VL CONNECTOR Crimp Disconnectable Crimp style connectors 6.2mm (.244") pitch Features ------------------------ * Housing lances for contact retention Since the contact retention lances are part of the housing rather than protruding from the contact, they cannot be damaged by handling. They allow the contact to be easily inserted and securely locked into the housing. * Secondary retainer The secondary retainer is optionally available. This retainer ensures that the contacts are fully seated and locked in the housing and prevents their accidental release. Installed after the contacts are inserted, the secondary retainer locks and secures the contacts. * Suited for circuits with high power requirements Since these contacts have large cross-sectional areas and high contact pressure, they can accommodate circuits requiring high power. * Two kinds of connections The VL connectors can be used for wire-to-wire or wire-to-board connections. a L JS T 0 This 6.2mm (.244") pitch wire-to-board connector is designed for circuits with high power requirements. Specifications ------------------- * Current rating: 20A AC, DC * Voltage rating: 600V AC, DC * Temperature range: -25C to +90C (including temperature rise in applying electrical current) * Contact resistance: Initial value/7m max. After environmental testing/10m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 2,000V AC/minute * Applicable wire: AWG #20 to #12 * Applicable PC board thickness: 1.6mm(.063") * Contact JST for details. Note: The current rating differs depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Current unit:A Circuits *2(3) 3 4 6 8 12 #12 #14 Wire size(AWG) #16 20 17 16 15 14 13 15 14 13 12 11 10 10 9 9 8 7 7 #18 8 8 7 7 6 6 #20 6 6 6 5 5 4 Note: Do not branch in parallel current which exceeds the rated current (eg. more than 17A in the case of 3 circuits with AWG #12). If branched in parallel, current imbalance or other problems may develop. If it is absolutely necessary to branch such a large current in parallel, design the circuits without causing any imbalance and provide an extra margin for each circuit. Standards ---------------------- 0 1 2 Recognized E60389 Certified LR20812 R9351103 167 VL CONNECTOR Contact ----------------------------------------------------------------- Applicable wire 4.1(.161) Model No. 16.7(.657) 3.6 3.7 (.142) (.146) Q'ty / reel mm2 AWG # Insulation O.D. mm(in.) SVF-42T-P2.0 0.3 to 1.25 22 to 16 1.7 to 3.2(.067 to .126) 2,000 SVF-61T-P2.0 0.5 to 2.0 20 to 14 1.9 to 3.4(.075 to .134) 2,000 SVF-81T-P2.0 3.5 12 4.1(.161) 2,000 3.1(.122) Material and Finish Phosphor bronze, tin-plated Note: SVF-42T-P2.0 is not TUV approved. Housing (Inter-housing lock) ------------------------------------------------ (2 circuits) (3 circuits) 13.4(.528) 19.6(.772) (4 circuits) (8 circuits) (6 circuits) 25.8(1.016) 13.4(.528) 2.8 (.110) 11.0(.433) 13.0(.512) 13.0(.512) 13.0(.512) 11.0(.433) 11.0(.433) 2.8 (.110) 2.8 (.110) 15.4(.606) L JST 15.4(.606) JST JST L 15.4(.606) 2.8 (.110) 2 3 11.0(.433) 2 13.0(.512) 4 L 4 8.4(.331) 3 6 2.8 (.110) 3 5 11.0(.433) 4 13.0(.512) 2 1 8 (12 circuits) 7 6.2(.244) 5.4(.213) L JST JST 6 L 5 8.4(.331) 19.6(.772) 6.2(.244) 6.2(.244) 6.2(.244) 38.2(1.504) 8 9 L JST 10 11 12 Model No. Q'ty / bag 2.8 (.110) 2 VLP-02V 500 3 VLP-03V 500 11.0(.433) 15.4(.606) 7 Circuits 4 VLP-04V 500 6 VLP-06V 500 8 VLP-08V 200 12 VLP-12V 100 1 2 3 4 5 6 13.0(.512) Material Nylon 66, UL94V-0, natural (white) 6.2(.244) 168 VL CONNECTOR Housing (Outer-housing lock) ----------------------------------------------- 19.6(.772) 1 L JST 5.2 (.204) 5.2 (.205) 11.0(.433) 13.0(.512) 13.0(.512) 11.0(.433) 11.0(.433) 5.2 (.208) 11.0(.433) 11.0(.433) 13.0(.512) 13.0(.512) 1 2 6.2 (.244) 6.2 (.244) 6.2 (.244) 15.4(.606) L JST 3 1 13.0(.512) 15.4(.606) 4 L JST 3 15.4(.606) 5.2 