EVERLIGHT ELECTRONICS CO.,LTD.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 1 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Technical Data Sheet
Right Angle Lens Chip LEDs with Bi-Color(Multi-Color)
12-22SURSYGC/S530-A3/E3/TR8
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mulit-color type.
․Pb-free.
․The product itself will remain within RoHS compliant
version.
Descriptions
․The 12-22 SMD Taping is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Automotive: backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Type Material Emitted Color Lens Color
SUR AlGaInP Hyper Red
SYG AlGaInP
Super Yellow Green Water Clear
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Package Outline Dimensions
Polarity
For reflow soldering (propose)
3.0
2.0
1.0
0.35±0.15
0.6± 0.15
(+)
(-)
C1 C2 A
(-)
2.0±0.2
1.0
R0.44
Cathode
3.5
1.5
0.65
C1
C2
A
A
C2
C1 A
A
C2
0.9
1.5 0.9
Green
Red
Notes: Tolerances Unless Dimension ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF SUR:25
SYG:25 mA
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40~ +90 ℃
Soldering Temperature Tsol 260 (for 5
second) ℃
Electrostatic Discharge ESD 2000 V
Power Dissipation Pd SUR:60
SYG:60 mW
Peak Forward Current
(Duty 1/10 @1KHz) IF SUR:60
SYG:60 mA
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv SUR
SYG
45
31 68
42
-----
----- mcd IF=20mA
Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA
Peak Wavelength λp SUR
SYG ----- 632
575 ----- nm IF=20mA
Dominant Wavelength λd SUR
SYG
-----
-----
624
573
-----
-----
nm IF=20mA
Spectrum Radiation
Bandwidth △λ SUR
SYG ----- 20
20 ----- nm IF=20mA
Forward Voltage VF ----- 2.0 2.4 V IF=20mA
Reverse Current IR ----- ----- 10 μA VR=5V
Note
*1:Tolerance of Luminous Intensity ±15%
*2:Tolerance of Dominant Wavelength ±1nm
*3:Tolerance of Forward Voltage ±0.1V
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Typical Electro-Optical Characteristics Curves
SUR
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Typical Electro-Optical Characteristics Curves
SYG
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Aluminum moistue-proof bag LabelDesiccant
Label
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD.
12-22SURSYGC/S530-A3/E3/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 11 of 11
Device No:DSE-122-063 Prepared date: 07-26-2005 Prepared by: Malone Yu
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
