EEU-EB1J3R3 - PANASONIC

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB

– EEE-87 –

0D±0.5

05 to08010

0d±0.05

F±0.5

Sleeve

14 min.

3 min.

(08L15 only L±1.5)=L16 : L±1.0

L20 : L±2.0

Pressure relief

06.3+

–

0D±0.5

■ Features

● Endurance : +105 °C 5000 h to 10000 h

● Hight ripple hight frequency (Hight Voltage)

● RoHS directive compliant

Radial Lead Type

Series: EB Type: A

■ Speci cations

Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C

Rated W.V. Range 10 V.DC to 63 V.DC 160 V.DC to 450 V.DC

Nominal Cap. Range 2.2 μF to 3300 μF 10 μF to 330 μF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent I < 0.01 CV or 3 (μA)

After 2 minutes ap pli ca tion of rated working voltage at +20 °C (Whichever is greater)

tan dPlease see the attached standard products list

Endurance

After following life test with DC voltage and +105 °C±2 °C ripple current value applied

(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when

the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.

(10 to 63 V.DC)

Duration : 05×11 to 08×11.5 : 5000 hours 05×15 to 06.3×15 : 7000 hours

08×15 to 012.5×25 : 10000 hours

Capacitance change ±30 % of initial measured value

tan d< 300 % of initial speciﬁ ed value

DC leakage current < initial speciﬁ ed value

(160 to 450 V.DC)

Duration : 5000 hours

Capacitance change ±20 % of initial measured value

tan d< 200 % of initial speciﬁ ed value

DC leakage current < initial speciﬁ ed value

Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

Body Dia. 0D 5 6.3 8 10 12.5 16 18

Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8

Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5

■ Frequency correction factor for ripple current

(10 ~ 63 V.DC)

Capacitance

(μF)

Frequency (Hz)

60 120 1 k 10 k 100 k

0.47 to 10 0.75 1.00 1.40 1.55 1.65

22 to 470 0.85 1.00 1.20 1.25 1.30

1000 to 3300 0.95 1.00 1.05 1.10 1.15

W. V.

(V. DC)

Frequency (Hz)

120 1 k

10 k to 30k 30 k to 100k

160 to 250 0.55 0.85 0.90 1.00

350 to 450 0.50 0.80 0.90 1.00

■ Di men sions in mm (not to scale) (Unit : mm)

01 Oct. 2013

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB

– EEE-88 –

■ Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(120 Hz)

(+105 °C)

tan d

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

Taping

✽H

(V) (μF) (mm) (mm)

(mA r.m.s.)

(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)

100 5 15 105 0.30 7000 0.5 2.0 5.0 2.5

EEUEB1A101( )

200 2000

5 11 66 0.30 5000 0.5 2.0 5.0 2.5

EEUEB1A101S( )

200 2000

220 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.5

EEUEB1A221( )

200 2000

6.3 11.2 100 0.30 5000 0.5 2.5 5.0 2.5

EEUEB1A221S( )

200 2000

470 8 15 278 0.30 10000 0.6 3.5 5.0

EEUEB1A471( )

200 1000

8 11.5 180 0.30 5000 0.6 3.5 5.0

EEUEB1A471S( )

200 1000

2200 12.5 20 540 0.32 10000 0.6 5.0 5.0

EEUEB1A222( )

200 500

3300 12.5 25 802 0.34 10000 0.6 5.0 5.0

EEUEB1A332( )

200 500

16 1000 10 20 430 0.25 10000 0.6 5.0 5.0

EEUEB1C102( )

200 500

2200 12.5 25 706 0.27 10000 0.6 5.0 5.0

EEUEB1C222( )

200 500

47 5 15 78 0.22 7000 0.5 2.0 5.0 2.5

EEUEB1E470( )

200 2000

5 11 55 0.22 5000 0.5 2.0 5.0 2.5

EEUEB1E470S( )

200 2000

100 6.3 15 135 0.22 7000 0.5 2.5 5.0 2.5

EEUEB1E101( )

200 2000

6.3 11.2 95 0.22 5000 0.5 2.5 5.0 2.5

EEUEB1E101S( )

200 2000

220 8 11.5 125 0.22 5000 0.6 3.5 5.0

EEUEB1E221S( )

200 1000

330 8 15 255 0.22 10000 0.6 3.5 5.0

EEUEB1E331( )

200 1000

470 10 16 321 0.22 10000 0.6 5.0 5.0

EEUEB1E471( )

200 500

1000 12.5 20 498 0.22 10000 0.6 5.0 5.0

EEUEB1E102( )

