MS3476W8-33PW - CORSAIR ELECTRICAL CONNECTORS INC.

MS3476F

INCH-POUND

4 June 2009

SUPERSEDING

MS3476E

31 October 1988

DETAIL SPECIFICATION SHEET

CONNECTORS, PLUG, ELECTRICAL, SERIES 2,

CRIMP TYPE, BAYONET COUPLING, CLASSES A, D, L, T, W AND Z

Reactivated after 4 June 2009, and may be used

for new or existing designs and acquisitions.

This specification is approved for use by all Departments

and Agencies of the Department of Defense.

The requirements for acquiring the product described herein

shall consist of this specification sheet and MIL-DTL-26482.

NOTE: For “XX”, note 5 and table I for contact cavities requiring reduced dimensions.

FIGURE 1. Plug, dimensions.

AMSC N/A FSC 5935

Source: https://assist.dla.mil -- Downloaded: 2018-08-16T23:40Z

Check the source to verify that this is the current version before use.

MS3476F

FIGURE 1. Plug, dimensions - Continued.

Source: https://assist.dla.mil -- Downloaded: 2018-08-16T23:40Z

Check the source to verify that this is the current version before use.

MS3476F

FIGURE 1. Plug, dimensions - Continued.

Source: https://assist.dla.mil -- Downloaded: 2018-08-16T23:40Z

Check the source to verify that this is the current version before use.

MS3476F

FIGURE 1. Plug, dimensions - Continued.

Source: https://assist.dla.mil -- Downloaded: 2018-08-16T23:40Z

Check the source to verify that this is the current version before use.

MS3476F

Max weight

In lbs. (grams)

Shell

size A F S V V’ V” W

Pin Socket

8 .782

(19.86) .830

(21.08) .0204

(9.26) .0216

(9.81)

10 .926

(23.52)

2.130

(54.10) .880

(22.35) .0406

(18.43) .0421

(19.11)

12 1.043

(26.49)

1.857

(47.17) 2.265

(57.53) .950

(24.13) .0505

(22.93) .0536

(24.33)

14 1.183

(30.05) 2.355

(59.82) 1.010

(25.65) .0639

(29.01) .0692

(31.42)

16 1.305

(33.15) 2.490

(63.25) 1.070

(27.18) .0788

(35.77) .0880

(39.95)

18 1.391

(35.33)

.887

(22.53)

.363

(9.22)

.343

(8.71)

2.589

(65.76) 1.130

(28.70) .0864

(39.22) .0957

(43.44)

20 1.531

(38.89) 2.722

(69.14) 1.190

(30.23) .1016

(46.12) .1114

(50.57)

22 1.656

(42.06) 2.845

(72.26) 1.260

(32.00) .1241

(56.34) .1363

(61.88)

24 1.777

(45.14)

.825

(20.96)

.425

(10.80)

.405

(10.29)

1.507

(38.28)

2.092

(53.14)

2.967

(75.36) 1.320

(33.53) .1400

(63.56) .1916

(86.98)

1/ Less contacts and accessories. Maximum weights do not apply to class S.

Inches mm Inches mm Inches mm

.008 0.20 .065 1.66 .225 5.72

.010 0.25 .069 1.75 .269 6.83

.025 0.64 .087 2.21 .320 8.13

.029 0.74 .097 2.46 .337 8.56

.032 0.81 .101 2.57 .357 9.07

.042 1.07 .141 2.72 .399 10.13

.045 1.14 .200 5.08 .419 10.64

.046 1.17 .210 5.33 1.230 31.24

NOTES:

1. Dimensions are in inches. Metric equivalents are given for information only and are

in parentheses.

2. Unless otherwise specified, tolerances are  .005 (0.13 mm) for 3 place decimals,

 .01 (0.3 mm) for 2 place decimals, and  1 for all angles.

3. Color bands: 0.070  .031 (1.78 ± 0.79 mm) wide, color blue.

4. Connector assembly must be used with a backshell. Backshells must be procured separately.

See SAE-AS85049 for applicable backshells.

5. Insert arrangements requiring reduced diameters for raised seal barrier on outer row of contact

cavities as indicated.

FIGURE 1. Plug, dimensions - Continued.

Source: https://assist.dla.mil -- Downloaded: 2018-08-16T23:40Z

Check the source to verify that this is the current version before use.

MS3476F

TABLE I. Contact cavities requiring reduced diameters (XX) for pins and sockets

in outer row of contact cavities. 1/

Shell size Insert arrangement Contact Cavities

8 -33 & -98 A, B, C

12 -10 C, G

14 -12 A, B, C, D, E, F, G, H

14 -18 A, C, E, G, J, L

14 -19 B, D, F, H, K, M

16 -26 A, B, C, D, E, F, G, H, J, K, L, M, N, P, R

18 -32 A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S, T

22 -41

A, B, C, D, E, F, G, H, J, K, L, M, N, P, R, S,

T, U, V, W, X, Y

1/ The reduced diameter “XX” refers to the diameters of the raised seal barriers (pin barrier rings) or

lead- in chamfers (socket entry holes) to ensure proper sealing of pin and socket after mating.

See MIL-DTL-26482, connector intermateability control dimensions (series 1 and series 2) figure

for reduced diameter “XX” for contact size 20 only.

REQUIREMENTS:

Dimensions and configuration: See figure 1 and table I.

Connector mating: This connector mates with MS3470, MS3471, MS3472, MS3473, MS3474, MS3477

and MS3479.

Also, they will mate with MS3115 (dummy stowage receptacle) and with the following series 1

receptacles, provided both mating connectors contain a full compliment of power contacts: MS3100,

MS3112, MS3113, MS3114, MS3119, MS3120, MS3122, MS3124, MS3127 and MS3128.

Intermateability and rear accessory interchangeability dimensions are in accordance with

MIL-DTL-26482.

Class E is cancelled and replaced by class L.

This specification sheet supersedes, MIL-C-83723/13 and MIL-C-83723/14.

For insert arrangement, see MIL-STD-1669.

Insert arrangements requiring reduced diameters for raised seal barriers or lead-in chamfer on outer

row of contact cavities as indicated, see table I.

Connector identification marking shall be in accordance with MIL-DTL-26482. Example: MS3476L----,

minimum height does not apply to shell sizes 8, 10 and 12.

Part or Identifying Number (PIN) example:

MS3476 L 24 - 61 P W

MS number

Class

Shell size

Insert arrangement

Contact style

Alternate insert position

Source: https://assist.dla.mil -- Downloaded: 2018-08-16T23:40Z

Check the source to verify that this is the current version before use.

MS3476F

Changes from previous issue. Marginal notations are not used in this revision to identify changes with

respect to the previous issue due to the extent of the changes.

Referenced documents. In addition to MIL-DTL-26482, this document references the following:

MS3100

MS3112

MS3113

MS3114

MS3115

MS3119

MS3120

MS3122

MS3124

MS3127

MS3128

MS3470

MS3471

MS3472

MS3473

MS3474

MS3477

MS3479

MIL-STD-1669

SAE-AS85049

CONCLUDING MATERIAL

Custodians: Preparing activity:

Army – CR DLA – CC

Navy – AS

Air Force – 85 (Project: 5935–2007-188)

DLA – CC

Review activities:

Army – AR, AV

Navy – EC, SH

Air Force – 99

NOTE: The activities listed above were interested in this document as of the date of this document.

Since organizations and responsibilities can change, you should verify the currency of the information

above using the ASSIST Online database at http://assist.daps.dla.mil.

Source: https://assist.dla.mil -- Downloaded: 2018-08-16T23:40Z

Check the source to verify that this is the current version before use.