11
CLD-DS50 REV 9
PRODUCT FAMILY DATA SHEET
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the
Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
WWW.CREE.COM/XLAMP
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Cree® XLamp® CXA1507 LED
PRODUCT DESCRIPTION
The XLamp® CXA1507 LED array
expands Cree’s family of high‑ux,
multi-die arrays in a smaller, easy-
to-use platform. With XLamp
LED lighting-class reliability,
the CXA1507’s small, uniform
emitting surface enables both
directional and non-directional
lighting applications including lamp
retrot and luminaire designs.
Available in 2-step and 4-step color
consistency, and featuring a 9-mm
optical source, the CXA1507 brings
new levels of ux and efcacy to
this form factor.
The CX Family LED Design Guide
provides basic information on the
requirements to use the CXA1507
LED successfully in luminaire
designs.
FEATURES
• Available in ANSI white bins
as well as 4-step and 2-step
EasyWhite® bins at 2700 K,
3000 K, 3500 K, 4000 K and
5000 K
• Available in ANSI white bins as
well as 4-step EasyWhite bins
at 5700 K and 6500 K CCT
• Available in 70-, 80-, 90- and
93-minimum CRI options
• Forward voltage options: 18-V
class & 36-V class
• 85 °C binning and
characterization
• Maximum drive current:
750 mA (18 V), 375 mA (36 V)
• 115° viewing angle, uniform
chromaticity profile
• Top-side solder connections
• Thermocouple attach point
• NEMA SSL‑3 2011 standard ux
bins
• RoHS- and REACh-compliant
• UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics .............................. 2
Operating Limits ............................ 3
Flux Characteristics, EasyWhite®
Order Codes and Bins - 18 V ........... 4
Flux Characteristics, ANSI White
Order Codes and Bins - 18 V ........... 7
Flux Characteristics, EasyWhite®
Order Codes and Bins - 36 V ..........10
Flux Characteristics, ANSI White
Order Codes and Bins - 36 V ..........14
Relative Spectral Power
Distribution..................................18
Electrical Characteristics ................19
Relative Luminous Flux .................. 20
Typical Spatial Distribution .............22
Performance Groups - Brightness .... 22
Performance Groups - Chromaticity . 23
Cree EasyWhite® Bins Plotted on
the 1931 CIE Color Space ..............25
Cree ANSI White Bins Plotted on
the 1931 CIE Color Space ..............26
Bin and Order Code Formats ..........27
Mechanical Dimensions..................27
Thermal Design ............................28
Notes .......................................... 30
Packaging ....................................31
22
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® CXa1507 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Viewing angle (FWHM) degrees 115
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current (18 V) mA 750*
DC forward current (36 V) mA 375*
Reverse current 18 V, 36 V) mA 0.1
Forward voltage (18 V, 400 mA, 85 °C) V 17.5
Forward voltage (18 V, 400 mA, 25 °C) V 21
Forward voltage (36 V, 200 mA, 85 °C) V 35
Forward voltage (36 V, 200 mA, 25 °C) V 42
* Refer to the Operating Limits section.
33
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® CXa1507 LED
OPERATING LIMITS
The maximum current rating of the CXA1507 is dependent on the case temperature (Tc) when the LED has reached
thermal equilibrium under steady-state operation. The graphs shown below assume that the system design employs
good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is
employed. Please refer to the Mechanical Dimensions section on page 27 for the location of the Tc measurement point.
CXA1507 - 18 V
0
100
200
300
400
500
600
700
800
0 25 50 75 100 125 150
If (mA)
Case Temperature (°C)
18 V
CXA1507 - 36 V
0
50
100
150
200
250
300
350
400
0 25 50 75 100 125 150
If (mA)
Case Temperature (°C)
36 V
44
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18 V (IF = 400 mA,
TJ = 85 °C)
The following table provides order codes for XLamp CXA1507 LEDs. For a complete description of the order code
nomenclature, please see the Bin and Order Code Formats section (page 27).
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 400 mA
2-Step 4-Step
Min Typ Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
Chromaticity
Region Order Code Chromaticity
Region Order Code
6500 K
70 75
G2 780 871
65F
CXA1507-0000-000F00G265F
G4 840 938 CXA1507-0000-000F00G465F
H2 900 1005 CXA1507-0000-000F00H265F
H4 970 1084 CXA1507-0000-000F00H465F
80 ---
F4 730 815
65F
CXA1507-0000-000F0HF465F
G2 780 871 CXA1507-0000-000F0HG265F
