Commercial Grade High Pressure Sensors 20PC Family FEATURES * Lowest priced sensor with temperature compensation and calibration * Variety of gage pressure port configurations; easily modified for special needs * Operable after exposure to frozen conditions * Choice of terminations for gage sensors * Calibrated Null and Span * Temperature compensated for Span over 0C to 50C provides interchangeability * Measures vacuum or positive pressure * Ideal for wet/wet applications TYPICAL APPLICATIONS Medical * Oxygen and nitrogen gas distribution in hospitals * Dental chairs * Water flow measurement Environmental * Water control valves * Instrumentation * Irrigation equipment * Filter monitoring equipment Industrial Instrumentation * Robotics * Pressure valves * Leak detection * Air compressors Analytical Instrumentation * Gas chromatography 20PC Series The 20PC family has added a new range to its already high pressure sensor family. The 250 psi range is now being offered in our 26PC family. This pressure range completes a full complement of pressure ranges that are compensated over temperature and calibrated at zero and full scale. The addition of the 250 psi pressure range permits greater flexibility in the design of this product family. The factory calibrated 26PC Series sensors are temperature compensated (0 to 50C), allowing part interchangeability, high performance, reliability, and accuracy. The lower cost noncompensated 24PC Series sensors are ideal for on-system calibration applications. These versatile 20PC Series products can meet many pressure sensing requirements in the commercial/consumer marketplace. Pressure ranges are from 0.5 psi to 250 psi in the 20PC family. The extensive port options available for the 20PC Series sensors promote the application flexibility of Honeywell's commercial grade high pressure sensing options. WARNING MISUSE OF DOCUMENTATION * The information presented in this product sheet is for reference only. Do not use this document as product installation information. * Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Commercial Grade High Pressure Sensors 20PC Series 20PC Family 26PC Series Performance Characteristics at 10.0 0.01 Vdc Excitation, 25C Excitation Response Time Input Resistance Output Resistance Weight Min. Typ. Max. Units -- -- 5.5 k 1.5 k 10 -- 7.5 k 2.5 k 2 16 1.0 11.5 k 3.0 k Vdc ms Ohm Ohm gram Environmental Specifications Operating Temperature Storage Temperature Compensated Temperature Shock Vibration -40C to +85C (-40F to +185F) -55C to +100C (-67F to +212F) 0C to +50C (32F to +122F) Qualification tested to 150 g MIL-STD-202, Method 213 (0 to 2 kHz, 20 G sine) NOTE: For media compatibility specifications, refer to Catalog 15, 007908-11, or web site: www.honeywell.com/sensing 26PC PORT VARIATIONS (dimensions for reference only) mm/in B Barbed H M5 Thread* M 1/4-28 Thread** S Manifold *Recommended torque for sealing is 4 in-lb. Do not exceed 6 in-lb of torque. Use size 007 O-Ring. O-Ring counterbore dimensions are 0.04 .005 in D x 0.300 .003 in Dia. **Recommended torque for sealing is 8 in-lb. Do not exceed 12 in-lb. Use size 009 O-Ring. O-Ring counterbore dimensions are .040 .002 in D x 0.360 .003 in Dia. 26PC CIRCUIT TERMINATION Pin 1 = Vs (+) Pin 2 = Output (+) Pin 3 = Ground (-) Pin 4 = Output (-) Pin 1 is notched, Pin 2 is next to Pin 1, etc. 2 Honeywell * Sensing and Control www.honeywell.com/sensing Commercial Grade High Pressure Sensors 20PC Family MOUNTING DIMENSIONS (for reference only) mm/in GAGE SENSOR 1 x 4 Termination (Style 6) Port Style A, Straight Pin 1 is notched, Pin 2 is next to Pin 1, etc. 20PC Series 2 x 2 Termination (Style 2) Port Style A, Straight Pin 1 is notched, Pin 1 is shown at lower right corner. Pins 2, 3, 4 are clockwise. DIFFERENTIAL SENSOR 1 X 4 Termination (Style 6) Port Style A, Straight (Only) www.honeywell.com/sensing Honeywell * Sensing and Control 3 Commercial Grade High Pressure Sensors 20PC Pressure Sensors 20PC Series 26PC FAMILY SENSOR SELECTION GUIDE 2 6 PC G F A Product Family Circuit Type Pressure Sensor Pressure Range Seal Type Port Type 2 20PC Family 6 Compensated Calibrated A B C D F G J K 1 psi 5 psi 15 psi 30 psi 100 psi 250 psi 38 psi 38 psi* E F N S EPDM Fluorosilicone Neoprene Silicone A B H M S 2 Termination Style Straight 2 4-pin DIP Barbed 6 4-pin SIP M5 Thread 1/4-28 Thread Manifold G Pressure Measurement G Gage D Differential Example: 26PCGFA2G Compensated, calibrated 250 psi sensor with fluorosilicone seal, straight port, 2 X 2 termination and gage pressure measurement. * Passivated (P2 side of die is coated for environmental and dielectric protection) WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Sensing and Control Honeywell 11 West Spring Street Freeport, Illinois 61032 Printed with Soy Ink on 50% Recycled Paper 008062-1-EN IL50 GLO 0900 Printed in USA www.honeywell.com/sensing For application assistance, current specifications, or name of the nearest Authorized Distributor, check the Honeywell web site or call: 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET www.honeywell.com/sensing info.sc@honeywell.com