200 500

33 5 15 66 0.18 7000 0.5 2.0 5.0 2.5

EEUEB1V330( )

200 2000

5 11 46 0.18 5000 0.5 2.0 5.0 2.5

EEUEB1V330S( )

200 2000

220 8 15 197 0.18 10000 0.6 3.5 5.0

EEUEB1V221( )

200 1000

330 10 16 278 0.18 10000 0.6 5.0 5.0

EEUEB1V331( )

200 500

470 10 20 349 0.18 10000 0.6 5.0 5.0

EEUEB1V471( )

200 500

1000 12.5 25 586 0.18 10000 0.6 5.0 5.0

EEUEB1V102( )

200 500

0.47 5 11 4 0.15 5000 0.5 2.0 5.0 2.5

EEUEB1HR47S( )✽✽✽

200 2000

1 5 11 8 0.15 5000 0.5 2.0 5.0 2.5

EEUEB1H1R0S( )✽✽✽

200 2000

2.2 5 11 15 0.15 5000 0.5 2.0 5.0 2.5

EEUEB1H2R2S( )

200 2000

3.3 5 11 18 0.15 5000 0.5 2.0 5.0 2.5

EEUEB1H3R3S( )

200 2000

4.7 5 11 18 0.15 5000 0.5 2.0 5.0 2.5

EEUEB1H4R7S( )

200 2000

10 5 11 27 0.15 5000 0.5 2.0 5.0 2.5

EEUEB1H100S( )

200 2000

22 5 15 55 0.15 7000 0.5 2.0 5.0 2.5

EEUEB1H220( )

200 2000

5 11 39 0.15 5000 0.5 2.0 5.0 2.5

EEUEB1H220S( )

200 2000

47 6.3 15 87 0.15 7000 0.5 2.5 5.0 2.5

EEUEB1H470( )

200 2000

6.3 11.2 61 0.15 5000 0.5 2.5 5.0 2.5

EEUEB1H470S( )

200 2000

100 8 11.5 99 0.15 5000 0.6 3.5 5.0

EEUEB1H101S( )

200 1000

220 10 16 234 0.15 10000 0.6 5.0 5.0

EEUEB1H221( )

200 500

330 10 20 293 0.15 10000 0.6 5.0 5.0

EEUEB1H331( )

200 500

470 12.5 20 370 0.15 10000 0.6 5.0 5.0

EEUEB1H471( )

200 500

0.47 5 15 6 0.12 7000 0.5 2.0 5.0 2.5

EEUEB1JR47( )✽✽✽

200 2000

5 11 4.5 0.12 5000 0.5 2.0 5.0 2.5

EEUEB1JR47S( )✽✽✽

200 2000

1 5 15 12 0.12 7000 0.5 2.0 5.0 2.5

EEUEB1J1R0( )✽✽✽

200 2000

5 11 9 0.12 5000 0.5 2.0 5.0 2.5

EEUEB1J1R0S( )✽✽✽

200 2000

2.2 5 11 16.5 0.12 5000 0.5 2.0 5.0 2.5

EEUEB1J2R2S( )

200 2000

3.3 5 15 30 0.12 7000 0.5 2.0 5.0 2.5

EEUEB1J3R3( )

200 2000

5 11 20 0.12 5000 0.5 2.0 5.0 2.5

EEUEB1J3R3S( )

200 2000

4.7 5 15 30 0.12 7000 0.5 2.0 5.0 2.5

EEUEB1J4R7( )

200 2000

5 11 23 0.12 5000 0.5 2.0 5.0 2.5

EEUEB1J4R7S( )

200 2000

10 5 15 46 0.12 7000 0.5 2.0 5.0 2.5

EEUEB1J100( )

200 2000

5 11 30 0.12 5000 0.5 2.0 5.0 2.5

EEUEB1J100S( )

200 2000

22 6.3 15 55 0.12 7000 0.5 2.5 5.0 2.5

EEUEB1J220( )

200 2000

6.3 11.2 40 0.12 5000 0.5 2.5 5.0 2.5

EEUEB1J220S( )

200 2000

33 6.3 15 71 0.12 7000 0.5 2.5 5.0 2.5

EEUEB1J330( )

200 2000

6.3 11.2 50 0.12 5000 0.5 2.5 5.0 2.5

EEUEB1J330S( )

200 2000

47 8 15 94 0.12 10000 0.6 3.5 5.0

EEUEB1J470( )

200 1000

8 11.5 80 0.12 5000 0.6 3.5 5.0

EEUEB1J470S( )

200 1000

100 8 15 180 0.12 10000 0.6 3.5 5.0

EEUEB1J101( )

200 1000

220 10 20 292 0.12 10000 0.6 5.0 5.0

EEUEB1J221( )

200 500

330 12.5 20 381 0.12 10000 0.6 5.0 5.0

EEUEB1J331( )

200 500

470 12.5 25 454 0.12 10000 0.6 5.0 5.0

EEUEB1J471( )

200 500

· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.