G4 840 938 CXA1507-0000-000F0HG465F
H2 900 1005 CXA1507-0000-000F0HH265F
5700 K
70 75
G2 780 871
57F
CXA1507-0000-000F00G257F
G4 840 938 CXA1507-0000-000F00G457F
H2 900 1005 CXA1507-0000-000F00H257F
H4 970 1084 CXA1507-0000-000F00H457F
80 ---
F4 730 815
57F
CXA1507-0000-000F0HF457F
G2 780 871 CXA1507-0000-000F0HG257F
G4 840 938 CXA1507-0000-000F0HG457F
H2 900 1005 CXA1507-0000-000F0HH257F
55
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 400 mA
2-Step 4-Step
Min Typ Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
Chromaticity
Region Order Code Chromaticity
Region Order Code
5000 K
70 75
G2 780 871
50H
CXA1507-0000-000F00G250H
50F
CXA1507-0000-000F00G250F
G4 840 938 CXA1507-0000-000F00G450H CXA1507-0000-000F00G450F
H2 900 1005 CXA1507-0000-000F00H250H CXA1507-0000-000F00H250F
H4 970 1084 CXA1507-0000-000F00H450H CXA1507-0000-000F00H450F
80 ---
F4 730 815
50H
CXA1507-0000-000F0HF450H
50F
CXA1507-0000-000F0HF450F
G2 780 871 CXA1507-0000-000F0HG250H CXA1507-0000-000F0HG250F
G4 840 938 CXA1507-0000-000F0HG450H CXA1507-0000-000F0HG450F
H2 900 1005 CXA1507-0000-000F0HH250H CXA1507-0000-000F0HH250F
90 95
E4 635 709
50H
CXA1507-0000-000F0UE450H
50F
CXA1507-0000-000F0UE450F
F2 680 759 CXA1507-0000-000F0UF250H CXA1507-0000-000F0UF250F
F4 730 815 CXA1507-0000-000F0UF450H CXA1507-0000-000F0UF450F
G2 780 871 CXA1507-0000-000F0UG250H CXA1507-0000-000F0UG250F
4000 K
70 75
F4 730 815
40H
CXA1507-0000-000F00F440H
40F
CXA1507-0000-000F00F440F
G2 780 871 CXA1507-0000-000F00G240H CXA1507-0000-000F00G240F
G4 840 938 CXA1507-0000-000F00G440H CXA1507-0000-000F00G440F
H2 900 1005 CXA1507-0000-000F00H240H CXA1507-0000-000F00H240F
H4 970 1084 CXA1507-0000-000F00H440H CXA1507-0000-000F00H440F
80 ---
F4 730 815
40H
CXA1507-0000-000F0HF440H
40F
CXA1507-0000-000F0HF440F
G2 780 871 CXA1507-0000-000F0HG240H CXA1507-0000-000F0HG240F
G4 840 938 CXA1507-0000-000F0HG440H CXA1507-0000-000F0HG440F
90 95
E2 590 659
40H
CXA1507-0000-000F0UE240H
40F
CXA1507-0000-000F0UE240F
E4 635 709 CXA1507-0000-000F0UE440H CXA1507-0000-000F0UE440F
F2 680 759 CXA1507-0000-000F0UF240H CXA1507-0000-000F0UF240F
F4 730 815 CXA1507-0000-000F0UF440H CXA1507-0000-000F0UF440F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18 V (IF = 400 mA,
TJ = 85 °C) - CONTINUED
66
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 400 mA
2-Step 4-Step
Min Typ Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
Chromaticity
Region Order Code Chromaticity
Region Order Code
3500 K
80 ---
F2 680 759
35H
CXA1507-0000-000F00F235H
35F
CXA1507-0000-000F00F235F
F4 730 815 CXA1507-0000-000F00F435H CXA1507-0000-000F00F435F
G2 780 871 CXA1507-0000-000F00G235H CXA1507-0000-000F00G235F
G4 840 938 CXA1507-0000-000F00G435H CXA1507-0000-000F00G435F
H2 900 1005 CXA1507-0000-000F00H235H CXA1507-0000-000F00H235F
93 95
D4 550 614
35H
CXA1507-0000-000F0YD435H
35F
CXA1507-0000-000F0YD435F
E2 590 659 CXA1507-0000-000F0YE235H CXA1507-0000-000F0YE235F
E4 635 709 CXA1507-0000-000F0YE435H CXA1507-0000-000F0YE435F
F2 680 759 CXA1507-0000-000F0YF235H CXA1507-0000-000F0YF235F
3000 K
80 ---
F2 680 759
30H
CXA1507-0000-000F00F230H
30F
CXA1507-0000-000F00F230F
F4 730 815 CXA1507-0000-000F00F430H CXA1507-0000-000F00F430F
G2 780 871 CXA1507-0000-000F00G230H CXA1507-0000-000F00G230F
G4 840 938 CXA1507-0000-000F00G430H CXA1507-0000-000F00G430F
93 95
D2 510 569
30H
CXA1507-0000-000F0YD230H
30F
CXA1507-0000-000F0YD230F
D4 550 614 CXA1507-0000-000F0YD430H CXA1507-0000-000F0YD430F
E2 590 659 CXA1507-0000-000F0YE230H CXA1507-0000-000F0YE230F
E4 635 709 CXA1507-0000-000F0YE430H CXA1507-0000-000F0YE430F
2700 K
80 ---
E4 635 709
27H
CXA1507-0000-000F00E427H
27F
CXA1507-0000-000F00E427F
F2 680 759 CXA1507-0000-000F00F227H CXA1507-0000-000F00F227F
F4 730 815 CXA1507-0000-000F00F427H CXA1507-0000-000F00F427F
G2 780 871 CXA1507-0000-000F00G227H CXA1507-0000-000F00G227F
G4 840 938 CXA1507-0000-000F00G427H CXA1507-0000-000F00G427F
93 95
C4 475 530
27H
CXA1507-0000-000F0YC427H
27F
CXA1507-0000-000F0YC427F
D2 510 569 CXA1507-0000-000F0YD227H CXA1507-0000-000F0YD227F
D4 550 614 CXA1507-0000-000F0YD427H CXA1507-0000-000F0YD427F
E2 590 659 CXA1507-0000-000F0YE227H CXA1507-0000-000F0YE227F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 18 V (IF = 400 mA,
TJ = 85 °C) - CONTINUED
77
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 18 V (IF = 400 mA,
TJ = 85 °C)
The following table provides order codes for XLamp CXA1507 LEDs. For a complete description of the order code
nomenclature, please see the Bin and Order Code Formats section (page 27).
