.fairchildsemi.com NC7SZ05 AC Electrical Characteristics NC7SZ05 Tape and Reel Specification TAPE FORMAT Package Designator Tape Number Cavity Section Cavities Status Status 125 (typ) Empty Sealed Sealed Leader (Start End) M5, P5 Carrier M5X, P5X Cover Tape 250 Filled Trailer (Hub End) 75 (typ) Empty Sealed Leader (Start End) 125 (typ) Empty Sealed 3000 Filled Sealed 75 (typ) Empty Sealed Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm www.fairchildsemi.com DIM A DIM B 0.093 0.096 (2.35) (2.45) 0.130 0.130 (3.3) (3.3) DIM F DIM Ko 0.138 0.004 0.053 0.004 (3.5 0.10) (1.35 0.10) 0.138 0.002 0.055 0.004 (3.5 0.05) 4 (1.4 0.11) DIM P1 DIM W 0.157 0.315 0.004 (4) (8 0.1) 0.157 0.315 0.012 (4) (8 0.3) NC7SZ05 Tape and Reel Specification (Continued) REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/-0.000 0.567 W1 + 0.078/-0.039 (177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/-0.00) (14.40) (W1 + 2.00/-1.00) 5 www.fairchildsemi.com NC7SZ05 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B www.fairchildsemi.com 6 NC7SZ05 TinyLogic UHS Inverter (Open Drain Output) Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 7 www.fairchildsemi.com