8.4(.331) (.205) 2 4 2 L JST 3 11.0(.433) 3 1 4 13.0(.512) 2 3 5.2 8.4(.331) (.205) 1 1 2 L JST L JST 6 (12 circuits) 5 6.2 (.244) 6.2 (.244) 25.8(1.016) 4 25.8(.110) 15.0(.591) (8 circuits) 8 5.2 8.4(.331) (.205) (6 circuits) 7 19.6(.772) (Single-row 4 circuits) L JST 15.0(.591) (4 circuits) 6 (3 circuits) 5 (2 circuits) 6.2 (.244) 38.2(1.504) 8 9 L JST 10 11 12 15.4(.606) 7 Circuits Model No. Q'ty / bag 2 VLP-02V-1 VLP-03V-1 VLP-04V-1 VLP-04VN-1 VLP-06V-1 VLP-08V-1 VLP-12V-1 500 1 2 3 4 5 6 5.2 (.205) 3 4 11.0(.433) 4(siugle-row) 6 8 13.0(.512) 12 500 500 500 500 200 100 Material Nylon 66, UL94V-0, natural (white) 6.2 (.244) Note: Not TUV approved. Retainer ----------------------------------------------------------------- 17.6(.693) 23.8(.937) Circuits Model No. Q'ty / bag 2, 4 VLS-02V 1,000 3, 6 VLS-03V 1,000 4(single-row),8 VLS-08V 1,000 12 VLS-12V 1,000 (12 circuits) 9.4(.370) 9.4(.370) 5.9 (.232) 36.2(1.425) 5.9 (.232) 9.4(.370) 11.4(.449) 5.9 (.232) (Single-row 4 circuits, 8 circuits) 9.4(.370) (3, 6 circuits) 5.9 (.232) (2, 4 circuits) Material Glass-filled nylon 66, UL94V-0, natural (ivory) 169 VL CONNECTOR Shrouded header --------------------------------------------------------- (2, 3 circuits) 11.2(.441) 8.2(.323) 18.0(.709) 15.0(.591) B 3.6 (.142) 1.8 (.071) 6.2(.244) A 1.6 (.063) 4.84(.191) 1.8 (.071) 6.2(.244) A 2.0 (.079) Model No. 1.6 (.063) 8.28(.326) A B Q'ty / box 2 B02P-VL 6.2( .244) 13.4( .528) 100 3 B03P-VL 12.4( .488) 19.6( .772) 100 4 B04P-VL 6.2( .244) 13.4( .528) 100 B04P-VL-VN-1.8 18.6( .732) 26.2(1.031) 100 6 B06P-VL 12.4( .488) 19.6( .772) 50 8 B08P-VL 18.6( .732) 26.2(1.031) 50 12 B12P-VL 31.0(1.220) 38.6(1.520) 40 4(single-row) 3.6 (.142) 16.4(.646) 16.4(.646) B Dimensions mm(in.) Circuits (4, 6 circuits) Material (Single-row 4 circuits) (8, 12 circuits) 11.2(.441) 8.2(.323) B Post: Copper-alloy, tin-plated Wafer: Nylon 66, UL94V-0, natural (white) 18.0(.709) 15.0(.591) B 1.8(.071) 6.2(.244) A 3.6 (.142) 3.6 (.142) 16.4(.646) 16.4(.646) Note: B04P-VL-VN-1.8, B08P-VL and B12P-VL are not TUV approved. 1.6(.063) 4.84 (.191) 2.0 (.079) 1.6(.063) 8.28(.326) 1.8(.071) 6.2(.244) A Contact position location numbers------------------------------------------- (8 circuits) 2 4 1 3 L JST 6 12 4 8 5 11 3 7 4 10 2 6 3 9 1 5 2 8 1 7 L JST 3 6 2 5 1 4 (12 circuits) L JST L JST 2 1 3 2 1 (6 circuits) (4 circuits) L JST <Inter-housing lock> (3 circuits) (2 circuits) L JST 1 1 4 3 3 2 L JST 1 (6 circuits) 3 6 2 5 1 4 L JST (8 circuits) (12 circuits) 6 12 4 8 5 11 3 7 4 10 2 6 3 9 2 8 1 7 1 5 L JST 170 L JST 2 L JST L JST 1 2 (Single-row 4 circuits) 4 3 L JST 2 (4 circuits) L JST <Outer-housing lock> (2 circuits) (3 circuits) VL CONNECTOR PC board layout (viewed from soldering side) and Assembly layout ------------------- (4, 6, 8, 12 circuits) 2.1 0.05 (.083.002)dia. 8.28 0.05 (.326.002)dia. 29.2(1.150) 6.8 (.268)min. Single-row 4 circuits: 1.80.05 (.071.002)dia. 3 circuits: 2.10.05 (.083.002)dia. 19.3(.760) 12.4 0.1 3.6 (.488.004)dia. (.142)min. 6.20 0.05 (.244.002)dia. 29.2(1.150) 13.2(.520) 12.4 0.1 3.6 (.488.004)dia. (.142)min. 6.20 0.05 (.244 .002)dia. 3.4 (.134)min. (2, 3, Single-row 4 circuits) <Inter-housing lock> <Inter-housing lock> 21.7(.854) 29.2(1.150) 29.2(1.150) 14.6(.575) <Outer-housing lock> <Outer-housing lock> Note: 1. Tolerances are non-cumulative: 0.05mm(.002") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Applicator for the semi-automatic press AP-K2N ------------------------------- Contact SVF-42T-P2.0 SVF-61T-P2.0 SVF-81T-P2.0 Crimp applicator MKS-L with safety cover without safety cover Compact crimp applicator MKS-LS with safety cover without safety cover Strip-crimp applicator MKS-SC with safety cover APLMK SVF/M42-20 APLNC SVF/M42-20 - - - APLMK SVF/M61-20 APLNC SVF/M61-20 - - - APLMK SVF/M81-20 APLNC SVF/M81-20 - - - 171