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 400 mA Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
6500 K
70 75
G2 780 871
1A0, 1B0, 1C0, 1D0
CXA1507-0000-000F00G20E1
G4 840 938 CXA1507-0000-000F00G40E1
H2 900 1005 CXA1507-0000-000F00H20E1
H4 970 1084 CXA1507-0000-000F00H40E1
80 ---
F4 730 815
1A0, 1B0, 1C0, 1D0
CXA1507-0000-000F0HF40E1
G2 780 871 CXA1507-0000-000F0HG20E1
G4 840 938 CXA1507-0000-000F0HG40E1
H2 900 1005 CXA1507-0000-000F0HH20E1
5700 K
70 75
G2 780 871
2A0, 2B0, 2C0, 2D0
CXA1507-0000-000F00G20E2
G4 840 938 CXA1507-0000-000F00G40E2
H2 900 1005 CXA1507-0000-000F00H20E2
H4 970 1084 CXA1507-0000-000F00H40E2
80 ---
F4 730 815
2A0, 2B0, 2C0, 2D00
CXA1507-0000-000F0HF40E2
G2 780 871 CXA1507-0000-000F0HG20E2
G4 840 938 CXA1507-0000-000F0HG40E2
H2 900 1005 CXA1507-0000-000F0HH20E2
88
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 400 mA Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
5000 K
70 75
G2 780 871
3A0, 3B0, 3C0, 3D0
CXA1507-0000-000F00G20E3
G4 840 938 CXA1507-0000-000F00G40E3
H2 900 1005 CXA1507-0000-000F00H20E3
H4 970 1084 CXA1507-0000-000F00H40E3
80 ---
F4 730 815
3A0, 3B0, 3C0, 3D0
CXA1507-0000-000F0HF40E3
G2 780 871 CXA1507-0000-000F0HG20E3
G4 840 938 CXA1507-0000-000F0HG40E3
H2 900 1005 CXA1507-0000-000F0HH20E3
90 95
E4 635 709
3A0, 3B0, 3C0, 3D0
CXA1507-0000-000F0UE40E3
F2 680 759 CXA1507-0000-000F0UF20E3
F4 730 815 CXA1507-0000-000F0UF40E3
G2 781 871 CXA1507-0000-000F0UG20E3
4000 K
70 75
F4 730 815
5A0, 5B0, 5C0, 5D0
CXA1507-0000-000F00F40E5
G2 780 871 CXA1507-0000-000F00G20E5
G4 840 938 CXA1507-0000-000F00G40E5
H2 900 1005 CXA1507-0000-000F00H20E5
H4 970 1084 CXA1507-0000-000F00H40E5
80 ---
F4 780 815
5A0, 5B0, 5C0, 5D0
CXA1507-0000-000F0HF40E5
G2 780 871 CXA1507-0000-000F0HG20E5
G4 840 938 CXA1507-0000-000F0HG40E5
H2 900 1005 CXA1507-0000-000F0HH20E5
90 95
E2 590 659
5A0, 5B0, 5C0, 5D0
CXA1507-0000-000F0UE20E5
E4 635 709 CXA1507-0000-000F0UE40E5
F2 680 759 CXA1507-0000-000F0UF20E5
F4 730 815 CXA1507-0000-000F0UF40E5
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 18 V (IF = 400 mA,
TJ = 85 °C) - CONTINUED
99
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 400 mA Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
3500 K
80 ---
F2 680 759
6A0, 6B0, 6C0, 6D0
CXA1507-0000-000F00F20E6
F4 730 815 CXA1507-0000-000F00F40E6
G2 780 871 CXA1507-0000-000F00G20E6
G4 840 938 CXA1507-0000-000F00G40E6
H2 900 1005 CXA1507-0000-000F00H20E6
93 95
D4 550 614
6A0, 6B0, 6C0, 6D0
CXA1507-0000-000F0YD40E6
E2 590 659 CXA1507-0000-000F0YE20E6
E4 635 709 CXA1507-0000-000F0YE40E6
F2 680 759 CXA1507-0000-000F0YF20E6
3000 K
80 ---
F2 680 759
7A0, 7B0, 7C0, 7D0
CXA1507-0000-000F00F20E7
F4 730 815 CXA1507-0000-000F00F40E7
G2 780 871 CXA1507-0000-000F00G20E7
G4 840 938 CXA1507-0000-000F00G40E7
93 95
D2 510 569
7A0, 7B0, 7C0, 7D0
CXA1507-0000-000F0YD20E7
D4 550 614 CXA1507-0000-000F0YD40E7
E2 590 659 CXA1507-0000-000F0YE20E7
E4 635 709 CXA1507-0000-000F0YE40E7
2700 K
80 ---
E4 635 709
8A0, 8B0, 8C0, 8D0
CXA1507-0000-000F00E40E8
F2 680 759 CXA1507-0000-000F00F20E8
F4 730 815 CXA1507-0000-000F00F40E8
G2 780 871 CXA1507-0000-000F00G20E8
G4 840 938 CXA1507-0000-000F00G40E8
93 95
C4 475 530
8A0, 8B0, 8C0, 8D0
CXA1507-0000-000F0YC40E8
D2 510 569 CXA1507-0000-000F0YD20E8
D4 550 614 CXA1507-0000-000F0YD40E8
E2 590 659 CXA1507-0000-000F0YE20E8
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 18 V (IF = 400 mA,
TJ = 85 °C) - CONTINUED
1010
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C)
The following table provides order codes for XLamp CXA1507 LEDs. For a complete description of the order code
nomenclature, please see the Bin and Order Code Formats section (page 27).
