SPECIFICATION * Supplier : Samsung electro-mechanics * Samsung P/N : CL31B333KFESNNE * Product : Multi-layer Ceramic Capacitor * Description : CAP, 33, 350V, 10%, X7R, 1206 A. Samsung Part Number Series CL 31 B 333 K F E S N N E Samsung Multi-layer Ceramic Capacitor Size 1206 (inch code) Dielectric X7R Capacitance Capacitance L: 3.2 0.2 mm Inner electrode 33 10 % tolerance 1.6 0.2 W: mm Ni Termination Cu/Ag-Epoxy Plating Sn 100% Product Normal (Pb Free) Rated Voltage 350 V Special Reserved for future use Thickness 1.1 0.15 mm Packaging Embossed Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms More than 100 Rated Voltage 605 sec. Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) Apple the 500 voltage for 1~5 sec Voltage mechanical breakdown Cha Charge/ Discharge current : 50mA max Temperature X7R Characterisitcs Adhesive Strength (From -55 to 125, Capacitance change shoud be within 15%) No peeling shall be occur on the 1000gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.025 max. Resistance within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 10% Solder pot : 2605, 101sec. Performance Vibration Test Test condition Capacitance:Within the specigic tolerance Amplitude : 1.5mm Tan , IR : initial spec. From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) Humidity Capacitance change : within 15% 402, 90~95%RH, 500+12/-0hrs within 15% With rated voltage 0.05 max Tan : IR : 10Mohm Moisture Resistance Capacitance change : Tan : IR : 0.05 max High Temperature Capacitance change : Resistance Tan : IR : 402, 90~95%RH, 500+12/-0hrs 10Mohm within 15% 0.05 max With rated voltage Max. operating temperature 10Mohm 1000+48/-0hrs Charge/ Discharge current : 50mA max Temperature Capacitance change : Cycling Tan : IR : within 7.5% 0.025 max More than 100 1 cycle condition Min. operating temperatur 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.