PR3004G-T - Diodes Incorporated

DS27003 Rev. 7 - 3

1 of 3

www.diodes.com

PR3001G - PR3007G

NOT RECOMMENDE D

FOR NEW DESIGN PR3001G - PR3007G

3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER

Features

• Glass Passivated Die Construction

• Fast Switching for High Efficiency

• Surge Overload Rating to 125A Peak

• Low Reverse Leakage Current

• Lead Free Finish, RoHS Compliant (Note 4)

Mechanical Data

• Case: DO-201AD

• Case Material: Molded Plastic. UL Flammability Classification

Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020C

• Terminals: Finish ⎯ Tin. Plated Leads Solderable per

MIL-STD-202, Method 208

• Polarity: Cathode Band

• Marking: Type Number

• Ordering Information: See Page 3

• Weight: 1.12 grams (approximate)

DO-201AD

Dim Min Max

A 25.40 ⎯

B 7.20 9.50

C 1.20 1.30

D 4.80 5.30

All Dimensions in mm

Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic Symbol

3001G PR

3002G PR

3003G PR

3004G PR

3005G PR

3006G PR

3007G Unit

Peak Repetitive Reverse Voltage

Working Peak Reverse Voltage

DC Blocking Voltage (Note 5)

VRRM

VRWM

VR 50 100 200 400 600 800 1000 V

RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V

Average Rectified Output Current

(Note 1) @ TA = 55°CIO 3.0 A

Non-Repetitive Peak Forward Surge Current 8.3ms

Single Half Sine-Wave Superimposed on Rated Load IFSM 125 A

Forward Voltage @ IF = 3.0A VFM 1.3 V

Peak Reverse Current @ TA = 25°C

at Rated DC Blocking Voltage (Note 5) @ TA = 125°CIRM 5.0

100 μA

Reverse Recovery Time (Note 3) trr 150 250 500 ns

Typical Total Capacitance (Note 2) CT 50 pF

Typical Thermal Resistance Junction to Ambient RθJA 32 °C/W

Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C

Notes: 1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.

2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.

3. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5.

4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.

5. Short duration pulse test used to minimize self-heating effect.

DS27003 Rev. 7 - 3

2 of 3

www.diodes.com

PR3001G - PR3007G

NOT RECOMMENDE D

FOR NEW DESIGN

0 2550 75100125150175

I, AVE

IED

CURRENT (A)

(AV)

T , AMBIENT TEMPERAT URE (°C)

Fig. 1 Forward Derating Curve

Single phase half wave

Resi stive or In ductive load

0.01

0.1

1.0

0.6 0.8 1.0 1.2

I, I

(A )

V , IN STANTAN EO US FORWAR D VOLTAGE ( V)

Fig. 2 Typi cal Fo r w ar d Ch ar act er istics

T = 25°C

100

200

110100

EAK

D S

(A )

FSM

NUMBER OF CYCLES AT 60 Hz

Fig. 3 Peak Forward Surge Current

100

110100

E (p

)

V , REVERSE VOL TAGE (V)

Fig. 4 Typical Total Capacitance

DS27003 Rev. 7 - 3

3 of 3

www.diodes.com

PR3001G - PR3007G

NOT RECOMMENDE D

FOR NEW DESIGN

Ordering Information (Note 6)

Device Packaging Shipping

PR3001G-B DO-201AD 500/Bulk

PR3001G-T DO-201AD 1.2K/Tape & Reel, 13-inch

PR3002G-B DO-201AD 500/Bulk

PR3002G-T DO-201AD 1.2K/Tape & Reel, 13-inch

PR3003G-B DO-201AD 500/Bulk

PR3003G-T DO-201AD 1.2K/Tape & Reel, 13-inch

PR3004G-B DO-201AD 500/Bulk

PR3004G-T DO-201AD 1.2K/Tape & Reel, 13-inch

PR3005G-B DO-201AD 500/Bulk

PR3005G-T DO-201AD 1.2K/Tape & Reel, 13-inch

PR3006G-B DO-201AD 500/Bulk

PR3006G-T DO-201AD 1.2K/Tape & Reel, 13-inch

PR3007G-B DO-201AD 500/Bulk

PR3007G-T DO-201AD 1.2K/Tape & Reel, 13-inch

Notes: 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf.

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the

application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or

trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume

all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated

website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.

Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and

hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or

indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings

noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express

written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the

labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the

failure of the life support device or to affect its safety or effectiveness.

Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and

acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y

use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related

information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its

representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.