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA
2-Step 4-Step
Min Typ Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
Chromaticity
Region Order Code Chromaticity
Region Order Code
6500 K
70 75
G2 780 871
65F
CXA1507-0000-000N00G265F
G4 840 938 CXA1507-0000-000N00G465F
H2 900 1005 CXA1507-0000-000N00H265F
H4 970 1084 CXA1507-0000-000N00H465F
80 ---
F4 730 815
65F
CXA1507-0000-000N0HF465F
G2 780 871 CXA1507-0000-000N0HG265F
G4 840 938 CXA1507-0000-000N0HG465F
H2 900 1005 CXA1507-0000-000N0HH265F
5700 K
70 75
G2 780 871
57F
CXA1507-0000-000N00G257F
G4 840 938 CXA1507-0000-000N00G457F
H2 900 1005 CXA1507-0000-000N00H257F
H4 970 1084 CXA1507-0000-000N00H457F
80 ---
F4 730 815
57F
CXA1507-0000-000N0HF457F
G2 780 871 CXA1507-0000-000N0HG257F
G4 840 938 CXA1507-0000-000N0HG457F
H2 900 1005 CXA1507-0000-000N0HH257F
1111
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C) - CONTINUED
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA
2-Step 4-Step
Min Typ Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
Chromaticity
Region Order Code Chromaticity
Region Order Code
5000 K
70 75
G2 780 871
50H
CXA1507-0000-000N00G250H
50F
CXA1507-0000-000N00G250F
G4 840 938 CXA1507-0000-000N00G450H CXA1507-0000-000N00G450F
H2 900 1005 CXA1507-0000-000N00H250H CXA1507-0000-000N00H250F
H4 970 1084 CXA1507-0000-000N00H450H CXA1507-0000-000N00H450F
80 ---
F4 730 815
50H
CXA1507-0000-000N0HF450H
50F
CXA1507-0000-000N0HF450F
G2 780 871 CXA1507-0000-000N0HG250H CXA1507-0000-000N0HG250F
G4 840 938 CXA1507-0000-000N0HG450H CXA1507-0000-000N0HG450F
H2 900 1005 CXA1507-0000-000N0HH250H CXA1507-0000-000N0HH250F
90 95
E4 635 709
50H
CXA1507-0000-000N0UE450H
50F
CXA1507-0000-000N0UE450F
F2 680 759 CXA1507-0000-000N0UF250H CXA1507-0000-000N0UF250F
F4 730 815 CXA1507-0000-000N0UF450H CXA1507-0000-000N0UF450F
G2 780 871 CXA1507-0000-000N0UG250H CXA1507-0000-000N0UG250F
4000 K
70 75
F4 730 815
40H
CXA1507-0000-000N00F440H
40F
CXA1507-0000-000N00F440F
G2 780 871 CXA1507-0000-000N00G240H CXA1507-0000-000N00G240F
G4 840 938 CXA1507-0000-000N00G440H CXA1507-0000-000N00G440F
H2 900 1005 CXA1507-0000-000N00H240H CXA1507-0000-000N00H240F
H4 970 1084 CXA1507-0000-000N00H440H CXA1507-0000-000N00H440F
80 ---
F4 730 815
40H
CXA1507-0000-000N0HF440H
40F
CXA1507-0000-000N0HF440F
G2 780 871 CXA1507-0000-000N0HG240H CXA1507-0000-000N0HG240F
G4 840 938 CXA1507-0000-000N0HG440H CXA1507-0000-000N0HG440F
90 95
E2 590 659
40H
CXA1507-0000-000N0UE240H
40F
CXA1507-0000-000N0UE240F
E4 635 709 CXA1507-0000-000N0UE440H CXA1507-0000-000N0UE440F
F2 680 759 CXA1507-0000-000N0UF240H CXA1507-0000-000N0UF240F
F4 730 815 CXA1507-0000-000N0UF440H CXA1507-0000-000N0UF440F
1212
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA
2-Step 4-Step
Min Typ Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
Chromaticity
Region Order Code Chromaticity
Region Order Code
3500 K
80 ---
F2 680 759
35H
CXA1507-0000-000N00F235H
35F
CXA1507-0000-000N00F235F
F4 730 815 CXA1507-0000-000N00F435H CXA1507-0000-000N00F435F
G2 780 871 CXA1507-0000-000N00G235H CXA1507-0000-000N00G235F
G4 840 938 CXA1507-0000-000N00G435H CXA1507-0000-000N00G435F
H2 900 1005 CXA1507-0000-000N00H235H CXA1507-0000-000N00H235F
93 95
D4 550 614
35H
CXA1507-0000-000N0YD435H
35F
CXA1507-0000-000N0YD435F
E2 590 659 CXA1507-0000-000N0YE235H CXA1507-0000-000N0YE235F
E4 635 709 CXA1507-0000-000N0YE435H CXA1507-0000-000N0YE435F
F2 680 759 CXA1507-0000-000N0YF235H CXA1507-0000-000N0YF235F
3000 K
80 ---
F2 680 759
30H
CXA1507-0000-000N00F230H
30F
CXA1507-0000-000N00F230F
F4 730 815 CXA1507-0000-000N00F430H CXA1507-0000-000N00F430F
G2 780 871 CXA1507-0000-000N00G230H CXA1507-0000-000N00G230F
G4 840 938 CXA1507-0000-000N00G430H CXA1507-0000-000N00G430F
90 ---
D4 550 614
30H
CXA1507-0000-000N0UD430H
30F
CXA1507-0000-000N0UD430F
E2 590 659 CXA1507-0000-000N0UE230H CXA1507-0000-000N0UE230F
E4 635 709 CXA1507-0000-000N0UE430H CXA1507-0000-000N0UE430F
93 95
D2 510 569
30H
CXA1507-0000-000N0YD230H
30F
CXA1507-0000-000N0YD230F
D4 550 614 CXA1507-0000-000N0YD430H CXA1507-0000-000N0YD430F
E2 590 659 CXA1507-0000-000N0YE230H CXA1507-0000-000N0YE230F
E4 635 709 CXA1507-0000-000N0YE430H CXA1507-0000-000N0YE430F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C) - CONTINUED
1313
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA
2-Step 4-Step
Min Typ Group
Flux
