SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL21C150JBANNND CAP, 15, 50V, 5%, C0G, 0805 Description : Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series Size Dielectric CL 21 C 150 J B A N N N D Samsung Multi-layer Ceramic Capacitor 0805 (inch code) L: 2.0 0.1 C0G 15 5 % Capacitance Capacitance tolerance 50 V Rated Voltage 0.65 0.1 Thickness mm mm 1.25 0.1 W: Inner electrode Ni Termination Cu Plating Sn 100% mm (Pb Free) Product Normal Special Reserved for future use Packaging Cardboard Type,13"reel(10,000ea) B. Samsung Reliability Test and Judgement condition Performance Within specified tolerance Test condition 110% 0.5~5Vrms More than 500Mohm Rated Voltage 60~120 sec. Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Visual inspection 300% of the rated voltage Voltage mechanical breakdown Temperature C0G Characteristics Adhesive Strength (From -55 to 125, Capacitance change should be within 30PPM/) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : within 5% Capacitance 700 min Q Insulation Resistance Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : within 2.5% Soldering heat Tan , IR : initial spec. Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 2.5% Test condition Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) Moisture Capacitance change : within 7.5% 2hours 3 direction (x, y, z) With rated voltage Resistance Q: 402, 90~95%RH, 500 +12/-0 hour IR : 150 min More than 25* High Temperature Capacitance change : within 3% Resistance Q: IR : 312.5 min More than 50* With 200% of the rated voltage Max. operating temperature 1000+48/-0 hour Temperature Capacitance change : within 2.5% 1 cycle condition Cycling Tan , IR : initial spec. Min. operating temperature 25 25 Max. operating temperature 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.