· Please refer to the page of “Taping Dimensions”.

✽✽✽ Please kindly accept last shipment : 31/Mar/2015

Endurance : 105 °C 05×11 to 08×11.5=5000 h, 05×15 to 06.3×15=7000 h, 08×15 to 012.5×25=10000 h

01 Oct. 2013

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ EB

– EEE-89 –

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(100 kHz)

(+105 °C)

tan d

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

(V) (μF) (mm) (mm)

(mA r.m.s.)

(hours) (mm) (mm) (mm) (pcs) (pcs)

160

22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C220( ) 200 500

33 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C330( ) 200 500

47 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2C470( ) 200 500

68 12.5 25 750 0.15 5000 0.6 5.0 5.0 EEUEB2C680( ) 200 500

16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2C680S( ) 100 250

100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101( ) 100 250

18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101S( ) 100 250

150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C151 100 –

18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C151S( ) 100 250

220 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C221 100 –

18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C221S( ) 100 250

330 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2C331 50 –

200

22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2D220( ) 200 500

33 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D330( ) 200 500

47 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D470( ) 200 500

68 12.5 25 750 0.15 5000 0.6 5.0 5.0 EEUEB2D680( ) 200 500

16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2D680S( ) 100 250

100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101( ) 100 250

18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101S( ) 100 250

150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2D151 100 –

18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2D151S( ) 100 250

220 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2D221 50 –

250

22 12.5 20 560 0.15 5000 0.6 5.0 5.0 EEUEB2E220( ) 200 500

33 12.5 20 560 0.15 5000 0.6 5.0 5.0 EEUEB2E330( ) 200 500

47 12.5 25 710 0.15 5000 0.6 5.0 5.0 EEUEB2E470( ) 200 500

16 20 710 0.15 5000 0.8 7.5 7.5 EEUEB2E470S( ) 100 250

68 16 25 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680( ) 100 250

18 20 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680S( ) 100 250

100 16 31.5 1200 0.15 5000 0.8 7.5 – EEUEB2E101 100 –

18 25 1200 0.15 5000 0.8 7.5 7.5 EEUEB2E101S( ) 100 250

150 18 31.5 1470 0.15 5000 0.8 7.5 – EEUEB2E151 50 –

350

10 10 20 270 0.20 5000 0.6 5.0 5.0 EEUEB2V100( ) 200 500

22 12.5 20 350 0.20 5000 0.6 5.0 5.0 EEUEB2V220( ) 200 500

33 16 20 480 0.20 5000 0.8 7.5 7.5 EEUEB2V330S( ) 100 250

47 16 25 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470( ) 100 250

18 20 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470S( ) 100 250

68 16 31.5 780 0.20 5000 0.8 7.5 – EEUEB2V680 100 –

18 25 780 0.20 5000 0.8 7.5 7.5 EEUEB2V680S( ) 100 250

100 18 31.5 970 0.20 5000 0.8 7.5 – EEUEB2V101 50 –

400

10 10 20 250 0.24 5000 0.6 5.0 5.0 EEUEB2G100( ) 200 500

22 12.5 25 410 0.24 5000 0.6 5.0 5.0 EEUEB2G220( ) 200 500

16 20 410 0.24 5000 0.8 7.5 7.5 EEUEB2G220S( ) 100 250

33 16 25 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330( ) 100 250

18 20 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330S( ) 100 250

47 16 31.5 730 0.24 5000 0.8 7.5 – EEUEB2G470 100 –

18 25 730 0.24 5000 0.8 7.5 7.5 EEUEB2G470S( ) 100 250

450

10 12.5 20 310 0.24 5000 0.6 5.0 5.0 EEUEB2W100( ) 200 500

22 16 25 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220( ) 100 250

18 20 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220S( ) 100 250

33 16 31.5 680 0.24 5000 0.8 7.5 – EEUEB2W330( ) 100 –

18 25 680 0.24 5000 0.8 7.5 7.5 EEUEB2W330S( ) 100 250

47 18 31.5 850 0.24 5000 0.8 7.5 – EEUEB2W470 50 –

■ Standard Prod ucts

· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.

· Please refer to the page of “Taping Dimensions”.

Endurance : 105 °C 5000 h

01 Oct. 2013