(lm) @
85 °C
Flux
(lm) @
25 °C*
Chromaticity
Region Order Code Chromaticity
Region Order Code
2700 K
80 ---
E4 635 709
27H
CXA1507-0000-000N00E427H
27F
CXA1507-0000-000N00E427F
F2 680 759 CXA1507-0000-000N00F227H CXA1507-0000-000N00F227F
F4 730 815 CXA1507-0000-000N00F427H CXA1507-0000-000N00F427F
G2 780 871 CXA1507-0000-000N00G227H CXA1507-0000-000N00G227F
G4 840 938 CXA1507-0000-000N00G427H CXA1507-0000-000N00G427F
90 ---
C4 475 530
27H
CXA1507-0000-000N0UC427H
27F
CXA1507-0000-000N0UC427F
D2 510 569 CXA1507-0000-000N0UD227H CXA1507-0000-000N0UD227F
D4 550 614 CXA1507-0000-000N0UD427H CXA1507-0000-000N0UD427F
E2 590 659 CXA1507-0000-000N0UE227H CXA1507-0000-000N0UE227F
93 95
C4 475 530
27H
CXA1507-0000-000N0YC427H
27F
CXA1507-0000-000N0YC427F
D2 510 569 CXA1507-0000-000N0YD227H CXA1507-0000-000N0YD227F
D4 550 614 CXA1507-0000-000N0YD427H CXA1507-0000-000N0YD427F
E2 590 659 CXA1507-0000-000N0YE227H CXA1507-0000-000N0YE227F
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C) - CONTINUED
1414
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C)
The following table provides order codes for XLamp CXA1507 LEDs. For a complete description of the order code
nomenclature, please see the Bin and Order Code Formats section (page 27).
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
6500 K
70 75
G2 780 871
1A0, 1B0, 1C0, 1D0
CXA1507-0000-000N00G20E1
G4 840 938 CXA1507-0000-000N00G40E1
H2 900 1005 CXA1507-0000-000N00H20E1
H4 970 1084 CXA1507-0000-000N00H40E1
80 ---
F4 730 815
1A0, 1B0, 1C0, 1D0
CXA1507-0000-000N0HF40E1
G2 780 871 CXA1507-0000-000N0HG20E1
G4 840 938 CXA1507-0000-000N0HG40E1
H2 900 1005 CXA1507-0000-000N0HH20E1
5700 K
70 75
G2 780 871
2A0, 2B0, 2C0, 2D0
CXA1507-0000-000N00G20E2
G4 840 938 CXA1507-0000-000N00G40E2
H2 900 1005 CXA1507-0000-000N00H20E2
H4 970 1084 CXA1507-0000-000N00H40E2
80 ---
F4 730 815
2A0, 2B0, 2C0, 2D00
CXA1507-0000-000N0HF40E2
G2 780 871 CXA1507-0000-000N0HG20E2
G4 840 938 CXA1507-0000-000N0HG40E2
H2 900 1005 CXA1507-0000-000N0HH20E2
1515
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
5000 K
70 75
G2 780 871
3A0, 3B0, 3C0, 3D0
CXA1507-0000-000N00G20E3
G4 840 938 CXA1507-0000-000N00G40E3
H2 900 1005 CXA1507-0000-000N00H20E3
H4 970 1084 CXA1507-0000-000N00H40E3
80 ---
F4 730 815
3A0, 3B0, 3C0, 3D0
CXA1507-0000-000N0HF40E3
G2 780 871 CXA1507-0000-000N0HG20E3
G4 840 938 CXA1507-0000-000N0HG40E3
H2 900 1005 CXA1507-0000-000N0HH20E3
90 95
E4 635 709
3A0, 3B0, 3C0, 3D0
CXA1507-0000-000N0UE40E3
F2 680 759 CXA1507-0000-000N0UF20E3
F4 730 815 CXA1507-0000-000N0UF40E3
G2 781 871 CXA1507-0000-000N0UG20E3
4000 K
70 75
F4 730 815
5A0, 5B0, 5C0, 5D0
CXA1507-0000-000N00F40E5
G2 780 871 CXA1507-0000-000N00G20E5
G4 840 938 CXA1507-0000-000N00G40E5
H2 900 1005 CXA1507-0000-000N00H20E5
H4 970 1084 CXA1507-0000-000N00H40E5
80 ---
F4 780 815
5A0, 5B0, 5C0, 5D0
CXA1507-0000-000N0HF40E5
G2 780 871 CXA1507-0000-000N0HG20E5
G4 840 938 CXA1507-0000-000N0HG40E5
H2 900 1005 CXA1507-0000-000N0HH20E5
90 95
E2 590 659
5A0, 5B0, 5C0, 5D0
CXA1507-0000-000N0UE20E5
E4 635 709 CXA1507-0000-000N0UE40E5
F2 680 759 CXA1507-0000-000N0UF20E5
F4 730 815 CXA1507-0000-000N0UF40E5
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C) - CONTINUED
1616
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
3500 K
80 ---
F2 680 759
6A0, 6B0, 6C0, 6D0
CXA1507-0000-000N00F20E6
F4 730 815 CXA1507-0000-000N00F40E6
G2 780 871 CXA1507-0000-000N00G20E6
G4 840 938 CXA1507-0000-000N00G40E6
H2 900 1005 CXA1507-0000-000N00H20E6
93 95
D4 550 614
6A0, 6B0, 6C0, 6D0
CXA1507-0000-000N0YD40E6
E2 590 659 CXA1507-0000-000N0YE20E6
E4 635 709 CXA1507-0000-000N0YE40E6
F2 680 759 CXA1507-0000-000N0YF20E6
3000 K
80 ---
F2 680 759
7A0, 7B0, 7C0, 7D0
CXA1507-0000-000N00F20E7
F4 730 815 CXA1507-0000-000N00F40E7
G2 780 871 CXA1507-0000-000N00G20E7
G4 840 938 CXA1507-0000-000N00G40E7
90 ---
D4 550 614
7A0, 7B0, 7C0, 7D0
CXA1507-0000-000N0UD40E7
E2 590 659 CXA1507-0000-000N0UE20E7
E4 635 709 CXA1507-0000-000N0UE40E7
93 95
D2 510 569
7A0, 7B0, 7C0, 7D0
CXA1507-0000-000N0YD20E7
D4 550 614 CXA1507-0000-000N0YD40E7
E2 590 659 CXA1507-0000-000N0YE20E7
E4 635 709 CXA1507-0000-000N0YE40E7
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C) - CONTINUED
1717
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® CXa1507 LED
Notes
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 30).
• Cree XLamp CXA1507 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins
higher than the minimum specied by the order code without advance notice. Shipments will always adhere to the chromaticity
bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
CCT
Range
CRI
Base Order Codes
Min. Luminous Flux
@ 200 mA Chromaticity Regions Order Code
Min Typ Group Flux (lm)
@ 85 °C
Flux (lm)
@ 25 °C*
2700 K
80 ---
E4 635 709
8A0, 8B0, 8C0, 8D0
CXA1507-0000-000N00E40E8
F2 680 759 CXA1507-0000-000N00F20E8
F4 730 815 CXA1507-0000-000N00F40E8
G2 780 871 CXA1507-0000-000N00G20E8
G4 840 938 CXA1507-0000-000N00G40E8
90 ---
C4 475 530
8A0, 8B0, 8C0, 8D0
CXA1507-0000-000N0UC40E8
D2 510 569 CXA1507-0000-000N0UD20E8
D4 550 614 CXA1507-0000-000N0UD40E8
E2 5901 659 CXA1507-0000-000N0UE20E8
93 95
C4 475 530
8A0, 8B0, 8C0, 8D0
CXA1507-0000-000N0YC40E8
D2 510 569 CXA1507-0000-000N0YD20E8
D4 550 614 CXA1507-0000-000N0YD40E8
E2 590 659 CXA1507-0000-000N0YE20E8
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - 36 V (IF = 200 mA,
TJ = 85 °C) - CONTINUED
1818
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® CXa1507 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
The following graph is the result of a series of pulsed measurements at 400 mA for the 18-V CXA1507 LED and 200 mA
for the 36-V CXA1507 LED and TJ = 85 °C.
Relative Spectral Power Distribution
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
380 430 480 530 580 630 680 730 780
Relative Spectral Power
Wavelength (nm)
5000K, 70 CRI
4000K, 70 CRI
3000K, 80 CRI
3000K, 93 CRI
1919
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp® CXa1507 LED
ELECTRICAL CHARACTERISTICS
The following graphs are the result of a series of steady-state measurements.
16.5
17.0
17.5
18.0
18.5
19.0
19.5
200 250 300 350 400 450 500 550 600 650 700 750
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
33
34
35
36
37
38
39
100 125 150 175 200 225 250 275 300 325 350 375
Voltage (V)
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
2020
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp® CXa1507 LED
RELATIVE LUMINOUS FLUX
The relative luminous ux values provided below are the ratio of:
• Measurements of CXA1507 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 400 mA at TJ = 85 °C for the 18-V CXA1507 LED.
Using the 18-V CXA1507 LED as an example, at steady-state operation of Tc = 25 °C, IF = 650 mA, the relative luminous
ux ratio is 160% in the chart below. A CXA1507 LED that measures 710 lm during binning will deliver 1136 lm (710 *
1.6) at steady-state operation of Tc = 25 °C, IF = 650 mA.
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200 250 300 350 400 450 500 550 600 650 700 750
Relative Luminous Flux
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
18 V
2121
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp® CXa1507 LED
RELATIVE LUMINOUS FLUX - CONTINUED
The relative luminous ux values provided below are the ratio of:
• Measurements of CXA1507 at steady-state operation at the given conditions, divided by
• Flux measured during binning, which is a pulsed measurement at 200 mA at TJ = 85 °C for the 36-V CXA1507 LED.
Using the 36-V CXA1507 LED as an example, at steady-state operation of Tc = 25 °C, IF = 325 mA, the relative luminous
ux ratio is 150% in the chart below. A CXA1507 LED that measures 710 lm during binning will deliver 1136 lm (710 *
1.6) at steady-state operation of Tc = 25 °C, IF = 325 mA.
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
100 125 150 175 200 225 250 275 300 325 350 375
Relative Luminous Flux
Current (mA)
Tc = 25 °C
Tc = 55 °C
Tc = 85 °C
Tc = 105 °C
36 V
2222
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp® CXa1507 LED
TYPICAL SPATIAL DISTRIBUTION
PERFORMANCE GROUPS - BRIGHTNESS (18 V, IF = 400 mA; 36 V, IF = 200 mA, TJ = 85 °C)
XLamp CXA1507 LEDs are tested for luminous ux and placed into one of the following bins.
Group Code Min. Luminous Flux Max. Luminous Flux
C4 475 510
D2 510 550
D4 550 590
E2 590 635
E4 635 680
F2 680 730
F4 730 780
G2 780 840
G4 840 900
H2 900 970
H4 970 1040
J2 1040 1120
Far Field
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
2323
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp® CXa1507 LED
PERFORMANCE GROUPS - CHROMATICITY (TJ = 85 °C)
XLamp CXA1507 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding
coordinates.
EasyWhite Color Temperatures – 4-Step
Code CCT x y
65F 6500 K
0.3097 0.3196
0.3079 0.3297
0.3164 0.3382
0.3176 0.3275
57F 5700 K
0.3253 0.3325
0.3249 0.3439
0.3331 0.3514
0.3330 0.3393
50F 5000 K
0.3407 0.3459
0.3415 0.3586
0.3499 0.3654
0.3484 0.3521
40F 4000 K
0.3744 0.3685
0.3782 0.3837
0.3912 0.3917
0.3863 0.3758
35F 3500 K
0.3981 0.3800
0.4040 0.3966
0.4186 0.4037
0.4116 0.3865
30F 3000 K
0.4242 0.3919
0.4322 0.4096
0.4449 0.4141
0.4359 0.3960
27F 2700 K
0.4475 0.3994
0.4573 0.4178
0.4695 0.4207
0.4589 0.4021
EasyWhite Color Temperatures – 2-Step
Code CCT x y
50H 5000 K
0.3429 0.3507
0.3434 0.3571
0.3475 0.3604
0.3469 0.3539
40H 4000 K
0.3784 0.3741
0.3804 0.3818
0.3867 0.3857
0.3844 0.3778
35H 3500 K
0.4030 0.3857
0.4061 0.3941
0.4132 0.3976
0.4099 0.3890
30H 3000 K
0.4291 0.3973
0.4333 0.4062
0.4395 0.4084
0.4351 0.3994
27H 2700 K
0.4528 0.4046
0.4578 0.4138
0.4638 0.4152
0.4586 0.4060
2424
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp® CXa1507 LED
PERFORMANCE GROUPS - CHROMATICITY (TJ = 85 °C) - CONTINUED
ANSI White Bins
Code CCT Bin
Code x y
0E1 6500 K
1A0
0.3048 0.3207
0.3130 0.3290
0.3144 0.3186
0.3068 0.3113
1B0
0.3028 0.3304
0.3115 0.3391
0.3130 0.3290
0.3048 0.3207
1C0
0.3115 0.3391
0.3205 0.3481
0.3213 0.3373
0.3130 0.3290
1D0
0.3130 0.3290
0.3213 0.3373
0.3221 0.3261
0.3144 0.3186
ANSI White Bins
Code CCT Bin
Code x y
0E2 5700 K
2A0
0.3215 0.3350
0.3290 0.3417
0.3290 0.3300
0.3222 0.3243
2B0
0.3207 0.3462
0.3290 0.3538
0.3290 0.3417
0.3215 0.3350
2C0
0.3290 0.3538
0.3376 0.3616
0.3371 0.3490
0.3290 0.3417
2D0
0.3290 0.3417
0.3371 0.3490
0.3366 0.3369
0.3290 0.3300
ANSI White Bins
Code CCT Bin
Code x y
0E6 3500 K
6A0
.3889 .3690
.3941 .3848
.4080 .3916
.4017 .3751
6B0
.3941 .3848
.3996 .4015
.4146 .4089
.4080 .3916
6C0
.4080 .3916
.4146 .4089
.4299 .4165
.4221 .3984
6D0
.4017 .3751
.4080 .3916
.4221 .3984
.4147 .3814
ANSI White Bins
Code CCT Bin
Code x y
0E5 4000 K
5A0
.3670 .3578
.3702 .3722
.3825 .3798
.3783 .3646
5B0
.3702 .3722
.3736 .3874
.3869 .3958
.3825 .3798
5C0
.3825 .3798
.3869 .3958
.4006 .4044
.3950 .3875
5D0
.3783 .3646
.3825 .3798
.3950 .3875
.3898 .3716
ANSI White Bins
Code CCT Bin
Code x y
0E3 5000 K
3A0
.3371 .3490
.3451 .3554
.3440 .3427
.3366 .3369
3B0
.3376 .3616
.3463 .3687
.3451 .3554
.3371 .3490
3C0
.3463 .3687
.3551 .3760
.3533 .3620
.3451 .3554
3D0
.3451 .3554
.3533 .3620
.3515 .3487
.3440 .3427
2525
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp® CXa1507 LED
PERFORMANCE GROUPS - CHROMATICITY (TJ = 85 °C) - CONTINUED
CREE EASYWHITE® BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85 °C)
ANSI White Bins
Code CCT Bin
Code x y
0E7 3000 K
7A0
.4147 .3814
.4221 .3984
.4342 .4028
.4259 .3853
7B0
.4221 .3984
.4299 .4165
.4430 .4212
.4342 .4028
7C0
.4342 .4028
.4430 .4212
.4562 .4260
.4465 .4071
7D0
.4259 .3853
.4342 .4028
.4465 .4071
.4373 .3893
ANSI White Bins
Code CCT Bin
Code x y
0E8 2700 K
8A0
.4373 .3893
.4465 .4071
.4582 .4099
.4483 .3919
8B0
.4465 .4071
.4562 .4260
.4687 .4289
.4582 .4099
8C0
.4582 .4099
.4687 .4289
.4813 .4319
.4700 .4126
8D0
.4483 .3919
.4582 .4099
.4700 .4126
.4593 .3944
2700K
3000K
3500K
4000K
4500K
5000K
5700K
6500K
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 4 -step
EasyWhite 2-step
2626
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp® CXa1507 LED
CREE ANSI WHITE BINS PLOTTED ON THE 1931 CIE COLOR SPACE (TJ = 85 °C)
2700K
3000K
3500K
4000K
4500K
5000K
5700K
6500K
8000K
6A
6B
6C
6D
7A
7B
7C
7D 8A
8B
8C
8D
3A
3B
3C
3D
5A
5B
5C
5D
1A
1B
1C
1D
2A
2B
2C
2D
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
CCy
CCx
ANSI C78.377 Quadrangle
2727
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp® CXa1507 LED
BIN AND ORDER CODE FORMATS
Bin codes and order codes are congured as follows:
Order Code Bin Code
MECHANICAL DIMENSIONS
Dimensions are in mm.
Tolerances unless otherwise
specied: +.13
x° +1°
SSSSSCC-HHHH-HHHGGNNNNNN
Series = CXA15
Internal code
CRI Specification
0 = Standard CRI
H = 80 min CRI
U = 90 min CRI
Y = 93 min CRI
Kit code
Vf class: F0 = 18-V class
N0 = 36-V class
Performance class
SSSSSCC-WWW-FF-GGR-AAAAA
Series = CXA15
Chromaticity bin
Vf class: F0 = 18-V class
N0 = 36-V class
Internal code
CRI Specification
B = 70 min CRI
H = 80 min CRI
U = 90 min CRI
Y = 93 min CRI
Flux bin
Performance class
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
15.85
±0.2
15.85
±0.2
5.5
3.3
±0.2
10.5
2.6
2.6
2.6
2.6
1.15 ± .15
R
4X
.5
0.55 ± 0.1
1.3
1.3
1.3
1.3
3/18.000
A
LE1601
LE1601 MARKETING SPEC
05/08/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
TOLERANCE UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MM
.X ± .10
.XX ± .03
.XXX ± .010
X ° ± 1 °
1.3
8.9
± 0.2
Tc
2828
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp® CXa1507 LED
THERMAL DESIGN
The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred
different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and
replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case
temperature (Tc). No additional calculations are required to ensure the CXA LED is being operated within its designed
limits. Please refer to page 3 for the Operating Limit specication.
There is no need to calculate for TJ inside the package, as the thermal management design process, specically from
solder point (TSP) to ambient (Ta), remains identical to any other LED component. For more information on thermal
management of Cree XLamp LEDs, please refer to the Thermal Management application note. For CXA soldering
recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to
the Cree CX Family LEDs soldering and handling document. The CX Family LED Design Guide provides basic information
on the requirements to use Cree XLamp CXA LEDs successfully in luminaire designs.
To keep the CXA1507 LED at or below the maximum rated Tc, the case to ambient
temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a value
shown on the following graphs, depending on the operating environment. The y-axis in
the graphs is a base 10 logarithmic scale.
As the gure at right shows, the R_c‑a value is the sum of the thermal resistance of the
TIM (R_tim) plus the thermal resistance of the heat sink (R_hs).
R_j-c
Tc
R_tim
R_hs
Ta
R_j-c
Tc
R_c-a
Ta
CXA1507 - 18 V
0.01
0.10
1.00
10.00
100.00
200 250 300 350 400 450 500 550 600 650 700 750
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
18 V
2929
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp® CXa1507 LED
THERMAL DESIGN - CONTINUED
CXA1507 - 36 V
0.01
0.10
1.00
10.00
100.00
100 125 150 175 200 225 250 275 300 325 350 375
Maximum R_c-a
Current (mA)
Ta = 25 °C
Ta = 55 °C
Ta = 85 °C
Ta = 105 °C
36 V
3030
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLamp® CXa1507 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity and CRI measurements in this document are binning specications
only and solely represent product measurements as of the date of shipment. These measurements will change over
time based on a number of factors that are not within Cree’s control and are not intended or provided as operational
specications for the products. Calculated values are provided for informational purposes only and are not intended as
specications.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED
lumen maintenance. For information on the specic LM‑80 data sets available for this LED, refer to the public LM-80
results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing
and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient
temperature, and drive current affect the LED junction temperature.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to
as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU
Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained
from your Cree representative or from the Product Documentation sections of www.cree.com.
REACh Compliance
REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical
Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,
please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned
substance information (REACh Article 67) is also available upon request.
UL® Recognized Component
Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a re and electrical
enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and
eye safety, please refer to the LED Eye Safety application note.
3131
Copyright © 2012-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are
registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
31
XLamp® CXa1507 LED
PACKAGING
Cree CXA1507 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton,
for a total of 100 LEDs per carton. Each carton contains 100 LEDs from the same performance bin.
Dimensions are in inches.
Tolerances: +.13
x° +1°
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
LABEL WITH CREE
BIN CODE, QTY, LOT#
LABEL WITH CREE
BIN CODE, QTY, LOT#
BAG
LABEL WITH CREE
BIN CODE, QTY, LOT#
PATENT LABEL
IS LOCATED ON UNDERSIDE OF
CARTON
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.1
X° ± 2 °
.XXX ± .010
.XX ± .03
.X ± .06
FOR SHEET METAL PARTS ONLY
.XX ± .05
.XXX ± .005
X° ± 1 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 361-4770
Fax (919) 313-5303
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
5.875
5.875
.38
R.375
.875
.875
1/10.500
A
CXA15XX_DATASHEET_BAG2013
CXA15XX_DATASHEET
LABEL WITH CREE
BIN CODE, QTY, LOT#
LABEL WITH CREE
BIN CODE, QTY, LOT#
BAG
LABEL WITH CREE
BIN CODE, QTY, LOT#
PATENT LABEL
IS LOCATED ON UNDERSIDE OF
CARTON